component
CC6920BSO-40A
Public Made by Adomby adom
Cross chip Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CC6920BSO-40A
Cross chip · Current Sensors · SOP-8
CC6920BSO-40A from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Current sampled positive terminal of the internal copper primary conductor; pins 1 and 2 are internally common and the current flowing from IP+ to IP- is defined as positive, with the primary rated at 40 A continuous and 100 A peak for 3 s (absolute maximum). |
| 2 | IP+ | passive | Current sampled positive terminal of the internal copper primary conductor, internally common with pin 1; the isolation between pins 1-4 and 5-8 is 3500 VRMS. |
| 3 | IP- | passive | Current sampled negative terminal of the internal copper primary conductor, internally common with pin 4; current entering IP+ and leaving IP- is positive. |
| 4 | IP- | passive | Current sampled negative terminal of the internal copper primary conductor, internally common with pin 3; input voltage on the IP pins is specified up to ±600 VPK relative to GND (pin 5). |
| 5 | GND | power_in | Ground reference for the device; the primary input voltages on IP+ and IP- are referenced to this pin. |
| 6 | VZCR | output | Zero current reference signal output, internal benchmark 1.65 V typical at VCC = 3.3 V, with reference output source current limited to 400 µA max and sink current limited to 3000 µA max. |
| 7 | OUT | output | Analog voltage output with VOUT(Q) = VCC/2 at zero current; absolute maximum output source current is 6 mA and sink current 30 mA, with a recommended resistive load of at least 1.5 kΩ and capacitive load of at most 1 nF. |
| 8 | VCC | power_in | Single power supply input, recommended 3.0 V to 3.6 V (3.3 V typical), with an absolute maximum rating of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| Supply Current | ICC | 20 | 25 | mA | OUT pin floated | 4 | |
| Output Capacitance Load | CL | 1 | nF | 4 | |||
| Output Resistive Load | RL | 1.5 | kΩ | 4 | |||
| Res. of Primary Conductor | RP | 0.9 | 1.2 | mΩ | IP=2A | 4 | |
| Propagation Time | tD | 1 | 2 | μs | 4 | ||
| Rise Time | tr | 1 | 2.2 | μs | 4 | ||
| Common Mode Rejection Ratio | CMRR | 38 | dB | 4 | |||
| Bandwidth | BW | 250 | kHz | -3dB | 4 | ||
| Reference Output Source Current | IZCR(SOURCE) | 400 | μA | 4 | |||
| Reference Output Sink Current | IZCR(SINK) | 3000 | μA | 4 | |||
| Nonlinearity | LinERR | 0.1 | 0.5 | % | 4 | ||
| Symmetry | SymERR | 0.5 | 1.5 | % | 4 | ||
| Internal benchmark | VZCR | 1.65 | V | 4 | |||
| Zero Current Output Voltage | VOUT(Q) | 1.65 | V | IP=0 | 4 | ||
| Power-on Time | TPOR | 10 | μs | Output rising from 0 to 90% of steady-state | 4 | ||
| Current Accuracy Range (40A) | IP | -40 | 40 | A | 6 | ||
| Sensitivity (40A) | Sens | 32 | 33 | 34 | mV/A | full range of IP | 6 |
| Zero Current Differential Output Error (40A) | VOE | -7 | 7 | mV | 6 | ||
| Total Output Error (40A) | ETOT | -2 | 2 | % | 6 | ||
| Noise (40A) | VN(RMS) | 6 | mV | 6 | |||
| Zero Current Output Slope (40A) | ΔVOUT(Q) | 0.14 | mV/℃ | 6 | |||
| Sensitivity Slope (40A) | ΔSENS | 0.005 | mV/A/℃ | 6 | |||
| Input voltage | VIN+, VIN- | -600 | 600 | VPK | Voltage of IP+ and IP- relative to pin 5 (GND) | 4 | |
| Input current (DC / AC RMS) | IP | -50 | 50 | A | Decreases at higher ambient temperature | 4 | |
| Power Supply (recommended) | VCC | 3 | 3.6 | V | 4 | ||
| Operation Temperature | TA | -40 | 125 | °C | 4 | ||
| Power Supply | VCC | 7 | V | 3 | |||
| Output Voltage | VOUT | -0.3 | V | Maximum printed as VCC+0.3 | 3 | ||
| Output Source Current | IOUT(SOURCE) | 6 | mA | 3 | |||
| Output Sink Current | IOUT(SINK) | 30 | mA | 3 | |||
| Input current peak current | IPEAK | 100 | A | 3 s | 3 | ||
| Input current continuous current | ICON | 40 | A | 3 | |||
| Isolation Voltage | VISO | 3500 | VAC | 3 | |||
