C8051F321-GMR

@@ -0,0 +1,170 @@+# C8051F321-GMR++**SILICON LABS** · SILICON LABS · QFN-28-EP(5x5)++C8051F321-GMR from SILICON LABS, in a QFN-28-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P0.1 | bidirectional | Port 0.1 digital I/O pin, configurable through the crossbar as a port pin or peripheral signal. |+| 2 | P0.0 | bidirectional | Port 0.0 digital I/O pin, configurable through the crossbar as a port pin or peripheral signal. |+| 3 | GND | power_in | Ground reference for the device. |+| 4 | D+ | bidirectional | USB D+ data line for the integrated full-speed/low-speed USB transceiver. |+| 5 | D- | bidirectional | USB D- data line for the integrated full-speed/low-speed USB transceiver. |+| 6 | VDD | power_in | Power supply voltage input of 2.7-3.6 V; the datasheet also lists a 3.3 V voltage regulator output on this pin. |+| 7 | REGIN | power_in | 5 V regulator input to the on-chip voltage regulator. |+| 8 | VBUS | power_in | VBUS sense input connected to the USB VBUS signal; a 5 V signal on this pin indicates a USB connection. |+| 9 | /RST/C2CK | bidirectional | Device reset open-drain output of the POR or VDD monitor, which an external source can drive low for at least 15 µs; also the C2 debug interface clock. |+| 10 | P3.0/C2D | bidirectional | Port 3.0 GPIO pin that doubles as the bidirectional data signal for the C2 debug interface. |+| 11 | P2.3 | bidirectional | Port 2.3 digital I/O or analog input pin, available to the crossbar. |+| 12 | P2.2 | bidirectional | Port 2.2 digital I/O or analog input pin, available to the crossbar. |+| 13 | P2.1 | bidirectional | Port 2.1 digital I/O or analog input pin, available to the crossbar. |+| 14 | P2.0 | bidirectional | Port 2.0 digital I/O or analog input pin, available to the crossbar. |+| 15 | P1.7 | bidirectional | Port 1.7 digital I/O or analog input pin, available to the crossbar. |+| 16 | P1.6 | bidirectional | Port 1.6 digital I/O or analog input pin, available to the crossbar. |+| 17 | P1.5 | bidirectional | Port 1.5 digital I/O or analog input pin, available to the crossbar. |+| 18 | P1.4 | bidirectional | Port 1.4 digital I/O or analog input pin, available to the crossbar. |+| 19 | P1.3 | bidirectional | Port 1.3 digital I/O or analog input pin, available to the crossbar. |+| 20 | P1.2 | bidirectional | Port 1.2 digital I/O or analog input pin, available to the crossbar. |+| 21 | P1.1 | bidirectional | Port 1.1 digital I/O or analog input pin, available to the crossbar. |+| 22 | P1.0 | bidirectional | Port 1.0 digital I/O or analog input pin, available to the crossbar. |+| 23 | P0.7/VREF | bidirectional | Port 0.7 digital I/O pin that also serves as the external VREF input or output. |+| 24 | P0.6/CNVSTR | bidirectional | Port 0.6 digital I/O pin that also serves as the ADC0 external convert start input. |+| 25 | P0.5 | bidirectional | Port 0.5 digital I/O pin, configurable through the crossbar as a port pin or peripheral signal. |+| 26 | P0.4 | bidirectional | Port 0.4 digital I/O pin, configurable through the crossbar as a port pin or peripheral signal. |+| 27 | P0.3/XTAL2 | bidirectional | Port 0.3 digital I/O pin that serves as the external oscillator excitation driver for a crystal or resonator, or an external clock input. |+| 28 | P0.2/XTAL1 | bidirectional | Port 0.2 digital I/O pin that serves as the external oscillator return for a crystal or resonator, or an external clock input. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | SILICON LABS |+| Package | QFN-28-EP(5x5) |+| Category | Embedded Processors & Controllers |+| Pins | 29 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Ambient temperature under bias |  | -55 |  | 125 | °C |  | 29 |+| Storage Temperature |  | -65 |  | 150 | °C |  | 29 |+| Voltage on any Port I/O Pin or /RST with respect to GND |  | -0.3 |  | 5.8 | V |  | 29 |+| Voltage on VDD with respect to GND |  | -0.3 |  | 4.2 | V |  | 29 |+| Maximum Total current through VDD and GND |  |  |  | 500 | mA |  | 29 |+| Maximum output current sunk by /RST or any Port pin |  |  |  | 100 | mA |  | 29 |+| Digital Supply Voltage | VRST | 3 |  | 3.6 | V |  | 30 |+| Digital Supply RAM Data Retention Voltage |  |  | 1.5 |  | V |  | 30 |+| SYSCLK (System Clock) |  | 0 |  | 25 | MHz |  | 30 |+| TSYSH (SYSCLK High Time) | TSYSH | 18 |  |  | ns |  | 30 |+| TSYSL (SYSCLK Low Time) | TSYSL | 18 |  |  | ns |  | 30 |+| Specified Operating Temperature Range |  | -40 |  | 85 | °C |  | 30 |+| Digital Supply Current - CPU Active, IDD | IDD |  | 12.3 | 13.6 | mA | VDD = 3.6 V; F = 25 MHz | 30 |+| Digital Supply Current - CPU Active, IDD | IDD |  | 10.6 | 11.5 | mA | VDD = 3.3 V, F = 24 MHz | 30 |+| Digital Supply Current - CPU Active, IDD | IDD |  | 9 | 9.8 | mA | VDD = 3.0 V, F = 24 MHz | 30 |+| Digital Supply Current - CPU Idle, Idle IDD | Idle IDD |  | 5.8 | 6.5 | mA | VDD = 3.6 V; F = 25 MHz | 30 |+| Digital Supply Current - CPU Idle, Idle IDD | Idle IDD |  | 5.2 | 5.9 | mA | VDD = 3.3 V, F = 24 MHz | 30 |+| Digital Supply Current - CPU Idle, Idle IDD | Idle IDD |  | 4.6 | 5.2 | mA | VDD = 3.0 V, F = 24 MHz | 30 |+| Input Voltage Range |  | 2.7 |  | 5.25 | V |  | 70 |+| Output Voltage (VDD) | VDD | 3 | 3.3 | 3.6 | V | Output Current = 1 to 100 mA | 70 |+| Output Current |  |  |  | 100 | mA |  | 70 |+| VBUS Detection Input Low Voltage |  |  |  | 1 | V |  | 70 |+| VBUS Detection Input High Voltage |  | 3 |  |  | V |  | 70 |+| Dropout Voltage (VDO) | VDO |  | 1 |  | mV/mA |  | 70 |+| Integral Nonlinearity |  | -1 |  | 1 | LSB |  | 56 |+| Differential Nonlinearity |  | -1 |  | 1 | LSB | Guaranteed Monotonic | 56 |+| Offset Error |  | -15 | 0 | 15 | LSB |  | 56 |+| Full Scale Error |  | -15 | -1 | 15 | LSB |  | 56 |+| Offset Temperature Coefficient |  |  | 10 |  | ppm/°C |  | 56 |+| Signal-to-Noise Plus Distortion | SNDR | 53 | 55.5 |  | dB | 10 kHz sine-wave Single-ended input, 1 dB below Full Scale, 200 ksps | 56 |+| Total Harmonic Distortion | THD |  | -67 |  | dB | Up to the 5th harmonic | 56 |+| Spurious-Free Dynamic Range | SFDR |  | 78 |  | dB |  | 56 |+| SAR Conversion Clock |  |  |  | 3 | MHz |  | 56 |+| Conversion Time in SAR Clocks |  | 10 |  |  | clocks |  | 56 |+| Track/Hold Acquisition Time |  | 300 |  |  | ns |  | 56 |+| Throughput Rate |  |  |  | 200 | ksps |  | 56 |+| Input Capacitance |  |  | 5 |  | pF |  | 56 |+| Temperature Sensor Linearity |  |  | 0.1 |  | °C |  | 56 |+| Temperature Sensor Gain |  |  | 2.86 |  | mV/°C |  | 56 |+| Temperature Sensor Offset |  | -8.5 | 0.776 | 8.5 | mV | Temp = 0 °C | 56 |+| Power Supply Current (VDD supplied to ADC0) |  |  | 400 | 900 | µA | Operating Mode, 200 ksps | 56 |+| Power Supply Rejection |  | -0.3 |  | 0.3 | mV/V |  | 56 |+| Output Voltage 25 °C ambient (Internal Reference) |  | 2.38 | 2.44 | 2.5 | V | 25 °C ambient | 58 |+| VREF Short-Circuit Current |  |  |  | 10 | mA |  | 58 |+| VREF Temperature Coefficient |  |  | 15 |  | ppm/°C |  | 58 |+| Load Regulation |  |  | 1.5 |  | ppm/µA | Load = 0 to 200 µA to GND | 58 |+| VREF Turn-on Time 1 |  |  |  | 2 | ms | 4.7 µF tantalum, 0.1 µF ceramic bypass | 58 |+| VREF Turn-on Time 2 |  |  |  | 20 | µs | 0.1 µF ceramic bypass | 58 |+| VREF Turn-on Time 3 |  |  |  | 10 | µs | no bypass cap | 58 |+| Power Supply Rejection (VREF) |  |  | 140 |  | ppm/V |  | 58 |+| Input Current |  |  | 12 |  | µA | Sample Rate = 200 ksps; VREF = 3.0 V | 58 |+| Response Time Mode 0 |  |  | 100 |  | ns | Mode 0, Vcm* = 1.5 V; CP0+, CP0- = 100 mV | 68 |+| Response Time Mode 0 |  |  | 250 |  | ns | Mode 0, Vcm* = 1.5 V; CP0+, CP0- = -100 mV | 68 |+| Response Time Mode 3 |  |  | 1050 |  | ns | Mode 3, Vcm* = 1.5 V; CP0+, CP0- = 100 mV | 68 |+| Response Time Mode 3 |  |  | 5200 |  | ns | Mode 3, Vcm* = 1.5 V; CP0+, CP0- = -100 mV | 68 |+| Common-Mode Rejection Ratio | CMRR |  | 1.5 | 4 | mV/V |  | 68 |+| Positive Hysteresis 4 |  | 15 | 20 | 30 | mV | CP0HYP1-0 = 11 | 68 |+| Negative Hysteresis 4 |  | 15 | 20 | 30 | mV | CP0HYN1-0 = 11 | 68 |+| Inverting or Non-Inverting Input Voltage Range |  | -0.25 |  |  | V |  | 68 |+| Input Capacitance (Comparator) |  |  | 3 |  | pF |  | 68 |+| Input Offset Voltage |  | -5 |  | 5 | mV |  | 68 |+| Power-up Time |  |  | 10 |  | µs |  | 68 |+| Supply Current at DC Mode 0 |  |  | 7.6 | 20 | µA | Mode 0 | 68 |+| Supply Current at DC Mode 3 |  |  | 0.4 | 2.5 | µA | Mode 3 | 68 |+| /RST Output Low Voltage |  |  |  | 0.6 | V | IOL = 8.5 mA, VDD = 2.7 V to 3.6 V | 107 |+| VDD POR Threshold | VRST | 2.4 | 2.55 | 2.7 | V |  | 107 |+| Missing Clock Detector Timeout |  | 100 | 220 | 500 | µs | Time from last system clock rising edge to reset initiation | 107 |+| Minimum /RST Low Time to Generate a System Reset |  | 15 |  |  | µs |  | 107 |+| Flash Size |  |  | 16384 |  | bytes |  | 110 |+| Erase Cycle Time |  | 10 | 15 | 20 | ms | 25 MHz System Clock | 110 |+| Write Cycle Time |  | 40 | 55 | 70 | µs | 25 MHz System Clock | 110 |+| Internal Oscillator Frequency |  | 11.82 | 12 | 12.18 | MHz | Reset Frequency | 128 |+| USB Clock Frequency |  | 47.88 | 48 | 48.12 | MHz | Full Speed Mode; applies only to external oscillator sources | 128 |+| USB Clock Frequency |  | 5.91 | 6 | 6.09 | MHz | Low Speed Mode; applies only to external oscillator sources | 128 |+| Output Low Voltage |  |  |  | 1 | V | IOL = 8.5 mA, Port I/O push-pull | 141 |+| Output Low Voltage |  |  |  | 0.6 | V | IOL = 10 µA, Port I/O push-pull | 141 |+| Output Low Voltage |  |  |  | 0.1 | V | IOL = 25 mA, Port I/O push-pull | 141 |+| Input High Voltage |  | 2 |  |  | V |  | 141 |+| Input Low Voltage |  |  |  | 0.8 | V |  | 141 |+| Output High Voltage | VOH | 2.8 |  |  | V |  | 172 |+| Output Low Voltage | VOL |  |  | 0.8 | V |  | 172 |+| Pull-up Resistance Full Speed (D+ Pull-up) | RPU | 1.425 | 1.5 | 1.575 | kΩ | Full Speed | 172 |+| Pull-up Resistance Low Speed (D- Pull-up) | RPU | 1.425 | 1.5 | 1.575 | kΩ | Low Speed | 172 |+| Output Rise Time | TR | 75 |  | 300 | ns | Low Speed | 172 |+| Output Rise Time | TR | 4 |  | 20 | ns | Full Speed | 172 |+| Output Fall Time | TF | 75 |  | 300 | ns | Low Speed | 172 |+| Output Fall Time | TF | 4 |  | 20 | ns | Full Speed | 172 |+| Differential Input Sensitivity | VDI | 0.2 |  |  | V | /(D+), (D-)/ | 172 |+| Differential Input Common Mode Range | VCM | 0.8 |  | 2.5 | V |  | 172 |+| Input Leakage Current | IL |  |  | 1 | µA | Pullups Disabled | 172 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| housing | PC |  | 4. Recommended card reflow profile is per the JEDEC/IPC J-STD￾020 specification for Small Body Components. | 36 |++## CAD (KiCad official)++- Symbol: `C8051F321-GMR`+- Footprint: `Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm`+- 3D model: QFN-28-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `c8051f321-gmr-etched.step` / `c8051f321-gmr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `c8051f321-gmr.step` / `c8051f321-gmr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [SILICON LABS datasheet](docs/c8051f321-gmr-datasheet.pdf) (254 pp, sha256 `46143e2ba725954a`, retrieved 2026-10-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/c8051f321-gmr-datasheet.pdf)

@@ -0,0 +1,713 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "C8051F321-GMR",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 29,+      "span_mm": 8.25,+      "dash_mm": 0.2062,+      "gap_mm": 0.1238,+      "pad_stroke_mm": 0.0495+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 28,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.456,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -2.5,+      2.5,+      -2.5,+      2.5+    ],+    "pads_bbox_mm": [+      -2.85,+      2.85,+      -2.85,+      2.85+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "c8051f321-gmr-etched.glb",+    "glb_sha256": "24d07ee4c6a847dd6de362990fcf7396d378ac1b56e2507d8b88773174371157",+    "footprint": "c8051f321-gmr.kicad_mod",+    "footprint_sha256": "8eaa174af926029da38bed4bb85f2bea39511961dcc3dd5a1c3bb963c38c51a2",+    "pins": "page.json component.pins",+    "pins_sha256": "9730e79adf2a192d8b05555fa5c3660f8aad21cb544bd31bbee0a4dd62e17c5e"+  },+  "generator": "adom-wiki 1.8.0 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "P0.1",+      "x": -3.54,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "P0.0",+      "x": -2.95,+      "y": -1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "GND",+      "x": -2.95,+      "y": -0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "D+",+      "x": -2.95,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "D-",+      "x": -2.95,+      "y": 0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "VDD",+      "x": -2.95,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "REGIN",+      "x": -2.95,+      "y": 1.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "VBUS",+      "x": -1.5,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "/RST/C2CK",+      "x": -1.0,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "P3.0/C2D",+      "x": -0.5,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "P2.3",+      "x": 0.0,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "P2.2",+      "x": 0.5,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "P2.1",+      "x": 1.0,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "P2.0",+      "x": 1.5,+      "y": 2.95,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "P1.7",+      "x": 2.95,+      "y": 1.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "P1.6",+      "x": 2.95,+      "y": 1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "P1.5",+      "x": 2.95,+      "y": 0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "P1.4",+      "x": 2.95,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "P1.3",+      "x": 2.95,+      "y": -0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "P1.2",+      "x": 2.95,+      "y": -1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "P1.1",+      "x": 2.95,+      "y": -1.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "P1.0",+      "x": 1.5,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "P0.7/VREF",+      "x": 1.0,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "P0.6/CNVSTR",+      "x": 0.5,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "P0.5",+      "x": 0.0,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "P0.4",+      "x": -0.5,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "P0.3/XTAL2",+      "x": -1.0,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "P0.2/XTAL1",+      "x": -1.5,+      "y": -2.95,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        -1.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        -1.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        -0.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        0.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        0.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        1.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.45,+        1.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -1.5,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        1.5,+        2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        1.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        1.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        0.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        0.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        -0.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        -1.0+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        2.45,+        -1.5+      ],+      "size_mm": [+        0.8,+        0.25+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        1.5,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        -1.5,+        -2.45+      ],+      "size_mm": [+        0.25,+        0.8+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "rect",+      "center_mm": [+        0.0,+        0.0+      ],+      "size_mm": [+        3.35,+        3.35+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,397 @@+(footprint "QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=283)")+	(tags "QFN NoLead")+	(property "Reference" "REF**"+		(at 0 -3.8 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm"+		(at 0 3.8 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/no_lead"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -2.61 -2.61)+		(end -1.885 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -2.61 -1.885)+		(end -2.61 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -2.61 2.61)+		(end -2.61 1.885)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -1.885 2.61)+		(end -2.61 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 1.885 -2.61)+		(end 2.61 -2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 -2.61)+		(end 2.61 -1.885)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 1.885)+		(end 2.61 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 2.61 2.61)+		(end 1.885 2.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -3.11 -1.5)+			(xy -3.44 -1.26)+			(xy -3.44 -1.74)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -1.5 -2.5)+			(xy 2.5 -2.5)+			(xy 2.5 2.5)+			(xy -2.5 2.5)+			(xy -2.5 -1.5)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "" smd roundrect+		(at -1.12 -1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at -1.12 0)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at -1.12 1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 -1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 0)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 0 1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.12 -1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.12 0)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "" smd roundrect+		(at 1.12 1.12)+		(size 0.9 0.9)+		(layers "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "1" smd roundrect+		(at -2.45 -1.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -2.45 -1)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -2.45 -0.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -2.45 0)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -2.45 0.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -2.45 1)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -2.45 1.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -1.5 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -1 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -0.5 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at 0 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at 0.5 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 1 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 1.5 2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 2.45 1.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 2.45 1)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 2.45 0.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 2.45 0)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 2.45 -0.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 2.45 -1)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "21" smd roundrect+		(at 2.45 -1.5)+		(size 0.8 0.25)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "22" smd roundrect+		(at 1.5 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "23" smd roundrect+		(at 1 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "24" smd roundrect+		(at 0.5 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "25" smd roundrect+		(at 0 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "26" smd roundrect+		(at -0.5 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "27" smd roundrect+		(at -1 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "28" smd roundrect+		(at -1.5 -2.45)+		(size 0.25 0.8)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "29" smd rect+		(at 0 0)+		(size 3.35 3.35)+		(property pad_prop_heatsink)+		(layers "F.Cu" "F.Mask")+		(zone_connect 2)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -3.10 -1.88) (xy -2.75 -1.88) (xy -2.75 -2.75) (xy -1.88 -2.75) (xy -1.88 -3.10) (xy 1.88 -3.10) (xy 1.88 -2.75) (xy 2.75 -2.75) (xy 2.75 -1.88) (xy 3.10 -1.88) (xy 3.10 1.88) (xy 2.75 1.88) (xy 2.75 2.75) (xy 1.88 2.75) (xy 1.88 3.10) (xy -1.88 3.10) (xy -1.88 2.75) (xy -2.75 2.75) (xy -2.75 1.88) (xy -3.10 1.88))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,129 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "C8051F321-GMR" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 22.86 0) (effects (font (size 1.27 1.27))))+    (property "Value" "C8051F321-GMR" (at 0 -22.86 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "C8051F321-GMR_0_1"+    (rectangle (start -12.70 20.32) (end 12.70 -20.32)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "C8051F321-GMR_1_1"+    (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+      (name "P0.1" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+      (name "P0.0" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 12.70 0) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+      (name "D+" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+      (name "D-" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 5.08 0) (length 5.08)+      (name "VDD" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 2.54 0) (length 5.08)+      (name "REGIN" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 0.00 0) (length 5.08)+      (name "VBUS" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+      (name "/RST/C2CK" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+      (name "P3.0/C2D" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "P2.3" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+      (name "P2.2" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+      (name "P2.1" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+      (name "P2.0" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+      (name "P1.7" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at 17.78 15.24 180) (length 5.08)+      (name "EP" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+      (name "P0.2/XTAL1" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+      (name "P0.3/XTAL2" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+      (name "P0.4" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "P0.5" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "P0.6/CNVSTR" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+      (name "P0.7/VREF" (effects (font (size 1.27 1.27))))+      (number "23" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "P1.0" (effects (font (size 1.27 1.27))))+      (number "22" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "P1.1" (effects (font (size 1.27 1.27))))+      (number "21" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "P1.2" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "P1.3" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+      (name "P1.4" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+      (name "P1.5" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)+      (name "P1.6" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,195 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm">+  <description>QFN-28-1EP, 5 x 5 mm, 0.5 mm pitch</description>+  <smd name="1" x="-2.4500" y="1.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="2" x="-2.4500" y="1.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="3" x="-2.4500" y="0.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="4" x="-2.4500" y="-0.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="5" x="-2.4500" y="-0.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="6" x="-2.4500" y="-1.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="7" x="-2.4500" y="-1.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="8" x="-1.5000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="9" x="-1.0000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="10" x="-0.5000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="11" x="0.0000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="12" x="0.5000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="13" x="1.0000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="14" x="1.5000" y="-2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="15" x="2.4500" y="-1.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="16" x="2.4500" y="-1.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="17" x="2.4500" y="-0.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="18" x="2.4500" y="-0.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="19" x="2.4500" y="0.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="20" x="2.4500" y="1.0000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="21" x="2.4500" y="1.5000" dx="0.8000" dy="0.2500" layer="1" roundness="50"/>+  <smd name="22" x="1.5000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="23" x="1.0000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="24" x="0.5000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="25" x="0.0000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="26" x="-0.5000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="27" x="-1.0000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="28" x="-1.5000" y="2.4500" dx="0.2500" dy="0.8000" layer="1" roundness="50"/>+  <smd name="29" x="0.0000" y="-0.0000" dx="3.3500" dy="3.3500" layer="1" cream="no"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-3.1100" y="1.5000"/>+    <vertex x="-3.4400" y="1.2600"/>+    <vertex x="-3.4400" y="1.7400"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-1.5000" y="2.5000"/>+    <vertex x="2.5000" y="2.5000"/>+    <vertex x="2.5000" y="-2.5000"/>+    <vertex x="-2.5000" y="-2.5000"/>+    <vertex x="-2.5000" y="1.5000"/>+  </polygon>+  <wire x1="-2.6100" y1="2.6100" x2="-1.8850" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="-2.6100" y1="1.8850" x2="-2.6100" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="-2.6100" y1="-2.6100" x2="-2.6100" y2="-1.8850" width="0.1200" layer="21"/>+  <wire x1="-1.8850" y1="-2.6100" x2="-2.6100" y2="-2.6100" width="0.1200" layer="21"/>+  <wire x1="1.8850" y1="2.6100" x2="2.6100" y2="2.6100" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="2.6100" x2="2.6100" y2="1.8850" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="-1.8850" x2="2.6100" y2="-2.6100" width="0.1200" layer="21"/>+  <wire x1="2.6100" y1="-2.6100" x2="1.8850" y2="-2.6100" width="0.1200" layer="21"/>+  <text x="0" y="3.450" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-3.450" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="C8051F321-GMR">+  <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>+  <wire x1="12.7" y1="20.32" x2="12.7" y2="-20.32" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-20.32" x2="-12.7" y2="-20.32" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-20.32" x2="-12.7" y2="20.32" width="0.254" layer="94"/>+  <text x="0.0000" y="22.8600" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-22.8600" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="P0.1" x="-17.78" y="17.78" length="middle" direction="io"/>+  <pin name="P0.0" x="-17.78" y="15.24" length="middle" direction="io"/>+  <pin name="GND" x="-17.78" y="12.7" length="middle" direction="pwr"/>+  <pin name="D+" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="D-" x="-17.78" y="7.62" length="middle" direction="io"/>+  <pin name="VDD" x="-17.78" y="5.08" length="middle" direction="pwr"/>+  <pin name="REGIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>+  <pin name="VBUS" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="/RST/C2CK" x="-17.78" y="-2.54" length="middle" direction="io"/>+  <pin name="P3.0/C2D" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="P2.3" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="P2.2" x="-17.78" y="-10.16" length="middle" direction="io"/>+  <pin name="P2.1" x="-17.78" y="-12.7" length="middle" direction="io"/>+  <pin name="P2.0" x="-17.78" y="-15.24" length="middle" direction="io"/>+  <pin name="P1.7" x="-17.78" y="-17.78" length="middle" direction="io"/>+  <pin name="EP" x="17.78" y="15.24" length="middle" direction="pas" rot="R180"/>+  <pin name="P0.2/XTAL1" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="P0.3/XTAL2" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+  <pin name="P0.4" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="P0.5" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="P0.6/CNVSTR" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="P0.7/VREF" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="P1.0" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="P1.1" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="P1.2" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="P1.3" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="P1.4" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+  <pin name="P1.5" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+  <pin name="P1.6" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="C8051F321-GMR" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="C8051F321-GMR" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm">+      <connects>+        <connect gate="G$1" pin="P0.1" pad="1"/>+        <connect gate="G$1" pin="P0.0" pad="2"/>+        <connect gate="G$1" pin="GND" pad="3"/>+        <connect gate="G$1" pin="D+" pad="4"/>+        <connect gate="G$1" pin="D-" pad="5"/>+        <connect gate="G$1" pin="VDD" pad="6"/>+        <connect gate="G$1" pin="REGIN" pad="7"/>+        <connect gate="G$1" pin="VBUS" pad="8"/>+        <connect gate="G$1" pin="/RST/C2CK" pad="9"/>+        <connect gate="G$1" pin="P3.0/C2D" pad="10"/>+        <connect gate="G$1" pin="P2.3" pad="11"/>+        <connect gate="G$1" pin="P2.2" pad="12"/>+        <connect gate="G$1" pin="P2.1" pad="13"/>+        <connect gate="G$1" pin="P2.0" pad="14"/>+        <connect gate="G$1" pin="P1.7" pad="15"/>+        <connect gate="G$1" pin="EP" pad="29"/>+        <connect gate="G$1" pin="P0.2/XTAL1" pad="28"/>+        <connect gate="G$1" pin="P0.3/XTAL2" pad="27"/>+        <connect gate="G$1" pin="P0.4" pad="26"/>+        <connect gate="G$1" pin="P0.5" pad="25"/>+        <connect gate="G$1" pin="P0.6/CNVSTR" pad="24"/>+        <connect gate="G$1" pin="P0.7/VREF" pad="23"/>+        <connect gate="G$1" pin="P1.0" pad="22"/>+        <connect gate="G$1" pin="P1.1" pad="21"/>+        <connect gate="G$1" pin="P1.2" pad="20"/>+        <connect gate="G$1" pin="P1.3" pad="19"/>+        <connect gate="G$1" pin="P1.4" pad="18"/>+        <connect gate="G$1" pin="P1.5" pad="17"/>+        <connect gate="G$1" pin="P1.6" pad="16"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,7381 @@+ISO-10303-21;
+HEADER;
+/* QFN-28-1EP_5x5mm_Pitch0.5mm.step 3D STEP model for use in ECAD systems
+ * Copyright (C) 2017, kicad StepUp
+ * 
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see http://www.gnu.org/licenses/.
