CC2595RGTR

{
  "schema_version": 1,
  "type": "component",
  "slug": "cc2595rgtr",
  "title": "CC2595RGTR",
  "brief": "Texas Instruments RF Amplifiers, WQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "radio frequency chip-antenna",
    "cc2595rgtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "CC2595RGTR",
    "manufacturer": "Texas Instruments",
    "package": "WQFN-16-EP(3x3)",
    "pin_count": 17,
    "category": "Radio Frequency Chip/Antenna",
    "subcategory": "RF Amplifiers",
    "datasheet": "https://www.ti.com/lit/ds/symlink/cc2595.pdf",
    "parts": {
      "symbol": "cc2595rgtr.kicad_sym",
      "footprint": "cc2595rgtr.kicad_mod",
      "model_3d": "cc2595rgtr-hero.glb",
      "model_3d_plain": "cc2595rgtr.glb",
      "model_3d_step": "cc2595rgtr-etched.step",
      "model_3d_step_plain": "cc2595rgtr.step",
      "lbr": "cc2595rgtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2654449",
      "digikey": "296-28029-2-ND",
      "mouser": "595-CC2595RGTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T07:32:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-28029-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-CC2595RGTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "2",
        "name": "RF_IN",
        "type": "input",
        "description": "Single-ended RF input; the absolute maximum RF input power on RF_IN is +10 dBm."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "5",
        "name": "AVDD_BIAS",
        "type": "power_in",
        "description": "Supply voltage for analog and logic; recommended operating supply is 2.0 V to 3.6 V (absolute maximum -0.3 V to 3.6 V)."
      },
      {
        "number": "6",
        "name": "RBIAS1",
        "type": "passive",
        "description": "Analog bias set resistor for PA stage 1."
      },
      {
        "number": "7",
        "name": "RBIAS2",
        "type": "passive",
        "description": "Analog bias set resistor for PA stage 2."
      },
      {
        "number": "8",
        "name": "PAEN",
        "type": "input",
        "description": "Chip enable: high turns the PA on; the high input level is printed as 1.3 VDD V and the low input level as 0.3 V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "10",
        "name": "RF_OUT",
        "type": "output",
        "description": "Single-ended RF output, pin 1 of 2 of the PA output."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "12",
        "name": "RF_OUT",
        "type": "output",
        "description": "Single-ended RF output, pin 2 of 2 of the PA output."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "15",
        "name": "AVDD_PA1",
        "type": "power_in",
        "description": "Supply voltage for PA stage 1, within the recommended 2.0 V to 3.6 V operating supply range."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "17",
        "name": "EXPOSED PAD",
        "type": "passive",
        "description": "Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Exposed thermal pad is numbered 17 only in the land pattern and stencil figures (pages 12-13) and is; Datasheet describes RF_IN, RF_OUT as 'RF in/out' in Table 1; RF_OUT was typed as output and RF_IN as; The control-pin high input level is printed as '1.3 VDD V' in the electrical characteristics table, "
        ],
        "pages_sent": 14,
        "cost_usd": 0.0561,
        "at": "2026-10-11T07:32:25"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/cc2595.pdf",
        "pages": 14,
        "sha256": "2058cf88e37959a1",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cc2595rgtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cc2595rgtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          3,
          0.785
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9c7eeee32c7d5e19baf58fece14e72f3c2398a664a01e4fec7a183eb98bc45ff",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WQFN-16-EP(3x3)",
      "Category": "Radio Frequency Chip/Antenna",
      "Pins": "17"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "cc2595rgtr"
  ],
  "discovery_pitch": "CC2595RGTR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cc2595rgtr.kicad_sym",
    "cc2595rgtr.kicad_mod",
    "cc2595rgtr.glb",
    "cc2595rgtr.step",
    "cc2595rgtr.lbr",
    "docs/hero.png",
    "docs/cc2595rgtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cc2595rgtr-hero.glb",
    "cc2595rgtr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}