component
CBM8336AS8
Public Made by Adomby adom
Corebai Microelectronics Precision OpAmps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCBM8336AS8
Corebai Microelectronics · Precision OpAmps · SOP-8
CBM8336AS8 from Corebai Microelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of amplifier A, which swings rail to rail between VSS and VDD. |
| 2 | INA- | input | Inverting input of amplifier A; analog input voltage must stay within VSS-0.5V to VDD+0.5V. |
| 3 | INA+ | input | Non-inverting input of amplifier A; analog input voltage must stay within VSS-0.5V to VDD+0.5V. |
| 4 | VSS | power_in | Negative power supply terminal (ground in single-supply operation); the supply range is 1.8V to 5.5V single supply. |
| 5 | INB+ | input | Non-inverting input of amplifier B; analog input voltage must stay within VSS-0.5V to VDD+0.5V. |
| 6 | INB- | input | Inverting input of amplifier B; analog input voltage must stay within VSS-0.5V to VDD+0.5V. |
| 7 | OUTB | output | Output of amplifier B, which swings rail to rail between VSS and VDD. |
| 8 | VDD | power_in | Positive power supply terminal; VDD to VSS absolute maximum is 7.5V and the recommended supply is 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Corebai Microelectronics |
| Package | SOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | 2 | 10 | μV | 7 | ||
| Supply voltage (VDD to VSS) | VDD to VSS | -0.5 | 7.5 | V | 6 | ||
| Operating temperature range | -45 | 125 | ℃ | 6 | |||
| Junction temperature | 160 | ℃ | 6 | ||||
| Storage temperature | -55 | 150 | ℃ | 6 | |||
| Pin temperature (soldering, 10 s) | 260 | ℃ | Soldering time 10 s | 6 | |||
| Input bias current | IB | 20 | pA | 7 | |||
| Input offset current | IOS | 10 | pA | 7 | |||
| Common-mode rejection ratio | CMRR | 110 | dB | VCM = 0V to 5V | 7 | ||
| Large-signal voltage gain | AVO | 145 | dB | RL = 10kΩ, VO = 0.3V to 4.7V | 7 | ||
| Input offset voltage drift | ΔVOS/ΔT | 50 | nV/℃ | 7 | |||
| High output voltage | VOH | 4.998 | V | RL = 100kΩ to -VS | 7 | ||
| High output voltage | VOH | 4.994 | V | RL = 10kΩ to -VS | 7 | ||
| Low output voltage | VOL | 5 | mV | RL = 100kΩ to +VS | 7 | ||
| Low output voltage | VOL | 20 | mV | RL = 10kΩ to +VS | 7 | ||
| Short-circuit current | ISC | 20 | mA | RL = 10Ω to -VS | 7 | ||
| Output current | IO | 30 | mA | 7 | |||
| Power supply rejection ratio | PSRR | 115 | dB | VS = 2.5V to 5.5V | 7 | ||
| Quiescent current | IQ | 25 | μA | VO = 0V, RL = 0Ω | 7 | ||
| Gain bandwidth product | GBP | 350 | MHz | G = +100 | 7 | ||
| Slew rate | SR | 0.2 | V/μs | RL = 10kΩ | 7 | ||
| Voltage noise peak-to-peak | en p-p | 1.1 | μVp-p | 0Hz to 10Hz | 7 | ||
| Voltage noise density | en | 70 | nV/√Hz | f = 1kHz | 7 | ||
| Thermal resistance, junction to ambient (SOP-8) | θJA | 125 | ℃/W | SOP-8 package outer surface, ambient +25℃ | 6 |
CAD (KiCad official)
- Symbol:
CBM8336AS8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cbm8336as8-etched.step/cbm8336as8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cbm8336as8.step/cbm8336as8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Corebai Microelectronics datasheet (21 pp, sha256
8270c75fe3adda64, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).