+ * 
+ * As a special exception, if you create a design which uses this symbol,
+ * and embed this symbol or unaltered portions of this symbol into the design,
+ * this symbol does not by itself cause the resulting design to be covered by
+ * the GNU General Public License.
+ * This exception does not however invalidate any other reasons why the design
+ * itself might be covered by the GNU General Public License. 
+ * If you modify this symbol, you may extend this exception to your version of the symbol,
+ * but you are not obligated to do so.
+ * If you do not wish to do so, delete this exception statement from your version
+ * Risk disclaimer
+ * *USE 3D CAD DATA AT YOUR OWN RISK*
+ * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.*
+ * 
+ */
+
+FILE_DESCRIPTION(
+/* description */ ('model of QFN-28-1EP_5x5mm_Pitch0.5mm'),
+/* implementation_level */ '2;1');
+
+FILE_NAME(
+/* name */ 'QFN-28-1EP_5x5mm_Pitch0.5mm.step',
+/* time_stamp */ '2017-03-23T11:15:40',
+/* author */ ('kicad StepUp','ksu'),
+/* organization */ ('FreeCAD'),
+/* preprocessor_version */ 'OCC',
+/* originating_system */ 'kicad StepUp',
+/* authorisation */ '');
+
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('QFN-28-1EP_5x5mm_Pitch0.5mm','QFN-28-1EP_5x5mm_Pitch0.5mm'
+,'',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#5985);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#58,#105,#130,#170,#187,#1169,#1347,#1359,
+#1544,#1584,#1624,#1649,#1674,#1707,#1740,#1780,#1805,#1838,#1878,
+#1918,#1943,#1968,#2001,#2034,#2074,#2114,#2139,#2164,#2197,#2230,
+#2270,#2310,#2335,#2360,#2393,#2426,#2466,#2506,#2531,#2556,#2589,
+#2622,#2662,#2702,#2727,#2752,#2785,#2818,#3003,#3181,#3221,#3261,
+#3286,#3311,#3344,#3377,#3417,#3457,#3482,#3507,#3540,#3573,#3613,
+#3653,#3678,#3703,#3736,#3769,#3809,#3849,#3874,#3899,#3932,#3965,
+#4005,#4045,#4070,#4095,#4128,#4161,#4201,#4241,#4266,#4291,#4324,
+#4357,#4397,#4437,#4462,#4487,#4520,#4553,#4584,#4608,#4632,#4656,
+#4673,#4696,#4713,#4730,#4747,#4764,#4781,#4798,#4815,#4832,#4849,
+#4866,#4883,#4900,#4917,#4934,#4946,#4963,#4975,#4992,#5004,#5021,
+#5033,#5050,#5062,#5079,#5091,#5108,#5120,#5137,#5149,#5166,#5178,
+#5195,#5207,#5224,#5236,#5253,#5265,#5282,#5294,#5311,#5328,#5345,
+#5362,#5379,#5396,#5413,#5430,#5447,#5464,#5481,#5498,#5515,#5532,
+#5549,#5561,#5578,#5590,#5607,#5619,#5636,#5648,#5665,#5677,#5694,
+#5706,#5723,#5735,#5752,#5764,#5781,#5793,#5810,#5822,#5839,#5851,
+#5868,#5880,#5897,#5909,#5926,#5938,#5951,#5976));
+#17 = ADVANCED_FACE('',(#18),#53,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#30,#39,#47));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-2.225,0.875,0.E+000));
+#26 = LINE('',#27,#28);
+#27 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000));
+#28 = VECTOR('',#29,1.);
+#29 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#30 = ORIENTED_EDGE('',*,*,#31,.T.);
+#31 = EDGE_CURVE('',#24,#32,#34,.T.);
+#32 = VERTEX_POINT('',#33);
+#33 = CARTESIAN_POINT('',(-2.225,1.125,0.E+000));
+#34 = CIRCLE('',#35,0.125);
+#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38);
+#36 = CARTESIAN_POINT('',(-2.225,1.,0.E+000));
+#37 = DIRECTION('',(0.E+000,0.E+000,1.));
+#38 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#39 = ORIENTED_EDGE('',*,*,#40,.T.);
+#40 = EDGE_CURVE('',#32,#41,#43,.T.);
+#41 = VERTEX_POINT('',#42);
+#42 = CARTESIAN_POINT('',(-2.5,1.125,0.E+000));
+#43 = LINE('',#44,#45);
+#44 = CARTESIAN_POINT('',(-2.225,1.125,0.E+000));
+#45 = VECTOR('',#46,1.);
+#46 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#47 = ORIENTED_EDGE('',*,*,#48,.T.);
+#48 = EDGE_CURVE('',#41,#22,#49,.T.);
+#49 = LINE('',#50,#51);
+#50 = CARTESIAN_POINT('',(-2.5,1.125,0.E+000));
+#51 = VECTOR('',#52,1.);
+#52 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#53 = PLANE('',#54);
+#54 = AXIS2_PLACEMENT_3D('',#55,#56,#57);
+#55 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000));
+#56 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#57 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#58 = ADVANCED_FACE('',(#59),#100,.F.);
+#59 = FACE_BOUND('',#60,.F.);
+#60 = EDGE_LOOP('',(#61,#62,#70,#78,#86,#94));
+#61 = ORIENTED_EDGE('',*,*,#21,.F.);
+#62 = ORIENTED_EDGE('',*,*,#63,.T.);
+#63 = EDGE_CURVE('',#22,#64,#66,.T.);
+#64 = VERTEX_POINT('',#65);
+#65 = CARTESIAN_POINT('',(-2.5,0.875,0.2));
+#66 = LINE('',#67,#68);
+#67 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000));
+#68 = VECTOR('',#69,1.);
+#69 = DIRECTION('',(0.E+000,0.E+000,1.));
+#70 = ORIENTED_EDGE('',*,*,#71,.T.);
+#71 = EDGE_CURVE('',#64,#72,#74,.T.);
+#72 = VERTEX_POINT('',#73);
+#73 = CARTESIAN_POINT('',(-2.49,0.875,0.2));
+#74 = LINE('',#75,#76);
+#75 = CARTESIAN_POINT('',(-2.5,0.875,0.2));
+#76 = VECTOR('',#77,1.);
+#77 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#78 = ORIENTED_EDGE('',*,*,#79,.F.);
+#79 = EDGE_CURVE('',#80,#72,#82,.T.);
+#80 = VERTEX_POINT('',#81);
+#81 = CARTESIAN_POINT('',(-2.49,0.875,2.E-002));
+#82 = LINE('',#83,#84);
+#83 = CARTESIAN_POINT('',(-2.49,0.875,1.E-002));
+#84 = VECTOR('',#85,1.);
+#85 = DIRECTION('',(0.E+000,0.E+000,1.));
+#86 = ORIENTED_EDGE('',*,*,#87,.F.);
+#87 = EDGE_CURVE('',#88,#80,#90,.T.);
+#88 = VERTEX_POINT('',#89);
+#89 = CARTESIAN_POINT('',(-2.225,0.875,2.E-002));
+#90 = LINE('',#91,#92);
+#91 = CARTESIAN_POINT('',(-2.495,0.875,2.E-002));
+#92 = VECTOR('',#93,1.);
+#93 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#94 = ORIENTED_EDGE('',*,*,#95,.F.);
+#95 = EDGE_CURVE('',#24,#88,#96,.T.);
+#96 = LINE('',#97,#98);
+#97 = CARTESIAN_POINT('',(-2.225,0.875,0.E+000));
+#98 = VECTOR('',#99,1.);
+#99 = DIRECTION('',(0.E+000,0.E+000,1.));
+#100 = PLANE('',#101);
+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);
+#102 = CARTESIAN_POINT('',(-2.5,0.875,0.E+000));
+#103 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#104 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#105 = ADVANCED_FACE('',(#106),#125,.T.);
+#106 = FACE_BOUND('',#107,.F.);
+#107 = EDGE_LOOP('',(#108,#109,#110,#119));
+#108 = ORIENTED_EDGE('',*,*,#31,.F.);
+#109 = ORIENTED_EDGE('',*,*,#95,.T.);
+#110 = ORIENTED_EDGE('',*,*,#111,.F.);
+#111 = EDGE_CURVE('',#112,#88,#114,.T.);
+#112 = VERTEX_POINT('',#113);
+#113 = CARTESIAN_POINT('',(-2.225,1.125,2.E-002));
+#114 = CIRCLE('',#115,0.125);
+#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118);
+#116 = CARTESIAN_POINT('',(-2.225,1.,2.E-002));
+#117 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#118 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#119 = ORIENTED_EDGE('',*,*,#120,.F.);
+#120 = EDGE_CURVE('',#32,#112,#121,.T.);
+#121 = LINE('',#122,#123);
+#122 = CARTESIAN_POINT('',(-2.225,1.125,0.E+000));
+#123 = VECTOR('',#124,1.);
+#124 = DIRECTION('',(0.E+000,0.E+000,1.));
+#125 = CYLINDRICAL_SURFACE('',#126,0.125);
+#126 = AXIS2_PLACEMENT_3D('',#127,#128,#129);
+#127 = CARTESIAN_POINT('',(-2.225,1.,0.E+000));
+#128 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#129 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#130 = ADVANCED_FACE('',(#131),#165,.F.);
+#131 = FACE_BOUND('',#132,.F.);
+#132 = EDGE_LOOP('',(#133,#134,#135,#143,#151,#159));
+#133 = ORIENTED_EDGE('',*,*,#40,.F.);
+#134 = ORIENTED_EDGE('',*,*,#120,.T.);
+#135 = ORIENTED_EDGE('',*,*,#136,.F.);
+#136 = EDGE_CURVE('',#137,#112,#139,.T.);
+#137 = VERTEX_POINT('',#138);
+#138 = CARTESIAN_POINT('',(-2.49,1.125,2.E-002));
+#139 = LINE('',#140,#141);
+#140 = CARTESIAN_POINT('',(-2.3575,1.125,2.E-002));
+#141 = VECTOR('',#142,1.);
+#142 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#143 = ORIENTED_EDGE('',*,*,#144,.F.);
+#144 = EDGE_CURVE('',#145,#137,#147,.T.);
+#145 = VERTEX_POINT('',#146);
+#146 = CARTESIAN_POINT('',(-2.49,1.125,0.2));
+#147 = LINE('',#148,#149);
+#148 = CARTESIAN_POINT('',(-2.49,1.125,1.E-002));
+#149 = VECTOR('',#150,1.);
+#150 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#151 = ORIENTED_EDGE('',*,*,#152,.T.);
+#152 = EDGE_CURVE('',#145,#153,#155,.T.);
+#153 = VERTEX_POINT('',#154);
+#154 = CARTESIAN_POINT('',(-2.5,1.125,0.2));
+#155 = LINE('',#156,#157);
+#156 = CARTESIAN_POINT('',(-2.225,1.125,0.2));
+#157 = VECTOR('',#158,1.);
+#158 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#159 = ORIENTED_EDGE('',*,*,#160,.F.);
+#160 = EDGE_CURVE('',#41,#153,#161,.T.);
+#161 = LINE('',#162,#163);
+#162 = CARTESIAN_POINT('',(-2.5,1.125,0.E+000));
+#163 = VECTOR('',#164,1.);
+#164 = DIRECTION('',(0.E+000,0.E+000,1.));
+#165 = PLANE('',#166);
+#166 = AXIS2_PLACEMENT_3D('',#167,#168,#169);
+#167 = CARTESIAN_POINT('',(-2.225,1.125,0.E+000));
+#168 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#169 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#170 = ADVANCED_FACE('',(#171),#182,.F.);
+#171 = FACE_BOUND('',#172,.F.);
+#172 = EDGE_LOOP('',(#173,#174,#180,#181));
+#173 = ORIENTED_EDGE('',*,*,#160,.T.);
+#174 = ORIENTED_EDGE('',*,*,#175,.T.);
+#175 = EDGE_CURVE('',#153,#64,#176,.T.);
+#176 = LINE('',#177,#178);
+#177 = CARTESIAN_POINT('',(-2.5,1.125,0.2));
+#178 = VECTOR('',#179,1.);
+#179 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#180 = ORIENTED_EDGE('',*,*,#63,.F.);
+#181 = ORIENTED_EDGE('',*,*,#48,.F.);
+#182 = PLANE('',#183);
+#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186);
+#184 = CARTESIAN_POINT('',(-2.5,1.125,0.E+000));
+#185 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#186 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#187 = ADVANCED_FACE('',(#188,#1122),#1164,.F.);
+#188 = FACE_BOUND('',#189,.F.);
+#189 = EDGE_LOOP('',(#190,#200,#208,#216,#225,#233,#239,#240,#241,#242,
+#250,#258,#267,#275,#283,#291,#300,#308,#316,#324,#333,#341,#349,
+#357,#366,#374,#382,#390,#399,#407,#415,#423,#431,#440,#448,#456,
+#464,#473,#481,#489,#497,#506,#514,#522,#530,#539,#547,#555,#563,
+#572,#580,#588,#596,#605,#613,#621,#629,#638,#646,#654,#662,#670,
+#679,#687,#695,#703,#712,#720,#728,#736,#745,#753,#761,#769,#778,
+#786,#794,#802,#811,#819,#827,#835,#844,#852,#860,#868,#877,#885,
+#893,#901,#909,#918,#926,#934,#942,#951,#959,#967,#975,#984,#992,
+#1000,#1008,#1017,#1025,#1033,#1041,#1050,#1058,#1066,#1074,#1083,
+#1091,#1099,#1107,#1116));
+#190 = ORIENTED_EDGE('',*,*,#191,.F.);
+#191 = EDGE_CURVE('',#192,#194,#196,.T.);
+#192 = VERTEX_POINT('',#193);
+#193 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#194 = VERTEX_POINT('',#195);
+#195 = CARTESIAN_POINT('',(-1.625,2.49,2.E-002));
+#196 = LINE('',#197,#198);
+#197 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#198 = VECTOR('',#199,1.);
+#199 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#200 = ORIENTED_EDGE('',*,*,#201,.T.);
+#201 = EDGE_CURVE('',#192,#202,#204,.T.);
+#202 = VERTEX_POINT('',#203);
+#203 = CARTESIAN_POINT('',(-2.49,1.625,2.E-002));
+#204 = LINE('',#205,#206);
+#205 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#206 = VECTOR('',#207,1.);
+#207 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#208 = ORIENTED_EDGE('',*,*,#209,.T.);
+#209 = EDGE_CURVE('',#202,#210,#212,.T.);
+#210 = VERTEX_POINT('',#211);
+#211 = CARTESIAN_POINT('',(-2.225,1.625,2.E-002));
+#212 = LINE('',#213,#214);
+#213 = CARTESIAN_POINT('',(-2.3575,1.625,2.E-002));
+#214 = VECTOR('',#215,1.);
+#215 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#216 = ORIENTED_EDGE('',*,*,#217,.T.);
+#217 = EDGE_CURVE('',#210,#218,#220,.T.);
+#218 = VERTEX_POINT('',#219);
+#219 = CARTESIAN_POINT('',(-2.225,1.375,2.E-002));
+#220 = CIRCLE('',#221,0.125);
+#221 = AXIS2_PLACEMENT_3D('',#222,#223,#224);
+#222 = CARTESIAN_POINT('',(-2.225,1.5,2.E-002));
+#223 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#224 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#225 = ORIENTED_EDGE('',*,*,#226,.T.);
+#226 = EDGE_CURVE('',#218,#227,#229,.T.);
+#227 = VERTEX_POINT('',#228);
+#228 = CARTESIAN_POINT('',(-2.49,1.375,2.E-002));
+#229 = LINE('',#230,#231);
+#230 = CARTESIAN_POINT('',(-2.495,1.375,2.E-002));
+#231 = VECTOR('',#232,1.);
+#232 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#233 = ORIENTED_EDGE('',*,*,#234,.T.);
+#234 = EDGE_CURVE('',#227,#137,#235,.T.);
+#235 = LINE('',#236,#237);
+#236 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#237 = VECTOR('',#238,1.);
+#238 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#239 = ORIENTED_EDGE('',*,*,#136,.T.);
+#240 = ORIENTED_EDGE('',*,*,#111,.T.);
+#241 = ORIENTED_EDGE('',*,*,#87,.T.);
+#242 = ORIENTED_EDGE('',*,*,#243,.T.);
+#243 = EDGE_CURVE('',#80,#244,#246,.T.);
+#244 = VERTEX_POINT('',#245);
+#245 = CARTESIAN_POINT('',(-2.49,0.625,2.E-002));
+#246 = LINE('',#247,#248);
+#247 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#248 = VECTOR('',#249,1.);
+#249 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#250 = ORIENTED_EDGE('',*,*,#251,.T.);
+#251 = EDGE_CURVE('',#244,#252,#254,.T.);
+#252 = VERTEX_POINT('',#253);
+#253 = CARTESIAN_POINT('',(-2.225,0.625,2.E-002));
+#254 = LINE('',#255,#256);
+#255 = CARTESIAN_POINT('',(-2.3575,0.625,2.E-002));
+#256 = VECTOR('',#257,1.);
+#257 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#258 = ORIENTED_EDGE('',*,*,#259,.T.);
+#259 = EDGE_CURVE('',#252,#260,#262,.T.);
+#260 = VERTEX_POINT('',#261);
+#261 = CARTESIAN_POINT('',(-2.225,0.375,2.E-002));
+#262 = CIRCLE('',#263,0.125);
+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);
+#264 = CARTESIAN_POINT('',(-2.225,0.5,2.E-002));
+#265 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#266 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#267 = ORIENTED_EDGE('',*,*,#268,.T.);
+#268 = EDGE_CURVE('',#260,#269,#271,.T.);
+#269 = VERTEX_POINT('',#270);
+#270 = CARTESIAN_POINT('',(-2.49,0.375,2.E-002));
+#271 = LINE('',#272,#273);
+#272 = CARTESIAN_POINT('',(-2.495,0.375,2.E-002));
+#273 = VECTOR('',#274,1.);
+#274 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#275 = ORIENTED_EDGE('',*,*,#276,.T.);
+#276 = EDGE_CURVE('',#269,#277,#279,.T.);
+#277 = VERTEX_POINT('',#278);
+#278 = CARTESIAN_POINT('',(-2.49,0.125,2.E-002));
+#279 = LINE('',#280,#281);
+#280 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#281 = VECTOR('',#282,1.);
+#282 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#283 = ORIENTED_EDGE('',*,*,#284,.T.);
+#284 = EDGE_CURVE('',#277,#285,#287,.T.);
+#285 = VERTEX_POINT('',#286);
+#286 = CARTESIAN_POINT('',(-2.225,0.125,2.E-002));
+#287 = LINE('',#288,#289);
+#288 = CARTESIAN_POINT('',(-2.3575,0.125,2.E-002));
+#289 = VECTOR('',#290,1.);
+#290 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#291 = ORIENTED_EDGE('',*,*,#292,.T.);
+#292 = EDGE_CURVE('',#285,#293,#295,.T.);
+#293 = VERTEX_POINT('',#294);
+#294 = CARTESIAN_POINT('',(-2.225,-0.125,2.E-002));
+#295 = CIRCLE('',#296,0.125);
+#296 = AXIS2_PLACEMENT_3D('',#297,#298,#299);
+#297 = CARTESIAN_POINT('',(-2.225,7.716050021145E-016,2.E-002));
+#298 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#299 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#300 = ORIENTED_EDGE('',*,*,#301,.T.);
+#301 = EDGE_CURVE('',#293,#302,#304,.T.);
+#302 = VERTEX_POINT('',#303);
+#303 = CARTESIAN_POINT('',(-2.49,-0.125,2.E-002));
+#304 = LINE('',#305,#306);
+#305 = CARTESIAN_POINT('',(-2.495,-0.125,2.E-002));
+#306 = VECTOR('',#307,1.);
+#307 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#308 = ORIENTED_EDGE('',*,*,#309,.T.);
+#309 = EDGE_CURVE('',#302,#310,#312,.T.);
+#310 = VERTEX_POINT('',#311);
+#311 = CARTESIAN_POINT('',(-2.49,-0.375,2.E-002));
+#312 = LINE('',#313,#314);
+#313 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#314 = VECTOR('',#315,1.);
+#315 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#316 = ORIENTED_EDGE('',*,*,#317,.T.);
+#317 = EDGE_CURVE('',#310,#318,#320,.T.);
+#318 = VERTEX_POINT('',#319);
+#319 = CARTESIAN_POINT('',(-2.225,-0.375,2.E-002));
+#320 = LINE('',#321,#322);
+#321 = CARTESIAN_POINT('',(-2.3575,-0.375,2.E-002));
+#322 = VECTOR('',#323,1.);
+#323 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#324 = ORIENTED_EDGE('',*,*,#325,.T.);
+#325 = EDGE_CURVE('',#318,#326,#328,.T.);
+#326 = VERTEX_POINT('',#327);
