component
CC6937S8-5FB020
Public Made by Adomby adom
Cross chip Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CC6937S8-5FB020
Cross chip · Current Sensors · SOP-8
CC6937S8-5FB020 from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input pin, paired with pin 2 on the IP+ side; current flowing from IP+ to IP- is positive, and the internal primary conductor resistance is typically 0.5 mΩ. |
| 2 | IP+ | passive | Primary current input pin, paired with pin 1 on the IP+ side; current flowing from IP+ to IP- is positive, and the sensor should be connected in series with the measured circuit without shunt resistors across IP+ and IP-. |
| 3 | IP- | passive | Primary current return pin, paired with pin 4 on the IP- side; current flowing into IP- from IP+ is treated as the positive direction, and reverse current is negative. |
| 4 | IP- | passive | Primary current return pin, paired with pin 3 on the IP- side; the primary side is isolated from the secondary pins 5-8 with 3750 VRMS withstand voltage. |
| 5 | GND | power_in | Ground reference for the sensor's secondary circuit and the VOUT and VREF outputs. |
| 6 | VREF | power_in | Reference voltage pin that works as an output (2.500 V nominal in the 5 V series, recommended load about 2 mA) or as an input accepting 0 to 4 V, and it sets the VOUT quiescent level. |
| 7 | VOUT | output | Analog output whose quiescent level is VREF (2.5 V at 5 V supply) and which moves by IP × 100 mV/A for the CC6937S8-5FB020, with a 1.5 kΩ minimum load and 1 to 2.2 nF filter capacitor recommended. |
| 8 | VCC | power_in | Supply voltage pin; the 5 V series runs from 4.5 to 5.5 V and the absolute maximum rating is 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 5 | |
| Quiescent Current | ICC | 10 | 12 | 14 | mA | 5 | |
| VREF Output Voltage (5V nominal supply series) | VREF | 2.45 | 2.5 | 2.55 | V | 5V nominal supply voltage series | 5 |
| VREF Input Voltage range | VREFIN | 0 | 4 | V | VREF Input voltage range | 5 | |
| Current Accuracy Range | IP | -20 | 20 | A | 7 | ||
| Zero Current Differential Output Error | VOE | -5 | 5 | mV | TA=25°C, VOE=VOUT-VREF, IP=0A | 7 | |
| Zero Current Output Offset Drift | ΔVOE | -25 | 25 | mV | TA=-40°C ~125°C; VOE offset voltage drift = VOE_TA - VOE_25°C | 7 | |
| Zero Current Quiescent Output Voltage | VOUT(Q) | 2.492 | 2.5 | 2.508 | V | TA=25°C, IP=0A | 7 |
| Zero Current Quiescent Output Voltage Temperature Drift | ΔVOUT(Q) | -20 | 20 | mV | TA=-40°C ~125°C; VOUT(Q) voltage drift = VOUT(Q)_TA - VOUT(Q)_25°C | 7 | |
| Sensitivity Error | ΔSENS | -2.5 | 2.5 | % | TA=-40°C ~ 125°C | 7 | |
| Total Output Error | ETOT | -3 | 3 | % | TA=-40°C ~ 125°C, IP=IP_MAX | 7 | |
| Power Supply Voltage (absolute maximum) | VCC | 6.5 | V | 4 | |||
| Output Source Current | IOUT(SOURCE) | 25 | mA | 4 | |||
| Operating Ambient Temperature | TA | -40 | 125 | °C | 4 | ||
| Junction Temperature | TJ | 165 | °C | 4 | |||
| Storage Temperature | TS | -55 | 150 | °C | 4 | ||
| Electrostatic Discharge Voltage HBM | 4 | kV | HBM | 4 | |||
| Electrostatic Discharge Voltage CDM | 1 | kV | CDM | 4 | |||
| Latch Up | LU | 200 | mA | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | interference of external magnetic field. The typical resistance of the primary current input conductor at 25°C is 0.5mΩ. The lead frame is made of copper. The temperature | 28 |
CAD (KiCad official)
- Symbol:
CC6937S8-5FB020 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cc6937s8-5fb020-etched.step/cc6937s8-5fb020-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cc6937s8-5fb020.step/cc6937s8-5fb020.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cross chip datasheet (40 pp, sha256
7e94e7934f32e852, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CC6937S8-5FB020