| Operating Ambient Temperature | Ta | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ | 165 | °C | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | 4000 | V | 3 | |||
| Withstand isolation voltage | VISO | 3500 | VRMS | Test method: 50 / 60Hz, 1min | 3 | ||
| Withstand isolation voltage (production test) | VTEST | 3900 | VRMS | t = 1s (100% production) | 3 | ||
| Working voltage of basic insulation | VWFSI | 600 | VPK | Basic insulation UL standard 62368-1:2014 | 3 | ||
| Working voltage of basic insulation | VWFSI | 424 | VRMS | Basic insulation UL standard 62368-1:2014 | 3 | ||
| Clearance | Dcl | 3.8 | mm | Minimum distance through air from IP leads to signal leads | 3 | ||
| Maximum repetitive peak isolation voltage | VIORM | 600 | VPK | AC voltage (bipolar) | 4 | ||
| Maximum working isolation voltage | VIOWM | 424 | VRMS | AC voltage (sine wave) | 4 | ||
| Maximum working isolation voltage | VIOWM | 600 | VDC | DC voltage | 4 | ||
| Maximum transient isolation voltage | VIOTM | 4949 | VPK | Test method: t = 60s (qualification) | 4 | ||
| Maximum transient isolation voltage | VIOTM | 5515 | VPK | VTEST t = 1s (100% production) | 4 | ||
| Maximum surge isolation voltage | VIOSM | 7000 | VPK | Tested 1.2us (rise) / 50us (width), one time | 4 | ||
| Surge Current | ISURGE | 7.5 | kA | Tested in compliance to IEC 61000-4-5, 8µs (rise) / 20µs (width) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | interference of external magnetic field. The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
CAD (KiCad official)
- Symbol:
CC6920BSO-40A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cc6920bso-40a-etched.step/cc6920bso-40a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cc6920bso-40a.step/cc6920bso-40a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cross chip datasheet (23 pp, sha256
bf0f27c31807521e, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CC6920BSO-40A
**Cross chip** · Current Sensors · SOP-8
CC6920BSO-40A from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Current sampled positive terminal of the internal copper primary conductor; pins 1 and 2 are internally common and the current flowing from IP+ to IP- is defined as positive, with the primary rated at 40 A continuous and 100 A peak for 3 s (absolute maximum). |
| 2 | IP+ | passive | Current sampled positive terminal of the internal copper primary conductor, internally common with pin 1; the isolation between pins 1-4 and 5-8 is 3500 VRMS. |
| 3 | IP- | passive | Current sampled negative terminal of the internal copper primary conductor, internally common with pin 4; current entering IP+ and leaving IP- is positive. |
| 4 | IP- | passive | Current sampled negative terminal of the internal copper primary conductor, internally common with pin 3; input voltage on the IP pins is specified up to ±600 VPK relative to GND (pin 5). |
| 5 | GND | power_in | Ground reference for the device; the primary input voltages on IP+ and IP- are referenced to this pin. |
| 6 | VZCR | output | Zero current reference signal output, internal benchmark 1.65 V typical at VCC = 3.3 V, with reference output source current limited to 400 µA max and sink current limited to 3000 µA max. |
| 7 | OUT | output | Analog voltage output with VOUT(Q) = VCC/2 at zero current; absolute maximum output source current is 6 mA and sink current 30 mA, with a recommended resistive load of at least 1.5 kΩ and capacitive load of at most 1 nF. |
| 8 | VCC | power_in | Single power supply input, recommended 3.0 V to 3.6 V (3.3 V typical), with an absolute maximum rating of 7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 3 | 3.3 | 3.6 | V | | 4 |
| Supply Current | ICC | | 20 | 25 | mA | OUT pin floated | 4 |
| Output Capacitance Load | CL | | | 1 | nF | | 4 |
| Output Resistive Load | RL | 1.5 | | | kΩ | | 4 |
| Res. of Primary Conductor | RP | | 0.9 | 1.2 | mΩ | IP=2A | 4 |
| Propagation Time | tD | | 1 | 2 | μs | | 4 |