+#327 = CARTESIAN_POINT('',(-2.225,-0.625,2.E-002));
+#328 = CIRCLE('',#329,0.125);
+#329 = AXIS2_PLACEMENT_3D('',#330,#331,#332);
+#330 = CARTESIAN_POINT('',(-2.225,-0.5,2.E-002));
+#331 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#332 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#333 = ORIENTED_EDGE('',*,*,#334,.T.);
+#334 = EDGE_CURVE('',#326,#335,#337,.T.);
+#335 = VERTEX_POINT('',#336);
+#336 = CARTESIAN_POINT('',(-2.49,-0.625,2.E-002));
+#337 = LINE('',#338,#339);
+#338 = CARTESIAN_POINT('',(-2.495,-0.625,2.E-002));
+#339 = VECTOR('',#340,1.);
+#340 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#341 = ORIENTED_EDGE('',*,*,#342,.T.);
+#342 = EDGE_CURVE('',#335,#343,#345,.T.);
+#343 = VERTEX_POINT('',#344);
+#344 = CARTESIAN_POINT('',(-2.49,-0.875,2.E-002));
+#345 = LINE('',#346,#347);
+#346 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#347 = VECTOR('',#348,1.);
+#348 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#349 = ORIENTED_EDGE('',*,*,#350,.T.);
+#350 = EDGE_CURVE('',#343,#351,#353,.T.);
+#351 = VERTEX_POINT('',#352);
+#352 = CARTESIAN_POINT('',(-2.225,-0.875,2.E-002));
+#353 = LINE('',#354,#355);
+#354 = CARTESIAN_POINT('',(-2.3575,-0.875,2.E-002));
+#355 = VECTOR('',#356,1.);
+#356 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#357 = ORIENTED_EDGE('',*,*,#358,.T.);
+#358 = EDGE_CURVE('',#351,#359,#361,.T.);
+#359 = VERTEX_POINT('',#360);
+#360 = CARTESIAN_POINT('',(-2.225,-1.125,2.E-002));
+#361 = CIRCLE('',#362,0.125);
+#362 = AXIS2_PLACEMENT_3D('',#363,#364,#365);
+#363 = CARTESIAN_POINT('',(-2.225,-1.,2.E-002));
+#364 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#365 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#366 = ORIENTED_EDGE('',*,*,#367,.T.);
+#367 = EDGE_CURVE('',#359,#368,#370,.T.);
+#368 = VERTEX_POINT('',#369);
+#369 = CARTESIAN_POINT('',(-2.49,-1.125,2.E-002));
+#370 = LINE('',#371,#372);
+#371 = CARTESIAN_POINT('',(-2.495,-1.125,2.E-002));
+#372 = VECTOR('',#373,1.);
+#373 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#374 = ORIENTED_EDGE('',*,*,#375,.T.);
+#375 = EDGE_CURVE('',#368,#376,#378,.T.);
+#376 = VERTEX_POINT('',#377);
+#377 = CARTESIAN_POINT('',(-2.49,-1.375,2.E-002));
+#378 = LINE('',#379,#380);
+#379 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#380 = VECTOR('',#381,1.);
+#381 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#382 = ORIENTED_EDGE('',*,*,#383,.T.);
+#383 = EDGE_CURVE('',#376,#384,#386,.T.);
+#384 = VERTEX_POINT('',#385);
+#385 = CARTESIAN_POINT('',(-2.225,-1.375,2.E-002));
+#386 = LINE('',#387,#388);
+#387 = CARTESIAN_POINT('',(-2.3575,-1.375,2.E-002));
+#388 = VECTOR('',#389,1.);
+#389 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#390 = ORIENTED_EDGE('',*,*,#391,.T.);
+#391 = EDGE_CURVE('',#384,#392,#394,.T.);
+#392 = VERTEX_POINT('',#393);
+#393 = CARTESIAN_POINT('',(-2.225,-1.625,2.E-002));
+#394 = CIRCLE('',#395,0.125);
+#395 = AXIS2_PLACEMENT_3D('',#396,#397,#398);
+#396 = CARTESIAN_POINT('',(-2.225,-1.5,2.E-002));
+#397 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#398 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#399 = ORIENTED_EDGE('',*,*,#400,.T.);
+#400 = EDGE_CURVE('',#392,#401,#403,.T.);
+#401 = VERTEX_POINT('',#402);
+#402 = CARTESIAN_POINT('',(-2.49,-1.625,2.E-002));
+#403 = LINE('',#404,#405);
+#404 = CARTESIAN_POINT('',(-2.495,-1.625,2.E-002));
+#405 = VECTOR('',#406,1.);
+#406 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#407 = ORIENTED_EDGE('',*,*,#408,.T.);
+#408 = EDGE_CURVE('',#401,#409,#411,.T.);
+#409 = VERTEX_POINT('',#410);
+#410 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#411 = LINE('',#412,#413);
+#412 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#413 = VECTOR('',#414,1.);
+#414 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#415 = ORIENTED_EDGE('',*,*,#416,.T.);
+#416 = EDGE_CURVE('',#409,#417,#419,.T.);
+#417 = VERTEX_POINT('',#418);
+#418 = CARTESIAN_POINT('',(-1.625,-2.49,2.E-002));
+#419 = LINE('',#420,#421);
+#420 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#421 = VECTOR('',#422,1.);
+#422 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#423 = ORIENTED_EDGE('',*,*,#424,.T.);
+#424 = EDGE_CURVE('',#417,#425,#427,.T.);
+#425 = VERTEX_POINT('',#426);
+#426 = CARTESIAN_POINT('',(-1.625,-2.225,2.E-002));
+#427 = LINE('',#428,#429);
+#428 = CARTESIAN_POINT('',(-1.625,0.1325,2.E-002));
+#429 = VECTOR('',#430,1.);
+#430 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#431 = ORIENTED_EDGE('',*,*,#432,.T.);
+#432 = EDGE_CURVE('',#425,#433,#435,.T.);
+#433 = VERTEX_POINT('',#434);
+#434 = CARTESIAN_POINT('',(-1.375,-2.225,2.E-002));
+#435 = CIRCLE('',#436,0.125);
+#436 = AXIS2_PLACEMENT_3D('',#437,#438,#439);
+#437 = CARTESIAN_POINT('',(-1.5,-2.225,2.E-002));
+#438 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#439 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#440 = ORIENTED_EDGE('',*,*,#441,.T.);
+#441 = EDGE_CURVE('',#433,#442,#444,.T.);
+#442 = VERTEX_POINT('',#443);
+#443 = CARTESIAN_POINT('',(-1.375,-2.49,2.E-002));
+#444 = LINE('',#445,#446);
+#445 = CARTESIAN_POINT('',(-1.375,-5.E-003,2.E-002));
+#446 = VECTOR('',#447,1.);
+#447 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#448 = ORIENTED_EDGE('',*,*,#449,.T.);
+#449 = EDGE_CURVE('',#442,#450,#452,.T.);
+#450 = VERTEX_POINT('',#451);
+#451 = CARTESIAN_POINT('',(-1.125,-2.49,2.E-002));
+#452 = LINE('',#453,#454);
+#453 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#454 = VECTOR('',#455,1.);
+#455 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#456 = ORIENTED_EDGE('',*,*,#457,.T.);
+#457 = EDGE_CURVE('',#450,#458,#460,.T.);
+#458 = VERTEX_POINT('',#459);
+#459 = CARTESIAN_POINT('',(-1.125,-2.225,2.E-002));
+#460 = LINE('',#461,#462);
+#461 = CARTESIAN_POINT('',(-1.125,0.1325,2.E-002));
+#462 = VECTOR('',#463,1.);
+#463 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#464 = ORIENTED_EDGE('',*,*,#465,.T.);
+#465 = EDGE_CURVE('',#458,#466,#468,.T.);
+#466 = VERTEX_POINT('',#467);
+#467 = CARTESIAN_POINT('',(-0.875,-2.225,2.E-002));
+#468 = CIRCLE('',#469,0.125);
+#469 = AXIS2_PLACEMENT_3D('',#470,#471,#472);
+#470 = CARTESIAN_POINT('',(-1.,-2.225,2.E-002));
+#471 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#472 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#473 = ORIENTED_EDGE('',*,*,#474,.T.);
+#474 = EDGE_CURVE('',#466,#475,#477,.T.);
+#475 = VERTEX_POINT('',#476);
+#476 = CARTESIAN_POINT('',(-0.875,-2.49,2.E-002));
+#477 = LINE('',#478,#479);
+#478 = CARTESIAN_POINT('',(-0.875,-5.E-003,2.E-002));
+#479 = VECTOR('',#480,1.);
+#480 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#481 = ORIENTED_EDGE('',*,*,#482,.T.);
+#482 = EDGE_CURVE('',#475,#483,#485,.T.);
+#483 = VERTEX_POINT('',#484);
+#484 = CARTESIAN_POINT('',(-0.625,-2.49,2.E-002));
+#485 = LINE('',#486,#487);
+#486 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#487 = VECTOR('',#488,1.);
+#488 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#489 = ORIENTED_EDGE('',*,*,#490,.T.);
+#490 = EDGE_CURVE('',#483,#491,#493,.T.);
+#491 = VERTEX_POINT('',#492);
+#492 = CARTESIAN_POINT('',(-0.625,-2.225,2.E-002));
+#493 = LINE('',#494,#495);
+#494 = CARTESIAN_POINT('',(-0.625,0.1325,2.E-002));
+#495 = VECTOR('',#496,1.);
+#496 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#497 = ORIENTED_EDGE('',*,*,#498,.T.);
+#498 = EDGE_CURVE('',#491,#499,#501,.T.);
+#499 = VERTEX_POINT('',#500);
+#500 = CARTESIAN_POINT('',(-0.375,-2.225,2.E-002));
+#501 = CIRCLE('',#502,0.125);
+#502 = AXIS2_PLACEMENT_3D('',#503,#504,#505);
+#503 = CARTESIAN_POINT('',(-0.5,-2.225,2.E-002));
+#504 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#505 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#506 = ORIENTED_EDGE('',*,*,#507,.T.);
+#507 = EDGE_CURVE('',#499,#508,#510,.T.);
+#508 = VERTEX_POINT('',#509);
+#509 = CARTESIAN_POINT('',(-0.375,-2.49,2.E-002));
+#510 = LINE('',#511,#512);
+#511 = CARTESIAN_POINT('',(-0.375,-5.E-003,2.E-002));
+#512 = VECTOR('',#513,1.);
+#513 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#514 = ORIENTED_EDGE('',*,*,#515,.T.);
+#515 = EDGE_CURVE('',#508,#516,#518,.T.);
+#516 = VERTEX_POINT('',#517);
+#517 = CARTESIAN_POINT('',(-0.125,-2.49,2.E-002));
+#518 = LINE('',#519,#520);
+#519 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#520 = VECTOR('',#521,1.);
+#521 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#522 = ORIENTED_EDGE('',*,*,#523,.T.);
+#523 = EDGE_CURVE('',#516,#524,#526,.T.);
+#524 = VERTEX_POINT('',#525);
+#525 = CARTESIAN_POINT('',(-0.125,-2.225,2.E-002));
+#526 = LINE('',#527,#528);
+#527 = CARTESIAN_POINT('',(-0.125,0.1325,2.E-002));
+#528 = VECTOR('',#529,1.);
+#529 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#530 = ORIENTED_EDGE('',*,*,#531,.T.);
+#531 = EDGE_CURVE('',#524,#532,#534,.T.);
+#532 = VERTEX_POINT('',#533);
+#533 = CARTESIAN_POINT('',(0.125,-2.225,2.E-002));
+#534 = CIRCLE('',#535,0.125);
+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);
+#536 = CARTESIAN_POINT('',(-9.936496070395E-016,-2.225,2.E-002));
+#537 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#538 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#539 = ORIENTED_EDGE('',*,*,#540,.T.);
+#540 = EDGE_CURVE('',#532,#541,#543,.T.);
+#541 = VERTEX_POINT('',#542);
+#542 = CARTESIAN_POINT('',(0.125,-2.49,2.E-002));
+#543 = LINE('',#544,#545);
+#544 = CARTESIAN_POINT('',(0.125,-5.E-003,2.E-002));
+#545 = VECTOR('',#546,1.);
+#546 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#547 = ORIENTED_EDGE('',*,*,#548,.T.);
+#548 = EDGE_CURVE('',#541,#549,#551,.T.);
+#549 = VERTEX_POINT('',#550);
+#550 = CARTESIAN_POINT('',(0.375,-2.49,2.E-002));
+#551 = LINE('',#552,#553);
+#552 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#553 = VECTOR('',#554,1.);
+#554 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#555 = ORIENTED_EDGE('',*,*,#556,.T.);
+#556 = EDGE_CURVE('',#549,#557,#559,.T.);
+#557 = VERTEX_POINT('',#558);
+#558 = CARTESIAN_POINT('',(0.375,-2.225,2.E-002));
+#559 = LINE('',#560,#561);
+#560 = CARTESIAN_POINT('',(0.375,0.1325,2.E-002));
+#561 = VECTOR('',#562,1.);
+#562 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#563 = ORIENTED_EDGE('',*,*,#564,.T.);
+#564 = EDGE_CURVE('',#557,#565,#567,.T.);
+#565 = VERTEX_POINT('',#566);
+#566 = CARTESIAN_POINT('',(0.625,-2.225,2.E-002));
+#567 = CIRCLE('',#568,0.125);
+#568 = AXIS2_PLACEMENT_3D('',#569,#570,#571);
+#569 = CARTESIAN_POINT('',(0.5,-2.225,2.E-002));
+#570 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#571 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#572 = ORIENTED_EDGE('',*,*,#573,.T.);
+#573 = EDGE_CURVE('',#565,#574,#576,.T.);
+#574 = VERTEX_POINT('',#575);
+#575 = CARTESIAN_POINT('',(0.625,-2.49,2.E-002));
+#576 = LINE('',#577,#578);
+#577 = CARTESIAN_POINT('',(0.625,-5.E-003,2.E-002));
+#578 = VECTOR('',#579,1.);
+#579 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#580 = ORIENTED_EDGE('',*,*,#581,.T.);
+#581 = EDGE_CURVE('',#574,#582,#584,.T.);
+#582 = VERTEX_POINT('',#583);
+#583 = CARTESIAN_POINT('',(0.875,-2.49,2.E-002));
+#584 = LINE('',#585,#586);
+#585 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#586 = VECTOR('',#587,1.);
+#587 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#588 = ORIENTED_EDGE('',*,*,#589,.T.);
+#589 = EDGE_CURVE('',#582,#590,#592,.T.);
+#590 = VERTEX_POINT('',#591);
+#591 = CARTESIAN_POINT('',(0.875,-2.225,2.E-002));
+#592 = LINE('',#593,#594);
+#593 = CARTESIAN_POINT('',(0.875,0.1325,2.E-002));
+#594 = VECTOR('',#595,1.);
+#595 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#596 = ORIENTED_EDGE('',*,*,#597,.T.);
+#597 = EDGE_CURVE('',#590,#598,#600,.T.);
+#598 = VERTEX_POINT('',#599);
+#599 = CARTESIAN_POINT('',(1.125,-2.225,2.E-002));
+#600 = CIRCLE('',#601,0.125);
+#601 = AXIS2_PLACEMENT_3D('',#602,#603,#604);
+#602 = CARTESIAN_POINT('',(1.,-2.225,2.E-002));
+#603 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#604 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#605 = ORIENTED_EDGE('',*,*,#606,.T.);
+#606 = EDGE_CURVE('',#598,#607,#609,.T.);
+#607 = VERTEX_POINT('',#608);
+#608 = CARTESIAN_POINT('',(1.125,-2.49,2.E-002));
+#609 = LINE('',#610,#611);
+#610 = CARTESIAN_POINT('',(1.125,-5.000000000001E-003,2.E-002));
+#611 = VECTOR('',#612,1.);
+#612 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#613 = ORIENTED_EDGE('',*,*,#614,.T.);
+#614 = EDGE_CURVE('',#607,#615,#617,.T.);
+#615 = VERTEX_POINT('',#616);
+#616 = CARTESIAN_POINT('',(1.375,-2.49,2.E-002));
+#617 = LINE('',#618,#619);
+#618 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#619 = VECTOR('',#620,1.);
+#620 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#621 = ORIENTED_EDGE('',*,*,#622,.T.);
+#622 = EDGE_CURVE('',#615,#623,#625,.T.);
+#623 = VERTEX_POINT('',#624);
+#624 = CARTESIAN_POINT('',(1.375,-2.225,2.E-002));
+#625 = LINE('',#626,#627);
+#626 = CARTESIAN_POINT('',(1.375,0.1325,2.E-002));
+#627 = VECTOR('',#628,1.);
+#628 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#629 = ORIENTED_EDGE('',*,*,#630,.T.);
+#630 = EDGE_CURVE('',#623,#631,#633,.T.);
+#631 = VERTEX_POINT('',#632);
+#632 = CARTESIAN_POINT('',(1.625,-2.225,2.E-002));
+#633 = CIRCLE('',#634,0.125);
+#634 = AXIS2_PLACEMENT_3D('',#635,#636,#637);
+#635 = CARTESIAN_POINT('',(1.5,-2.225,2.E-002));
+#636 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#637 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#638 = ORIENTED_EDGE('',*,*,#639,.T.);
+#639 = EDGE_CURVE('',#631,#640,#642,.T.);
+#640 = VERTEX_POINT('',#641);
+#641 = CARTESIAN_POINT('',(1.625,-2.49,2.E-002));
+#642 = LINE('',#643,#644);
+#643 = CARTESIAN_POINT('',(1.625,-5.000000000001E-003,2.E-002));
+#644 = VECTOR('',#645,1.);
+#645 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#646 = ORIENTED_EDGE('',*,*,#647,.T.);
+#647 = EDGE_CURVE('',#640,#648,#650,.T.);
+#648 = VERTEX_POINT('',#649);
+#649 = CARTESIAN_POINT('',(2.49,-2.49,2.E-002));
+#650 = LINE('',#651,#652);
+#651 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#652 = VECTOR('',#653,1.);
+#653 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#654 = ORIENTED_EDGE('',*,*,#655,.F.);
+#655 = EDGE_CURVE('',#656,#648,#658,.T.);
+#656 = VERTEX_POINT('',#657);
+#657 = CARTESIAN_POINT('',(2.49,-1.625,2.E-002));
+#658 = LINE('',#659,#660);
+#659 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#660 = VECTOR('',#661,1.);
+#661 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#662 = ORIENTED_EDGE('',*,*,#663,.T.);
+#663 = EDGE_CURVE('',#656,#664,#666,.T.);
+#664 = VERTEX_POINT('',#665);
+#665 = CARTESIAN_POINT('',(2.225,-1.625,2.E-002));
+#666 = LINE('',#667,#668);
+#667 = CARTESIAN_POINT('',(-0.1325,-1.625,2.E-002));
+#668 = VECTOR('',#669,1.);
+#669 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#670 = ORIENTED_EDGE('',*,*,#671,.T.);
+#671 = EDGE_CURVE('',#664,#672,#674,.T.);
+#672 = VERTEX_POINT('',#673);
+#673 = CARTESIAN_POINT('',(2.225,-1.375,2.E-002));
+#674 = CIRCLE('',#675,0.125);
+#675 = AXIS2_PLACEMENT_3D('',#676,#677,#678);
+#676 = CARTESIAN_POINT('',(2.225,-1.5,2.E-002));
+#677 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#678 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#679 = ORIENTED_EDGE('',*,*,#680,.T.);
+#680 = EDGE_CURVE('',#672,#681,#683,.T.);
+#681 = VERTEX_POINT('',#682);
+#682 = CARTESIAN_POINT('',(2.49,-1.375,2.E-002));
+#683 = LINE('',#684,#685);
+#684 = CARTESIAN_POINT('',(4.999999999999E-003,-1.375,2.E-002));
+#685 = VECTOR('',#686,1.);
+#686 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#687 = ORIENTED_EDGE('',*,*,#688,.F.);
+#688 = EDGE_CURVE('',#689,#681,#691,.T.);
+#689 = VERTEX_POINT('',#690);
+#690 = CARTESIAN_POINT('',(2.49,-1.125,2.E-002));
+#691 = LINE('',#692,#693);
+#692 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#693 = VECTOR('',#694,1.);
+#694 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#695 = ORIENTED_EDGE('',*,*,#696,.T.);
+#696 = EDGE_CURVE('',#689,#697,#699,.T.);
+#697 = VERTEX_POINT('',#698);
