component
CD14538BE
Public Made by Adomby adom
Texas Instruments Monostable Multivibrators, DIP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# CD14538BE++**Texas Instruments** · Monostable Multivibrators · DIP-16++CD14538BE from Texas Instruments, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CX1 | passive | External timing capacitor terminal for MONO1; one end of CX connects here, other end to RC1 (pin 2); minimum CX = 5000 pF per datasheet note. |+| 2 | RC1 | passive | Timing resistor/capacitor junction for MONO1; external RX connects from VDD to this pin and CX connects from this pin to CX1 (pin 1); minimum RX = 4 KΩ; pulse width T = RX × CX. |+| 3 | ~{RESET1} | input | Active-low asynchronous reset for MONO1; when asserted low immediately terminates the Q output pulse regardless of trigger state; tie to VDD when not used. |+| 4 | +TR1 | input | Leading-edge (positive) trigger input for MONO1; initiates output pulse on rising edge when -TR1 (pin 5) is held low; minimum input pulse width 140 ns at VDD = 5V. |+| 5 | -TR1 | input | Trailing-edge (negative) trigger input for MONO1; initiates output pulse on falling edge when +TR1 (pin 4) is held high; minimum input pulse width 140 ns at VDD = 5V; tie to VDD when using leading-edge mode. |+| 6 | Q1 | output | Non-inverting output of MONO1; drives high for pulse width T = RX × CX after triggering; output high source current 1 mA min at VDD = 5V, 3.2 mA min at VDD = 10V. |+| 7 | ~{Q1} | output | Inverting complement output of MONO1; drives low for the duration of pulse width T; complementary to Q1 (pin 6) at all times. |+| 8 | VSS | power_in | Negative supply (ground) reference, 0 V; all voltages referenced to this terminal. |+| 9 | ~{Q2} | output | Inverting complement output of MONO2; drives low for the duration of pulse width T; complementary to Q2 (pin 10) at all times. |+| 10 | Q2 | output | Non-inverting output of MONO2; drives high for pulse width T = RX × CX after triggering; output high source current 1 mA min at VDD = 5V, 3.2 mA min at VDD = 10V. |+| 11 | -TR2 | input | Trailing-edge (negative) trigger input for MONO2; initiates output pulse on falling edge when +TR2 (pin 12) is held high; minimum input pulse width 140 ns at VDD = 5V. |+| 12 | +TR2 | input | Leading-edge (positive) trigger input for MONO2; initiates output pulse on rising edge when -TR2 (pin 11) is held low; minimum input pulse width 140 ns at VDD = 5V. |+| 13 | ~{RESET2} | input | Active-low asynchronous reset for MONO2; when asserted low immediately terminates the Q output pulse regardless of trigger state; tie to VDD when not used. |+| 14 | RC2 | passive | Timing resistor/capacitor junction for MONO2; external RX connects from VDD to this pin and CX connects from this pin to CX2 (pin 15); minimum RX = 4 KΩ; pulse width T = RX × CX. |+| 15 | CX2 | passive | External timing capacitor terminal for MONO2; one end of CX connects here, other end to RC2 (pin 14); minimum CX = 5000 pF per datasheet note. |+| 16 | VDD | power_in | Positive supply voltage; recommended operating range 3V to 18V (full temperature range), absolute maximum 20V; quiescent current 100 µA max at VDD = 18V, 25°C. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | DIP-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CD14538BE`+- Footprint: `Package_DIP:DIP-16_W7.62mm`+- 3D model: DIP-16 (KiCad packages3D, STEP)+- 3D model files: `cd14538be-etched.step` / `cd14538be-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cd14538be.step` / `cd14538be.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cd14538b) (22 pp, sha256 `e1f0669c091291a1`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cd14538be-datasheet.pdf)
page.jsonadded+191@@ -0,0 +1,191 @@+{+ "slug": "cd14538be",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Monostable Multivibrators, DIP-16. