C8051F530A-IT

@@ -0,0 +1,128 @@+# C8051F530A-IT++**SILICON LABS** · Pre-ordered MCUs · TSSOP-20++C8051F530A-IT from SILICON LABS, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P0.2 | bidirectional | Port 0.2, digital I/O or analog input. |+| 2 | P0.1 | bidirectional | Port 0.1, digital I/O or analog input. |+| 3 | RST/C2CK | bidirectional | Device reset (open-drain output of internal POR or VDD monitor, driven low externally to force a system reset; 1 kΩ pullup to VREGIN recommended) and clock signal for the C2 debug interface. |+| 4 | P0.0/VREF | bidirectional | Port 0.0, digital I/O or analog input, also external VREF input. |+| 5 | GND | power_in | Ground. |+| 6 | VDD | power_in | Core supply voltage. |+| 7 | VREGIN | power_in | On-chip voltage regulator input. |+| 8 | P1.7 | bidirectional | Port 1.7, digital I/O or analog input. |+| 9 | P1.6 | bidirectional | Port 1.6, digital I/O or analog input. |+| 10 | P1.5 | bidirectional | Port 1.5, digital I/O or analog input. |+| 11 | P1.4 | bidirectional | Port 1.4, digital I/O or analog input. |+| 12 | P1.3 | bidirectional | Port 1.3, digital I/O or analog input. |+| 13 | P1.2/CNVSTR | bidirectional | Port 1.2, digital I/O or analog input, also external ADC0 convert-start input. |+| 14 | P1.1 | bidirectional | Port 1.1, digital I/O or analog input. |+| 15 | P1.0/XTAL2 | bidirectional | Port 1.0, digital I/O or analog input, also external clock output (crystal/resonator excitation driver) or external clock input for CMOS, capacitor or RC oscillator configurations. |+| 16 | P0.7/XTAL1 | bidirectional | Port 0.7, digital I/O or analog input, also external oscillator return for a crystal or resonator. |+| 17 | P0.6/C2D | bidirectional | Port 0.6, digital I/O or analog input, also bi-directional data signal for the C2 debug interface. |+| 18 | P0.5/RX | bidirectional | Port 0.5, digital I/O or analog input, with UART RX function on this 'F53xA variant. |+| 19 | P0.4/TX | bidirectional | Port 0.4, digital I/O or analog input, with UART TX function on this 'F53xA variant. |+| 20 | P0.3 | bidirectional | Port 0.3, digital I/O or analog input. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SILICON LABS |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Ambient temperature under bias |  | -55 |  | 135 | °C |  | 25 |+| Storage temperature |  | -65 |  | 150 | °C |  | 25 |+| Voltage on VREGIN with respect to GND | VREGIN | -0.3 |  | 5.5 | V |  | 25 |+| Voltage on VDD with respect to GND | VDD | -0.3 |  | 2.8 | V |  | 25 |+| Maximum output current sunk by any port pin |  |  |  | 100 | mA |  | 25 |+| Maximum output current sourced by any port pin |  |  |  | 100 | mA |  | 25 |+| Maximum total current through VREGIN and GND |  |  |  | 500 | mA |  | 25 |+| Supply input voltage | VREGIN | 1.8 |  | 5.25 | V | Output current < 1 mA, C8051F52xA/53xA | 26 |+| Digital supply voltage | VDD | 1.8 |  | 2.7 | V | C8051F52xA/53xA | 26 |+| System clock | SYSCLK | 0 |  | 25 | MHz |  | 26 |+| Specified operating temperature range |  | -40 |  | 125 | °C |  | 26 |+| Digital supply current, CPU active | IDD |  | 5.1 | 9 | mA | VDD = 2.1 V, Clock = 25 MHz | 26 |+| Digital supply current, CPU active | IDD |  | 7.3 | 13 | mA | VDD = 2.6 V, Clock = 25 MHz | 26 |+| Digital supply current, CPU inactive (Idle) | Idle IDD |  | 2.2 | 5 | mA | VDD = 2.1 V, Clock = 25 MHz | 27 |+| Digital supply current, CPU inactive (Idle) | Idle IDD |  | 3 | 6.5 | mA | VDD = 2.6 V, Clock = 25 MHz | 27 |+| Core supply RAM data retention voltage |  |  | 1.5 |  | V |  | 26 |+| Digital supply current (Stop or Suspend) |  |  | 2 |  | µA | Oscillator not running, VDD Monitor Disabled, T = 25 °C | 27 |+| Digital supply current (Stop or Suspend) |  |  | 50 |  | µA | Oscillator not running, VDD Monitor Disabled, T = 125 °C | 27 |+| ADC integral nonlinearity | INL | -3 |  | 3 | LSB |  | 28 |+| ADC differential nonlinearity | DNL | -1 |  | 1 | LSB | Guaranteed Monotonic | 28 |+| ADC offset error |  | -10 | 1 | 10 | LSB |  | 28 |+| ADC full scale error |  | -20 | 1 | 20 | LSB |  | 28 |+| ADC signal-to-noise plus distortion |  | 60 | 66 |  | dB | 10 kHz sine-wave, single-ended input, 0 to 1 dB below full scale, 200 ksps | 28 |+| ADC SAR conversion clock |  |  |  | 3 | MHz |  | 28 |+| ADC burst mode oscillator |  |  |  | 27 | MHz |  | 28 |+| ADC track/hold acquisition time |  | 1 |  |  | µs |  | 28 |+| ADC throughput rate |  |  |  | 200 | ksps |  | 28 |+| ADC power supply current (from VDD) |  |  | 1050 | 1400 | µA | Operating Mode, 200 ksps | 28 |+| Internal reference output voltage |  | 1.45 | 1.5 | 1.55 | V | 25 °C ambient (REFLV = 0) | 29 |+| Internal reference output voltage |  | 2.15 | 2.2 | 2.25 | V | 25 °C ambient (REFLV = 1), VDD = 2.6 V | 29 |+| VREF temperature coefficient |  |  | 33 |  | ppm/°C |  | 29 |+| Voltage