+#698 = CARTESIAN_POINT('',(2.225,-1.125,2.E-002));
+#699 = LINE('',#700,#701);
+#700 = CARTESIAN_POINT('',(-0.1325,-1.125,2.E-002));
+#701 = VECTOR('',#702,1.);
+#702 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#703 = ORIENTED_EDGE('',*,*,#704,.T.);
+#704 = EDGE_CURVE('',#697,#705,#707,.T.);
+#705 = VERTEX_POINT('',#706);
+#706 = CARTESIAN_POINT('',(2.225,-0.875,2.E-002));
+#707 = CIRCLE('',#708,0.125);
+#708 = AXIS2_PLACEMENT_3D('',#709,#710,#711);
+#709 = CARTESIAN_POINT('',(2.225,-1.,2.E-002));
+#710 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#711 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#712 = ORIENTED_EDGE('',*,*,#713,.T.);
+#713 = EDGE_CURVE('',#705,#714,#716,.T.);
+#714 = VERTEX_POINT('',#715);
+#715 = CARTESIAN_POINT('',(2.49,-0.875,2.E-002));
+#716 = LINE('',#717,#718);
+#717 = CARTESIAN_POINT('',(4.999999999999E-003,-0.875,2.E-002));
+#718 = VECTOR('',#719,1.);
+#719 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#720 = ORIENTED_EDGE('',*,*,#721,.F.);
+#721 = EDGE_CURVE('',#722,#714,#724,.T.);
+#722 = VERTEX_POINT('',#723);
+#723 = CARTESIAN_POINT('',(2.49,-0.625,2.E-002));
+#724 = LINE('',#725,#726);
+#725 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#726 = VECTOR('',#727,1.);
+#727 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#728 = ORIENTED_EDGE('',*,*,#729,.T.);
+#729 = EDGE_CURVE('',#722,#730,#732,.T.);
+#730 = VERTEX_POINT('',#731);
+#731 = CARTESIAN_POINT('',(2.225,-0.625,2.E-002));
+#732 = LINE('',#733,#734);
+#733 = CARTESIAN_POINT('',(-0.1325,-0.625,2.E-002));
+#734 = VECTOR('',#735,1.);
+#735 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#736 = ORIENTED_EDGE('',*,*,#737,.T.);
+#737 = EDGE_CURVE('',#730,#738,#740,.T.);
+#738 = VERTEX_POINT('',#739);
+#739 = CARTESIAN_POINT('',(2.225,-0.375,2.E-002));
+#740 = CIRCLE('',#741,0.125);
+#741 = AXIS2_PLACEMENT_3D('',#742,#743,#744);
+#742 = CARTESIAN_POINT('',(2.225,-0.5,2.E-002));
+#743 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#744 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#745 = ORIENTED_EDGE('',*,*,#746,.T.);
+#746 = EDGE_CURVE('',#738,#747,#749,.T.);
+#747 = VERTEX_POINT('',#748);
+#748 = CARTESIAN_POINT('',(2.49,-0.375,2.E-002));
+#749 = LINE('',#750,#751);
+#750 = CARTESIAN_POINT('',(5.E-003,-0.375,2.E-002));
+#751 = VECTOR('',#752,1.);
+#752 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#753 = ORIENTED_EDGE('',*,*,#754,.F.);
+#754 = EDGE_CURVE('',#755,#747,#757,.T.);
+#755 = VERTEX_POINT('',#756);
+#756 = CARTESIAN_POINT('',(2.49,-0.125,2.E-002));
+#757 = LINE('',#758,#759);
+#758 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#759 = VECTOR('',#760,1.);
+#760 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#761 = ORIENTED_EDGE('',*,*,#762,.T.);
+#762 = EDGE_CURVE('',#755,#763,#765,.T.);
+#763 = VERTEX_POINT('',#764);
+#764 = CARTESIAN_POINT('',(2.225,-0.125,2.E-002));
+#765 = LINE('',#766,#767);
+#766 = CARTESIAN_POINT('',(-0.1325,-0.125,2.E-002));
+#767 = VECTOR('',#768,1.);
+#768 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#769 = ORIENTED_EDGE('',*,*,#770,.T.);
+#770 = EDGE_CURVE('',#763,#771,#773,.T.);
+#771 = VERTEX_POINT('',#772);
+#772 = CARTESIAN_POINT('',(2.225,0.125,2.E-002));
+#773 = CIRCLE('',#774,0.125);
+#774 = AXIS2_PLACEMENT_3D('',#775,#776,#777);
+#775 = CARTESIAN_POINT('',(2.225,-4.940492459582E-016,2.E-002));
+#776 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#777 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#778 = ORIENTED_EDGE('',*,*,#779,.T.);
+#779 = EDGE_CURVE('',#771,#780,#782,.T.);
+#780 = VERTEX_POINT('',#781);
+#781 = CARTESIAN_POINT('',(2.49,0.125,2.E-002));
+#782 = LINE('',#783,#784);
+#783 = CARTESIAN_POINT('',(5.E-003,0.125,2.E-002));
+#784 = VECTOR('',#785,1.);
+#785 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#786 = ORIENTED_EDGE('',*,*,#787,.F.);
+#787 = EDGE_CURVE('',#788,#780,#790,.T.);
+#788 = VERTEX_POINT('',#789);
+#789 = CARTESIAN_POINT('',(2.49,0.375,2.E-002));
+#790 = LINE('',#791,#792);
+#791 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#792 = VECTOR('',#793,1.);
+#793 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#794 = ORIENTED_EDGE('',*,*,#795,.T.);
+#795 = EDGE_CURVE('',#788,#796,#798,.T.);
+#796 = VERTEX_POINT('',#797);
+#797 = CARTESIAN_POINT('',(2.225,0.375,2.E-002));
+#798 = LINE('',#799,#800);
+#799 = CARTESIAN_POINT('',(-0.1325,0.375,2.E-002));
+#800 = VECTOR('',#801,1.);
+#801 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#802 = ORIENTED_EDGE('',*,*,#803,.T.);
+#803 = EDGE_CURVE('',#796,#804,#806,.T.);
+#804 = VERTEX_POINT('',#805);
+#805 = CARTESIAN_POINT('',(2.225,0.625,2.E-002));
+#806 = CIRCLE('',#807,0.125);
+#807 = AXIS2_PLACEMENT_3D('',#808,#809,#810);
+#808 = CARTESIAN_POINT('',(2.225,0.5,2.E-002));
+#809 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#810 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#811 = ORIENTED_EDGE('',*,*,#812,.T.);
+#812 = EDGE_CURVE('',#804,#813,#815,.T.);
+#813 = VERTEX_POINT('',#814);
+#814 = CARTESIAN_POINT('',(2.49,0.625,2.E-002));
+#815 = LINE('',#816,#817);
+#816 = CARTESIAN_POINT('',(5.E-003,0.625,2.E-002));
+#817 = VECTOR('',#818,1.);
+#818 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#819 = ORIENTED_EDGE('',*,*,#820,.F.);
+#820 = EDGE_CURVE('',#821,#813,#823,.T.);
+#821 = VERTEX_POINT('',#822);
+#822 = CARTESIAN_POINT('',(2.49,0.875,2.E-002));
+#823 = LINE('',#824,#825);
+#824 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#825 = VECTOR('',#826,1.);
+#826 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#827 = ORIENTED_EDGE('',*,*,#828,.T.);
+#828 = EDGE_CURVE('',#821,#829,#831,.T.);
+#829 = VERTEX_POINT('',#830);
+#830 = CARTESIAN_POINT('',(2.225,0.875,2.E-002));
+#831 = LINE('',#832,#833);
+#832 = CARTESIAN_POINT('',(-0.1325,0.875,2.E-002));
+#833 = VECTOR('',#834,1.);
+#834 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#835 = ORIENTED_EDGE('',*,*,#836,.T.);
+#836 = EDGE_CURVE('',#829,#837,#839,.T.);
+#837 = VERTEX_POINT('',#838);
+#838 = CARTESIAN_POINT('',(2.225,1.125,2.E-002));
+#839 = CIRCLE('',#840,0.125);
+#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843);
+#841 = CARTESIAN_POINT('',(2.225,1.,2.E-002));
+#842 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#843 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#844 = ORIENTED_EDGE('',*,*,#845,.T.);
+#845 = EDGE_CURVE('',#837,#846,#848,.T.);
+#846 = VERTEX_POINT('',#847);
+#847 = CARTESIAN_POINT('',(2.49,1.125,2.E-002));
+#848 = LINE('',#849,#850);
+#849 = CARTESIAN_POINT('',(5.E-003,1.125,2.E-002));
+#850 = VECTOR('',#851,1.);
+#851 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#852 = ORIENTED_EDGE('',*,*,#853,.F.);
+#853 = EDGE_CURVE('',#854,#846,#856,.T.);
+#854 = VERTEX_POINT('',#855);
+#855 = CARTESIAN_POINT('',(2.49,1.375,2.E-002));
+#856 = LINE('',#857,#858);
+#857 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#858 = VECTOR('',#859,1.);
+#859 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#860 = ORIENTED_EDGE('',*,*,#861,.T.);
+#861 = EDGE_CURVE('',#854,#862,#864,.T.);
+#862 = VERTEX_POINT('',#863);
+#863 = CARTESIAN_POINT('',(2.225,1.375,2.E-002));
+#864 = LINE('',#865,#866);
+#865 = CARTESIAN_POINT('',(-0.1325,1.375,2.E-002));
+#866 = VECTOR('',#867,1.);
+#867 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#868 = ORIENTED_EDGE('',*,*,#869,.T.);
+#869 = EDGE_CURVE('',#862,#870,#872,.T.);
+#870 = VERTEX_POINT('',#871);
+#871 = CARTESIAN_POINT('',(2.225,1.625,2.E-002));
+#872 = CIRCLE('',#873,0.125);
+#873 = AXIS2_PLACEMENT_3D('',#874,#875,#876);
+#874 = CARTESIAN_POINT('',(2.225,1.5,2.E-002));
+#875 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#876 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#877 = ORIENTED_EDGE('',*,*,#878,.T.);
+#878 = EDGE_CURVE('',#870,#879,#881,.T.);
+#879 = VERTEX_POINT('',#880);
+#880 = CARTESIAN_POINT('',(2.49,1.625,2.E-002));
+#881 = LINE('',#882,#883);
+#882 = CARTESIAN_POINT('',(5.E-003,1.625,2.E-002));
+#883 = VECTOR('',#884,1.);
+#884 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#885 = ORIENTED_EDGE('',*,*,#886,.F.);
+#886 = EDGE_CURVE('',#887,#879,#889,.T.);
+#887 = VERTEX_POINT('',#888);
+#888 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#889 = LINE('',#890,#891);
+#890 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#891 = VECTOR('',#892,1.);
+#892 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#893 = ORIENTED_EDGE('',*,*,#894,.F.);
+#894 = EDGE_CURVE('',#895,#887,#897,.T.);
+#895 = VERTEX_POINT('',#896);
+#896 = CARTESIAN_POINT('',(1.625,2.49,2.E-002));
+#897 = LINE('',#898,#899);
+#898 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#899 = VECTOR('',#900,1.);
+#900 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#901 = ORIENTED_EDGE('',*,*,#902,.T.);
+#902 = EDGE_CURVE('',#895,#903,#905,.T.);
+#903 = VERTEX_POINT('',#904);
+#904 = CARTESIAN_POINT('',(1.625,2.225,2.E-002));
+#905 = LINE('',#906,#907);
+#906 = CARTESIAN_POINT('',(1.625,2.3575,2.E-002));
+#907 = VECTOR('',#908,1.);
+#908 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#909 = ORIENTED_EDGE('',*,*,#910,.T.);
+#910 = EDGE_CURVE('',#903,#911,#913,.T.);
+#911 = VERTEX_POINT('',#912);
+#912 = CARTESIAN_POINT('',(1.375,2.225,2.E-002));
+#913 = CIRCLE('',#914,0.125);
+#914 = AXIS2_PLACEMENT_3D('',#915,#916,#917);
+#915 = CARTESIAN_POINT('',(1.5,2.225,2.E-002));
+#916 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#917 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#918 = ORIENTED_EDGE('',*,*,#919,.T.);
+#919 = EDGE_CURVE('',#911,#920,#922,.T.);
+#920 = VERTEX_POINT('',#921);
+#921 = CARTESIAN_POINT('',(1.375,2.49,2.E-002));
+#922 = LINE('',#923,#924);
+#923 = CARTESIAN_POINT('',(1.375,2.495,2.E-002));
+#924 = VECTOR('',#925,1.);
+#925 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#926 = ORIENTED_EDGE('',*,*,#927,.F.);
+#927 = EDGE_CURVE('',#928,#920,#930,.T.);
+#928 = VERTEX_POINT('',#929);
+#929 = CARTESIAN_POINT('',(1.125,2.49,2.E-002));
+#930 = LINE('',#931,#932);
+#931 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#932 = VECTOR('',#933,1.);
+#933 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#934 = ORIENTED_EDGE('',*,*,#935,.T.);
+#935 = EDGE_CURVE('',#928,#936,#938,.T.);
+#936 = VERTEX_POINT('',#937);
+#937 = CARTESIAN_POINT('',(1.125,2.225,2.E-002));
+#938 = LINE('',#939,#940);
+#939 = CARTESIAN_POINT('',(1.125,2.3575,2.E-002));
+#940 = VECTOR('',#941,1.);
+#941 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#942 = ORIENTED_EDGE('',*,*,#943,.T.);
+#943 = EDGE_CURVE('',#936,#944,#946,.T.);
+#944 = VERTEX_POINT('',#945);
+#945 = CARTESIAN_POINT('',(0.875,2.225,2.E-002));
+#946 = CIRCLE('',#947,0.125);
+#947 = AXIS2_PLACEMENT_3D('',#948,#949,#950);
+#948 = CARTESIAN_POINT('',(1.,2.225,2.E-002));
+#949 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#950 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#951 = ORIENTED_EDGE('',*,*,#952,.T.);
+#952 = EDGE_CURVE('',#944,#953,#955,.T.);
+#953 = VERTEX_POINT('',#954);
+#954 = CARTESIAN_POINT('',(0.875,2.49,2.E-002));
+#955 = LINE('',#956,#957);
+#956 = CARTESIAN_POINT('',(0.875,2.495,2.E-002));
+#957 = VECTOR('',#958,1.);
+#958 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#959 = ORIENTED_EDGE('',*,*,#960,.F.);
+#960 = EDGE_CURVE('',#961,#953,#963,.T.);
+#961 = VERTEX_POINT('',#962);
+#962 = CARTESIAN_POINT('',(0.625,2.49,2.E-002));
+#963 = LINE('',#964,#965);
+#964 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#965 = VECTOR('',#966,1.);
+#966 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#967 = ORIENTED_EDGE('',*,*,#968,.T.);
+#968 = EDGE_CURVE('',#961,#969,#971,.T.);
+#969 = VERTEX_POINT('',#970);
+#970 = CARTESIAN_POINT('',(0.625,2.225,2.E-002));
+#971 = LINE('',#972,#973);
+#972 = CARTESIAN_POINT('',(0.625,2.3575,2.E-002));
+#973 = VECTOR('',#974,1.);
+#974 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#975 = ORIENTED_EDGE('',*,*,#976,.T.);
+#976 = EDGE_CURVE('',#969,#977,#979,.T.);
+#977 = VERTEX_POINT('',#978);
+#978 = CARTESIAN_POINT('',(0.375,2.225,2.E-002));
+#979 = CIRCLE('',#980,0.125);
+#980 = AXIS2_PLACEMENT_3D('',#981,#982,#983);
+#981 = CARTESIAN_POINT('',(0.5,2.225,2.E-002));
+#982 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#983 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#984 = ORIENTED_EDGE('',*,*,#985,.T.);
+#985 = EDGE_CURVE('',#977,#986,#988,.T.);
+#986 = VERTEX_POINT('',#987);
+#987 = CARTESIAN_POINT('',(0.375,2.49,2.E-002));
+#988 = LINE('',#989,#990);
+#989 = CARTESIAN_POINT('',(0.375,2.495,2.E-002));
+#990 = VECTOR('',#991,1.);
+#991 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#992 = ORIENTED_EDGE('',*,*,#993,.F.);
+#993 = EDGE_CURVE('',#994,#986,#996,.T.);
+#994 = VERTEX_POINT('',#995);
+#995 = CARTESIAN_POINT('',(0.125,2.49,2.E-002));
+#996 = LINE('',#997,#998);
+#997 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#998 = VECTOR('',#999,1.);
+#999 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1000 = ORIENTED_EDGE('',*,*,#1001,.T.);
+#1001 = EDGE_CURVE('',#994,#1002,#1004,.T.);
+#1002 = VERTEX_POINT('',#1003);
+#1003 = CARTESIAN_POINT('',(0.125,2.225,2.E-002));
+#1004 = LINE('',#1005,#1006);
+#1005 = CARTESIAN_POINT('',(0.125,2.3575,2.E-002));
+#1006 = VECTOR('',#1007,1.);
+#1007 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1008 = ORIENTED_EDGE('',*,*,#1009,.T.);
+#1009 = EDGE_CURVE('',#1002,#1010,#1012,.T.);
+#1010 = VERTEX_POINT('',#1011);
+#1011 = CARTESIAN_POINT('',(-0.125,2.225,2.E-002));
+#1012 = CIRCLE('',#1013,0.125);
+#1013 = AXIS2_PLACEMENT_3D('',#1014,#1015,#1016);
+#1014 = CARTESIAN_POINT('',(7.438494264989E-016,2.225,2.E-002));
+#1015 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1016 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#1017 = ORIENTED_EDGE('',*,*,#1018,.T.);
+#1018 = EDGE_CURVE('',#1010,#1019,#1021,.T.);
+#1019 = VERTEX_POINT('',#1020);
+#1020 = CARTESIAN_POINT('',(-0.125,2.49,2.E-002));
+#1021 = LINE('',#1022,#1023);
+#1022 = CARTESIAN_POINT('',(-0.125,2.495,2.E-002));
+#1023 = VECTOR('',#1024,1.);
+#1024 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1025 = ORIENTED_EDGE('',*,*,#1026,.F.);
+#1026 = EDGE_CURVE('',#1027,#1019,#1029,.T.);
+#1027 = VERTEX_POINT('',#1028);
+#1028 = CARTESIAN_POINT('',(-0.375,2.49,2.E-002));
+#1029 = LINE('',#1030,#1031);
+#1030 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1031 = VECTOR('',#1032,1.);
+#1032 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1033 = ORIENTED_EDGE('',*,*,#1034,.T.);
+#1034 = EDGE_CURVE('',#1027,#1035,#1037,.T.);
+#1035 = VERTEX_POINT('',#1036);
+#1036 = CARTESIAN_POINT('',(-0.375,2.225,2.E-002));
+#1037 = LINE('',#1038,#1039);
+#1038 = CARTESIAN_POINT('',(-0.375,2.3575,2.E-002));
+#1039 = VECTOR('',#1040,1.);
+#1040 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1041 = ORIENTED_EDGE('',*,*,#1042,.T.);
+#1042 = EDGE_CURVE('',#1035,#1043,#1045,.T.);
+#1043 = VERTEX_POINT('',#1044);
+#1044 = CARTESIAN_POINT('',(-0.625,2.225,2.E-002));
+#1045 = CIRCLE('',#1046,0.125);
+#1046 = AXIS2_PLACEMENT_3D('',#1047,#1048,#1049);
+#1047 = CARTESIAN_POINT('',(-0.5,2.225,2.E-002));
+#1048 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1049 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#1050 = ORIENTED_EDGE('',*,*,#1051,.T.);
+#1051 = EDGE_CURVE('',#1043,#1052,#1054,.T.);
+#1052 = VERTEX_POINT('',#1053);
+#1053 = CARTESIAN_POINT('',(-0.625,2.49,2.E-002));
+#1054 = LINE('',#1055,#1056);
+#1055 = CARTESIAN_POINT('',(-0.625,2.495,2.E-002));
+#1056 = VECTOR('',#1057,1.);
+#1057 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1058 = ORIENTED_EDGE('',*,*,#1059,.F.);
+#1059 = EDGE_CURVE('',#1060,#1052,#1062,.T.);
+#1060 = VERTEX_POINT('',#1061);
+#1061 = CARTESIAN_POINT('',(-0.875,2.49,2.E-002));
+#1062 = LINE('',#1063,#1064);
+#1063 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1064 = VECTOR('',#1065,1.);
+#1065 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1066 = ORIENTED_EDGE('',*,*,#1067,.T.);
+#1067 = EDGE_CURVE('',#1060,#1068,#1070,.T.);
+#1068 = VERTEX_POINT('',#1069);
