component
CAP300DG-TL
Public Made by Adomby adom
POWER INTEGRATIONS AC-DC Controllers And Regulators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CAP300DG-TL
POWER INTEGRATIONS · AC-DC Controllers And Regulators · SO-8
CAP300DG-TL from POWER INTEGRATIONS, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 1-4 together on the PCB. |
| 2 | D1 | passive | Terminal D1 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 1-4 should be coupled on the PCB. |
| 3 | D1 | passive | Terminal D1 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 1-4 should be coupled on the PCB. |
| 4 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 1-4 together on the PCB. |
| 5 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 5-8 together on the PCB. |
| 6 | D2 | passive | Terminal D2 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 5-8 should be coupled on the PCB. |
| 7 | D2 | passive | Terminal D2 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 5-8 should be coupled on the PCB. |
| 8 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 5-8 together on the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | POWER INTEGRATIONS |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| AC Removal Detection Time | tDETECT | 22 | 31.4 | ms | Line cycle frequency 47-63 Hz | 4 | |
| Drain Saturation Current | IDSAT | 6.3 | mA | CAP300DG | 4 | ||
| Supply Current | ISUPPLY | 21.7 | mA | TA = 25 °C | 4 | ||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Operating Ambient Temperature | TA | -20 | 105 | °C | 4 | ||
| Maximum Junction Temperature | TJ | -20 | 110 | °C | 4 | ||
| Thermal Resistance Junction-to-Case (Top), D Package | θJC | 75 | °C/W | Top | 4 | ||
| Total Series Resistance (R1 + R2) | 54 | kW | External resistors; total must be equal to or greater than 54 kW | 3 |
CAD (KiCad official)
- Symbol:
CAP300DG-TL - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
cap300dg-tl-etched.step/cap300dg-tl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cap300dg-tl.step/cap300dg-tl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: POWER INTEGRATIONS datasheet (8 pp, sha256
a54b597caa5a0101, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CAP300DG-TL
**POWER INTEGRATIONS** · AC-DC Controllers And Regulators · SO-8
CAP300DG-TL from POWER INTEGRATIONS, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 1-4 together on the PCB. |
| 2 | D1 | passive | Terminal D1 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 1-4 should be coupled on the PCB. |
| 3 | D1 | passive | Terminal D1 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 1-4 should be coupled on the PCB. |
| 4 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 1-4 together on the PCB. |
| 5 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 5-8 together on the PCB. |
| 6 | D2 | passive | Terminal D2 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 5-8 should be coupled on the PCB. |
| 7 | D2 | passive | Terminal D2 of the two-terminal X capacitor discharge device; the D1-to-D2 voltage must not exceed 1000 V in either polarity (absolute maximum), and pins 5-8 should be coupled on the PCB. |
| 8 | NC | unconnected | Not connected per Figure 4; the datasheet says electrical connections are made only to pins 2, 3, 6 and 7, and recommends coupling pins 5-8 together on the PCB. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | POWER INTEGRATIONS |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| AC Removal Detection Time | tDETECT | 22 | | 31.4 | ms | Line cycle frequency 47-63 Hz | 4 |
| Drain Saturation Current | IDSAT | | 6.3 | | mA | CAP300DG | 4 |
| Supply Current | ISUPPLY | | 21.7 | | mA | TA = 25 °C | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Operating Ambient Temperature | TA | -20 | | 105 | °C | | 4 |
| Maximum Junction Temperature | TJ | -20 | | 110 | °C | | 4 |
| Thermal Resistance Junction-to-Case (Top), D Package | θJC | | | 75 | °C/W | Top | 4 |
| Total Series Resistance (R1 + R2) | | 54 | | | kW | External resistors; total must be equal to or greater than 54 kW | 3 |
## CAD (KiCad official)
- Symbol: `CAP300DG-TL`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `cap300dg-tl-etched.step` / `cap300dg-tl-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cap300dg-tl.step` / `cap300dg-tl.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [POWER INTEGRATIONS datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590001864927174657) (8 pp, sha256 `a54b597caa5a0101`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cap300dg-tl-datasheet.pdf)