| Rise Time | tr | | 1 | 2.2 | μs | | 4 |
| Common Mode Rejection Ratio | CMRR | 38 | | | dB | | 4 |
| Bandwidth | BW | 250 | | | kHz | -3dB | 4 |
| Reference Output Source Current | IZCR(SOURCE) | | | 400 | μA | | 4 |
| Reference Output Sink Current | IZCR(SINK) | | | 3000 | μA | | 4 |
| Nonlinearity | LinERR | | 0.1 | 0.5 | % | | 4 |
| Symmetry | SymERR | | 0.5 | 1.5 | % | | 4 |
| Internal benchmark | VZCR | | 1.65 | | V | | 4 |
| Zero Current Output Voltage | VOUT(Q) | | 1.65 | | V | IP=0 | 4 |
| Power-on Time | TPOR | | 10 | | μs | Output rising from 0 to 90% of steady-state | 4 |
| Current Accuracy Range (40A) | IP | -40 | | 40 | A | | 6 |
| Sensitivity (40A) | Sens | 32 | 33 | 34 | mV/A | full range of IP | 6 |
| Zero Current Differential Output Error (40A) | VOE | -7 | | 7 | mV | | 6 |
| Total Output Error (40A) | ETOT | -2 | | 2 | % | | 6 |
| Noise (40A) | VN(RMS) | | 6 | | mV | | 6 |
| Zero Current Output Slope (40A) | ΔVOUT(Q) | | 0.14 | | mV/℃ | | 6 |
| Sensitivity Slope (40A) | ΔSENS | | 0.005 | | mV/A/℃ | | 6 |
| Input voltage | VIN+, VIN- | -600 | | 600 | VPK | Voltage of IP+ and IP- relative to pin 5 (GND) | 4 |
| Input current (DC / AC RMS) | IP | -50 | | 50 | A | Decreases at higher ambient temperature | 4 |
| Power Supply (recommended) | VCC | 3 | | 3.6 | V | | 4 |
| Operation Temperature | TA | -40 | | 125 | °C | | 4 |
| Power Supply | VCC | | | 7 | V | | 3 |
| Output Voltage | VOUT | -0.3 | | | V | Maximum printed as VCC+0.3 | 3 |
| Output Source Current | IOUT(SOURCE) | | | 6 | mA | | 3 |
| Output Sink Current | IOUT(SINK) | | | 30 | mA | | 3 |
| Input current peak current | IPEAK | | | 100 | A | 3 s | 3 |
| Input current continuous current | ICON | | | 40 | A | | 3 |
| Isolation Voltage | VISO | | | 3500 | VAC | | 3 |
| Operating Ambient Temperature | Ta | -40 | | 125 | °C | | 3 |
| Junction Temperature | TJ | | | 165 | °C | | 3 |
| Storage Temperature | TS | -55 | | 150 | °C | | 3 |
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | | | 4000 | V | | 3 |
| Withstand isolation voltage | VISO | | | 3500 | VRMS | Test method: 50 / 60Hz, 1min | 3 |
| Withstand isolation voltage (production test) | VTEST | | | 3900 | VRMS | t = 1s (100% production) | 3 |
| Working voltage of basic insulation | VWFSI | | | 600 | VPK | Basic insulation UL standard 62368-1:2014 | 3 |
| Working voltage of basic insulation | VWFSI | | | 424 | VRMS | Basic insulation UL standard 62368-1:2014 | 3 |
| Clearance | Dcl | 3.8 | | | mm | Minimum distance through air from IP leads to signal leads | 3 |
| Maximum repetitive peak isolation voltage | VIORM | | | 600 | VPK | AC voltage (bipolar) | 4 |
| Maximum working isolation voltage | VIOWM | | | 424 | VRMS | AC voltage (sine wave) | 4 |
| Maximum working isolation voltage | VIOWM | | | 600 | VDC | DC voltage | 4 |
| Maximum transient isolation voltage | VIOTM | | | 4949 | VPK | Test method: t = 60s (qualification) | 4 |
| Maximum transient isolation voltage | VIOTM | | | 5515 | VPK | VTEST t = 1s (100% production) | 4 |
| Maximum surge isolation voltage | VIOSM | | | 7000 | VPK | Tested 1.2us (rise) / 50us (width), one time | 4 |
| Surge Current | ISURGE | | | 7.5 | kA | Tested in compliance to IEC 61000-4-5, 8µs (rise) / 20µs (width) | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | interference of external magnetic field. The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
## CAD (KiCad official)
- Symbol: `CC6920BSO-40A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `cc6920bso-40a-etched.step` / `cc6920bso-40a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc6920bso-40a.step` / `cc6920bso-40a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Cross chip datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8550761232337956864) (23 pp, sha256 `bf0f27c31807521e`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cc6920bso-40a-datasheet.pdf)