component
CC6900SO-20A
Public Made by Adomby adom
Cross chip Current Sensors, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 3d ago |
| viewers | 1mo ago |
| cc6900so-20a-etched.fit.json | 3d ago |
| cc6900so-20a-etched.glb | 3d ago |
| cc6900so-20a-etched.step | 3d ago |
| cc6900so-20a.glb | 1mo ago |
| cc6900so-20a.kicad_mod | 1mo ago |
| cc6900so-20a.kicad_sym | 1mo ago |
| cc6900so-20a.lbr | 1mo ago |
| cc6900so-20a.step | 1mo ago |
| package.json | 1mo ago |
| pads.json | 1mo ago |
| page.json | 11d ago |
| README.md | 18d ago |
CC6900SO-20A
Cross chip · Current Sensors · SOP-8
CC6900SO-20A from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current path positive terminal. Tie in parallel with pin 2 to carry the sampled current through the integrated low-impedance conductor. 100V isolation to signal pins. |
| 2 | IP+ | passive | Primary current path positive terminal (paralleled with pin 1). Part of the isolated current-carrying conductor. |
| 3 | IP- | passive | Primary current path negative/return terminal. Tie in parallel with pin 4. 100V isolation to signal pins. |
| 4 | IP- | passive | Primary current path negative/return terminal (paralleled with pin 3). |
| 5 | GND | power_in | Signal ground reference for the internal Hall front-end, chopper, and output amplifier. |
| 6 | NC | unconnected | No connection. Must be left floating per the datasheet (需悬空). |
| 7 | OUT | output | Analog signal output. Quiescent level = 0.5 x VCC (2.5V at VCC=5V); swings 0.5 V to 4.5 V linearly with sensed current at 100 mV/A for the -20A variant. Linearity ~0.4%. |
| 8 | VCC | power_in | Supply voltage input, nominally 5V. Powers the Hall front-end, chopper oscillator, temperature compensation, and output amplifier. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cross chip |
| Package | SOP-8 |
| Category | Sensor |
| Pins | 8 |
Ordering variants
CC6900SO-20ASO-5ACC6900SO-20ASO-10ACC6900SO-20ACC6900SO-20ASO-30A
CAD (KiCad official)
- Symbol:
CC6900SO-20A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cc6900so-20a-etched.step/cc6900so-20a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cc6900so-20a.step/cc6900so-20a.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
cc6900so-20a.step |
122 KB | You want the bare part, or you mark your own boards. |
cc6900so-20a-etched.step |
2.8 MB | You want the part with CC6900SO-20A already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 659 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cross chip datasheet (3 pp, sha256
e459878df789bbd5, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).