CC6920SO-30A

{
  "slug": "cc6920so-30a",
  "version": "0.1.0",
  "type": "component",
  "description": "Cross chip Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "magnetic sensors",
    "cc6920so-30a",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cc6920so-30a.kicad_sym",
    "cc6920so-30a.kicad_mod",
    "cc6920so-30a.glb",
    "cc6920so-30a.step",
    "cc6920so-30a.lbr",
    "docs/hero.png",
    "docs/cc6920so-30a-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cc6920so-30a-hero.glb",
    "cc6920so-30a-hero.overlay.json",
    "cc6920so-30a-etched.glb"
  ],
  "component": {
    "mpn": "CC6920SO-30A",
    "manufacturer": "Cross chip",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Magnetic Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8550761150691364864",
    "parts": {
      "symbol": "cc6920so-30a.kicad_sym",
      "footprint": "cc6920so-30a.kicad_mod",
      "model_3d": "cc6920so-30a-hero.glb",
      "model_3d_plain": "cc6920so-30a-etched.glb",
      "model_3d_step": "cc6920so-30a-etched.step",
      "model_3d_step_plain": "cc6920so-30a.step",
      "lbr": "cc6920so-30a.lbr"
    },
    "distributor_links": {
      "lcsc": "C2760491"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T07:09:41Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Primary current input; current flowing from IP+ to IP- is defined as positive, and the input voltage on IP+/IP- is limited to ±600 VPK relative to pin 5 (GND) under recommended operating conditions."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Primary current input (second IP+ pin, bonded in parallel with pin 1); current flowing from IP+ to IP- is defined as positive, and the input voltage is limited to ±600 VPK relative to pin 5 (GND)."
      },
      {
        "number": "3",
        "name": "IP-",
        "type": "passive",
        "description": "Primary current return; the device is meant to be connected in series in the circuit, and external resistors should not be shunted between IP+ and IP- except for very special reasons."
      },
      {
        "number": "4",
        "name": "IP-",
        "type": "passive",
        "description": "Primary current return (second IP- pin, bonded in parallel with pin 3); the device is meant to be connected in series in the circuit, and external shunt resistors between IP+ and IP- are not recommended."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; the IP+ and IP- input voltages are specified relative to this pin."
      },
      {
        "number": "6",
        "name": "VZCR",
        "type": "output",
        "description": "Zero current reference signal output with source current limited to 400 µA and sink current limited to 3000 µA; the datasheet advises keeping the output current below 0.4 mA and reserving 0.3 mA in design."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Analog voltage output that equals VCC/2 at zero current and changes by 67 mV/A for the 30A variant; the datasheet recommends a resistive load of at least 1.5 kΩ and a capacitive load of at most 1 nF."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Single power supply input, 4.5 V minimum to 5.5 V maximum (5 V typical), with supply current of 20 mA typical and 25 mA maximum with OUT floated."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SOP8 pinout is printed once for the whole CC6920SO family and is not variant-specific; the 30A o; Pin-number/name pairs were read from a two-column text table in the extracted datasheet. Confirm the; The datasheet's electrical characteristics no longer list VZCR (revision history rev2.5 deleted it),"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0645,
        "at": "2026-10-19T07:07:05"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8550761150691364864",
        "pages": 23,
        "sha256": "5fe4aa3fee763407",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cc6920so-30a.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cc6920so-30a-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "fb47fe8fc8f02e698a1a33840955c2c0367fa62894cb5c56ebff79657033db68",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}