component
CC1310F128RHBR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+70@@ -0,0 +1,70 @@+# CC1310F128RHBR++**Texas Instruments** · Microcontrollers (MCU/MPU/SOC) · VQFN-32-EP(5x5)++CC1310F128RHBR from Texas Instruments, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RF_P | passive | Positive differential RF port; positive RF input signal to LNA during RX and positive RF output signal from PA during TX; maximum input RF level 10 dBm. |+| 2 | RF_N | passive | Negative differential RF port; negative RF input signal to LNA during RX and negative RF output signal from PA during TX; maximum input RF level 10 dBm. |+| 3 | RX_TX | passive | Optional external bias pin for the RF LNA. |+| 4 | X32K_Q1 | passive | 32-kHz crystal oscillator pin 1; supports 32.768-kHz watch crystal with CL = 6-12 pF and ESR ≤ 100 kΩ. |+| 5 | X32K_Q2 | passive | 32-kHz crystal oscillator pin 2; supports 32.768-kHz watch crystal with CL = 6-12 pF and ESR ≤ 100 kΩ. |+| 6 | DIO_0 | bidirectional | General-purpose digital I/O, Sensor Controller capable; VIH = 0.8×VDDS2, VIL = 0.2×VDDS2. |+| 7 | DIO_1 | bidirectional | General-purpose digital I/O, Sensor Controller capable; VIH = 0.8×VDDS2, VIL = 0.2×VDDS2. |+| 8 | DIO_2 | bidirectional | General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V). |+| 9 | DIO_3 | bidirectional | General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V). |+| 10 | DIO_4 | bidirectional | General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V). |+| 11 | VDDS2 | power_in | 1.8-V to 3.8-V GPIO supply for DIO_0-DIO_6 and JTAG pins; must be ≥ 1.9 V when VDDS ≥ 2.7 V. |+| 12 | DCOUPL | power_out | 1.27-V regulated digital-supply decoupling node; connect external bypass capacitor only; do not supply external circuitry from this pin. |+| 13 | JTAG_TMSC | bidirectional | JTAG/cJTAG TMSC bidirectional serial data pin with high-drive capability; used for IEEE 1149.7 cJTAG or IEEE 1149.1 JTAG debug interface. |+| 14 | JTAG_TCKC | input | JTAG/cJTAG TCKC clock input; noise-immunity precautions required per JTAG Interface chapter of the CC13x0 Technical Reference Manual. |+| 15 | DIO_5 | bidirectional | General-purpose digital I/O with high-drive capability; alternate function JTAG_TDO; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS = 3.0 V). |+| 16 | DIO_6 | bidirectional | General-purpose digital I/O with high-drive capability; alternate function JTAG_TDI; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS = 3.0 V). |+| 17 | DCDC_SW | power_out | Switching output node of the internal DC/DC converter; do not supply external circuitry from this pin. |+| 18 | VDDS_DCDC | power_in | 1.8-V to 3.8-V supply input to the internal DC/DC converter; must be connected to the same voltage as VDDS. |+| 19 | RESET_N | input | Active-low reset input; no internal pullup; minimum low pulse duration 1 µs. |+| 20 | DIO_7 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 21 | DIO_8 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 22 | DIO_9 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 23 | DIO_10 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 24 | DIO_11 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 25 | DIO_12 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 26 | DIO_13 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 27 | DIO_14 | bidirectional | General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins. |+| 28 | VDDS | power_in | 1.8-V to 3.8-V main chip supply; powers DIO_7-DIO_14 and RESET_N domain; rising slew rate ≤ 100 mV/µs, falling ≤ 20 mV/µs. |+| 29 | VDDR | power_in | 1.7-V to 1.95-V regulated digital core supply; connect to output of internal DC/DC converter; if DC/DC not used, supplied internally from main LDO; do not supply external circuitry. |+| 30 | X24M_N | passive | 24-MHz crystal oscillator pin 1; required frequency reference for the radio; supports CL = 5-9 pF and ESR ≤ 60 Ω (CL 6-9 pF). |+| 31 | X24M_P | passive | 24-MHz crystal oscillator pin 2; required frequency reference for the radio; supports CL = 5-9 pF and ESR ≤ 60 Ω (CL 6-9 pF). |+| 32 | VDDR_RF | power_in | 1.7-V to 1.95-V RF core supply; connect to output of internal DC/DC; if DC/DC not used, must be connected to VDDR; do not supply external circuitry. |+| 33 | EGP | power_in | Exposed ground pad; must be soldered to PCB ground plane for optimal thermal and mechanical performance; RθJC(bottom) = 1.9 °C/W. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-32-EP(5x5) |+| Category | Embedded Processors & Controllers |+| Pins | 33 |++## CAD (KiCad official)++- Symbol: `CC1310F128RHBR`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`+- 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `cc1310f128rhbr-etched.step` / `cc1310f128rhbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc1310f128rhbr.step` / `cc1310f128rhbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cc1310) (72 pp, sha256 `2303c92927169c1e`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cc1310f128rhbr-datasheet.pdf)
page.jsonadded+294@@ -0,0 +1,294 @@+{+ "slug": "cc1310f128rhbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), VQFN-32-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "cc1310f128rhbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "cc1310f128rhbr.kicad_sym",+ "cc1310f128rhbr.kicad_mod",+ "cc1310f128rhbr.glb",+ "cc1310f128rhbr.step",+ "cc1310f128rhbr.lbr",+ "docs/hero.png",+ "docs/cc1310f128rhbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "CC1310F128RHBR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-32-EP(5x5)",+ "pin_count": 33,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/cc1310",+ "parts": {+ "symbol": "cc1310f128rhbr.kicad_sym",+ "footprint": "cc1310f128rhbr.kicad_mod",+ "model_3d": "cc1310f128rhbr-etched.glb",+ "model_3d_plain": "cc1310f128rhbr.glb",+ "model_3d_step": "cc1310f128rhbr-etched.step",+ "model_3d_step_plain": "cc1310f128rhbr.step",+ "lbr": "cc1310f128rhbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C69860"+ },+ "pins": [+ {+ "number": "1",+ "name": "RF_P",+ "type": "passive",+ "description": "Positive differential RF port; positive RF input signal to LNA during RX and positive RF output signal from PA during TX; maximum input RF level 10 dBm."+ },+ {+ "number": "2",+ "name": "RF_N",+ "type": "passive",+ "description": "Negative differential RF port; negative RF input signal to LNA during RX and negative RF output signal from PA during TX; maximum input RF level 10 dBm."+ },+ {+ "number": "3",+ "name": "RX_TX",+ "type": "passive",+ "description": "Optional external bias pin for the RF LNA."+ },+ {+ "number": "4",+ "name": "X32K_Q1",+ "type": "passive",+ "description": "32-kHz crystal oscillator pin 1; supports 32.768-kHz watch crystal with CL = 6-12 pF and ESR ≤ 100 kΩ."+ },+ {+ "number": "5",+ "name": "X32K_Q2",+ "type": "passive",+ "description": "32-kHz crystal oscillator pin 2; supports 32.768-kHz watch crystal with CL = 6-12 pF and ESR ≤ 100 kΩ."+ },+ {+ "number": "6",+ "name": "DIO_0",+ "type": "bidirectional",+ "description": "General-purpose digital I/O, Sensor Controller capable; VIH = 0.8×VDDS2, VIL = 0.2×VDDS2."+ },+ {+ "number": "7",+ "name": "DIO_1",+ "type": "bidirectional",+ "description": "General-purpose digital I/O, Sensor Controller capable; VIH = 0.8×VDDS2, VIL = 0.2×VDDS2."+ },+ {+ "number": "8",+ "name": "DIO_2",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V)."+ },+ {+ "number": "9",+ "name": "DIO_3",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V)."+ },+ {+ "number": "10",+ "name": "DIO_4",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with high-drive capability, Sensor Controller capable; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS2 = 3.0 V)."+ },+ {+ "number": "11",+ "name": "VDDS2",+ "type": "power_in",+ "description": "1.8-V to 3.8-V GPIO supply for DIO_0-DIO_6 and JTAG pins; must be ≥ 1.9 V when VDDS ≥ 2.7 V."+ },+ {+ "number": "12",+ "name": "DCOUPL",+ "type": "power_out",+ "description": "1.27-V regulated digital-supply decoupling node; connect external bypass capacitor only; do not supply external circuitry from this pin."