component
CD01K032768ACNBAEAE
Public Made by Adomby adom
TKD Crystals, DT-26. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
CD01K032768ACNBAEAE
TKD · Crystals · DT-26
CD01K032768ACNBAEAE from TKD, in a DT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of a two-terminal crystal; either orientation. |
| 2 | 2 | passive | Terminal 2 of a two-terminal crystal; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TKD |
| Package | DT-26 |
| Category | Crystals, Oscillators, Resonators |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature range | Topt | -20 | 70 | ℃ | 3 | ||
| Storage temperature range | Tstg | -40 | 85 | ℃ | 3 | ||
| Frequency tolerance | dF/Fo | -10 | 10 | ppm | Refer to Center Frequency@25±3℃ | 3 | |
| Frequency stability over temperature | dF/F25 | -0.049 | -0.034 | -0.019 | ppm/℃ | Refer to Operating Temperature | 3 |
| Aging | dF/F25 | -5 | 5 | ppm | Per Year | 3 | |
| Frequency change after vibration | -5 | 5 | ppm | 10 to 55Hz, 1.5mm amplitude, X.Y.Z, 2h each direction | 5 | ||
| Frequency change after drop test | -5 | 5 | ppm | 3 free drops from 75cm onto hard wooden board | 5 | ||
| Frequency change after high temperature | -5 | 5 | ppm | 96 hours at 100℃±3℃ | 5 | ||
| Frequency change after low temperature | -5 | 5 | ppm | 48 hours at -40℃±3℃ | 5 | ||
| Frequency change after high temperature and humidity | -5 | 5 | ppm | 48 hours at 60℃±3℃, relative humidity 90-100% | 5 | ||
| Frequency change after temperature cycle | -5 | 5 | ppm | 100 temperature cycles | 5 | ||
| Frequency change after lead strength test | -5 | 5 | ppm | 1.00 Kg tensile force on lead, held more than 5 seconds | 5 | ||
| Resistance change after drop test | 5 | kohm | 3 free drops from 75cm onto hard wooden board | 5 | |||
| Resistance change after high temperature | 5 | kohm | 96 hours at 100℃±3℃ | 5 | |||
| Resistance change after low temperature | 5 | kohm | 48 hours at -40℃±3℃ | 5 | |||
| Resistance change after high temperature and humidity | 5 | kohm | 48 hours at 60℃±3℃, relative humidity 90-100% | 5 | |||
| Resistance change after temperature cycle | 5 | kohm | 100 temperature cycles | 5 | |||
| Resistance change after lead strength test | 5 | kohm | 1.00 Kg tensile force on lead, held more than 5 seconds | 5 | |||
| Insulation resistance | IR | 500 | MΩ | @DC 100 Volt | 3 | ||
| Shunt capacitance | C0 | 1.4 | 3 | pF | 3 | ||
| Equivalent series resistance | ESR | 40 | KΩ | @Series | 3 | ||
| Load capacitance | CL | 12.5 | pF | 3 | |||
| Drive level | DL | 0.1 | uW | 3 | |||
| Nominal frequency | 32.768 | KHz | 3 | ||||
| Recommended maximum drive level | 1 | μW | Less than 1.0μW recommended; more than 2.0μW not guaranteed | 7 | |||
| Reflow soldering maximum temperature | 230 | ℃ | Not recommended reflow; if used, maximum temperature | 4 |
CAD (KiCad official)
- Symbol:
CD01K032768ACNBAEAE - Footprint:
Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical - 3D model: DT-26 (KiCad packages3D, STEP)
- 3D model files:
cd01k032768acnbaeae-etched.step/cd01k032768acnbaeae-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cd01k032768acnbaeae.step/cd01k032768acnbaeae.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TKD datasheet (8 pp, sha256 ``, retrieved 2026-10-16, tier: lcsc)
- Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarycrystal numbering(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).