component
CBM1307AS8
Public Made by Adomby adom
Corebai Microelectronics Real Time Clocks, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CBM1307AS8
Corebai Microelectronics · Real Time Clocks · SOIC-8
CBM1307AS8 from Corebai Microelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Pin for connection of the quartz resonator (32.768 kHz crystal oscillator input); the datasheet gives no frequency or load limits for it. |
| 2 | X2 | input | Pin for connection of the quartz resonator, the second terminal of the crystal oscillator; the datasheet gives no frequency or load limits for it. |
| 3 | VBAT | power_in | Battery supply pin for backup mode, recommended operating range 2.0 V to 3.5 V with an absolute maximum of 7.0 V. |
| 4 | GND | power_in | Ground pin for the device. |
| 5 | SDA | bidirectional | Input/output of serial data for the two-wire bus; input thresholds are VIL max 0.8 V and VIH min 2.2 V, with an absolute maximum of 7.0 V. |
| 6 | SCL | input | Input of the consecutive cycle (serial clock) signal for the two-wire bus; input thresholds are VIL max 0.8 V and VIH min 2.2 V, with an absolute maximum of 7.0 V. |
| 7 | SQW/OUT | output | Output of the programmable rectangular (square-wave) signal; the datasheet gives no voltage or current limits for this pin. |
| 8 | VCC | power_in | Main power supply pin, recommended operating range 4.5 V to 5.5 V with an absolute maximum of 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Corebai Microelectronics |
| Package | SOIC-8 |
| Category | Clock/Timing |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input leakage current (SCL only) | ILI | 1 | uA | 3 | |||
| In / Out leakage current (SDA and SQW/OUT) | ILO | 1 | uA | 3 | |||
| Low level output voltage | VOL | 0.4 | V | VCC = 4.5 V | 3 | ||
| Consumption current in the data transfer mode | ICCA | 1500 | uA | fSCL = 100 kHz | 3 | ||
| Consumption current in the static mode | ICCS | 200 | uA | VCC = 5 V and SDA, SCL = 5 V | 3 | ||
| Consumption current in the battery mode (SQW/OUT OFF, 32 kHz ON) | IBAT1 | 0.5 | uA | VCC = 0 V, VBAT = 3 V | 3 | ||
| Consumption current in the battery mode (SQW/OUT ON, 32 kHz ON) | IBAT2 | 0.8 | uA | VCC = 0 V, VBAT = 3 V | 3 | ||
| Cycle frequency SCL | fSCL | 0 | 100 | kHz | 3 | ||
| Time of the bus vacant status between STOP and START | tBUF | 4.7 | us | 3 | |||
| Hold time (repeated) of START status | tHD:STA | 4 | us | 3 | |||
| Duration of the low status of the cycle pulse SCL | tLOW | 4.7 | us | 3 | |||
| Duration of the cycle pulse high status SCL | tHIGH | 4 | us | 3 | |||
| Pre-set time for the repeated status START | tSU:STA | 4.7 | us | 3 | |||
| Data hold time | tHD:DAT | 0 | us | 3 | |||
| Data pre-set time | tSU:DAT | 250 | ns | 3 | |||
| Rise time of signals SDA and SCL | tR | 1000 | ns | 3 | |||
| Drop time of signals SDA and SCL | tF | 300 | ns | 3 | |||
| Pre-set time for the status STOP | tSU:STO | 4.7 | ns | 3 | |||
| Total capacitance load per each bus line | CB | 400 | pF | 3 | |||
| IN / OUT capacitance | CI/O | 10 | 10 | pF | 3 | ||
| Load capacitance of the quartz resonator | CLX | 12.5 | 12.5 | pF | 4 | ||
| Supply voltage VCC | VCC | 4.5 | 5.5 | V | 2 | ||
| Supply voltage VCC | VCC | -0.5 | 7 | V | 2 | ||
| Battery voltage | VBAT | 2 | 3.5 | V | 2 | ||
| Battery voltage | VBAT | -0.5 | 7 | V | 2 | ||
| Low level input voltage | VIL | -0.3 | 0.8 | V | 2 | ||
| Low level input voltage | VIL | -0.5 | 7 | V | 2 | ||
| High level input voltage | VIH | 2.2 | V | 2 | |||
| High level input voltage | VIH | -0.5 | 7 | V | 2 | ||
| Storage temperature | TS | -55 | 125 | ℃ | 2 | ||
| Operating temperature range | TA | -40 | 85 | ℃ | 2 |
CAD (KiCad official)
- Symbol:
CBM1307AS8 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
cbm1307as8-etched.step/cbm1307as8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cbm1307as8.step/cbm1307as8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Corebai Microelectronics datasheet (38 pp, sha256
81bc4fed5657900a, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CBM1307AS8