+ },+ {+ "number": "13",+ "name": "JTAG_TMSC",+ "type": "bidirectional",+ "description": "JTAG/cJTAG TMSC bidirectional serial data pin with high-drive capability; used for IEEE 1149.7 cJTAG or IEEE 1149.1 JTAG debug interface."+ },+ {+ "number": "14",+ "name": "JTAG_TCKC",+ "type": "input",+ "description": "JTAG/cJTAG TCKC clock input; noise-immunity precautions required per JTAG Interface chapter of the CC13x0 Technical Reference Manual."+ },+ {+ "number": "15",+ "name": "DIO_5",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with high-drive capability; alternate function JTAG_TDO; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS = 3.0 V)."+ },+ {+ "number": "16",+ "name": "DIO_6",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with high-drive capability; alternate function JTAG_TDI; VOH = 2.68 V and VOL = 0.33 V at 8-mA load (VDDS = 3.0 V)."+ },+ {+ "number": "17",+ "name": "DCDC_SW",+ "type": "power_out",+ "description": "Switching output node of the internal DC/DC converter; do not supply external circuitry from this pin."+ },+ {+ "number": "18",+ "name": "VDDS_DCDC",+ "type": "power_in",+ "description": "1.8-V to 3.8-V supply input to the internal DC/DC converter; must be connected to the same voltage as VDDS."+ },+ {+ "number": "19",+ "name": "RESET_N",+ "type": "input",+ "description": "Active-low reset input; no internal pullup; minimum low pulse duration 1 µs."+ },+ {+ "number": "20",+ "name": "DIO_7",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "21",+ "name": "DIO_8",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "22",+ "name": "DIO_9",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "23",+ "name": "DIO_10",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "24",+ "name": "DIO_11",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "25",+ "name": "DIO_12",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "26",+ "name": "DIO_13",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "27",+ "name": "DIO_14",+ "type": "bidirectional",+ "description": "General-purpose digital I/O with analog capability, Sensor Controller capable; one of up to eight ADC-capable GPIO pins."+ },+ {+ "number": "28",+ "name": "VDDS",+ "type": "power_in",+ "description": "1.8-V to 3.8-V main chip supply; powers DIO_7-DIO_14 and RESET_N domain; rising slew rate ≤ 100 mV/µs, falling ≤ 20 mV/µs."+ },+ {+ "number": "29",+ "name": "VDDR",+ "type": "power_in",+ "description": "1.7-V to 1.95-V regulated digital core supply; connect to output of internal DC/DC converter; if DC/DC not used, supplied internally from main LDO; do not supply external circuitry."+ },+ {+ "number": "30",+ "name": "X24M_N",+ "type": "passive",+ "description": "24-MHz crystal oscillator pin 1; required frequency reference for the radio; supports CL = 5-9 pF and ESR ≤ 60 Ω (CL 6-9 pF)."+ },+ {+ "number": "31",+ "name": "X24M_P",+ "type": "passive",+ "description": "24-MHz crystal oscillator pin 2; required frequency reference for the radio; supports CL = 5-9 pF and ESR ≤ 60 Ω (CL 6-9 pF)."+ },+ {+ "number": "32",+ "name": "VDDR_RF",+ "type": "power_in",+ "description": "1.7-V to 1.95-V RF core supply; connect to output of internal DC/DC; if DC/DC not used, must be connected to VDDR; do not supply external circuitry."+ },+ {+ "number": "33",+ "name": "EGP",+ "type": "power_in",+ "description": "Exposed ground pad; must be soldered to PCB ground plane for optimal thermal and mechanical performance; RθJC(bottom) = 1.9 °C/W."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Missing VSS pins: The RHB package signal description table does not explicitly list any VSS (ground); JTAG_TCKC classified as input based on typical JTAG clock direction, though datasheet simply states ",+ "exposed pad 33 added from the footprint"+ ],+ "pages_sent": 72,+ "cost_usd": 0.7325,+ "at": "2026-09-22T02:02:35"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/cc1310",+ "pages": 72,+ "sha256": "2303c92927169c1e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 33,+ "described": 33,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}