**Cross chip** · Current Sensors · SOP-8
CC6937S8-5FB020 from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input pin, paired with pin 2 on the IP+ side; current flowing from IP+ to IP- is positive, and the internal primary conductor resistance is typically 0.5 mΩ. |
| 2 | IP+ | passive | Primary current input pin, paired with pin 1 on the IP+ side; current flowing from IP+ to IP- is positive, and the sensor should be connected in series with the measured circuit without shunt resistors across IP+ and IP-. |
| 3 | IP- | passive | Primary current return pin, paired with pin 4 on the IP- side; current flowing into IP- from IP+ is treated as the positive direction, and reverse current is negative. |
| 4 | IP- | passive | Primary current return pin, paired with pin 3 on the IP- side; the primary side is isolated from the secondary pins 5-8 with 3750 VRMS withstand voltage. |
| 5 | GND | power_in | Ground reference for the sensor's secondary circuit and the VOUT and VREF outputs. |
| 6 | VREF | power_in | Reference voltage pin that works as an output (2.500 V nominal in the 5 V series, recommended load about 2 mA) or as an input accepting 0 to 4 V, and it sets the VOUT quiescent level. |
| 7 | VOUT | output | Analog output whose quiescent level is VREF (2.5 V at 5 V supply) and which moves by IP × 100 mV/A for the CC6937S8-5FB020, with a 1.5 kΩ minimum load and 1 to 2.2 nF filter capacitor recommended. |
| 8 | VCC | power_in | Supply voltage pin; the 5 V series runs from 4.5 to 5.5 V and the absolute maximum rating is 6.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | | 5 |
| Quiescent Current | ICC | 10 | 12 | 14 | mA | | 5 |
| VREF Output Voltage (5V nominal supply series) | VREF | 2.45 | 2.5 | 2.55 | V | 5V nominal supply voltage series | 5 |
| VREF Input Voltage range | VREFIN | 0 | | 4 | V | VREF Input voltage range | 5 |
| Current Accuracy Range | IP | -20 | | 20 | A | | 7 |
| Zero Current Differential Output Error | VOE | -5 | | 5 | mV | TA=25°C, VOE=VOUT-VREF, IP=0A | 7 |
| Zero Current Output Offset Drift | ΔVOE | -25 | | 25 | mV | TA=-40°C ~125°C; VOE offset voltage drift = VOE_TA - VOE_25°C | 7 |
| Zero Current Quiescent Output Voltage | VOUT(Q) | 2.492 | 2.5 | 2.508 | V | TA=25°C, IP=0A | 7 |
| Zero Current Quiescent Output Voltage Temperature Drift | ΔVOUT(Q) | -20 | | 20 | mV | TA=-40°C ~125°C; VOUT(Q) voltage drift = VOUT(Q)_TA - VOUT(Q)_25°C | 7 |
| Sensitivity Error | ΔSENS | -2.5 | | 2.5 | % | TA=-40°C ~ 125°C | 7 |
| Total Output Error | ETOT | -3 | | 3 | % | TA=-40°C ~ 125°C, IP=IP_MAX | 7 |
| Power Supply Voltage (absolute maximum) | VCC | | | 6.5 | V | | 4 |
| Output Source Current | IOUT(SOURCE) | | | 25 | mA | | 4 |
| Operating Ambient Temperature | TA | -40 | | 125 | °C | | 4 |
| Junction Temperature | TJ | | | 165 | °C | | 4 |
| Storage Temperature | TS | -55 | | 150 | °C | | 4 |
| Electrostatic Discharge Voltage HBM | | | | 4 | kV | HBM | 4 |
| Electrostatic Discharge Voltage CDM | | | | 1 | kV | CDM | 4 |
| Latch Up | LU | | | 200 | mA | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | interference of external magnetic field. The typical resistance of the primary current input conductor at 25°C is 0.5mΩ. The lead frame is made of copper. The temperature | 28 |
## CAD (KiCad official)
- Symbol: `CC6937S8-5FB020`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `cc6937s8-5fb020-etched.step` / `cc6937s8-5fb020-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc6937s8-5fb020.step` / `cc6937s8-5fb020.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Cross chip datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8604439292496125952) (40 pp, sha256 `7e94e7934f32e852`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cc6937s8-5fb020-datasheet.pdf)