component
CC115LRGPR
Public Made by Adomby adom
Texas Instruments RF Transceiver ICs, QFN-20-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCC115LRGPR
Texas Instruments · RF Transceiver ICs · QFN-20-EP(4x4)
CC115LRGPR from Texas Instruments, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial configuration interface, clock input |
| 2 | SO (GDO1) | tri_state | Serial configuration interface, data output; optional general output pin when CSn is high; default is 3-state output |
| 3 | GDO2 | output | Digital output pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC |
| 4 | DVDD | power_in | 1.8 to 3.6 V digital power supply for digital I/Os and digital core voltage regulator |
| 5 | DCOUPL | power_out | 1.6 to 2.0 V digital power supply output for decoupling; intended for CC115L only, cannot supply other devices |
| 6 | GDO0 | bidirectional | Digital I/O pin for general use: test signals, TX FIFO status signals, clock output down-divided from XOSC, or serial input TX data |
| 7 | CSn | input | Serial configuration interface, chip select |
| 8 | XOSC_Q1 | bidirectional | Crystal oscillator pin 1, or external clock input |
| 9 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |
| 10 | XOSC_Q2 | bidirectional | Crystal oscillator pin 2 |
| 11 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |
| 12 | RF_P | output | Positive RF output signal from PA in transmit mode |
| 13 | RF_N | output | Negative RF output signal from PA in transmit mode |
| 14 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |
| 15 | AVDD | power_in | 1.8 to 3.6 V analog power supply connection |
| 16 | GND | power_in | Analog ground connection |
| 17 | RBIAS | passive | External bias resistor for reference current |
| 18 | DGUARD | power_in | Power supply connection for digital noise isolation |
| 19 | GND | power_in | Ground connection for digital noise isolation |
| 20 | SI | input | Serial configuration interface, data input |
| 21 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | QFN-20-EP(4x4) |
| Category | RF And Wireless |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
CC115LRGPR - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
cc115lrgpr-etched.step/cc115lrgpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cc115lrgpr.step/cc115lrgpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (75 pp, sha256
2772bc2c5d29362e, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).