regulator input voltage range | VREGIN | 2.2 |  | 5.25 | V | C8051F52xA/53xA, VDD connected to VREGIN | 30 |+| Voltage regulator input voltage range | VREGIN | 1.8 |  | 2.7 | V | C8051F52xA/53xA, VDD not connected to VREGIN | 30 |+| Regulator output voltage | VDD | 2 | 2.1 | 2.25 | V | Output Current = 1 to 50 mA, REG0MD = 0 | 30 |+| Regulator output voltage | VDD | 2.5 | 2.6 | 2.75 | V | Output Current = 1 to 50 mA, REG0MD = 1 | 30 |+| Regulator bias current |  |  | 1 | 5 | µA | 2.1 V operation (REG0MD = 0; T = 25 °C) | 30 |+| Comparator input offset voltage |  | -15 |  | 15 | mV |  | 31 |+| Comparator input voltage range |  | -0.25 |  |  | V | Inverting or Non-Inverting Input; max printed as VDD + 0.25 | 31 |+| Comparator supply current at DC, Mode 0 |  |  | 6 | 30 | µA | Mode 0 | 31 |+| Comparator positive hysteresis 4 |  | 13 | 20 | 40 | mV | CP0HYP1-0 = 11 | 31 |+| RST output low voltage |  |  |  | 0.8 | V | IOL = 8.5 mA, VDD = 2.1 V | 32 |+| Missing clock detector timeout |  | 100 | 350 | 650 | µs | Time from last system clock rising edge to reset initiation | 32 |+| Reset time delay | TPORDelay |  |  | 350 | µs | Delay between release of any reset source and code execution at location 0x0000 | 32 |+| Minimum RST low time to generate a system reset |  | 10 |  |  | µs |  | 32 |+| VDD monitor low threshold | VRST-LOW | 1.65 | 1.75 | 1.8 | V | C8051F52xA/53xA | 32 |+| VDD monitor high threshold | VRST-HIGH | 2.25 | 2.3 | 2.4 | V | C8051F52xA/53xA | 32 |+| VDD monitor supply current |  |  | 1 | 2 | µA | VDD = 2.1 V | 32 |+| Flash size |  | 7680 |  |  | bytes | 'F530/0A/1/1A | 33 |+| Flash erase cycle time |  | 27 | 32 | 38 | ms |  | 33 |+| Flash write cycle time |  | 57 | 65 | 74 | µs |  | 33 |+| Port I/O output low voltage | VOL |  |  | 45 | mV | VREGIN = 2.7 V: IOL = 70 µA | 33 |+| Port I/O output low voltage | VOL |  |  | 550 | mV | VREGIN = 2.7 V: IOL = 8.5 mA | 33 |+| Port I/O output low voltage | VOL |  |  | 40 | mV | VREGIN = 5.25 V: IOL = 70 µA | 33 |+| Port I/O output low voltage | VOL |  |  | 400 | mV | VREGIN = 5.25 V: IOL = 8.5 mA | 33 |+| Internal oscillator frequency |  |  | 24.53 |  | MHz | IFCN = 111b | 34 |+| Internal oscillator supply current (from VDD) |  |  | 800 | 1100 | µA | Oscillator On, OSCICN[7:6] = 11b | 34 |+| Internal oscillator temperature sensitivity TC1 | TC1 |  | 5 |  | ppm/°C | Constant Supply | 34 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| housing | PC |  | 8. The recommended card reflow profile is per the JEDEC/IPC J-STD￾020 specification for Small Body Components. | 44 |++## CAD (KiCad official)++- Symbol: `C8051F530A-IT`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `c8051f530a-it-etched.step` / `c8051f530a-it-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `c8051f530a-it.step` / `c8051f530a-it.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SILICON LABS datasheet](docs/c8051f530a-it-datasheet.pdf) (220 pp, sha256 `8675c7e56bd30f64`, retrieved 2026-10-31, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/c8051f530a-it-datasheet.pdf)

@@ -0,0 +1,524 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "C8051F530A-IT",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 7.2,+      "dash_mm": 0.18,+      "gap_mm": 0.108,+      "pad_stroke_mm": 0.0432+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.576,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.2,+      3.2,+      -3.055,+      3.055+    ],+    "pads_bbox_mm": [+      -3.6,+      3.6,+      -3.125,+      3.125+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "c8051f530a-it-etched.glb",+    "glb_sha256": "9a170230429f8fe78c33d80d1762462026799c0cb73b0f200a9707ce0cbaea0f",+    "footprint": "c8051f530a-it.kicad_mod",+    "footprint_sha256": "b7ca3a31dd45c1225609f9b94e8ba1534bd16edd193628c8d67a8ea669b26b72",+    "pins": "page.json component.pins",+    "pins_sha256": "5cd517de3bf20e32e82b8f9c2dbb054612898aa66b4ad16ed04e684aeca4b2c2"+  },+  "generator": "adom-wiki 1.8.4 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "P0.2",+      "x": -4.29,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "P0.1",+      "x": -3.7,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "RST/C2CK",+      "x": -3.7,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "P0.0/VREF",+      "x": -3.7,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "GND",+      "x": -3.7,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "VDD",+      "x": -3.7,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "VREGIN",+      "x": -3.7,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "P1.7",+      "x": -3.7,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "P1.6",+      "x": -3.7,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "P1.5",+      "x": -3.7,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "P1.4",+      "x": 3.7,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "P1.3",+      "x": 3.7,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "P1.2/CNVSTR",+      "x": 3.7,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "P1.1",+      "x": 3.7,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "P1.0/XTAL2",+      "x": 3.7,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "P0.7/XTAL1",+      "x": 3.7,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "P0.6/C2D",+      "x": 3.7,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "P0.5/RX",+      "x": 3.7,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "P0.4/TX",+      "x": 3.7,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "P0.3",+      "x": 3.7,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,336 @@+(footprint "TSSOP-20_4.4x6.5mm_P0.65mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153)")+	(tags "TSSOP SO")+	(property "Reference" "REF**"+		(at 0 -4.2 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "TSSOP-20_4.4x6.5mm_P0.65mm"+		(at 0 4.2 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -2.31 -3.385)+		(end 2.31 -3.385)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.31 3.385)+		(end -2.31 3.385)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -3.86 -2.93)+			(xy -4.19 -2.69)+			(xy -4.19 -3.17)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.85 -3.38)+		(end -2.45 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -3.85 3.38)+		(end -3.85 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 -3.5)+		(end 2.45 -3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 -3.38)+		(end -2.45 -3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 3.38)+		(end -3.85 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -2.45 3.5)+		(end -2.45 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 -3.5)+		(end 2.45 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 -3.38)+		(end 3.85 -3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 3.38)+		(end 2.45 3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 2.45 3.5)+		(end -2.45 3.5)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 3.85 -3.38)+		(end 3.85 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 3.85 3.38)+		(end 2.45 3.38)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_poly+		(pts+			(xy -1.2 -3.25)+			(xy 2.2 -3.25)+			(xy 2.2 3.25)+			(xy -2.2 3.25)+			(xy -2.2 -2.25)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -2.8625 -2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -2.8625 -2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -2.8625 -1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2.8625 -0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -2.8625 -0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -2.8625 0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -2.8625 0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -2.8625 1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -2.8625 2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -2.8625 2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at 2.8625 2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at 2.8625 2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 2.8625 1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 2.8625 0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 2.8625 0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 2.8625 -0.325)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 2.8625 -0.975)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 2.8625 -1.625)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 2.8625 -2.275)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 2.8625 -2.925)+		(size 1.475 0.4)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSSOP-20_4.4x6.5mm_P0.65mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)

@@ -0,0 +1,93 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "C8051F530A-IT" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 15.24 0) (effects (font (size 1.27 1.27))))+    (property "Value" "C8051F530A-IT" (at 0 -17.78 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "C8051F530A-IT_0_1"+    (rectangle (start -12.70 12.70) (end 12.70 -15.24)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "C8051F530A-IT_1_1"+    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+      (name "P0.2" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+      (name "P0.1" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+      (name "RST/C2CK" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+      (name "P0.0/VREF" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 0.00 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -2.54 0) (length 5.08)+      (name "VDD" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -5.08 0) (length 5.08)+      (name "VREGIN" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "P1.7" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+      (name "P1.6" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+      (name "P1.5" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+      (name "P0.3" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+      (name "P0.4/TX" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "P0.5/RX" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "P0.6/C2D" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+      (name "P0.7/XTAL1" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "P1.0/XTAL2" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "P1.1" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "P1.2/CNVSTR" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "P1.3" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+      (name "P1.4" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,162 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TSSOP-20_4.4x6.5mm_P0.65mm">+  <description>TSSOP-20, 4.4 x 6.5 mm, 0.65 mm pitch</description>+  <smd name="1" x="-2.8625" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="2" x="-2.8625" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="3" x="-2.8625" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="4" x="-2.8625" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="5" x="-2.8625" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="6" x="-2.8625" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="7" x="-2.8625" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="8" x="-2.8625" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="9" x="-2.8625" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="10" x="-2.8625" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="11" x="2.8625" y="-2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="12" x="2.8625" y="-2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="13" x="2.8625" y="-1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="14" x="2.8625" y="-0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="15" x="2.8625" y="-0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="16" x="2.8625" y="0.3250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="17" x="2.8625" y="0.9750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="18" x="2.8625" y="1.6250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="19" x="2.8625" y="2.2750" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <smd name="20" x="2.8625" y="2.9250" dx="1.4750" dy="0.4000" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-3.8600" y="2.9300"/>+    <vertex x="-4.1900" y="2.6900"/>+    <vertex x="-4.1900" y="3.1700"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-1.2000" y="3.2500"/>+    <vertex x="2.2000" y="3.2500"/>+    <vertex x="2.2000" y="-3.2500"/>+    <vertex x="-2.2000" y="-3.2500"/>+    <vertex x="-2.2000" y="2.2500"/>+  </polygon>+  <wire x1="-2.3100" y1="3.3850" x2="2.3100" y2="3.3850" width="0.1200" layer="21"/>+  <wire x1="2.3100" y1="-3.3850" x2="-2.3100" y2="-3.3850" width="0.1200" layer="21"/>+  <text x="0" y="4.262" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-4.262" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="C8051F530A-IT">+  <wire x1="-12.7" y1="12.7" x2="12.7" y2="12.7" width="0.254" layer="94"/>+  <wire x1="12.7" y1="12.7" x2="12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-15.24" x2="-12.7" y2="-15.24" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-15.24" x2="-12.7" y2="12.7" width="0.254" layer="94"/>+  <text x="0.0000" y="15.2400" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-17.7800" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="P0.2" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="P0.1" x="-17.78" y="7.62" length="middle" direction="io"/>+  <pin name="RST/C2CK" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="P0.0/VREF" x="-17.78" y="2.54" length="middle" direction="io"/>+  <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="VDD" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="VREGIN" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+  <pin name="P1.7" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="P1.6" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="P1.5" x="-17.78" y="-12.7" length="middle" direction="io"/>+  <pin name="P0.3" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+  <pin name="P0.4/TX" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="P0.5/RX" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="P0.6/C2D" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="P0.7/XTAL1" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="P1.0/XTAL2" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="P1.1" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="P1.2/CNVSTR" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="P1.3" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="P1.4" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="C8051F530A-IT" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="C8051F530A-IT" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="TSSOP-20_4.4x6.5mm_P0.65mm">+      <connects>+        <connect gate="G$1" pin="P0.2" pad="1"/>+        <connect gate="G$1" pin="P0.1" pad="2"/>+        <connect gate="G$1" pin="RST/C2CK" pad="3"/>+        <connect gate="G$1" pin="P0.0/VREF" pad="4"/>+        <connect gate="G$1" pin="GND" pad="5"/>+        <connect gate="G$1" pin="VDD" pad="6"/>+        <connect gate="G$1" pin="VREGIN" pad="7"/>+        <connect gate="G$1" pin="P1.7" pad="8"/>+        <connect gate="G$1" pin="P1.6" pad="9"/>+        <connect gate="G$1" pin="P1.5" pad="10"/>+        <connect gate="G$1" pin="P0.3" pad="20"/>+        <connect gate="G$1" pin="P0.4/TX" pad="19"/>+        <connect gate="G$1" pin="P0.5/RX" pad="18"/>+        <connect gate="G$1" pin="P0.6/C2D" pad="17"/>+        <connect gate="G$1" pin="P0.7/XTAL1" pad="16"/>+        <connect gate="G$1" pin="P1.0/XTAL2" pad="15"/>+        <connect gate="G$1" pin="P1.1" pad="14"/>+        <connect gate="G$1" pin="P1.2/CNVSTR" pad="13"/>+        <connect gate="G$1" pin="P1.3" pad="12"/>+        <connect gate="G$1" pin="P1.4" pad="11"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,6627 @@+ISO-10303-21;+HEADER;+/* TSSOP-20_4.4x6.5mm_P0.65mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of TSSOP-20_4.4x6.5mm_P0.65mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'TSSOP-20_4.4x6.5mm_P0.65mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('TSSOP-20_4.4x6.5mm_P0.65mm','TSSOP-20_4.4x6.5mm_P0.65mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design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ontext #1','3D Context with UNIT and UNCERTAINTY') );+#6224=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#6225=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#6226=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#6227=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6224,'distance_accuracy_value','confusion accuracy');+#6228=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#6229=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#6230,#6240,#6241,#6242,#6243,#6244,#6245,#6246,#6247,#6248,#6249,#6250,#6251,#6252,#6253,#6262,#6263,#6264,#6265,#6266,#6267,#6268,#6269,#6270,#6271,#6272,#6273,#6274,#6275,#6276,#6277,#6278,#6279,#6280,#6281,#6282,#6283,#6284,#6285,#6286,#6287,#6288,#6289,#6290,#6291,#6292,#6293,#6294,#6295,#6296,#6297,#6298,#6299,#6300,#6301,#6302,#6303,#6304,#6305,#6306,#6307,#6308,#6309,#6310,#6311,#6312,#6313,#6314,#6315,#6316,#6317,#6318,#6319,#6320,#6321,#6322,#6323,#6324,#6325,#6326,#6327,#6328,#6329,#6330,#6331,#6332,#6333,#6334,#6335,#6336,#6337,#6338,#6339,#6340,#6341,#6342,#6343,#6344,#6345,#6346,#6347,#6348,#6349,#6350,#6351,#6352,#6353,#6354,#6355,#6356,#6357,#6358,#6359,#6360,#6361,#6362,#6363,#6364,#6365,#6366,#6367,#6368,#6369,#6370,#6371,#6372,#6373,#6374,#6375,#6376,#6377,#6378,#6379,#6380,#6381,#6382,#6383,#6384,#6385,#6386,#6387,#6388,#6389,#6390,#6391,#6392,#6393,#6394,#6395,#6396,#6397,#6398,#6399,#6400,#6401,#6402,#6403,#6404,#6405,#6406,#6407,#6408,#6409,#6410,#6411,#6412,#6413,#6414,#6415,#6416,#6417,#6418,#6419,#6420,#6421,#6422,#6423,#6424,#6425,#6426,#6427,#6428,#6429,#6430,#6431,#6432,#6433,#6434,#6435,#6436,#6437,#6438,#6439,#6440,#6441,#6442,#6443,#6444,#6445,#6446,#6447,#6448,#6449,#6450,#6451,#6452,#6453,#6454,#6455,#6456,#6457,#6458,#6459,#6460,#6461,#6462,#6463,#6464,#6465,#6466,#6467,#6468,#6469,#6470,#6471,#6472,#6473,#6474,#6475,#6476,#6477,#6478,#6479,#6480,#6481,#6482,#6483,#6484,#6485,#6486,#6487,#6488,#6489,#6490,#6491,#6492,#6493,#6494,#6495,#6496,#6497,#6498,#6499,#6500,#6501,#6502,#6503,#6504,#6505,#6506,#6507,#6508,#6509,#6510,#6511,#6512,#6513,#6514,#6515,#6516,#6517,#6518,#6519,#6520,#6521,#6522,#6523,#6524,#6525,#6526,#6527,#6528,#6529,#6530,#6531,#6532,#6533,#6534,#6535,#6536,#6537,#6538,#6539,#6540,#6541,#6542,#6543,#6544,#6545,#6546,#6547,#6548,#6549,#6550,#6551,#6552,#6553,#6554,#6555,#6556,#6557,#6558,#6559,#6560,#6561,#6562,#6563,#6564,#6565,#6566,#6567,#6568,#6569,#6570,#6571,#6572,#6573),#6223);+#6230=STYLED_ITEM('color',(#6231),#17);+#6231=PRESENTATION_STYLE_ASSIGNMENT((#6232,#6238));+#6232=SURFACE_STYLE_USAGE(.BOTH.,#6233);+#6233=SURFACE_SIDE_STYLE('',(#6234));+#6234=SURFACE_STYLE_FILL_AREA(#6235);+#6235=FILL_AREA_STYLE('',(#6236));+#6236=FILL_AREA_STYLE_COLOUR('',#6237);+#6237=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#6238=CURVE_STYLE('',#6239,POSITIVE_LENGTH_MEASURE(0.1),#6237);+#6239=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#6240=STYLED_ITEM('color',(#6231),#43);+#6241=STYLED_ITEM('color',(#6231),#96);+#6242=STYLED_ITEM('color',(#6231),#109);+#6243=STYLED_ITEM('color',(#6231),#128);+#6244=STYLED_ITEM('color',(#6231),#141);+#6245=STYLED_ITEM('color',(#6231),#234);+#6246=STYLED_ITEM('color',(#6231),#327);+#6247=STYLED_ITEM('color',(#6231),#340);+#6248=STYLED_ITEM('color',(#6231),#353);+#6249=STYLED_ITEM('color',(#6231),#362);+#6250=STYLED_ITEM('color',(#6231),#377);+#6251=STYLED_ITEM('color',(#6231),#441);+#6252=STYLED_ITEM('color',(#6231),#452);+#6253=STYLED_ITEM('color',(#6254),#471);+#6254=PRESENTATION_STYLE_ASSIGNMENT((#6255,#6261));+#6255=SURFACE_STYLE_USAGE(.BOTH.,#6256);+#6256=SURFACE_SIDE_STYLE('',(#6257));+#6257=SURFACE_STYLE_FILL_AREA(#6258);+#6258=FILL_AREA_STYLE('',(#6259));+#6259=FILL_AREA_STYLE_COLOUR('',#6260);+#6260=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#6261=CURVE_STYLE('',#6239,POSITIVE_LENGTH_MEASURE(0.1),#6260);+#6262=STYLED_ITEM('color',(#6231),#496);+#6263=STYLED_ITEM('color',(#6254),#514);+#6264=STYLED_ITEM('color',(#6231),#535);+#6265=STYLED_ITEM('color',(#6254),#553);+#6266=STYLED_ITEM('color',(#6231),#574);+#6267=STYLED_ITEM('color',(#6254),#592);+#6268=STYLED_ITEM('color',(#6231),#613);+#6269=STYLED_ITEM('color',(#6254),#631);+#6270=STYLED_ITEM('color',(#6231),#652);+#6271=STYLED_ITEM('color',(#6254),#670);+#6272=STYLED_ITEM('color',(#6231),#691);+#6273=STYLED_ITEM('color',(#6254),#709);+#6274=STYLED_ITEM('color',(#6231),#730);+#6275=STYLED_ITEM('color',(#6254),#748);+#6276=STYLED_ITEM('color',(#6231),#769);+#6277=STYLED_ITEM('color',(#6254),#787);+#6278=STYLED_ITEM('color',(#6231),#808);+#6279=STYLED_ITEM('color',(#6254),#826);+#6280=STYLED_ITEM('color',(#6231),#847);+#6281=STYLED_ITEM('color',(#6231),#857);+#6282=STYLED_ITEM('color',(#6254),#869);+#6283=STYLED_ITEM('color',(#6231),#890);+#6284=STYLED_ITEM('color',(#6254),#908);+#6285=STYLED_ITEM('color',(#6231),#929);+#6286=STYLED_ITEM('color',(#6254),#947);+#6287=STYLED_ITEM('color',(#6231),#968);+#6288=STYLED_ITEM('color',(#6254),#986);+#6289=STYLED_ITEM('color',(#6231),#1007);+#6290=STYLED_ITEM('color',(#6254),#1025);+#6291=STYLED_ITEM('color',(#6231),#1046);+#6292=STYLED_ITEM('color',(#6254),#1064);+#6293=STYLED_ITEM('color',(#6231),#1085);+#6294=STYLED_ITEM('color',(#6254),#1103);+#6295=STYLED_ITEM('color',(#6231),#1124);+#6296=STYLED_ITEM('color',(#6254),#1142);+#6297=STYLED_ITEM('color',(#6231),#1163);+#6298=STYLED_ITEM('color',(#6254),#1181);+#6299=STYLED_ITEM('color',(#6231),#1202);+#6300=STYLED_ITEM('color',(#6254),#1220);+#6301=STYLED_ITEM('color',(#6231),#1241);+#6302=STYLED_ITEM('color',(#6231),#1258);+#6303=STYLED_ITEM('color',(#6231),#1273);+#6304=STYLED_ITEM('color',(#6231),#1288);+#6305=STYLED_ITEM('color',(#6254),#1299);+#6306=STYLED_ITEM('color',(#6231),#1323);+#6307=STYLED_ITEM('color',(#6231),#1417);+#6308=STYLED_ITEM('color',(#6231),#1431);+#6309=STYLED_ITEM('color',(#6231),#1445);+#6310=STYLED_ITEM('color',(#6231),#1459);+#6311=STYLED_ITEM('color',(#6254),#1553);+#6312=STYLED_ITEM('color',(#6231),#1573);+#6313=STYLED_ITEM('color',(#6254),#1604);+#6314=STYLED_ITEM('color',(#6254),#1676);+#6315=STYLED_ITEM('color',(#6254),#1694);+#6316=STYLED_ITEM('color',(#6231),#1747);+#6317=STYLED_ITEM('color',(#6254),#1758);+#6318=STYLED_ITEM('color',(#6254),#1818);+#6319=STYLED_ITEM('color',(#6254),#1835);+#6320=STYLED_ITEM('color',(#6231),#1888);+#6321=STYLED_ITEM('color',(#6254),#1899);+#6322=STYLED_ITEM('color',(#6254),#1959);+#6323=STYLED_ITEM('color',(#6254),#1976);+#6324=STYLED_ITEM('color',(#6231),#2029);+#6325=STYLED_ITEM('color',(#6254),#2040);+#6326=STYLED_ITEM('color',(#6254),#2100);+#6327=STYLED_ITEM('color',(#6254),#2117);+#6328=STYLED_ITEM('color',(#6231),#2170);+#6329=STYLED_ITEM('color',(#6254),#2181);+#6330=STYLED_ITEM('color',(#6254),#2241);+#6331=STYLED_ITEM('color',(#6254),#2258);+#6332=STYLED_ITEM('color',(#6231),#2311);+#6333=STYLED_ITEM('color',(#6254),#2322);+#6334=STYLED_ITEM('color',(#6254),#2382);+#6335=STYLED_ITEM('color',(#6254),#2399);+#6336=STYLED_ITEM('color',(#6231),#2452);+#6337=STYLED_ITEM('color',(#6254),#2463);+#6338=STYLED_ITEM('color',(#6254),#2523);+#6339=STYLED_ITEM('color',(#6254),#2540);+#6340=STYLED_ITEM('color',(#6231),#2593);+#6341=STYLED_ITEM('color',(#6254),#2604);+#6342=STYLED_ITEM('color',(#6254),#2664);+#6343=STYLED_ITEM('color',(#6254),#2681);+#6344=STYLED_ITEM('color',(#6231),#2734);+#6345=STYLED_ITEM('color',(#6254),#2745);+#6346=STYLED_ITEM('color',(#6254),#2805);+#6347=STYLED_ITEM('color',(#6254),#2822);+#6348=STYLED_ITEM('color',(#6231),#2875);+#6349=STYLED_ITEM('color',(#6254),#2883);+#6350=STYLED_ITEM('color',(#6254),#2941);+#6351=STYLED_ITEM('color',(#6254),#2958);+#6352=STYLED_ITEM('color',(#6254),#3006);+#6353=STYLED_ITEM('color',(#6254),#3072);+#6354=STYLED_ITEM('color',(#6254