component
CA3140AMZ96
Public Made by Adomby adom
RENESAS Operational Amplifier, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -32,19 +32,19 @@ "number": "1", "name": "OFFSET_NULL", "type": "passive",- "description": "Offset-null terminal. Connect a 10k\u03a9 potentiometer between pins 1 and 5 with the wiper returned to pin 4 (V-) to trim the input offset voltage to zero. May also be used with pin 8 for supplementary Miller-effect compensation (extra roll-off)."+ "description": "Offset-null terminal. Connect a 10kΩ potentiometer between pins 1 and 5 with the wiper returned to pin 4 (V-) to trim the input offset voltage to zero. May also be used with pin 8 for supplementary Miller-effect compensation (extra roll-off)." }, { "number": "2", "name": "INV_INPUT", "type": "input",- "description": "Inverting input (\u2212) of the op-amp. High-impedance PMOS-FET gate, ZIN\u22481.5T\u03a9, input current \u224810pA at \u00b115V. Do not exceed \u00b18V differential input voltage; use a series limiting resistor if input can be driven below V-."+ "description": "Inverting input (−) of the op-amp. High-impedance PMOS-FET gate, ZIN≈1.5TΩ, input current ≈10pA at ±15V. Do not exceed ±8V differential input voltage; use a series limiting resistor if input can be driven below V-." }, { "number": "3", "name": "NON_INV_INPUT", "type": "input",- "description": "Non-inverting input (+) of the op-amp. High-impedance PMOS-FET gate; common-mode input range extends from about 0.5V below V- up to (V+ \u2212 2V). Same absolute-max input-current limit of 1mA applies."+ "description": "Non-inverting input (+) of the op-amp. High-impedance PMOS-FET gate; common-mode input range extends from about 0.5V below V- up to (V+ − 2V). Same absolute-max input-current limit of 1mA applies." }, { "number": "4",@@ -56,25 +56,25 @@ "number": "5", "name": "OFFSET_NULL", "type": "passive",- "description": "Second offset-null terminal. Paired with pin 1 via a 10k\u03a9 trim-pot whose wiper returns to pin 4 (V-) to null the input offset voltage."+ "description": "Second offset-null terminal. Paired with pin 1 via a 10kΩ trim-pot whose wiper returns to pin 4 (V-) to null the input offset voltage." }, { "number": "6", "name": "OUTPUT", "type": "output",- "description": "Op-amp output. Class-AB bipolar stage; VOM+ typ +13V, VOM- typ \u221214.4V at RL=2k\u03a9 and \u00b115V supply. Short-circuit protected to either supply rail; source \u224840mA, sink \u224818mA."+ "description": "Op-amp output. Class-AB bipolar stage; VOM+ typ +13V, VOM- typ −14.4V at RL=2kΩ and ±15V supply. Short-circuit protected to either supply rail; source ≈40mA, sink ≈18mA." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive supply rail. Operates from 4V (single supply) to \u00b118V (dual supply); absolute-max V+ to V- is 36V. Typical total supply current I+ \u2248 4mA."+ "description": "Positive supply rail. Operates from 4V (single supply) to ±18V (dual supply); absolute-max V+ to V- is 36V. Typical total supply current I+ ≈ 4mA." }, { "number": "8", "name": "STROBE", "type": "input",- "description": "Strobe / output-disable terminal. When tied to V- (pin 4) by mechanical or electrical means, the output at pin 6 swings low to approximately V- potential (sinks ~220\u00b5A from pin 8 to pin 4). Can also be used with pin 1 for external Miller-effect roll-off compensation."+ "description": "Strobe / output-disable terminal. When tied to V- (pin 4) by mechanical or electrical means, the output at pin 6 swings low to approximately V- potential (sinks ~220µA from pin 8 to pin 4). Can also be used with pin 1 for external Miller-effect roll-off compensation." } ], "provenance": {@@ -138,5 +138,8 @@ "docs/ca3140amz96-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }