component
CA-IF4805HS
Public Made by Adomby adom
Chipanalog RS-485 / RS-422 ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCA-IF4805HS
Chipanalog · RS-485 / RS-422 ICs · SOIC-8
CA-IF4805HS from Chipanalog, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: goes high when VID = VA − VB exceeds VTH+ and low when VID falls below VTH−, and is high-impedance when REB is high or open. |
| 2 | REB | input | Receiver enable, active low: the receiver is enabled when REB is low and its output is high-impedance when REB is high or open. |
| 3 | DE | input | Driver enable, active high: the driver outputs follow DI when DE is high and are high-impedance when DE is low; an internal pull-down disables the driver when DE is open. |
| 4 | DI | input | Driver data input: drives Y high and Z low when high (and the reverse when low), with an internal pull-up to VCC so the driver outputs A high and B low if left open while enabled. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Bus port A, driver/receiver non-inverting output/input; tolerates bus common-mode range of ±15 V and fault voltage of ±30 V, with ±30 kV HBM ESD on this half-duplex (HS) part. |
| 7 | B | bidirectional | Bus port B, driver/receiver inverting output/input; tolerates bus common-mode range of ±15 V and fault voltage of ±30 V, with ±30 kV HBM ESD on this half-duplex (HS) part. |
| 8 | VCC | power_in | Power supply; the recommended supply range is 3 V to 5.5 V and the absolute maximum is 7.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Chipanalog |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
CA-IF4805HS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ca-if4805hs-etched.step/ca-if4805hs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ca-if4805hs.step/ca-if4805hs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Chipanalog datasheet (21 pp, sha256
c063fe96e2b8699c, retrieved 2026-10-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).