**Corebai Microelectronics** · Real Time Clocks · SOIC-8
CBM1307AS8 from Corebai Microelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Pin for connection of the quartz resonator (32.768 kHz crystal oscillator input); the datasheet gives no frequency or load limits for it. |
| 2 | X2 | input | Pin for connection of the quartz resonator, the second terminal of the crystal oscillator; the datasheet gives no frequency or load limits for it. |
| 3 | VBAT | power_in | Battery supply pin for backup mode, recommended operating range 2.0 V to 3.5 V with an absolute maximum of 7.0 V. |
| 4 | GND | power_in | Ground pin for the device. |
| 5 | SDA | bidirectional | Input/output of serial data for the two-wire bus; input thresholds are VIL max 0.8 V and VIH min 2.2 V, with an absolute maximum of 7.0 V. |
| 6 | SCL | input | Input of the consecutive cycle (serial clock) signal for the two-wire bus; input thresholds are VIL max 0.8 V and VIH min 2.2 V, with an absolute maximum of 7.0 V. |
| 7 | SQW/OUT | output | Output of the programmable rectangular (square-wave) signal; the datasheet gives no voltage or current limits for this pin. |
| 8 | VCC | power_in | Main power supply pin, recommended operating range 4.5 V to 5.5 V with an absolute maximum of 7.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Corebai Microelectronics |
| Package | SOIC-8 |
| Category | Clock/Timing |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input leakage current (SCL only) | ILI | | | 1 | uA | | 3 |
| In / Out leakage current (SDA and SQW/OUT) | ILO | | | 1 | uA | | 3 |
| Low level output voltage | VOL | | | 0.4 | V | VCC = 4.5 V | 3 |
| Consumption current in the data transfer mode | ICCA | | | 1500 | uA | fSCL = 100 kHz | 3 |
| Consumption current in the static mode | ICCS | | | 200 | uA | VCC = 5 V and SDA, SCL = 5 V | 3 |
| Consumption current in the battery mode (SQW/OUT OFF, 32 kHz ON) | IBAT1 | | | 0.5 | uA | VCC = 0 V, VBAT = 3 V | 3 |
| Consumption current in the battery mode (SQW/OUT ON, 32 kHz ON) | IBAT2 | | | 0.8 | uA | VCC = 0 V, VBAT = 3 V | 3 |
| Cycle frequency SCL | fSCL | 0 | | 100 | kHz | | 3 |
| Time of the bus vacant status between STOP and START | tBUF | 4.7 | | | us | | 3 |
| Hold time (repeated) of START status | tHD:STA | 4 | | | us | | 3 |
| Duration of the low status of the cycle pulse SCL | tLOW | 4.7 | | | us | | 3 |
| Duration of the cycle pulse high status SCL | tHIGH | 4 | | | us | | 3 |
| Pre-set time for the repeated status START | tSU:STA | 4.7 | | | us | | 3 |
| Data hold time | tHD:DAT | 0 | | | us | | 3 |
| Data pre-set time | tSU:DAT | 250 | | | ns | | 3 |
| Rise time of signals SDA and SCL | tR | | | 1000 | ns | | 3 |
| Drop time of signals SDA and SCL | tF | | | 300 | ns | | 3 |
| Pre-set time for the status STOP | tSU:STO | 4.7 | | | ns | | 3 |
| Total capacitance load per each bus line | CB | | | 400 | pF | | 3 |
| IN / OUT capacitance | CI/O | 10 | | 10 | pF | | 3 |
| Load capacitance of the quartz resonator | CLX | 12.5 | | 12.5 | pF | | 4 |
| Supply voltage VCC | VCC | 4.5 | | 5.5 | V | | 2 |
| Supply voltage VCC | VCC | -0.5 | | 7 | V | | 2 |
| Battery voltage | VBAT | 2 | | 3.5 | V | | 2 |
| Battery voltage | VBAT | -0.5 | | 7 | V | | 2 |
| Low level input voltage | VIL | -0.3 | | 0.8 | V | | 2 |
| Low level input voltage | VIL | -0.5 | | 7 | V | | 2 |
| High level input voltage | VIH | 2.2 | | | V | | 2 |
| High level input voltage | VIH | -0.5 | | 7 | V | | 2 |
| Storage temperature | TS | -55 | | 125 | ℃ | | 2 |
| Operating temperature range | TA | -40 | | 85 | ℃ | | 2 |
## CAD (KiCad official)
- Symbol: `CBM1307AS8`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `cbm1307as8-etched.step` / `cbm1307as8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cbm1307as8.step` / `cbm1307as8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Corebai Microelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884810885943296) (38 pp, sha256 `81bc4fed5657900a`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cbm1307as8-datasheet.pdf)