+#1069 = CARTESIAN_POINT('',(-0.875,2.225,2.E-002));
+#1070 = LINE('',#1071,#1072);
+#1071 = CARTESIAN_POINT('',(-0.875,2.3575,2.E-002));
+#1072 = VECTOR('',#1073,1.);
+#1073 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1074 = ORIENTED_EDGE('',*,*,#1075,.T.);
+#1075 = EDGE_CURVE('',#1068,#1076,#1078,.T.);
+#1076 = VERTEX_POINT('',#1077);
+#1077 = CARTESIAN_POINT('',(-1.125,2.225,2.E-002));
+#1078 = CIRCLE('',#1079,0.125);
+#1079 = AXIS2_PLACEMENT_3D('',#1080,#1081,#1082);
+#1080 = CARTESIAN_POINT('',(-1.,2.225,2.E-002));
+#1081 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1082 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#1083 = ORIENTED_EDGE('',*,*,#1084,.T.);
+#1084 = EDGE_CURVE('',#1076,#1085,#1087,.T.);
+#1085 = VERTEX_POINT('',#1086);
+#1086 = CARTESIAN_POINT('',(-1.125,2.49,2.E-002));
+#1087 = LINE('',#1088,#1089);
+#1088 = CARTESIAN_POINT('',(-1.125,2.495,2.E-002));
+#1089 = VECTOR('',#1090,1.);
+#1090 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1091 = ORIENTED_EDGE('',*,*,#1092,.F.);
+#1092 = EDGE_CURVE('',#1093,#1085,#1095,.T.);
+#1093 = VERTEX_POINT('',#1094);
+#1094 = CARTESIAN_POINT('',(-1.375,2.49,2.E-002));
+#1095 = LINE('',#1096,#1097);
+#1096 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1097 = VECTOR('',#1098,1.);
+#1098 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1099 = ORIENTED_EDGE('',*,*,#1100,.T.);
+#1100 = EDGE_CURVE('',#1093,#1101,#1103,.T.);
+#1101 = VERTEX_POINT('',#1102);
+#1102 = CARTESIAN_POINT('',(-1.375,2.225,2.E-002));
+#1103 = LINE('',#1104,#1105);
+#1104 = CARTESIAN_POINT('',(-1.375,2.3575,2.E-002));
+#1105 = VECTOR('',#1106,1.);
+#1106 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1107 = ORIENTED_EDGE('',*,*,#1108,.T.);
+#1108 = EDGE_CURVE('',#1101,#1109,#1111,.T.);
+#1109 = VERTEX_POINT('',#1110);
+#1110 = CARTESIAN_POINT('',(-1.625,2.225,2.E-002));
+#1111 = CIRCLE('',#1112,0.125);
+#1112 = AXIS2_PLACEMENT_3D('',#1113,#1114,#1115);
+#1113 = CARTESIAN_POINT('',(-1.5,2.225,2.E-002));
+#1114 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1115 = DIRECTION('',(-1.,4.555315873023E-016,-0.E+000));
+#1116 = ORIENTED_EDGE('',*,*,#1117,.T.);
+#1117 = EDGE_CURVE('',#1109,#194,#1118,.T.);
+#1118 = LINE('',#1119,#1120);
+#1119 = CARTESIAN_POINT('',(-1.625,2.495,2.E-002));
+#1120 = VECTOR('',#1121,1.);
+#1121 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1122 = FACE_BOUND('',#1123,.F.);
+#1123 = EDGE_LOOP('',(#1124,#1134,#1142,#1150,#1158));
+#1124 = ORIENTED_EDGE('',*,*,#1125,.F.);
+#1125 = EDGE_CURVE('',#1126,#1128,#1130,.T.);
+#1126 = VERTEX_POINT('',#1127);
+#1127 = CARTESIAN_POINT('',(-1.575,1.375,2.E-002));
+#1128 = VERTEX_POINT('',#1129);
+#1129 = CARTESIAN_POINT('',(-1.575,-1.575,2.E-002));
+#1130 = LINE('',#1131,#1132);
+#1131 = CARTESIAN_POINT('',(-1.575,1.375,2.E-002));
+#1132 = VECTOR('',#1133,1.);
+#1133 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#1134 = ORIENTED_EDGE('',*,*,#1135,.F.);
+#1135 = EDGE_CURVE('',#1136,#1126,#1138,.T.);
+#1136 = VERTEX_POINT('',#1137);
+#1137 = CARTESIAN_POINT('',(-1.375,1.575,2.E-002));
+#1138 = LINE('',#1139,#1140);
+#1139 = CARTESIAN_POINT('',(-1.375,1.575,2.E-002));
+#1140 = VECTOR('',#1141,1.);
+#1141 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000));
+#1142 = ORIENTED_EDGE('',*,*,#1143,.F.);
+#1143 = EDGE_CURVE('',#1144,#1136,#1146,.T.);
+#1144 = VERTEX_POINT('',#1145);
+#1145 = CARTESIAN_POINT('',(1.575,1.575,2.E-002));
+#1146 = LINE('',#1147,#1148);
+#1147 = CARTESIAN_POINT('',(1.575,1.575,2.E-002));
+#1148 = VECTOR('',#1149,1.);
+#1149 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000));
+#1150 = ORIENTED_EDGE('',*,*,#1151,.F.);
+#1151 = EDGE_CURVE('',#1152,#1144,#1154,.T.);
+#1152 = VERTEX_POINT('',#1153);
+#1153 = CARTESIAN_POINT('',(1.575,-1.575,2.E-002));
+#1154 = LINE('',#1155,#1156);
+#1155 = CARTESIAN_POINT('',(1.575,-1.575,2.E-002));
+#1156 = VECTOR('',#1157,1.);
+#1157 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1158 = ORIENTED_EDGE('',*,*,#1159,.F.);
+#1159 = EDGE_CURVE('',#1128,#1152,#1160,.T.);
+#1160 = LINE('',#1161,#1162);
+#1161 = CARTESIAN_POINT('',(-1.575,-1.575,2.E-002));
+#1162 = VECTOR('',#1163,1.);
+#1163 = DIRECTION('',(1.,-1.515542541552E-016,0.E+000));
+#1164 = PLANE('',#1165);
+#1165 = AXIS2_PLACEMENT_3D('',#1166,#1167,#1168);
+#1166 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1167 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1168 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#1169 = ADVANCED_FACE('',(#1170),#1342,.F.);
+#1170 = FACE_BOUND('',#1171,.F.);
+#1171 = EDGE_LOOP('',(#1172,#1173,#1181,#1189,#1195,#1196,#1204,#1212,
+#1218,#1219,#1227,#1235,#1241,#1242,#1250,#1258,#1264,#1265,#1273,
+#1281,#1287,#1288,#1296,#1304,#1310,#1311,#1312,#1318,#1319,#1320,
+#1328,#1336));
+#1172 = ORIENTED_EDGE('',*,*,#201,.F.);
+#1173 = ORIENTED_EDGE('',*,*,#1174,.T.);
+#1174 = EDGE_CURVE('',#192,#1175,#1177,.T.);
+#1175 = VERTEX_POINT('',#1176);
+#1176 = CARTESIAN_POINT('',(-2.49,2.49,0.92));
+#1177 = LINE('',#1178,#1179);
+#1178 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1179 = VECTOR('',#1180,1.);
+#1180 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1181 = ORIENTED_EDGE('',*,*,#1182,.T.);
+#1182 = EDGE_CURVE('',#1175,#1183,#1185,.T.);
+#1183 = VERTEX_POINT('',#1184);
+#1184 = CARTESIAN_POINT('',(-2.49,-2.49,0.92));
+#1185 = LINE('',#1186,#1187);
+#1186 = CARTESIAN_POINT('',(-2.49,2.49,0.92));
+#1187 = VECTOR('',#1188,1.);
+#1188 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#1189 = ORIENTED_EDGE('',*,*,#1190,.F.);
+#1190 = EDGE_CURVE('',#409,#1183,#1191,.T.);
+#1191 = LINE('',#1192,#1193);
+#1192 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#1193 = VECTOR('',#1194,1.);
+#1194 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1195 = ORIENTED_EDGE('',*,*,#408,.F.);
+#1196 = ORIENTED_EDGE('',*,*,#1197,.T.);
+#1197 = EDGE_CURVE('',#401,#1198,#1200,.T.);
+#1198 = VERTEX_POINT('',#1199);
+#1199 = CARTESIAN_POINT('',(-2.49,-1.625,0.2));
+#1200 = LINE('',#1201,#1202);
+#1201 = CARTESIAN_POINT('',(-2.49,-1.625,1.E-002));
+#1202 = VECTOR('',#1203,1.);
+#1203 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1204 = ORIENTED_EDGE('',*,*,#1205,.T.);
+#1205 = EDGE_CURVE('',#1198,#1206,#1208,.T.);
+#1206 = VERTEX_POINT('',#1207);
+#1207 = CARTESIAN_POINT('',(-2.49,-1.375,0.2));
+#1208 = LINE('',#1209,#1210);
+#1209 = CARTESIAN_POINT('',(-2.49,0.4325,0.2));
+#1210 = VECTOR('',#1211,1.);
+#1211 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1212 = ORIENTED_EDGE('',*,*,#1213,.T.);
+#1213 = EDGE_CURVE('',#1206,#376,#1214,.T.);
+#1214 = LINE('',#1215,#1216);
+#1215 = CARTESIAN_POINT('',(-2.49,-1.375,1.E-002));
+#1216 = VECTOR('',#1217,1.);
+#1217 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1218 = ORIENTED_EDGE('',*,*,#375,.F.);
+#1219 = ORIENTED_EDGE('',*,*,#1220,.T.);
+#1220 = EDGE_CURVE('',#368,#1221,#1223,.T.);
+#1221 = VERTEX_POINT('',#1222);
+#1222 = CARTESIAN_POINT('',(-2.49,-1.125,0.2));
+#1223 = LINE('',#1224,#1225);
+#1224 = CARTESIAN_POINT('',(-2.49,-1.125,1.E-002));
+#1225 = VECTOR('',#1226,1.);
+#1226 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1227 = ORIENTED_EDGE('',*,*,#1228,.T.);
+#1228 = EDGE_CURVE('',#1221,#1229,#1231,.T.);
+#1229 = VERTEX_POINT('',#1230);
+#1230 = CARTESIAN_POINT('',(-2.49,-0.875,0.2));
+#1231 = LINE('',#1232,#1233);
+#1232 = CARTESIAN_POINT('',(-2.49,0.6825,0.2));
+#1233 = VECTOR('',#1234,1.);
+#1234 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1235 = ORIENTED_EDGE('',*,*,#1236,.T.);
+#1236 = EDGE_CURVE('',#1229,#343,#1237,.T.);
+#1237 = LINE('',#1238,#1239);
+#1238 = CARTESIAN_POINT('',(-2.49,-0.875,1.E-002));
+#1239 = VECTOR('',#1240,1.);
+#1240 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1241 = ORIENTED_EDGE('',*,*,#342,.F.);
+#1242 = ORIENTED_EDGE('',*,*,#1243,.T.);
+#1243 = EDGE_CURVE('',#335,#1244,#1246,.T.);
+#1244 = VERTEX_POINT('',#1245);
+#1245 = CARTESIAN_POINT('',(-2.49,-0.625,0.2));
+#1246 = LINE('',#1247,#1248);
+#1247 = CARTESIAN_POINT('',(-2.49,-0.625,1.E-002));
+#1248 = VECTOR('',#1249,1.);
+#1249 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1250 = ORIENTED_EDGE('',*,*,#1251,.T.);
+#1251 = EDGE_CURVE('',#1244,#1252,#1254,.T.);
+#1252 = VERTEX_POINT('',#1253);
+#1253 = CARTESIAN_POINT('',(-2.49,-0.375,0.2));
+#1254 = LINE('',#1255,#1256);
+#1255 = CARTESIAN_POINT('',(-2.49,0.9325,0.2));
+#1256 = VECTOR('',#1257,1.);
+#1257 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1258 = ORIENTED_EDGE('',*,*,#1259,.T.);
+#1259 = EDGE_CURVE('',#1252,#310,#1260,.T.);
+#1260 = LINE('',#1261,#1262);
+#1261 = CARTESIAN_POINT('',(-2.49,-0.375,1.E-002));
+#1262 = VECTOR('',#1263,1.);
+#1263 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1264 = ORIENTED_EDGE('',*,*,#309,.F.);
+#1265 = ORIENTED_EDGE('',*,*,#1266,.T.);
+#1266 = EDGE_CURVE('',#302,#1267,#1269,.T.);
+#1267 = VERTEX_POINT('',#1268);
+#1268 = CARTESIAN_POINT('',(-2.49,-0.125,0.2));
+#1269 = LINE('',#1270,#1271);
+#1270 = CARTESIAN_POINT('',(-2.49,-0.125,1.E-002));
+#1271 = VECTOR('',#1272,1.);
+#1272 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1273 = ORIENTED_EDGE('',*,*,#1274,.T.);
+#1274 = EDGE_CURVE('',#1267,#1275,#1277,.T.);
+#1275 = VERTEX_POINT('',#1276);
+#1276 = CARTESIAN_POINT('',(-2.49,0.125,0.2));
+#1277 = LINE('',#1278,#1279);
+#1278 = CARTESIAN_POINT('',(-2.49,1.1825,0.2));
+#1279 = VECTOR('',#1280,1.);
+#1280 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1281 = ORIENTED_EDGE('',*,*,#1282,.T.);
+#1282 = EDGE_CURVE('',#1275,#277,#1283,.T.);
+#1283 = LINE('',#1284,#1285);
+#1284 = CARTESIAN_POINT('',(-2.49,0.125,1.E-002));
+#1285 = VECTOR('',#1286,1.);
+#1286 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1287 = ORIENTED_EDGE('',*,*,#276,.F.);
+#1288 = ORIENTED_EDGE('',*,*,#1289,.T.);
+#1289 = EDGE_CURVE('',#269,#1290,#1292,.T.);
+#1290 = VERTEX_POINT('',#1291);
+#1291 = CARTESIAN_POINT('',(-2.49,0.375,0.2));
+#1292 = LINE('',#1293,#1294);
+#1293 = CARTESIAN_POINT('',(-2.49,0.375,1.E-002));
+#1294 = VECTOR('',#1295,1.);
+#1295 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1296 = ORIENTED_EDGE('',*,*,#1297,.T.);
+#1297 = EDGE_CURVE('',#1290,#1298,#1300,.T.);
+#1298 = VERTEX_POINT('',#1299);
+#1299 = CARTESIAN_POINT('',(-2.49,0.625,0.2));
+#1300 = LINE('',#1301,#1302);
+#1301 = CARTESIAN_POINT('',(-2.49,1.4325,0.2));
+#1302 = VECTOR('',#1303,1.);
+#1303 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1304 = ORIENTED_EDGE('',*,*,#1305,.T.);
+#1305 = EDGE_CURVE('',#1298,#244,#1306,.T.);
+#1306 = LINE('',#1307,#1308);
+#1307 = CARTESIAN_POINT('',(-2.49,0.625,1.E-002));
+#1308 = VECTOR('',#1309,1.);
+#1309 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1310 = ORIENTED_EDGE('',*,*,#243,.F.);
+#1311 = ORIENTED_EDGE('',*,*,#79,.T.);
+#1312 = ORIENTED_EDGE('',*,*,#1313,.T.);
+#1313 = EDGE_CURVE('',#72,#145,#1314,.T.);
+#1314 = LINE('',#1315,#1316);
+#1315 = CARTESIAN_POINT('',(-2.49,1.6825,0.2));
+#1316 = VECTOR('',#1317,1.);
+#1317 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1318 = ORIENTED_EDGE('',*,*,#144,.T.);
+#1319 = ORIENTED_EDGE('',*,*,#234,.F.);
+#1320 = ORIENTED_EDGE('',*,*,#1321,.T.);
+#1321 = EDGE_CURVE('',#227,#1322,#1324,.T.);
+#1322 = VERTEX_POINT('',#1323);
+#1323 = CARTESIAN_POINT('',(-2.49,1.375,0.2));
+#1324 = LINE('',#1325,#1326);
+#1325 = CARTESIAN_POINT('',(-2.49,1.375,1.E-002));
+#1326 = VECTOR('',#1327,1.);
+#1327 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1328 = ORIENTED_EDGE('',*,*,#1329,.T.);
+#1329 = EDGE_CURVE('',#1322,#1330,#1332,.T.);
+#1330 = VERTEX_POINT('',#1331);
+#1331 = CARTESIAN_POINT('',(-2.49,1.625,0.2));
+#1332 = LINE('',#1333,#1334);
+#1333 = CARTESIAN_POINT('',(-2.49,1.9325,0.2));
+#1334 = VECTOR('',#1335,1.);
+#1335 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#1336 = ORIENTED_EDGE('',*,*,#1337,.T.);
+#1337 = EDGE_CURVE('',#1330,#202,#1338,.T.);
+#1338 = LINE('',#1339,#1340);
+#1339 = CARTESIAN_POINT('',(-2.49,1.625,1.E-002));
+#1340 = VECTOR('',#1341,1.);
+#1341 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1342 = PLANE('',#1343);
+#1343 = AXIS2_PLACEMENT_3D('',#1344,#1345,#1346);
+#1344 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1345 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1346 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1347 = ADVANCED_FACE('',(#1348),#1354,.F.);
+#1348 = FACE_BOUND('',#1349,.F.);
+#1349 = EDGE_LOOP('',(#1350,#1351,#1352,#1353));
+#1350 = ORIENTED_EDGE('',*,*,#71,.F.);
+#1351 = ORIENTED_EDGE('',*,*,#175,.F.);
+#1352 = ORIENTED_EDGE('',*,*,#152,.F.);
+#1353 = ORIENTED_EDGE('',*,*,#1313,.F.);
+#1354 = PLANE('',#1355);
+#1355 = AXIS2_PLACEMENT_3D('',#1356,#1357,#1358);
+#1356 = CARTESIAN_POINT('',(-2.5,0.875,0.2));
+#1357 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#1358 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#1359 = ADVANCED_FACE('',(#1360),#1539,.F.);
+#1360 = FACE_BOUND('',#1361,.F.);
+#1361 = EDGE_LOOP('',(#1362,#1370,#1371,#1372,#1380,#1388,#1394,#1395,
+#1403,#1411,#1417,#1418,#1426,#1434,#1440,#1441,#1449,#1457,#1463,
+#1464,#1472,#1480,#1486,#1487,#1495,#1503,#1509,#1510,#1518,#1526,
+#1532,#1533));
+#1362 = ORIENTED_EDGE('',*,*,#1363,.F.);
+#1363 = EDGE_CURVE('',#1175,#1364,#1366,.T.);
+#1364 = VERTEX_POINT('',#1365);
+#1365 = CARTESIAN_POINT('',(2.49,2.49,0.92));
+#1366 = LINE('',#1367,#1368);
+#1367 = CARTESIAN_POINT('',(-2.49,2.49,0.92));
+#1368 = VECTOR('',#1369,1.);
+#1369 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1370 = ORIENTED_EDGE('',*,*,#1174,.F.);
+#1371 = ORIENTED_EDGE('',*,*,#191,.T.);
+#1372 = ORIENTED_EDGE('',*,*,#1373,.T.);
+#1373 = EDGE_CURVE('',#194,#1374,#1376,.T.);
+#1374 = VERTEX_POINT('',#1375);
+#1375 = CARTESIAN_POINT('',(-1.625,2.49,0.2));
+#1376 = LINE('',#1377,#1378);
+#1377 = CARTESIAN_POINT('',(-1.625,2.49,1.E-002));
+#1378 = VECTOR('',#1379,1.);
+#1379 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1380 = ORIENTED_EDGE('',*,*,#1381,.T.);
+#1381 = EDGE_CURVE('',#1374,#1382,#1384,.T.);
+#1382 = VERTEX_POINT('',#1383);
+#1383 = CARTESIAN_POINT('',(-1.375,2.49,0.2));
+#1384 = LINE('',#1385,#1386);
+#1385 = CARTESIAN_POINT('',(-2.0575,2.49,0.2));
+#1386 = VECTOR('',#1387,1.);
+#1387 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1388 = ORIENTED_EDGE('',*,*,#1389,.T.);
+#1389 = EDGE_CURVE('',#1382,#1093,#1390,.T.);
+#1390 = LINE('',#1391,#1392);
+#1391 = CARTESIAN_POINT('',(-1.375,2.49,1.E-002));
+#1392 = VECTOR('',#1393,1.);
+#1393 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1394 = ORIENTED_EDGE('',*,*,#1092,.T.);
+#1395 = ORIENTED_EDGE('',*,*,#1396,.T.);
+#1396 = EDGE_CURVE('',#1085,#1397,#1399,.T.);
+#1397 = VERTEX_POINT('',#1398);
+#1398 = CARTESIAN_POINT('',(-1.125,2.49,0.2));
+#1399 = LINE('',#1400,#1401);
+#1400 = CARTESIAN_POINT('',(-1.125,2.49,1.E-002));
+#1401 = VECTOR('',#1402,1.);
+#1402 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1403 = ORIENTED_EDGE('',*,*,#1404,.T.);
+#1404 = EDGE_CURVE('',#1397,#1405,#1407,.T.);
+#1405 = VERTEX_POINT('',#1406);
+#1406 = CARTESIAN_POINT('',(-0.875,2.49,0.2));
+#1407 = LINE('',#1408,#1409);
+#1408 = CARTESIAN_POINT('',(-1.8075,2.49,0.2));
+#1409 = VECTOR('',#1410,1.);
+#1410 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1411 = ORIENTED_EDGE('',*,*,#1412,.T.);
+#1412 = EDGE_CURVE('',#1405,#1060,#1413,.T.);
+#1413 = LINE('',#1414,#1415);
+#1414 = CARTESIAN_POINT('',(-0.875,2.49,1.E-002));
+#1415 = VECTOR('',#1416,1.);
+#1416 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1417 = ORIENTED_EDGE('',*,*,#1059,.T.);
+#1418 = ORIENTED_EDGE('',*,*,#1419,.T.);
+#1419 = EDGE_CURVE('',#1052,#1420,#1422,.T.);
+#1420 = VERTEX_POINT('',#1421);
+#1421 = CARTESIAN_POINT('',(-0.625,2.49,0.2));
+#1422 = LINE('',#1423,#1424);
+#1423 = CARTESIAN_POINT('',(-0.625,2.49,1.E-002));
+#1424 = VECTOR('',#1425,1.);
+#1425 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1426 = ORIENTED_EDGE('',*,*,#1427,.T.);
+#1427 = EDGE_CURVE('',#1420,#1428,#1430,.T.);
+#1428 = VERTEX_POINT('',#1429);
