← Commit history

Initial commit: component/cc115lrgpr

Ray ·9fc411c61e ·
2 files changed +294
README.mdadded+57
@@ -0,0 +1,57 @@+# CC115LRGPR++**Texas Instruments** · RF Transceiver ICs · QFN-20-EP(4x4)++CC115LRGPR from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCLK | input | Serial configuration interface, clock input |+| 2 | SO (GDO1) | tri_state | Serial configuration interface, data output; optional general output pin when CSn is high; default is 3-state output |+| 3 | GDO2 | output | Digital output pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC |+| 4 | DVDD | power_in | 1.8 to 3.6 V digital power supply for digital I/Os and digital core voltage regulator |+| 5 | DCOUPL | power_out | 1.6 to 2.0 V digital power supply output for decoupling; intended for CC115L only, cannot supply other devices |+| 6 | GDO0 | bidirectional | Digital I/O pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC, or serial input TX data |+| 7 | CSn | input | Serial configuration interface, chip select |+| 8 | XOSC_Q1 | bidirectional | Crystal oscillator pin 1, or external clock input |+| 9 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |+| 10 | XOSC_Q2 | bidirectional | Crystal oscillator pin 2 |+| 11 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |+| 12 | RF_P | output | Positive RF output signal from PA in transmit mode |+| 13 | RF_N | output | Negative RF output signal from PA in transmit mode |+| 14 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |+| 15 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |+| 16 | GND | power_in | Analog ground connection |+| 17 | RBIAS | passive | External bias resistor for reference current |+| 18 | DGUARD | power_in | Power supply connection for digital noise isolation |+| 19 | GND | power_in | Ground connection for digital noise isolation |+| 20 | SI | input | Serial configuration interface, data input |+| 21 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-20-EP(4x4) |+| Category | RF And Wireless |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `CC115LRGPR`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm`+- 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `cc115lrgpr-etched.step` / `cc115lrgpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cc115lrgpr.step` / `cc115lrgpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cc115l) (75 pp, sha256 `2772bc2c5d29362e`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cc115lrgpr-datasheet.pdf)
page.jsonadded+237
@@ -0,0 +1,237 @@+{+  "slug": "cc115lrgpr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RF Transceiver ICs, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "rf and wireless",+    "cc115lrgpr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "cc115lrgpr.kicad_sym",+    "cc115lrgpr.kicad_mod",+    "cc115lrgpr.glb",+    "cc115lrgpr.step",+    "cc115lrgpr.lbr",+    "docs/hero.png",+    "docs/cc115lrgpr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "CC115LRGPR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-20-EP(4x4)",+    "pin_count": 21,+    "category": "RF And Wireless",+    "subcategory": "RF Transceiver ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/cc115l",+    "parts": {+      "symbol": "cc115lrgpr.kicad_sym",+      "footprint": "cc115lrgpr.kicad_mod",+      "model_3d": "cc115lrgpr-etched.glb",+      "model_3d_plain": "cc115lrgpr.glb",+      "model_3d_step": "cc115lrgpr-etched.step",+      "model_3d_step_plain": "cc115lrgpr.step",+      "lbr": "cc115lrgpr.lbr"+    },+    "distributor_links": {+      "lcsc": "C140280",+      "digikey": "296-35721-2-ND",+      "mouser": "595-CC115LRGPR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T05:51:52Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-35721-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-CC115LRGPR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SCLK",+        "type": "input",+        "description": "Serial configuration interface, clock input"+      },+      {+        "number": "2",+        "name": "SO (GDO1)",+        "type": "tri_state",+        "description": "Serial configuration interface, data output; optional general output pin when CSn is high; default is 3-state output"+      },+      {+        "number": "3",+        "name": "GDO2",+        "type": "output",+        "description": "Digital output pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC"+      },+      {+        "number": "4",+        "name": "DVDD",+        "type": "power_in",+        "description": "1.8 to 3.6 V digital power supply for digital I/Os and digital core voltage regulator"+      },+      {+        "number": "5",+        "name": "DCOUPL",+        "type": "power_out",+        "description": "1.6 to 2.0 V digital power supply output for decoupling; intended for CC115L only, cannot supply other devices"+      },+      {+        "number": "6",+        "name": "GDO0",+        "type": "bidirectional",+        "description": "Digital I/O pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC, or serial input TX data"+      },+      {+        "number": "7",+        "name": "CSn",+        "type": "input",+        "description": "Serial configuration interface, chip select"+      },+      {+        "number": "8",+        "name": "XOSC_Q1",+        "type": "bidirectional",+        "description": "Crystal oscillator pin 1, or external clock input"+      },+      {+        "number": "9",+        "name": "AVDD",+        "type": "power_in",+        "description": "1.8 to 3.6 V analog power supply connection"+      },+      {+        "number": "10",+        "name": "XOSC_Q2",+        "type": "bidirectional",+        "description": "Crystal oscillator pin 2"+      },+      {+        "number": "11",+        "name": "AVDD",+        "type": "power_in",+        "description": "1.8 to 3.6 V analog power supply connection"+      },+      {+        "number": "12",+        "name": "RF_P",+        "type": "output",+        "description": "Positive RF output signal from PA in transmit mode"+      },+      {+        "number": "13",+        "name": "RF_N",+        "type": "output",+        "description": "Negative RF output signal from PA in transmit mode"+      },+      {+        "number": "14",+        "name": "AVDD",+        "type": "power_in",+        "description": "1.8 to 3.6 V analog power supply connection"+      },+      {+        "number": "15",+        "name": "AVDD",+        "type": "power_in",+        "description": "1.8 to 3.6 V analog power supply connection"+      },+      {+        "number": "16",+        "name": "GND",+        "type": "power_in",+        "description": "Analog ground connection"+      },+      {+        "number": "17",+        "name": "RBIAS",+        "type": "passive",+        "description": "External bias resistor for reference current"+      },+      {+        "number": "18",+        "name": "DGUARD",+        "type": "power_in",+        "description": "Power supply connection for digital noise isolation"+      },+      {+        "number": "19",+        "name": "GND",+        "type": "power_in",+        "description": "Ground connection for digital noise isolation"+      },+      {+        "number": "20",+        "name": "SI",+        "type": "input",+        "description": "Serial configuration interface, data input"+      },+      {+        "number": "21",+        "name": "GND",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 21 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 23,+        "cost_usd": 0.1956,+        "at": "2026-10-01T05:51:38"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/cc115l",+        "pages": 75,+        "sha256": "2772bc2c5d29362e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file