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "logic",+ "cd14538be",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cd14538be.kicad_sym",+ "cd14538be.kicad_mod",+ "cd14538be.glb",+ "cd14538be.step",+ "cd14538be.lbr",+ "docs/hero.png",+ "docs/cd14538be-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "CD14538BE",+ "manufacturer": "Texas Instruments",+ "package": "DIP-16",+ "pin_count": 16,+ "category": "Logic",+ "subcategory": "Monostable Multivibrators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cd14538b",+ "parts": {+ "symbol": "cd14538be.kicad_sym",+ "footprint": "cd14538be.kicad_mod",+ "model_3d": "cd14538be-etched.glb",+ "model_3d_plain": "cd14538be.glb",+ "model_3d_step": "cd14538be-etched.step",+ "model_3d_step_plain": "cd14538be.step",+ "lbr": "cd14538be.lbr"+ },+ "distributor_links": {+ "lcsc": "C52457",+ "digikey": "296-14074-5-ND",+ "mouser": "595-CD14538BE"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T23:24:26Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-14074-5-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-CD14538BE",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CX1",+ "type": "passive",+ "description": "External timing capacitor terminal for MONO1; one end of CX connects here, other end to RC1 (pin 2); minimum CX = 5000 pF per datasheet note."+ },+ {+ "number": "2",+ "name": "RC1",+ "type": "passive",+ "description": "Timing resistor/capacitor junction for MONO1; external RX connects from VDD to this pin and CX connects from this pin to CX1 (pin 1); minimum RX = 4 KΩ; pulse width T = RX × CX."+ },+ {+ "number": "3",+ "name": "~{RESET1}",+ "type": "input",+ "description": "Active-low asynchronous reset for MONO1; when asserted low immediately terminates the Q output pulse regardless of trigger state; tie to VDD when not used."+ },+ {+ "number": "4",+ "name": "+TR1",+ "type": "input",+ "description": "Leading-edge (positive) trigger input for MONO1; initiates output pulse on rising edge when -TR1 (pin 5) is held low; minimum input pulse width 140 ns at VDD = 5V."+ },+ {+ "number": "5",+ "name": "-TR1",+ "type": "input",+ "description": "Trailing-edge (negative) trigger input for MONO1; initiates output pulse on falling edge when +TR1 (pin 4) is held high; minimum input pulse width 140 ns at VDD = 5V; tie to VDD when using leading-edge mode."+ },+ {+ "number": "6",+ "name": "Q1",+ "type": "output",+ "description": "Non-inverting output of MONO1; drives high for pulse width T = RX × CX after triggering; output high source current 1 mA min at VDD = 5V, 3.2 mA min at VDD = 10V."+ },+ {+ "number": "7",+ "name": "~{Q1}",+ "type": "output",+ "description": "Inverting complement output of MONO1; drives low for the duration of pulse width T; complementary to Q1 (pin 6) at all times."+ },+ {+ "number": "8",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative supply (ground) reference, 0 V; all voltages referenced to this terminal."+ },+ {+ "number": "9",+ "name": "~{Q2}",+ "type": "output",+ "description": "Inverting complement output of MONO2; drives low for the duration of pulse width T; complementary to Q2 (pin 10) at all times."+ },+ {+ "number": "10",+ "name": "Q2",+ "type": "output",+ "description": "Non-inverting output of MONO2; drives high for pulse width T = RX × CX after triggering; output high source current 1 mA min at VDD = 5V, 3.2 mA min at VDD = 10V."+ },+ {+ "number": "11",+ "name": "-TR2",+ "type": "input",+ "description": "Trailing-edge (negative) trigger input for MONO2; initiates output pulse on falling edge when +TR2 (pin 12) is held high; minimum input pulse width 140 ns at VDD = 5V."+ },+ {+ "number": "12",+ "name": "+TR2",+ "type": "input",+ "description": "Leading-edge (positive) trigger input for MONO2; initiates output pulse on rising edge when -TR2 (pin 11) is held low; minimum input pulse width 140 ns at VDD = 5V."+ },+ {+ "number": "13",+ "name": "~{RESET2}",+ "type": "input",+ "description": "Active-low asynchronous reset for MONO2; when asserted low immediately terminates the Q output pulse regardless of trigger state; tie to VDD when not used."+ },+ {+ "number": "14",+ "name": "RC2",+ "type": "passive",+ "description": "Timing resistor/capacitor junction for MONO2; external RX connects from VDD to this pin and CX connects from this pin to CX2 (pin 15); minimum RX = 4 KΩ; pulse width T = RX × CX."+ },+ {+ "number": "15",+ "name": "CX2",+ "type": "passive",+ "description": "External timing capacitor terminal for MONO2; one end of CX connects here, other end to RC2 (pin 14); minimum CX = 5000 pF per datasheet note."+ },+ {+ "number": "16",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply voltage; recommended operating range 3V to 18V (full temperature range), absolute maximum 20V; quiescent current 100 µA max at VDD = 18V, 25°C."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cd14538b",+ "pages": 22,+ "sha256": "e1f0669c091291a1",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}