+#1429 = CARTESIAN_POINT('',(-0.375,2.49,0.2));
+#1430 = LINE('',#1431,#1432);
+#1431 = CARTESIAN_POINT('',(-1.5575,2.49,0.2));
+#1432 = VECTOR('',#1433,1.);
+#1433 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1434 = ORIENTED_EDGE('',*,*,#1435,.T.);
+#1435 = EDGE_CURVE('',#1428,#1027,#1436,.T.);
+#1436 = LINE('',#1437,#1438);
+#1437 = CARTESIAN_POINT('',(-0.375,2.49,1.E-002));
+#1438 = VECTOR('',#1439,1.);
+#1439 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1440 = ORIENTED_EDGE('',*,*,#1026,.T.);
+#1441 = ORIENTED_EDGE('',*,*,#1442,.T.);
+#1442 = EDGE_CURVE('',#1019,#1443,#1445,.T.);
+#1443 = VERTEX_POINT('',#1444);
+#1444 = CARTESIAN_POINT('',(-0.125,2.49,0.2));
+#1445 = LINE('',#1446,#1447);
+#1446 = CARTESIAN_POINT('',(-0.125,2.49,1.E-002));
+#1447 = VECTOR('',#1448,1.);
+#1448 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1449 = ORIENTED_EDGE('',*,*,#1450,.T.);
+#1450 = EDGE_CURVE('',#1443,#1451,#1453,.T.);
+#1451 = VERTEX_POINT('',#1452);
+#1452 = CARTESIAN_POINT('',(0.125,2.49,0.2));
+#1453 = LINE('',#1454,#1455);
+#1454 = CARTESIAN_POINT('',(-1.3075,2.49,0.2));
+#1455 = VECTOR('',#1456,1.);
+#1456 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1457 = ORIENTED_EDGE('',*,*,#1458,.T.);
+#1458 = EDGE_CURVE('',#1451,#994,#1459,.T.);
+#1459 = LINE('',#1460,#1461);
+#1460 = CARTESIAN_POINT('',(0.125,2.49,1.E-002));
+#1461 = VECTOR('',#1462,1.);
+#1462 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1463 = ORIENTED_EDGE('',*,*,#993,.T.);
+#1464 = ORIENTED_EDGE('',*,*,#1465,.T.);
+#1465 = EDGE_CURVE('',#986,#1466,#1468,.T.);
+#1466 = VERTEX_POINT('',#1467);
+#1467 = CARTESIAN_POINT('',(0.375,2.49,0.2));
+#1468 = LINE('',#1469,#1470);
+#1469 = CARTESIAN_POINT('',(0.375,2.49,1.E-002));
+#1470 = VECTOR('',#1471,1.);
+#1471 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1472 = ORIENTED_EDGE('',*,*,#1473,.T.);
+#1473 = EDGE_CURVE('',#1466,#1474,#1476,.T.);
+#1474 = VERTEX_POINT('',#1475);
+#1475 = CARTESIAN_POINT('',(0.625,2.49,0.2));
+#1476 = LINE('',#1477,#1478);
+#1477 = CARTESIAN_POINT('',(-1.0575,2.49,0.2));
+#1478 = VECTOR('',#1479,1.);
+#1479 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1480 = ORIENTED_EDGE('',*,*,#1481,.T.);
+#1481 = EDGE_CURVE('',#1474,#961,#1482,.T.);
+#1482 = LINE('',#1483,#1484);
+#1483 = CARTESIAN_POINT('',(0.625,2.49,1.E-002));
+#1484 = VECTOR('',#1485,1.);
+#1485 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1486 = ORIENTED_EDGE('',*,*,#960,.T.);
+#1487 = ORIENTED_EDGE('',*,*,#1488,.T.);
+#1488 = EDGE_CURVE('',#953,#1489,#1491,.T.);
+#1489 = VERTEX_POINT('',#1490);
+#1490 = CARTESIAN_POINT('',(0.875,2.49,0.2));
+#1491 = LINE('',#1492,#1493);
+#1492 = CARTESIAN_POINT('',(0.875,2.49,1.E-002));
+#1493 = VECTOR('',#1494,1.);
+#1494 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1495 = ORIENTED_EDGE('',*,*,#1496,.T.);
+#1496 = EDGE_CURVE('',#1489,#1497,#1499,.T.);
+#1497 = VERTEX_POINT('',#1498);
+#1498 = CARTESIAN_POINT('',(1.125,2.49,0.2));
+#1499 = LINE('',#1500,#1501);
+#1500 = CARTESIAN_POINT('',(-0.8075,2.49,0.2));
+#1501 = VECTOR('',#1502,1.);
+#1502 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1503 = ORIENTED_EDGE('',*,*,#1504,.T.);
+#1504 = EDGE_CURVE('',#1497,#928,#1505,.T.);
+#1505 = LINE('',#1506,#1507);
+#1506 = CARTESIAN_POINT('',(1.125,2.49,1.E-002));
+#1507 = VECTOR('',#1508,1.);
+#1508 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1509 = ORIENTED_EDGE('',*,*,#927,.T.);
+#1510 = ORIENTED_EDGE('',*,*,#1511,.T.);
+#1511 = EDGE_CURVE('',#920,#1512,#1514,.T.);
+#1512 = VERTEX_POINT('',#1513);
+#1513 = CARTESIAN_POINT('',(1.375,2.49,0.2));
+#1514 = LINE('',#1515,#1516);
+#1515 = CARTESIAN_POINT('',(1.375,2.49,1.E-002));
+#1516 = VECTOR('',#1517,1.);
+#1517 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1518 = ORIENTED_EDGE('',*,*,#1519,.T.);
+#1519 = EDGE_CURVE('',#1512,#1520,#1522,.T.);
+#1520 = VERTEX_POINT('',#1521);
+#1521 = CARTESIAN_POINT('',(1.625,2.49,0.2));
+#1522 = LINE('',#1523,#1524);
+#1523 = CARTESIAN_POINT('',(-0.5575,2.49,0.2));
+#1524 = VECTOR('',#1525,1.);
+#1525 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#1526 = ORIENTED_EDGE('',*,*,#1527,.T.);
+#1527 = EDGE_CURVE('',#1520,#895,#1528,.T.);
+#1528 = LINE('',#1529,#1530);
+#1529 = CARTESIAN_POINT('',(1.625,2.49,1.E-002));
+#1530 = VECTOR('',#1531,1.);
+#1531 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#1532 = ORIENTED_EDGE('',*,*,#894,.T.);
+#1533 = ORIENTED_EDGE('',*,*,#1534,.T.);
+#1534 = EDGE_CURVE('',#887,#1364,#1535,.T.);
+#1535 = LINE('',#1536,#1537);
+#1536 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#1537 = VECTOR('',#1538,1.);
+#1538 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1539 = PLANE('',#1540);
+#1540 = AXIS2_PLACEMENT_3D('',#1541,#1542,#1543);
+#1541 = CARTESIAN_POINT('',(-2.49,2.49,2.E-002));
+#1542 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#1543 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1544 = ADVANCED_FACE('',(#1545),#1579,.F.);
+#1545 = FACE_BOUND('',#1546,.F.);
+#1546 = EDGE_LOOP('',(#1547,#1557,#1565,#1571,#1572,#1573));
+#1547 = ORIENTED_EDGE('',*,*,#1548,.F.);
+#1548 = EDGE_CURVE('',#1549,#1551,#1553,.T.);
+#1549 = VERTEX_POINT('',#1550);
+#1550 = CARTESIAN_POINT('',(-1.625,2.5,0.E+000));
+#1551 = VERTEX_POINT('',#1552);
+#1552 = CARTESIAN_POINT('',(-1.625,2.225,0.E+000));
+#1553 = LINE('',#1554,#1555);
+#1554 = CARTESIAN_POINT('',(-1.625,2.5,0.E+000));
+#1555 = VECTOR('',#1556,1.);
+#1556 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1557 = ORIENTED_EDGE('',*,*,#1558,.T.);
+#1558 = EDGE_CURVE('',#1549,#1559,#1561,.T.);
+#1559 = VERTEX_POINT('',#1560);
+#1560 = CARTESIAN_POINT('',(-1.625,2.5,0.2));
+#1561 = LINE('',#1562,#1563);
+#1562 = CARTESIAN_POINT('',(-1.625,2.5,0.E+000));
+#1563 = VECTOR('',#1564,1.);
+#1564 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1565 = ORIENTED_EDGE('',*,*,#1566,.T.);
+#1566 = EDGE_CURVE('',#1559,#1374,#1567,.T.);
+#1567 = LINE('',#1568,#1569);
+#1568 = CARTESIAN_POINT('',(-1.625,2.5,0.2));
+#1569 = VECTOR('',#1570,1.);
+#1570 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1571 = ORIENTED_EDGE('',*,*,#1373,.F.);
+#1572 = ORIENTED_EDGE('',*,*,#1117,.F.);
+#1573 = ORIENTED_EDGE('',*,*,#1574,.F.);
+#1574 = EDGE_CURVE('',#1551,#1109,#1575,.T.);
+#1575 = LINE('',#1576,#1577);
+#1576 = CARTESIAN_POINT('',(-1.625,2.225,0.E+000));
+#1577 = VECTOR('',#1578,1.);
+#1578 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1579 = PLANE('',#1580);
+#1580 = AXIS2_PLACEMENT_3D('',#1581,#1582,#1583);
+#1581 = CARTESIAN_POINT('',(-1.625,2.5,0.E+000));
+#1582 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#1583 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1584 = ADVANCED_FACE('',(#1585),#1619,.F.);
+#1585 = FACE_BOUND('',#1586,.F.);
+#1586 = EDGE_LOOP('',(#1587,#1597,#1603,#1604,#1605,#1613));
+#1587 = ORIENTED_EDGE('',*,*,#1588,.F.);
+#1588 = EDGE_CURVE('',#1589,#1591,#1593,.T.);
+#1589 = VERTEX_POINT('',#1590);
+#1590 = CARTESIAN_POINT('',(-2.225,1.625,0.E+000));
+#1591 = VERTEX_POINT('',#1592);
+#1592 = CARTESIAN_POINT('',(-2.5,1.625,0.E+000));
+#1593 = LINE('',#1594,#1595);
+#1594 = CARTESIAN_POINT('',(-2.225,1.625,0.E+000));
+#1595 = VECTOR('',#1596,1.);
+#1596 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1597 = ORIENTED_EDGE('',*,*,#1598,.T.);
+#1598 = EDGE_CURVE('',#1589,#210,#1599,.T.);
+#1599 = LINE('',#1600,#1601);
+#1600 = CARTESIAN_POINT('',(-2.225,1.625,0.E+000));
+#1601 = VECTOR('',#1602,1.);
+#1602 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1603 = ORIENTED_EDGE('',*,*,#209,.F.);
+#1604 = ORIENTED_EDGE('',*,*,#1337,.F.);
+#1605 = ORIENTED_EDGE('',*,*,#1606,.T.);
+#1606 = EDGE_CURVE('',#1330,#1607,#1609,.T.);
+#1607 = VERTEX_POINT('',#1608);
+#1608 = CARTESIAN_POINT('',(-2.5,1.625,0.2));
+#1609 = LINE('',#1610,#1611);
+#1610 = CARTESIAN_POINT('',(-2.225,1.625,0.2));
+#1611 = VECTOR('',#1612,1.);
+#1612 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1613 = ORIENTED_EDGE('',*,*,#1614,.F.);
+#1614 = EDGE_CURVE('',#1591,#1607,#1615,.T.);
+#1615 = LINE('',#1616,#1617);
+#1616 = CARTESIAN_POINT('',(-2.5,1.625,0.E+000));
+#1617 = VECTOR('',#1618,1.);
+#1618 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1619 = PLANE('',#1620);
+#1620 = AXIS2_PLACEMENT_3D('',#1621,#1622,#1623);
+#1621 = CARTESIAN_POINT('',(-2.225,1.625,0.E+000));
+#1622 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1623 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1624 = ADVANCED_FACE('',(#1625),#1644,.T.);
+#1625 = FACE_BOUND('',#1626,.F.);
+#1626 = EDGE_LOOP('',(#1627,#1636,#1637,#1638));
+#1627 = ORIENTED_EDGE('',*,*,#1628,.F.);
+#1628 = EDGE_CURVE('',#1551,#1629,#1631,.T.);
+#1629 = VERTEX_POINT('',#1630);
+#1630 = CARTESIAN_POINT('',(-1.375,2.225,0.E+000));
+#1631 = CIRCLE('',#1632,0.125);
+#1632 = AXIS2_PLACEMENT_3D('',#1633,#1634,#1635);
+#1633 = CARTESIAN_POINT('',(-1.5,2.225,0.E+000));
+#1634 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1635 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1636 = ORIENTED_EDGE('',*,*,#1574,.T.);
+#1637 = ORIENTED_EDGE('',*,*,#1108,.F.);
+#1638 = ORIENTED_EDGE('',*,*,#1639,.F.);
+#1639 = EDGE_CURVE('',#1629,#1101,#1640,.T.);
+#1640 = LINE('',#1641,#1642);
+#1641 = CARTESIAN_POINT('',(-1.375,2.225,0.E+000));
+#1642 = VECTOR('',#1643,1.);
+#1643 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1644 = CYLINDRICAL_SURFACE('',#1645,0.125);
+#1645 = AXIS2_PLACEMENT_3D('',#1646,#1647,#1648);
+#1646 = CARTESIAN_POINT('',(-1.5,2.225,0.E+000));
+#1647 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1648 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1649 = ADVANCED_FACE('',(#1650),#1669,.T.);
+#1650 = FACE_BOUND('',#1651,.F.);
+#1651 = EDGE_LOOP('',(#1652,#1661,#1667,#1668));
+#1652 = ORIENTED_EDGE('',*,*,#1653,.F.);
+#1653 = EDGE_CURVE('',#1654,#1589,#1656,.T.);
+#1654 = VERTEX_POINT('',#1655);
+#1655 = CARTESIAN_POINT('',(-2.225,1.375,0.E+000));
+#1656 = CIRCLE('',#1657,0.125);
+#1657 = AXIS2_PLACEMENT_3D('',#1658,#1659,#1660);
+#1658 = CARTESIAN_POINT('',(-2.225,1.5,0.E+000));
+#1659 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1660 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1661 = ORIENTED_EDGE('',*,*,#1662,.T.);
+#1662 = EDGE_CURVE('',#1654,#218,#1663,.T.);
+#1663 = LINE('',#1664,#1665);
+#1664 = CARTESIAN_POINT('',(-2.225,1.375,0.E+000));
+#1665 = VECTOR('',#1666,1.);
+#1666 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1667 = ORIENTED_EDGE('',*,*,#217,.F.);
+#1668 = ORIENTED_EDGE('',*,*,#1598,.F.);
+#1669 = CYLINDRICAL_SURFACE('',#1670,0.125);
+#1670 = AXIS2_PLACEMENT_3D('',#1671,#1672,#1673);
+#1671 = CARTESIAN_POINT('',(-2.225,1.5,0.E+000));
+#1672 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1673 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1674 = ADVANCED_FACE('',(#1675),#1702,.F.);
+#1675 = FACE_BOUND('',#1676,.F.);
+#1676 = EDGE_LOOP('',(#1677,#1685,#1686,#1687,#1688,#1696));
+#1677 = ORIENTED_EDGE('',*,*,#1678,.F.);
+#1678 = EDGE_CURVE('',#1629,#1679,#1681,.T.);
+#1679 = VERTEX_POINT('',#1680);
+#1680 = CARTESIAN_POINT('',(-1.375,2.5,0.E+000));
+#1681 = LINE('',#1682,#1683);
+#1682 = CARTESIAN_POINT('',(-1.375,2.225,0.E+000));
+#1683 = VECTOR('',#1684,1.);
+#1684 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1685 = ORIENTED_EDGE('',*,*,#1639,.T.);
+#1686 = ORIENTED_EDGE('',*,*,#1100,.F.);
+#1687 = ORIENTED_EDGE('',*,*,#1389,.F.);
+#1688 = ORIENTED_EDGE('',*,*,#1689,.T.);
+#1689 = EDGE_CURVE('',#1382,#1690,#1692,.T.);
+#1690 = VERTEX_POINT('',#1691);
+#1691 = CARTESIAN_POINT('',(-1.375,2.5,0.2));
+#1692 = LINE('',#1693,#1694);
+#1693 = CARTESIAN_POINT('',(-1.375,2.225,0.2));
+#1694 = VECTOR('',#1695,1.);
+#1695 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1696 = ORIENTED_EDGE('',*,*,#1697,.F.);
+#1697 = EDGE_CURVE('',#1679,#1690,#1698,.T.);
+#1698 = LINE('',#1699,#1700);
+#1699 = CARTESIAN_POINT('',(-1.375,2.5,0.E+000));
+#1700 = VECTOR('',#1701,1.);
+#1701 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1702 = PLANE('',#1703);
+#1703 = AXIS2_PLACEMENT_3D('',#1704,#1705,#1706);
+#1704 = CARTESIAN_POINT('',(-1.375,2.225,0.E+000));
+#1705 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1706 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1707 = ADVANCED_FACE('',(#1708),#1735,.F.);
+#1708 = FACE_BOUND('',#1709,.F.);
+#1709 = EDGE_LOOP('',(#1710,#1718,#1726,#1732,#1733,#1734));
+#1710 = ORIENTED_EDGE('',*,*,#1711,.F.);
+#1711 = EDGE_CURVE('',#1712,#1654,#1714,.T.);
+#1712 = VERTEX_POINT('',#1713);
+#1713 = CARTESIAN_POINT('',(-2.5,1.375,0.E+000));
+#1714 = LINE('',#1715,#1716);
+#1715 = CARTESIAN_POINT('',(-2.5,1.375,0.E+000));
+#1716 = VECTOR('',#1717,1.);
+#1717 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#1718 = ORIENTED_EDGE('',*,*,#1719,.T.);
+#1719 = EDGE_CURVE('',#1712,#1720,#1722,.T.);
+#1720 = VERTEX_POINT('',#1721);
+#1721 = CARTESIAN_POINT('',(-2.5,1.375,0.2));
+#1722 = LINE('',#1723,#1724);
+#1723 = CARTESIAN_POINT('',(-2.5,1.375,0.E+000));
+#1724 = VECTOR('',#1725,1.);
+#1725 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1726 = ORIENTED_EDGE('',*,*,#1727,.T.);
+#1727 = EDGE_CURVE('',#1720,#1322,#1728,.T.);
+#1728 = LINE('',#1729,#1730);
+#1729 = CARTESIAN_POINT('',(-2.5,1.375,0.2));
+#1730 = VECTOR('',#1731,1.);
+#1731 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#1732 = ORIENTED_EDGE('',*,*,#1321,.F.);
+#1733 = ORIENTED_EDGE('',*,*,#226,.F.);
+#1734 = ORIENTED_EDGE('',*,*,#1662,.F.);
+#1735 = PLANE('',#1736);
+#1736 = AXIS2_PLACEMENT_3D('',#1737,#1738,#1739);
+#1737 = CARTESIAN_POINT('',(-2.5,1.375,0.E+000));
+#1738 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#1739 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#1740 = ADVANCED_FACE('',(#1741),#1775,.F.);
+#1741 = FACE_BOUND('',#1742,.F.);
+#1742 = EDGE_LOOP('',(#1743,#1753,#1761,#1767,#1768,#1769));
+#1743 = ORIENTED_EDGE('',*,*,#1744,.F.);
+#1744 = EDGE_CURVE('',#1745,#1747,#1749,.T.);
+#1745 = VERTEX_POINT('',#1746);
+#1746 = CARTESIAN_POINT('',(-1.125,2.5,0.E+000));
+#1747 = VERTEX_POINT('',#1748);
+#1748 = CARTESIAN_POINT('',(-1.125,2.225,0.E+000));
+#1749 = LINE('',#1750,#1751);
+#1750 = CARTESIAN_POINT('',(-1.125,2.5,0.E+000));
+#1751 = VECTOR('',#1752,1.);
+#1752 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1753 = ORIENTED_EDGE('',*,*,#1754,.T.);
+#1754 = EDGE_CURVE('',#1745,#1755,#1757,.T.);
+#1755 = VERTEX_POINT('',#1756);
+#1756 = CARTESIAN_POINT('',(-1.125,2.5,0.2));
+#1757 = LINE('',#1758,#1759);
+#1758 = CARTESIAN_POINT('',(-1.125,2.5,0.E+000));
+#1759 = VECTOR('',#1760,1.);
+#1760 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1761 = ORIENTED_EDGE('',*,*,#1762,.T.);
+#1762 = EDGE_CURVE('',#1755,#1397,#1763,.T.);
+#1763 = LINE('',#1764,#1765);
+#1764 = CARTESIAN_POINT('',(-1.125,2.5,0.2));
+#1765 = VECTOR('',#1766,1.);
+#1766 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1767 = ORIENTED_EDGE('',*,*,#1396,.F.);
+#1768 = ORIENTED_EDGE('',*,*,#1084,.F.);
+#1769 = ORIENTED_EDGE('',*,*,#1770,.F.);
+#1770 = EDGE_CURVE('',#1747,#1076,#1771,.T.);
+#1771 = LINE('',#1772,#1773);
+#1772 = CARTESIAN_POINT('',(-1.125,2.225,0.E+000));
+#1773 = VECTOR('',#1774,1.);
+#1774 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1775 = PLANE('',#1776);
+#1776 = AXIS2_PLACEMENT_3D('',#1777,#1778,#1779);
+#1777 = CARTESIAN_POINT('',(-1.125,2.5,0.E+000));
+#1778 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#1779 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1780 = ADVANCED_FACE('',(#1781),#1800,.T.);
+#1781 = FACE_BOUND('',#1782,.F.);
+#1782 = EDGE_LOOP('',(#1783,#1792,#1793,#1794));
+#1783 = ORIENTED_EDGE('',*,*,#1784,.F.);
+#1784 = EDGE_CURVE('',#1747,#1785,#1787,.T.);
+#1785 = VERTEX_POINT('',#1786);
+#1786 = CARTESIAN_POINT('',(-0.875,2.225,0.E+000));
+#1787 = CIRCLE('',#1788,0.125);
+#1788 = AXIS2_PLACEMENT_3D('',#1789,#1790,#1791);
+#1789 = CARTESIAN_POINT('',(-1.,2.225,0.E+000));
+#1790 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1791 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1792 = ORIENTED_EDGE('',*,*,#1770,.T.);