),#3088);+#6355=STYLED_ITEM('color',(#6231),#3136);+#6356=STYLED_ITEM('color',(#6254),#3146);+#6357=STYLED_ITEM('color',(#6254),#3206);+#6358=STYLED_ITEM('color',(#6254),#3222);+#6359=STYLED_ITEM('color',(#6231),#3275);+#6360=STYLED_ITEM('color',(#6254),#3286);+#6361=STYLED_ITEM('color',(#6254),#3346);+#6362=STYLED_ITEM('color',(#6254),#3362);+#6363=STYLED_ITEM('color',(#6231),#3415);+#6364=STYLED_ITEM('color',(#6254),#3426);+#6365=STYLED_ITEM('color',(#6254),#3486);+#6366=STYLED_ITEM('color',(#6254),#3502);+#6367=STYLED_ITEM('color',(#6231),#3555);+#6368=STYLED_ITEM('color',(#6254),#3566);+#6369=STYLED_ITEM('color',(#6254),#3626);+#6370=STYLED_ITEM('color',(#6254),#3642);+#6371=STYLED_ITEM('color',(#6231),#3695);+#6372=STYLED_ITEM('color',(#6254),#3706);+#6373=STYLED_ITEM('color',(#6254),#3766);+#6374=STYLED_ITEM('color',(#6254),#3782);+#6375=STYLED_ITEM('color',(#6231),#3835);+#6376=STYLED_ITEM('color',(#6254),#3846);+#6377=STYLED_ITEM('color',(#6254),#3906);+#6378=STYLED_ITEM('color',(#6254),#3922);+#6379=STYLED_ITEM('color',(#6231),#3975);+#6380=STYLED_ITEM('color',(#6254),#3986);+#6381=STYLED_ITEM('color',(#6254),#4046);+#6382=STYLED_ITEM('color',(#6254),#4062);+#6383=STYLED_ITEM('color',(#6231),#4115);+#6384=STYLED_ITEM('color',(#6254),#4126);+#6385=STYLED_ITEM('color',(#6254),#4186);+#6386=STYLED_ITEM('color',(#6254),#4202);+#6387=STYLED_ITEM('color',(#6231),#4255);+#6388=STYLED_ITEM('color',(#6254),#4266);+#6389=STYLED_ITEM('color',(#6254),#4326);+#6390=STYLED_ITEM('color',(#6254),#4342);+#6391=STYLED_ITEM('color',(#6254),#4393);+#6392=STYLED_ITEM('color',(#6254),#4403);+#6393=STYLED_ITEM('color',(#6254),#4415);+#6394=STYLED_ITEM('color',(#6254),#4427);+#6395=STYLED_ITEM('color',(#6254),#4439);+#6396=STYLED_ITEM('color',(#6254),#4451);+#6397=STYLED_ITEM('color',(#6254),#4463);+#6398=STYLED_ITEM('color',(#6254),#4475);+#6399=STYLED_ITEM('color',(#6254),#4487);+#6400=STYLED_ITEM('color',(#6254),#4499);+#6401=STYLED_ITEM('color',(#6231),#4511);+#6402=STYLED_ITEM('color',(#6231),#4540);+#6403=STYLED_ITEM('color',(#6254),#4549);+#6404=STYLED_ITEM('color',(#6254),#4561);+#6405=STYLED_ITEM('color',(#6254),#4573);+#6406=STYLED_ITEM('color',(#6254),#4585);+#6407=STYLED_ITEM('color',(#6254),#4597);+#6408=STYLED_ITEM('color',(#6254),#4609);+#6409=STYLED_ITEM('color',(#6254),#4621);+#6410=STYLED_ITEM('color',(#6254),#4633);+#6411=STYLED_ITEM('color',(#6254),#4645);+#6412=STYLED_ITEM('color',(#6231),#4657);+#6413=STYLED_ITEM('color',(#6254),#4666);+#6414=STYLED_ITEM('color',(#6231),#4676);+#6415=STYLED_ITEM('color',(#6254),#4683);+#6416=STYLED_ITEM('color',(#6254),#4693);+#6417=STYLED_ITEM('color',(#6254),#4704);+#6418=STYLED_ITEM('color',(#6254),#4714);+#6419=STYLED_ITEM('color',(#6254),#4724);+#6420=STYLED_ITEM('color',(#6254),#4734);+#6421=STYLED_ITEM('color',(#6254),#4744);+#6422=STYLED_ITEM('color',(#6254),#4754);+#6423=STYLED_ITEM('color',(#6254),#4763);+#6424=STYLED_ITEM('color',(#6254),#4773);+#6425=STYLED_ITEM('color',(#6254),#4783);+#6426=STYLED_ITEM('color',(#6254),#4793);+#6427=STYLED_ITEM('color',(#6254),#4803);+#6428=STYLED_ITEM('color',(#6254),#4813);+#6429=STYLED_ITEM('color',(#6254),#4823);+#6430=STYLED_ITEM('color',(#6254),#4833);+#6431=STYLED_ITEM('color',(#6254),#4841);+#6432=STYLED_ITEM('color',(#6254),#4851);+#6433=STYLED_ITEM('color',(#6254),#4861);+#6434=STYLED_ITEM('color',(#6254),#4871);+#6435=STYLED_ITEM('color',(#6254),#4881);+#6436=STYLED_ITEM('color',(#6254),#4891);+#6437=STYLED_ITEM('color',(#6254),#4901);+#6438=STYLED_ITEM('color',(#6254),#4911);+#6439=STYLED_ITEM('color',(#6254),#4919);+#6440=STYLED_ITEM('color',(#6254),#4929);+#6441=STYLED_ITEM('color',(#6254),#4939);+#6442=STYLED_ITEM('color',(#6254),#4949);+#6443=STYLED_ITEM('color',(#6254),#4959);+#6444=STYLED_ITEM('color',(#6254),#4969);+#6445=STYLED_ITEM('color',(#6254),#4979);+#6446=STYLED_ITEM('color',(#6254),#4989);+#6447=STYLED_ITEM('color',(#6254),#4997);+#6448=STYLED_ITEM('color',(#6254),#5007);+#6449=STYLED_ITEM('color',(#6254),#5017);+#6450=STYLED_ITEM('color',(#6254),#5027);+#6451=STYLED_ITEM('color',(#6254),#5037);+#6452=STYLED_ITEM('color',(#6254),#5047);+#6453=STYLED_ITEM('color',(#6254),#5057);+#6454=STYLED_ITEM('color',(#6254),#5067);+#6455=STYLED_ITEM('color',(#6254),#5075);+#6456=STYLED_ITEM('color',(#6254),#5085);+#6457=STYLED_ITEM('color',(#6254),#5095);+#6458=STYLED_ITEM('color',(#6254),#5105);+#6459=STYLED_ITEM('color',(#6254),#5115);+#6460=STYLED_ITEM('color',(#6254),#5125);+#6461=STYLED_ITEM('color',(#6254),#5135);+#6462=STYLED_ITEM('color',(#6254),#5145);+#6463=STYLED_ITEM('color',(#6254),#5153);+#6464=STYLED_ITEM('color',(#6254),#5163);+#6465=STYLED_ITEM('color',(#6254),#5173);+#6466=STYLED_ITEM('color',(#6254),#5183);+#6467=STYLED_ITEM('color',(#6254),#5193);+#6468=STYLED_ITEM('color',(#6254),#5203);+#