# CC2595RGTR

**Texas Instruments** · RF Amplifiers · WQFN-16-EP(3x3)

CC2595RGTR from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection. |
| 2 | RF_IN | input | Single-ended RF input; the absolute maximum RF input power on RF_IN is +10 dBm. |
| 3 | GND | power_in | Ground connection. |
| 4 | GND | power_in | Ground connection. |
| 5 | AVDD_BIAS | power_in | Supply voltage for analog and logic; recommended operating supply is 2.0 V to 3.6 V (absolute maximum -0.3 V to 3.6 V). |
| 6 | RBIAS1 | passive | Analog bias set resistor for PA stage 1. |
| 7 | RBIAS2 | passive | Analog bias set resistor for PA stage 2. |
| 8 | PAEN | input | Chip enable: high turns the PA on; the high input level is printed as 1.3 VDD V and the low input level as 0.3 V. |
| 9 | GND | power_in | Ground connection. |
| 10 | RF_OUT | output | Single-ended RF output, pin 1 of 2 of the PA output. |
| 11 | GND | power_in | Ground connection. |
| 12 | RF_OUT | output | Single-ended RF output, pin 2 of 2 of the PA output. |
| 13 | GND | power_in | Ground connection. |
| 14 | GND | power_in | Ground connection. |
| 15 | AVDD_PA1 | power_in | Supply voltage for PA stage 1, within the recommended 2.0 V to 3.6 V operating supply range. |
| 16 | GND | power_in | Ground connection. |
| 17 | EXPOSED PAD | passive | Exposed thermal pad that must be soldered to the printed circuit board for thermal and mechanical performance. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16-EP(3x3) |
| Category | Radio Frequency Chip/Antenna |
| Pins | 17 |

## CAD (KiCad official)

- Symbol: `CC2595RGTR`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `cc2595rgtr-etched.step` / `cc2595rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc2595rgtr.step` / `cc2595rgtr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/cc2595.pdf) (14 pp, sha256 `2058cf88e37959a1`, retrieved 2026-10-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/cc2595rgtr-datasheet.pdf)