+#1793 = ORIENTED_EDGE('',*,*,#1075,.F.);
+#1794 = ORIENTED_EDGE('',*,*,#1795,.F.);
+#1795 = EDGE_CURVE('',#1785,#1068,#1796,.T.);
+#1796 = LINE('',#1797,#1798);
+#1797 = CARTESIAN_POINT('',(-0.875,2.225,0.E+000));
+#1798 = VECTOR('',#1799,1.);
+#1799 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1800 = CYLINDRICAL_SURFACE('',#1801,0.125);
+#1801 = AXIS2_PLACEMENT_3D('',#1802,#1803,#1804);
+#1802 = CARTESIAN_POINT('',(-1.,2.225,0.E+000));
+#1803 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1804 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1805 = ADVANCED_FACE('',(#1806),#1833,.F.);
+#1806 = FACE_BOUND('',#1807,.F.);
+#1807 = EDGE_LOOP('',(#1808,#1816,#1817,#1818,#1819,#1827));
+#1808 = ORIENTED_EDGE('',*,*,#1809,.F.);
+#1809 = EDGE_CURVE('',#1785,#1810,#1812,.T.);
+#1810 = VERTEX_POINT('',#1811);
+#1811 = CARTESIAN_POINT('',(-0.875,2.5,0.E+000));
+#1812 = LINE('',#1813,#1814);
+#1813 = CARTESIAN_POINT('',(-0.875,2.225,0.E+000));
+#1814 = VECTOR('',#1815,1.);
+#1815 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1816 = ORIENTED_EDGE('',*,*,#1795,.T.);
+#1817 = ORIENTED_EDGE('',*,*,#1067,.F.);
+#1818 = ORIENTED_EDGE('',*,*,#1412,.F.);
+#1819 = ORIENTED_EDGE('',*,*,#1820,.T.);
+#1820 = EDGE_CURVE('',#1405,#1821,#1823,.T.);
+#1821 = VERTEX_POINT('',#1822);
+#1822 = CARTESIAN_POINT('',(-0.875,2.5,0.2));
+#1823 = LINE('',#1824,#1825);
+#1824 = CARTESIAN_POINT('',(-0.875,2.225,0.2));
+#1825 = VECTOR('',#1826,1.);
+#1826 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1827 = ORIENTED_EDGE('',*,*,#1828,.F.);
+#1828 = EDGE_CURVE('',#1810,#1821,#1829,.T.);
+#1829 = LINE('',#1830,#1831);
+#1830 = CARTESIAN_POINT('',(-0.875,2.5,0.E+000));
+#1831 = VECTOR('',#1832,1.);
+#1832 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1833 = PLANE('',#1834);
+#1834 = AXIS2_PLACEMENT_3D('',#1835,#1836,#1837);
+#1835 = CARTESIAN_POINT('',(-0.875,2.225,0.E+000));
+#1836 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1837 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1838 = ADVANCED_FACE('',(#1839),#1873,.F.);
+#1839 = FACE_BOUND('',#1840,.F.);
+#1840 = EDGE_LOOP('',(#1841,#1851,#1859,#1865,#1866,#1867));
+#1841 = ORIENTED_EDGE('',*,*,#1842,.F.);
+#1842 = EDGE_CURVE('',#1843,#1845,#1847,.T.);
+#1843 = VERTEX_POINT('',#1844);
+#1844 = CARTESIAN_POINT('',(-0.625,2.5,0.E+000));
+#1845 = VERTEX_POINT('',#1846);
+#1846 = CARTESIAN_POINT('',(-0.625,2.225,0.E+000));
+#1847 = LINE('',#1848,#1849);
+#1848 = CARTESIAN_POINT('',(-0.625,2.5,0.E+000));
+#1849 = VECTOR('',#1850,1.);
+#1850 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1851 = ORIENTED_EDGE('',*,*,#1852,.T.);
+#1852 = EDGE_CURVE('',#1843,#1853,#1855,.T.);
+#1853 = VERTEX_POINT('',#1854);
+#1854 = CARTESIAN_POINT('',(-0.625,2.5,0.2));
+#1855 = LINE('',#1856,#1857);
+#1856 = CARTESIAN_POINT('',(-0.625,2.5,0.E+000));
+#1857 = VECTOR('',#1858,1.);
+#1858 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1859 = ORIENTED_EDGE('',*,*,#1860,.T.);
+#1860 = EDGE_CURVE('',#1853,#1420,#1861,.T.);
+#1861 = LINE('',#1862,#1863);
+#1862 = CARTESIAN_POINT('',(-0.625,2.5,0.2));
+#1863 = VECTOR('',#1864,1.);
+#1864 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1865 = ORIENTED_EDGE('',*,*,#1419,.F.);
+#1866 = ORIENTED_EDGE('',*,*,#1051,.F.);
+#1867 = ORIENTED_EDGE('',*,*,#1868,.F.);
+#1868 = EDGE_CURVE('',#1845,#1043,#1869,.T.);
+#1869 = LINE('',#1870,#1871);
+#1870 = CARTESIAN_POINT('',(-0.625,2.225,0.E+000));
+#1871 = VECTOR('',#1872,1.);
+#1872 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1873 = PLANE('',#1874);
+#1874 = AXIS2_PLACEMENT_3D('',#1875,#1876,#1877);
+#1875 = CARTESIAN_POINT('',(-0.625,2.5,0.E+000));
+#1876 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#1877 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#1878 = ADVANCED_FACE('',(#1879),#1913,.F.);
+#1879 = FACE_BOUND('',#1880,.F.);
+#1880 = EDGE_LOOP('',(#1881,#1891,#1897,#1898,#1899,#1907));
+#1881 = ORIENTED_EDGE('',*,*,#1882,.F.);
+#1882 = EDGE_CURVE('',#1883,#1885,#1887,.T.);
+#1883 = VERTEX_POINT('',#1884);
+#1884 = CARTESIAN_POINT('',(-2.225,0.625,0.E+000));
+#1885 = VERTEX_POINT('',#1886);
+#1886 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000));
+#1887 = LINE('',#1888,#1889);
+#1888 = CARTESIAN_POINT('',(-2.225,0.625,0.E+000));
+#1889 = VECTOR('',#1890,1.);
+#1890 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1891 = ORIENTED_EDGE('',*,*,#1892,.T.);
+#1892 = EDGE_CURVE('',#1883,#252,#1893,.T.);
+#1893 = LINE('',#1894,#1895);
+#1894 = CARTESIAN_POINT('',(-2.225,0.625,0.E+000));
+#1895 = VECTOR('',#1896,1.);
+#1896 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1897 = ORIENTED_EDGE('',*,*,#251,.F.);
+#1898 = ORIENTED_EDGE('',*,*,#1305,.F.);
+#1899 = ORIENTED_EDGE('',*,*,#1900,.T.);
+#1900 = EDGE_CURVE('',#1298,#1901,#1903,.T.);
+#1901 = VERTEX_POINT('',#1902);
+#1902 = CARTESIAN_POINT('',(-2.5,0.625,0.2));
+#1903 = LINE('',#1904,#1905);
+#1904 = CARTESIAN_POINT('',(-2.225,0.625,0.2));
+#1905 = VECTOR('',#1906,1.);
+#1906 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1907 = ORIENTED_EDGE('',*,*,#1908,.F.);
+#1908 = EDGE_CURVE('',#1885,#1901,#1909,.T.);
+#1909 = LINE('',#1910,#1911);
+#1910 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000));
+#1911 = VECTOR('',#1912,1.);
+#1912 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1913 = PLANE('',#1914);
+#1914 = AXIS2_PLACEMENT_3D('',#1915,#1916,#1917);
+#1915 = CARTESIAN_POINT('',(-2.225,0.625,0.E+000));
+#1916 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1917 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#1918 = ADVANCED_FACE('',(#1919),#1938,.T.);
+#1919 = FACE_BOUND('',#1920,.F.);
+#1920 = EDGE_LOOP('',(#1921,#1930,#1931,#1932));
+#1921 = ORIENTED_EDGE('',*,*,#1922,.F.);
+#1922 = EDGE_CURVE('',#1845,#1923,#1925,.T.);
+#1923 = VERTEX_POINT('',#1924);
+#1924 = CARTESIAN_POINT('',(-0.375,2.225,0.E+000));
+#1925 = CIRCLE('',#1926,0.125);
+#1926 = AXIS2_PLACEMENT_3D('',#1927,#1928,#1929);
+#1927 = CARTESIAN_POINT('',(-0.5,2.225,0.E+000));
+#1928 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1929 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1930 = ORIENTED_EDGE('',*,*,#1868,.T.);
+#1931 = ORIENTED_EDGE('',*,*,#1042,.F.);
+#1932 = ORIENTED_EDGE('',*,*,#1933,.F.);
+#1933 = EDGE_CURVE('',#1923,#1035,#1934,.T.);
+#1934 = LINE('',#1935,#1936);
+#1935 = CARTESIAN_POINT('',(-0.375,2.225,0.E+000));
+#1936 = VECTOR('',#1937,1.);
+#1937 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1938 = CYLINDRICAL_SURFACE('',#1939,0.125);
+#1939 = AXIS2_PLACEMENT_3D('',#1940,#1941,#1942);
+#1940 = CARTESIAN_POINT('',(-0.5,2.225,0.E+000));
+#1941 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1942 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#1943 = ADVANCED_FACE('',(#1944),#1963,.T.);
+#1944 = FACE_BOUND('',#1945,.F.);
+#1945 = EDGE_LOOP('',(#1946,#1955,#1961,#1962));
+#1946 = ORIENTED_EDGE('',*,*,#1947,.F.);
+#1947 = EDGE_CURVE('',#1948,#1883,#1950,.T.);
+#1948 = VERTEX_POINT('',#1949);
+#1949 = CARTESIAN_POINT('',(-2.225,0.375,0.E+000));
+#1950 = CIRCLE('',#1951,0.125);
+#1951 = AXIS2_PLACEMENT_3D('',#1952,#1953,#1954);
+#1952 = CARTESIAN_POINT('',(-2.225,0.5,0.E+000));
+#1953 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1954 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1955 = ORIENTED_EDGE('',*,*,#1956,.T.);
+#1956 = EDGE_CURVE('',#1948,#260,#1957,.T.);
+#1957 = LINE('',#1958,#1959);
+#1958 = CARTESIAN_POINT('',(-2.225,0.375,0.E+000));
+#1959 = VECTOR('',#1960,1.);
+#1960 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1961 = ORIENTED_EDGE('',*,*,#259,.F.);
+#1962 = ORIENTED_EDGE('',*,*,#1892,.F.);
+#1963 = CYLINDRICAL_SURFACE('',#1964,0.125);
+#1964 = AXIS2_PLACEMENT_3D('',#1965,#1966,#1967);
+#1965 = CARTESIAN_POINT('',(-2.225,0.5,0.E+000));
+#1966 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#1967 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#1968 = ADVANCED_FACE('',(#1969),#1996,.F.);
+#1969 = FACE_BOUND('',#1970,.F.);
+#1970 = EDGE_LOOP('',(#1971,#1979,#1980,#1981,#1982,#1990));
+#1971 = ORIENTED_EDGE('',*,*,#1972,.F.);
+#1972 = EDGE_CURVE('',#1923,#1973,#1975,.T.);
+#1973 = VERTEX_POINT('',#1974);
+#1974 = CARTESIAN_POINT('',(-0.375,2.5,0.E+000));
+#1975 = LINE('',#1976,#1977);
+#1976 = CARTESIAN_POINT('',(-0.375,2.225,0.E+000));
+#1977 = VECTOR('',#1978,1.);
+#1978 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1979 = ORIENTED_EDGE('',*,*,#1933,.T.);
+#1980 = ORIENTED_EDGE('',*,*,#1034,.F.);
+#1981 = ORIENTED_EDGE('',*,*,#1435,.F.);
+#1982 = ORIENTED_EDGE('',*,*,#1983,.T.);
+#1983 = EDGE_CURVE('',#1428,#1984,#1986,.T.);
+#1984 = VERTEX_POINT('',#1985);
+#1985 = CARTESIAN_POINT('',(-0.375,2.5,0.2));
+#1986 = LINE('',#1987,#1988);
+#1987 = CARTESIAN_POINT('',(-0.375,2.225,0.2));
+#1988 = VECTOR('',#1989,1.);
+#1989 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#1990 = ORIENTED_EDGE('',*,*,#1991,.F.);
+#1991 = EDGE_CURVE('',#1973,#1984,#1992,.T.);
+#1992 = LINE('',#1993,#1994);
+#1993 = CARTESIAN_POINT('',(-0.375,2.5,0.E+000));
+#1994 = VECTOR('',#1995,1.);
+#1995 = DIRECTION('',(0.E+000,0.E+000,1.));
+#1996 = PLANE('',#1997);
+#1997 = AXIS2_PLACEMENT_3D('',#1998,#1999,#2000);
+#1998 = CARTESIAN_POINT('',(-0.375,2.225,0.E+000));
+#1999 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2000 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2001 = ADVANCED_FACE('',(#2002),#2029,.F.);
+#2002 = FACE_BOUND('',#2003,.F.);
+#2003 = EDGE_LOOP('',(#2004,#2012,#2020,#2026,#2027,#2028));
+#2004 = ORIENTED_EDGE('',*,*,#2005,.F.);
+#2005 = EDGE_CURVE('',#2006,#1948,#2008,.T.);
+#2006 = VERTEX_POINT('',#2007);
+#2007 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000));
+#2008 = LINE('',#2009,#2010);
+#2009 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000));
+#2010 = VECTOR('',#2011,1.);
+#2011 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2012 = ORIENTED_EDGE('',*,*,#2013,.T.);
+#2013 = EDGE_CURVE('',#2006,#2014,#2016,.T.);
+#2014 = VERTEX_POINT('',#2015);
+#2015 = CARTESIAN_POINT('',(-2.5,0.375,0.2));
+#2016 = LINE('',#2017,#2018);
+#2017 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000));
+#2018 = VECTOR('',#2019,1.);
+#2019 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2020 = ORIENTED_EDGE('',*,*,#2021,.T.);
+#2021 = EDGE_CURVE('',#2014,#1290,#2022,.T.);
+#2022 = LINE('',#2023,#2024);
+#2023 = CARTESIAN_POINT('',(-2.5,0.375,0.2));
+#2024 = VECTOR('',#2025,1.);
+#2025 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2026 = ORIENTED_EDGE('',*,*,#1289,.F.);
+#2027 = ORIENTED_EDGE('',*,*,#268,.F.);
+#2028 = ORIENTED_EDGE('',*,*,#1956,.F.);
+#2029 = PLANE('',#2030);
+#2030 = AXIS2_PLACEMENT_3D('',#2031,#2032,#2033);
+#2031 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000));
+#2032 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#2033 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2034 = ADVANCED_FACE('',(#2035),#2069,.F.);
+#2035 = FACE_BOUND('',#2036,.F.);
+#2036 = EDGE_LOOP('',(#2037,#2047,#2055,#2061,#2062,#2063));
+#2037 = ORIENTED_EDGE('',*,*,#2038,.F.);
+#2038 = EDGE_CURVE('',#2039,#2041,#2043,.T.);
+#2039 = VERTEX_POINT('',#2040);
+#2040 = CARTESIAN_POINT('',(-0.125,2.5,0.E+000));
+#2041 = VERTEX_POINT('',#2042);
+#2042 = CARTESIAN_POINT('',(-0.125,2.225,0.E+000));
+#2043 = LINE('',#2044,#2045);
+#2044 = CARTESIAN_POINT('',(-0.125,2.5,0.E+000));
+#2045 = VECTOR('',#2046,1.);
+#2046 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2047 = ORIENTED_EDGE('',*,*,#2048,.T.);
+#2048 = EDGE_CURVE('',#2039,#2049,#2051,.T.);
+#2049 = VERTEX_POINT('',#2050);
+#2050 = CARTESIAN_POINT('',(-0.125,2.5,0.2));
+#2051 = LINE('',#2052,#2053);
+#2052 = CARTESIAN_POINT('',(-0.125,2.5,0.E+000));
+#2053 = VECTOR('',#2054,1.);
+#2054 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2055 = ORIENTED_EDGE('',*,*,#2056,.T.);
+#2056 = EDGE_CURVE('',#2049,#1443,#2057,.T.);
+#2057 = LINE('',#2058,#2059);
+#2058 = CARTESIAN_POINT('',(-0.125,2.5,0.2));
+#2059 = VECTOR('',#2060,1.);
+#2060 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2061 = ORIENTED_EDGE('',*,*,#1442,.F.);
+#2062 = ORIENTED_EDGE('',*,*,#1018,.F.);
+#2063 = ORIENTED_EDGE('',*,*,#2064,.F.);
+#2064 = EDGE_CURVE('',#2041,#1010,#2065,.T.);
+#2065 = LINE('',#2066,#2067);
+#2066 = CARTESIAN_POINT('',(-0.125,2.225,0.E+000));
+#2067 = VECTOR('',#2068,1.);
+#2068 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2069 = PLANE('',#2070);
+#2070 = AXIS2_PLACEMENT_3D('',#2071,#2072,#2073);
+#2071 = CARTESIAN_POINT('',(-0.125,2.5,0.E+000));
+#2072 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#2073 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2074 = ADVANCED_FACE('',(#2075),#2109,.F.);
+#2075 = FACE_BOUND('',#2076,.F.);
+#2076 = EDGE_LOOP('',(#2077,#2087,#2093,#2094,#2095,#2103));
+#2077 = ORIENTED_EDGE('',*,*,#2078,.F.);
+#2078 = EDGE_CURVE('',#2079,#2081,#2083,.T.);
+#2079 = VERTEX_POINT('',#2080);
+#2080 = CARTESIAN_POINT('',(-2.225,0.125,0.E+000));
+#2081 = VERTEX_POINT('',#2082);
+#2082 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000));
+#2083 = LINE('',#2084,#2085);
+#2084 = CARTESIAN_POINT('',(-2.225,0.125,0.E+000));
+#2085 = VECTOR('',#2086,1.);
+#2086 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2087 = ORIENTED_EDGE('',*,*,#2088,.T.);
+#2088 = EDGE_CURVE('',#2079,#285,#2089,.T.);
+#2089 = LINE('',#2090,#2091);
+#2090 = CARTESIAN_POINT('',(-2.225,0.125,0.E+000));
+#2091 = VECTOR('',#2092,1.);
+#2092 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2093 = ORIENTED_EDGE('',*,*,#284,.F.);
+#2094 = ORIENTED_EDGE('',*,*,#1282,.F.);
+#2095 = ORIENTED_EDGE('',*,*,#2096,.T.);
+#2096 = EDGE_CURVE('',#1275,#2097,#2099,.T.);
+#2097 = VERTEX_POINT('',#2098);
+#2098 = CARTESIAN_POINT('',(-2.5,0.125,0.2));
+#2099 = LINE('',#2100,#2101);
+#2100 = CARTESIAN_POINT('',(-2.225,0.125,0.2));
+#2101 = VECTOR('',#2102,1.);
+#2102 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2103 = ORIENTED_EDGE('',*,*,#2104,.F.);
+#2104 = EDGE_CURVE('',#2081,#2097,#2105,.T.);
+#2105 = LINE('',#2106,#2107);
+#2106 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000));
+#2107 = VECTOR('',#2108,1.);
+#2108 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2109 = PLANE('',#2110);
+#2110 = AXIS2_PLACEMENT_3D('',#2111,#2112,#2113);
+#2111 = CARTESIAN_POINT('',(-2.225,0.125,0.E+000));
+#2112 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2113 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2114 = ADVANCED_FACE('',(#2115),#2134,.T.);
+#2115 = FACE_BOUND('',#2116,.F.);
+#2116 = EDGE_LOOP('',(#2117,#2126,#2127,#2128));
+#2117 = ORIENTED_EDGE('',*,*,#2118,.F.);
+#2118 = EDGE_CURVE('',#2041,#2119,#2121,.T.);
+#2119 = VERTEX_POINT('',#2120);
+#2120 = CARTESIAN_POINT('',(0.125,2.225,0.E+000));
+#2121 = CIRCLE('',#2122,0.125);
+#2122 = AXIS2_PLACEMENT_3D('',#2123,#2124,#2125);
+#2123 = CARTESIAN_POINT('',(7.216449660064E-016,2.225,0.E+000));
+#2124 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2125 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2126 = ORIENTED_EDGE('',*,*,#2064,.T.);
+#2127 = ORIENTED_EDGE('',*,*,#1009,.F.);
+#2128 = ORIENTED_EDGE('',*,*,#2129,.F.);
+#2129 = EDGE_CURVE('',#2119,#1002,#2130,.T.);
+#2130 = LINE('',#2131,#2132);
+#2131 = CARTESIAN_POINT('',(0.125,2.225,0.E+000));
+#2132 = VECTOR('',#2133,1.);
+#2133 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2134 = CYLINDRICAL_SURFACE('',#2135,0.125);
+#2135 = AXIS2_PLACEMENT_3D('',#2136,#2137,#2138);
+#2136 = CARTESIAN_POINT('',(7.216449660064E-016,2.225,0.E+000));
+#2137 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2138 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2139 = ADVANCED_FACE('',(#2140),#2159,.T.);
+#2140 = FACE_BOUND('',#2141,.F.);
+#2141 = EDGE_LOOP('',(#2142,#2151,#2157,#2158));
+#2142 = ORIENTED_EDGE('',*,*,#2143,.F.);
+#2143 = EDGE_CURVE('',#2144,#2079,#2146,.T.);
+#2144 = VERTEX_POINT('',#2145);
+#2145 = CARTESIAN_POINT('',(-2.225,-0.125,0.E+000));
+#2146 = CIRCLE('',#2147,0.125);