6469=STYLED_ITEM('color',(#6254),#5213);+#6470=STYLED_ITEM('color',(#6254),#5223);+#6471=STYLED_ITEM('color',(#6254),#5231);+#6472=STYLED_ITEM('color',(#6254),#5241);+#6473=STYLED_ITEM('color',(#6254),#5251);+#6474=STYLED_ITEM('color',(#6254),#5261);+#6475=STYLED_ITEM('color',(#6254),#5271);+#6476=STYLED_ITEM('color',(#6254),#5281);+#6477=STYLED_ITEM('color',(#6254),#5291);+#6478=STYLED_ITEM('color',(#6254),#5301);+#6479=STYLED_ITEM('color',(#6254),#5309);+#6480=STYLED_ITEM('color',(#6254),#5319);+#6481=STYLED_ITEM('color',(#6254),#5329);+#6482=STYLED_ITEM('color',(#6254),#5339);+#6483=STYLED_ITEM('color',(#6254),#5349);+#6484=STYLED_ITEM('color',(#6254),#5359);+#6485=STYLED_ITEM('color',(#6254),#5369);+#6486=STYLED_ITEM('color',(#6254),#5379);+#6487=STYLED_ITEM('color',(#6254),#5387);+#6488=STYLED_ITEM('color',(#6254),#5397);+#6489=STYLED_ITEM('color',(#6254),#5407);+#6490=STYLED_ITEM('color',(#6254),#5417);+#6491=STYLED_ITEM('color',(#6254),#5427);+#6492=STYLED_ITEM('color',(#6254),#5437);+#6493=STYLED_ITEM('color',(#6254),#5447);+#6494=STYLED_ITEM('color',(#6254),#5455);+#6495=STYLED_ITEM('color',(#6254),#5466);+#6496=STYLED_ITEM('color',(#6254),#5475);+#6497=STYLED_ITEM('color',(#6254),#5485);+#6498=STYLED_ITEM('color',(#6254),#5495);+#6499=STYLED_ITEM('color',(#6254),#5505);+#6500=STYLED_ITEM('color',(#6254),#5515);+#6501=STYLED_ITEM('color',(#6254),#5524);+#6502=STYLED_ITEM('color',(#6254),#5534);+#6503=STYLED_ITEM('color',(#6254),#5544);+#6504=STYLED_ITEM('color',(#6254),#5553);+#6505=STYLED_ITEM('color',(#6254),#5563);+#6506=STYLED_ITEM('color',(#6254),#5573);+#6507=STYLED_ITEM('color',(#6254),#5583);+#6508=STYLED_ITEM('color',(#6254),#5593);+#6509=STYLED_ITEM('color',(#6254),#5601);+#6510=STYLED_ITEM('color',(#6254),#5611);+#6511=STYLED_ITEM('color',(#6254),#5621);+#6512=STYLED_ITEM('color',(#6254),#5630);+#6513=STYLED_ITEM('color',(#6254),#5640);+#6514=STYLED_ITEM('color',(#6254),#5650);+#6515=STYLED_ITEM('color',(#6254),#5660);+#6516=STYLED_ITEM('color',(#6254),#5670);+#6517=STYLED_ITEM('color',(#6254),#5678);+#6518=STYLED_ITEM('color',(#6254),#5688);+#6519=STYLED_ITEM('color',(#6254),#5698);+#6520=STYLED_ITEM('color',(#6254),#5707);+#6521=STYLED_ITEM('color',(#6254),#5717);+#6522=STYLED_ITEM('color',(#6254),#5727);+#6523=STYLED_ITEM('color',(#6254),#5737);+#6524=STYLED_ITEM('color',(#6254),#5747);+#6525=STYLED_ITEM('color',(#6254),#5755);+#6526=STYLED_ITEM('color',(#6254),#5765);+#6527=STYLED_ITEM('color',(#6254),#5775);+#6528=STYLED_ITEM('color',(#6254),#5784);+#6529=STYLED_ITEM('color',(#6254),#5794);+#6530=STYLED_ITEM('color',(#6254),#5804);+#6531=STYLED_ITEM('color',(#6254),#5814);+#6532=STYLED_ITEM('color',(#6254),#5824);+#6533=STYLED_ITEM('color',(#6254),#5832);+#6534=STYLED_ITEM('color',(#6254),#5842);+#6535=STYLED_ITEM('color',(#6254),#5852);+#6536=STYLED_ITEM('color',(#6254),#5861);+#6537=STYLED_ITEM('color',(#6254),#5871);+#6538=STYLED_ITEM('color',(#6254),#5881);+#6539=STYLED_ITEM('color',(#6254),#5891);+#6540=STYLED_ITEM('color',(#6254),#5901);+#6541=STYLED_ITEM('color',(#6254),#5909);+#6542=STYLED_ITEM('color',(#6254),#5919);+#6543=STYLED_ITEM('color',(#6254),#5929);+#6544=STYLED_ITEM('color',(#6254),#5938);+#6545=STYLED_ITEM('color',(#6254),#5948);+#6546=STYLED_ITEM('color',(#6254),#5958);+#6547=STYLED_ITEM('color',(#6254),#5968);+#6548=STYLED_ITEM('color',(#6254),#5978);+#6549=STYLED_ITEM('color',(#6254),#5986);+#6550=STYLED_ITEM('color',(#6254),#5996);+#6551=STYLED_ITEM('color',(#6254),#6006);+#6552=STYLED_ITEM('color',(#6254),#6015);+#6553=STYLED_ITEM('color',(#6254),#6025);+#6554=STYLED_ITEM('color',(#6254),#6035);+#6555=STYLED_ITEM('color',(#6254),#6045);+#6556=STYLED_ITEM('color',(#6254),#6055);+#6557=STYLED_ITEM('color',(#6254),#6063);+#6558=STYLED_ITEM('color',(#6254),#6073);+#6559=STYLED_ITEM('color',(#6254),#6083);+#6560=STYLED_ITEM('color',(#6254),#6092);+#6561=STYLED_ITEM('color',(#6254),#6102);+#6562=STYLED_ITEM('color',(#6254),#6112);+#6563=STYLED_ITEM('color',(#6254),#6122);+#6564=STYLED_ITEM('color',(#6254),#6132);+#6565=STYLED_ITEM('color',(#6254),#6140);+#6566=STYLED_ITEM('color',(#6254),#6150);+#6567=STYLED_ITEM('color',(#6254),#6160);+#6568=STYLED_ITEM('color',(#6254),#6169);+#6569=STYLED_ITEM('color',(#6254),#6179);+#6570=STYLED_ITEM('color',(#6254),#6189);+#6571=STYLED_ITEM('color',(#6254),#6199);+#6572=STYLED_ITEM('color',(#6254),#6209);+#6573=STYLED_ITEM('color',(#6574),#6217);+#6574=PRESENTATION_STYLE_ASSIGNMENT((#6575,#6581));+#6575=SURFACE_STYLE_USAGE(.BOTH.,#6576);+#6576=SURFACE_SIDE_STYLE('',(#6577));+#6577=SURFACE_STYLE_FILL_AREA(#6578);+#6578=FILL_AREA_STYLE('',(#6579));+#6579=FILL_AREA_STYLE_COLOUR('',#6580);+#6580=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#6581=CURVE_STYLE('',#6239,POSITIVE_LENGTH_MEASURE(0.1),#6580);+ENDSEC;+END-ISO-10303-21;