component
CC6920BSO-25A
Public Made by Adomby adom
Cross chip Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownCC6920BSO-25A
Cross chip · Current Sensors · SOP-8
CC6920BSO-25A from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current input (positive terminal, paired with pin 2); current flowing from IP+ to IP- is defined as positive, and the primary is isolated from the signal pins with 3500 VRMS withstand voltage. |
| 2 | IP+ | passive | Primary current input (positive terminal, paired with pin 1); current flowing from IP+ to IP- is defined as positive, and the primary is isolated from the signal pins with 3500 VRMS withstand voltage. |
| 3 | IP- | passive | Primary current input (negative terminal, paired with pin 4); the input current is measured as flowing from IP+ to IP-, and the primary is isolated from the signal pins with 3500 VRMS withstand voltage. |
| 4 | IP- | passive | Primary current input (negative terminal, paired with pin 3); the input current is measured as flowing from IP+ to IP-, and the primary is isolated from the signal pins with 3500 VRMS withstand voltage. |
| 5 | GND | power_in | Ground reference; the recommended input voltage range on IP+/IP- is specified relative to this pin, at -600 to 600 VPK. |
| 6 | VZCR | output | Zero Current Reference Signal Output, typically 1.65 V at VCC = 3.3 V, with reference output source current limited to 400 µA max and sink current to 3000 µA max. |
| 7 | OUT | output | Analog voltage output, VOUT = VCC/2 + sensitivity × IP, accurate over 0.33 to 2.97 V; absolute maximum output sink current is 30 mA and source current is 6 mA. |
| 8 | VCC | power_in | Single power supply input, 3.0 V to 3.6 V recommended (3.3 V typical), with an absolute maximum rating of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| Supply Current | ICC | 20 | 25 | mA | OUT pin floated | 4 | |
| Output Capacitance Load | CL | 1 | nF | 4 | |||
| Output Resistive Load | RL | 1.5 | kΩ | 4 | |||
| Res. of Primary Conductor | RP | 0.9 | 1.2 | mΩ | IP=2A | 4 | |
| Rise Time | tr | 1 | 2.2 | μs | 4 | ||
| Common Mode Rejection Ratio | CMRR | 38 | dB | 4 | |||
| Bandwidth | BW | 250 | kHz | -3dB | 4 | ||
| Reference Output Source Current | IZCR(SOURCE) | 400 | μA | 4 | |||
| Reference Output Sink Current | IZCR(SINK) | 3000 | μA | 4 | |||
| Nonlinearity | LinERR | 0.1 | 0.5 | % | 4 | ||
| Symmetry | SymERR | 0.5 | 1.5 | % | 4 | ||
| Power-on Time | TPOR | 10 | μs | Output rising from 0 to 90% of steady-state | 4 | ||
| Current Accuracy Range (25A) | IP | -25 | 25 | A | 6 | ||
| Sensitivity (25A) | Sens | 51 | 52.8 | 54 | mV/A | full range of IP | 6 |
| Zero Current Differential Output Error (25A) | VOE | -14 | 14 | mV | 6 | ||
| Total Output Error (25A) | ETOT | -2 | 2 | % | 6 | ||
| Input voltage | VIN+, VIN- | -600 | 600 | VPK | 4 | ||
| Input current (DC / AC RMS) | IP | -50 | 50 | A | 4 | ||
| Power Supply | VCC | 3 | 3.6 | V | 4 | ||
| Operation Temperature | TA | -40 | 125 | °C | 4 | ||
| Power Supply | VCC | 7 | V | 3 | |||
| Output Voltage | VOUT | -0.3 | V | 3 | |||
| Output Source Current | IOUT（SOURCE） | 6 | mA | 3 | |||
| Output Sink Current | IOUT（SINK） | 30 | mA | 3 | |||
| Input current peak current | IPEAK | 100 | A | 3 s | 3 | ||
| Input current continuous current | ICON | 40 | A | 3 | |||
| Isolation Voltage | VISO | 3500 | VAC | 3 | |||
| Operating Ambient Temperature | Ta | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ | 165 | °C | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | 4000 | V | 3 | |||
| Withstand isolation voltage | VISO | 3500 | VRMS | Test method: 50 / 60Hz, 1min | 3 | ||
| Withstand isolation voltage (production test) | VTEST | 3900 | VRMS | t = 1s (100% production) | 3 | ||
| Maximum repetitive peak isolation voltage | VIORM | 600 | VPK | AC voltage (bipolar) | 4 | ||
| Maximum transient isolation voltage (qualification) | VIOTM | 4949 | VPK | Test method: t = 60s (qualification) | 4 | ||
| Maximum transient isolation voltage (production test) | VIOTM | 5515 | VPK | VTEST t = 1s (100% production) | 4 | ||
| Maximum surge isolation voltage | VIOSM | 7000 | VPK | Tested 1.2us (rise) / 50us (width), one time | 4 | ||
| Surge Current | ISURGE | 7.5 | kA | Tested in compliance to IEC 61000-4-5 8µs (rise) / 20µs (width) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | interference of external magnetic field. The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
CAD (KiCad official)
- Symbol:
CC6920BSO-25A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cc6920bso-25a-etched.step/cc6920bso-25a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cc6920bso-25a.step/cc6920bso-25a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cross chip datasheet (23 pp, sha256
bf0f27c31807521e, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).