+#2147 = AXIS2_PLACEMENT_3D('',#2148,#2149,#2150);
+#2148 = CARTESIAN_POINT('',(-2.225,7.49400541622E-016,0.E+000));
+#2149 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2150 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2151 = ORIENTED_EDGE('',*,*,#2152,.T.);
+#2152 = EDGE_CURVE('',#2144,#293,#2153,.T.);
+#2153 = LINE('',#2154,#2155);
+#2154 = CARTESIAN_POINT('',(-2.225,-0.125,0.E+000));
+#2155 = VECTOR('',#2156,1.);
+#2156 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2157 = ORIENTED_EDGE('',*,*,#292,.F.);
+#2158 = ORIENTED_EDGE('',*,*,#2088,.F.);
+#2159 = CYLINDRICAL_SURFACE('',#2160,0.125);
+#2160 = AXIS2_PLACEMENT_3D('',#2161,#2162,#2163);
+#2161 = CARTESIAN_POINT('',(-2.225,7.49400541622E-016,0.E+000));
+#2162 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2163 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2164 = ADVANCED_FACE('',(#2165),#2192,.F.);
+#2165 = FACE_BOUND('',#2166,.F.);
+#2166 = EDGE_LOOP('',(#2167,#2175,#2176,#2177,#2178,#2186));
+#2167 = ORIENTED_EDGE('',*,*,#2168,.F.);
+#2168 = EDGE_CURVE('',#2119,#2169,#2171,.T.);
+#2169 = VERTEX_POINT('',#2170);
+#2170 = CARTESIAN_POINT('',(0.125,2.5,0.E+000));
+#2171 = LINE('',#2172,#2173);
+#2172 = CARTESIAN_POINT('',(0.125,2.225,0.E+000));
+#2173 = VECTOR('',#2174,1.);
+#2174 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2175 = ORIENTED_EDGE('',*,*,#2129,.T.);
+#2176 = ORIENTED_EDGE('',*,*,#1001,.F.);
+#2177 = ORIENTED_EDGE('',*,*,#1458,.F.);
+#2178 = ORIENTED_EDGE('',*,*,#2179,.T.);
+#2179 = EDGE_CURVE('',#1451,#2180,#2182,.T.);
+#2180 = VERTEX_POINT('',#2181);
+#2181 = CARTESIAN_POINT('',(0.125,2.5,0.2));
+#2182 = LINE('',#2183,#2184);
+#2183 = CARTESIAN_POINT('',(0.125,2.225,0.2));
+#2184 = VECTOR('',#2185,1.);
+#2185 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2186 = ORIENTED_EDGE('',*,*,#2187,.F.);
+#2187 = EDGE_CURVE('',#2169,#2180,#2188,.T.);
+#2188 = LINE('',#2189,#2190);
+#2189 = CARTESIAN_POINT('',(0.125,2.5,0.E+000));
+#2190 = VECTOR('',#2191,1.);
+#2191 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2192 = PLANE('',#2193);
+#2193 = AXIS2_PLACEMENT_3D('',#2194,#2195,#2196);
+#2194 = CARTESIAN_POINT('',(0.125,2.225,0.E+000));
+#2195 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2196 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2197 = ADVANCED_FACE('',(#2198),#2225,.F.);
+#2198 = FACE_BOUND('',#2199,.F.);
+#2199 = EDGE_LOOP('',(#2200,#2208,#2216,#2222,#2223,#2224));
+#2200 = ORIENTED_EDGE('',*,*,#2201,.F.);
+#2201 = EDGE_CURVE('',#2202,#2144,#2204,.T.);
+#2202 = VERTEX_POINT('',#2203);
+#2203 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000));
+#2204 = LINE('',#2205,#2206);
+#2205 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000));
+#2206 = VECTOR('',#2207,1.);
+#2207 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2208 = ORIENTED_EDGE('',*,*,#2209,.T.);
+#2209 = EDGE_CURVE('',#2202,#2210,#2212,.T.);
+#2210 = VERTEX_POINT('',#2211);
+#2211 = CARTESIAN_POINT('',(-2.5,-0.125,0.2));
+#2212 = LINE('',#2213,#2214);
+#2213 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000));
+#2214 = VECTOR('',#2215,1.);
+#2215 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2216 = ORIENTED_EDGE('',*,*,#2217,.T.);
+#2217 = EDGE_CURVE('',#2210,#1267,#2218,.T.);
+#2218 = LINE('',#2219,#2220);
+#2219 = CARTESIAN_POINT('',(-2.5,-0.125,0.2));
+#2220 = VECTOR('',#2221,1.);
+#2221 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2222 = ORIENTED_EDGE('',*,*,#1266,.F.);
+#2223 = ORIENTED_EDGE('',*,*,#301,.F.);
+#2224 = ORIENTED_EDGE('',*,*,#2152,.F.);
+#2225 = PLANE('',#2226);
+#2226 = AXIS2_PLACEMENT_3D('',#2227,#2228,#2229);
+#2227 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000));
+#2228 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#2229 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2230 = ADVANCED_FACE('',(#2231),#2265,.F.);
+#2231 = FACE_BOUND('',#2232,.F.);
+#2232 = EDGE_LOOP('',(#2233,#2243,#2251,#2257,#2258,#2259));
+#2233 = ORIENTED_EDGE('',*,*,#2234,.F.);
+#2234 = EDGE_CURVE('',#2235,#2237,#2239,.T.);
+#2235 = VERTEX_POINT('',#2236);
+#2236 = CARTESIAN_POINT('',(0.375,2.5,0.E+000));
+#2237 = VERTEX_POINT('',#2238);
+#2238 = CARTESIAN_POINT('',(0.375,2.225,0.E+000));
+#2239 = LINE('',#2240,#2241);
+#2240 = CARTESIAN_POINT('',(0.375,2.5,0.E+000));
+#2241 = VECTOR('',#2242,1.);
+#2242 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2243 = ORIENTED_EDGE('',*,*,#2244,.T.);
+#2244 = EDGE_CURVE('',#2235,#2245,#2247,.T.);
+#2245 = VERTEX_POINT('',#2246);
+#2246 = CARTESIAN_POINT('',(0.375,2.5,0.2));
+#2247 = LINE('',#2248,#2249);
+#2248 = CARTESIAN_POINT('',(0.375,2.5,0.E+000));
+#2249 = VECTOR('',#2250,1.);
+#2250 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2251 = ORIENTED_EDGE('',*,*,#2252,.T.);
+#2252 = EDGE_CURVE('',#2245,#1466,#2253,.T.);
+#2253 = LINE('',#2254,#2255);
+#2254 = CARTESIAN_POINT('',(0.375,2.5,0.2));
+#2255 = VECTOR('',#2256,1.);
+#2256 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2257 = ORIENTED_EDGE('',*,*,#1465,.F.);
+#2258 = ORIENTED_EDGE('',*,*,#985,.F.);
+#2259 = ORIENTED_EDGE('',*,*,#2260,.F.);
+#2260 = EDGE_CURVE('',#2237,#977,#2261,.T.);
+#2261 = LINE('',#2262,#2263);
+#2262 = CARTESIAN_POINT('',(0.375,2.225,0.E+000));
+#2263 = VECTOR('',#2264,1.);
+#2264 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2265 = PLANE('',#2266);
+#2266 = AXIS2_PLACEMENT_3D('',#2267,#2268,#2269);
+#2267 = CARTESIAN_POINT('',(0.375,2.5,0.E+000));
+#2268 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#2269 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2270 = ADVANCED_FACE('',(#2271),#2305,.F.);
+#2271 = FACE_BOUND('',#2272,.F.);
+#2272 = EDGE_LOOP('',(#2273,#2283,#2289,#2290,#2291,#2299));
+#2273 = ORIENTED_EDGE('',*,*,#2274,.F.);
+#2274 = EDGE_CURVE('',#2275,#2277,#2279,.T.);
+#2275 = VERTEX_POINT('',#2276);
+#2276 = CARTESIAN_POINT('',(-2.225,-0.375,0.E+000));
+#2277 = VERTEX_POINT('',#2278);
+#2278 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000));
+#2279 = LINE('',#2280,#2281);
+#2280 = CARTESIAN_POINT('',(-2.225,-0.375,0.E+000));
+#2281 = VECTOR('',#2282,1.);
+#2282 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2283 = ORIENTED_EDGE('',*,*,#2284,.T.);
+#2284 = EDGE_CURVE('',#2275,#318,#2285,.T.);
+#2285 = LINE('',#2286,#2287);
+#2286 = CARTESIAN_POINT('',(-2.225,-0.375,0.E+000));
+#2287 = VECTOR('',#2288,1.);
+#2288 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2289 = ORIENTED_EDGE('',*,*,#317,.F.);
+#2290 = ORIENTED_EDGE('',*,*,#1259,.F.);
+#2291 = ORIENTED_EDGE('',*,*,#2292,.T.);
+#2292 = EDGE_CURVE('',#1252,#2293,#2295,.T.);
+#2293 = VERTEX_POINT('',#2294);
+#2294 = CARTESIAN_POINT('',(-2.5,-0.375,0.2));
+#2295 = LINE('',#2296,#2297);
+#2296 = CARTESIAN_POINT('',(-2.225,-0.375,0.2));
+#2297 = VECTOR('',#2298,1.);
+#2298 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2299 = ORIENTED_EDGE('',*,*,#2300,.F.);
+#2300 = EDGE_CURVE('',#2277,#2293,#2301,.T.);
+#2301 = LINE('',#2302,#2303);
+#2302 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000));
+#2303 = VECTOR('',#2304,1.);
+#2304 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2305 = PLANE('',#2306);
+#2306 = AXIS2_PLACEMENT_3D('',#2307,#2308,#2309);
+#2307 = CARTESIAN_POINT('',(-2.225,-0.375,0.E+000));
+#2308 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2309 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2310 = ADVANCED_FACE('',(#2311),#2330,.T.);
+#2311 = FACE_BOUND('',#2312,.F.);
+#2312 = EDGE_LOOP('',(#2313,#2322,#2323,#2324));
+#2313 = ORIENTED_EDGE('',*,*,#2314,.F.);
+#2314 = EDGE_CURVE('',#2237,#2315,#2317,.T.);
+#2315 = VERTEX_POINT('',#2316);
+#2316 = CARTESIAN_POINT('',(0.625,2.225,0.E+000));
+#2317 = CIRCLE('',#2318,0.125);
+#2318 = AXIS2_PLACEMENT_3D('',#2319,#2320,#2321);
+#2319 = CARTESIAN_POINT('',(0.5,2.225,0.E+000));
+#2320 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2321 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2322 = ORIENTED_EDGE('',*,*,#2260,.T.);
+#2323 = ORIENTED_EDGE('',*,*,#976,.F.);
+#2324 = ORIENTED_EDGE('',*,*,#2325,.F.);
+#2325 = EDGE_CURVE('',#2315,#969,#2326,.T.);
+#2326 = LINE('',#2327,#2328);
+#2327 = CARTESIAN_POINT('',(0.625,2.225,0.E+000));
+#2328 = VECTOR('',#2329,1.);
+#2329 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2330 = CYLINDRICAL_SURFACE('',#2331,0.125);
+#2331 = AXIS2_PLACEMENT_3D('',#2332,#2333,#2334);
+#2332 = CARTESIAN_POINT('',(0.5,2.225,0.E+000));
+#2333 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2334 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2335 = ADVANCED_FACE('',(#2336),#2355,.T.);
+#2336 = FACE_BOUND('',#2337,.F.);
+#2337 = EDGE_LOOP('',(#2338,#2347,#2353,#2354));
+#2338 = ORIENTED_EDGE('',*,*,#2339,.F.);
+#2339 = EDGE_CURVE('',#2340,#2275,#2342,.T.);
+#2340 = VERTEX_POINT('',#2341);
+#2341 = CARTESIAN_POINT('',(-2.225,-0.625,0.E+000));
+#2342 = CIRCLE('',#2343,0.125);
+#2343 = AXIS2_PLACEMENT_3D('',#2344,#2345,#2346);
+#2344 = CARTESIAN_POINT('',(-2.225,-0.5,0.E+000));
+#2345 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2346 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2347 = ORIENTED_EDGE('',*,*,#2348,.T.);
+#2348 = EDGE_CURVE('',#2340,#326,#2349,.T.);
+#2349 = LINE('',#2350,#2351);
+#2350 = CARTESIAN_POINT('',(-2.225,-0.625,0.E+000));
+#2351 = VECTOR('',#2352,1.);
+#2352 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2353 = ORIENTED_EDGE('',*,*,#325,.F.);
+#2354 = ORIENTED_EDGE('',*,*,#2284,.F.);
+#2355 = CYLINDRICAL_SURFACE('',#2356,0.125);
+#2356 = AXIS2_PLACEMENT_3D('',#2357,#2358,#2359);
+#2357 = CARTESIAN_POINT('',(-2.225,-0.5,0.E+000));
+#2358 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2359 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2360 = ADVANCED_FACE('',(#2361),#2388,.F.);
+#2361 = FACE_BOUND('',#2362,.F.);
+#2362 = EDGE_LOOP('',(#2363,#2371,#2372,#2373,#2374,#2382));
+#2363 = ORIENTED_EDGE('',*,*,#2364,.F.);
+#2364 = EDGE_CURVE('',#2315,#2365,#2367,.T.);
+#2365 = VERTEX_POINT('',#2366);
+#2366 = CARTESIAN_POINT('',(0.625,2.5,0.E+000));
+#2367 = LINE('',#2368,#2369);
+#2368 = CARTESIAN_POINT('',(0.625,2.225,0.E+000));
+#2369 = VECTOR('',#2370,1.);
+#2370 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2371 = ORIENTED_EDGE('',*,*,#2325,.T.);
+#2372 = ORIENTED_EDGE('',*,*,#968,.F.);
+#2373 = ORIENTED_EDGE('',*,*,#1481,.F.);
+#2374 = ORIENTED_EDGE('',*,*,#2375,.T.);
+#2375 = EDGE_CURVE('',#1474,#2376,#2378,.T.);
+#2376 = VERTEX_POINT('',#2377);
+#2377 = CARTESIAN_POINT('',(0.625,2.5,0.2));
+#2378 = LINE('',#2379,#2380);
+#2379 = CARTESIAN_POINT('',(0.625,2.225,0.2));
+#2380 = VECTOR('',#2381,1.);
+#2381 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2382 = ORIENTED_EDGE('',*,*,#2383,.F.);
+#2383 = EDGE_CURVE('',#2365,#2376,#2384,.T.);
+#2384 = LINE('',#2385,#2386);
+#2385 = CARTESIAN_POINT('',(0.625,2.5,0.E+000));
+#2386 = VECTOR('',#2387,1.);
+#2387 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2388 = PLANE('',#2389);
+#2389 = AXIS2_PLACEMENT_3D('',#2390,#2391,#2392);
+#2390 = CARTESIAN_POINT('',(0.625,2.225,0.E+000));
+#2391 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2392 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2393 = ADVANCED_FACE('',(#2394),#2421,.F.);
+#2394 = FACE_BOUND('',#2395,.F.);
+#2395 = EDGE_LOOP('',(#2396,#2404,#2412,#2418,#2419,#2420));
+#2396 = ORIENTED_EDGE('',*,*,#2397,.F.);
+#2397 = EDGE_CURVE('',#2398,#2340,#2400,.T.);
+#2398 = VERTEX_POINT('',#2399);
+#2399 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000));
+#2400 = LINE('',#2401,#2402);
+#2401 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000));
+#2402 = VECTOR('',#2403,1.);
+#2403 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2404 = ORIENTED_EDGE('',*,*,#2405,.T.);
+#2405 = EDGE_CURVE('',#2398,#2406,#2408,.T.);
+#2406 = VERTEX_POINT('',#2407);
+#2407 = CARTESIAN_POINT('',(-2.5,-0.625,0.2));
+#2408 = LINE('',#2409,#2410);
+#2409 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000));
+#2410 = VECTOR('',#2411,1.);
+#2411 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2412 = ORIENTED_EDGE('',*,*,#2413,.T.);
+#2413 = EDGE_CURVE('',#2406,#1244,#2414,.T.);
+#2414 = LINE('',#2415,#2416);
+#2415 = CARTESIAN_POINT('',(-2.5,-0.625,0.2));
+#2416 = VECTOR('',#2417,1.);
+#2417 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2418 = ORIENTED_EDGE('',*,*,#1243,.F.);
+#2419 = ORIENTED_EDGE('',*,*,#334,.F.);
+#2420 = ORIENTED_EDGE('',*,*,#2348,.F.);
+#2421 = PLANE('',#2422);
+#2422 = AXIS2_PLACEMENT_3D('',#2423,#2424,#2425);
+#2423 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000));
+#2424 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#2425 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2426 = ADVANCED_FACE('',(#2427),#2461,.F.);
+#2427 = FACE_BOUND('',#2428,.F.);
+#2428 = EDGE_LOOP('',(#2429,#2439,#2447,#2453,#2454,#2455));
+#2429 = ORIENTED_EDGE('',*,*,#2430,.F.);
+#2430 = EDGE_CURVE('',#2431,#2433,#2435,.T.);
+#2431 = VERTEX_POINT('',#2432);
+#2432 = CARTESIAN_POINT('',(0.875,2.5,0.E+000));
+#2433 = VERTEX_POINT('',#2434);
+#2434 = CARTESIAN_POINT('',(0.875,2.225,0.E+000));
+#2435 = LINE('',#2436,#2437);
+#2436 = CARTESIAN_POINT('',(0.875,2.5,0.E+000));
+#2437 = VECTOR('',#2438,1.);
+#2438 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2439 = ORIENTED_EDGE('',*,*,#2440,.T.);
+#2440 = EDGE_CURVE('',#2431,#2441,#2443,.T.);
+#2441 = VERTEX_POINT('',#2442);
+#2442 = CARTESIAN_POINT('',(0.875,2.5,0.2));
+#2443 = LINE('',#2444,#2445);
+#2444 = CARTESIAN_POINT('',(0.875,2.5,0.E+000));
+#2445 = VECTOR('',#2446,1.);
+#2446 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2447 = ORIENTED_EDGE('',*,*,#2448,.T.);
+#2448 = EDGE_CURVE('',#2441,#1489,#2449,.T.);
+#2449 = LINE('',#2450,#2451);
+#2450 = CARTESIAN_POINT('',(0.875,2.5,0.2));
+#2451 = VECTOR('',#2452,1.);
+#2452 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2453 = ORIENTED_EDGE('',*,*,#1488,.F.);
+#2454 = ORIENTED_EDGE('',*,*,#952,.F.);
+#2455 = ORIENTED_EDGE('',*,*,#2456,.F.);
+#2456 = EDGE_CURVE('',#2433,#944,#2457,.T.);
+#2457 = LINE('',#2458,#2459);
+#2458 = CARTESIAN_POINT('',(0.875,2.225,0.E+000));
+#2459 = VECTOR('',#2460,1.);
+#2460 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2461 = PLANE('',#2462);
+#2462 = AXIS2_PLACEMENT_3D('',#2463,#2464,#2465);
+#2463 = CARTESIAN_POINT('',(0.875,2.5,0.E+000));
+#2464 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#2465 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2466 = ADVANCED_FACE('',(#2467),#2501,.F.);
+#2467 = FACE_BOUND('',#2468,.F.);
+#2468 = EDGE_LOOP('',(#2469,#2479,#2485,#2486,#2487,#2495));
+#2469 = ORIENTED_EDGE('',*,*,#2470,.F.);
+#2470 = EDGE_CURVE('',#2471,#2473,#2475,.T.);
+#2471 = VERTEX_POINT('',#2472);
+#2472 = CARTESIAN_POINT('',(-2.225,-0.875,0.E+000));
+#2473 = VERTEX_POINT('',#2474);
+#2474 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000));
+#2475 = LINE('',#2476,#2477);
+#2476 = CARTESIAN_POINT('',(-2.225,-0.875,0.E+000));
+#2477 = VECTOR('',#2478,1.);
+#2478 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2479 = ORIENTED_EDGE('',*,*,#2480,.T.);
+#2480 = EDGE_CURVE('',#2471,#351,#2481,.T.);
+#2481 = LINE('',#2482,#2483);
+#2482 = CARTESIAN_POINT('',(-2.225,-0.875,0.E+000));
+#2483 = VECTOR('',#2484,1.);
+#2484 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2485 = ORIENTED_EDGE('',*,*,#350,.F.);
+#2486 = ORIENTED_EDGE('',*,*,#1236,.F.);
+#2487 = ORIENTED_EDGE('',*,*,#2488,.T.);
+#2488 = EDGE_CURVE('',#1229,#2489,#2491,.T.);
+#2489 = VERTEX_POINT('',#2490);
+#2490 = CARTESIAN_POINT('',(-2.5,-0.875,0.2));
+#2491 = LINE('',#2492,#2493);
+#2492 = CARTESIAN_POINT('',(-2.225,-0.875,0.2));
+#2493 = VECTOR('',#2494,1.);
+#2494 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2495 = ORIENTED_EDGE('',*,*,#2496,.F.);
+#2496 = EDGE_CURVE('',#2473,#2489,#2497,.T.);
+#2497 = LINE('',#2498,#2499);
+#2498 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000));
+#2499 = VECTOR('',#2500,1.);
+#2500 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2501 = PLANE('',#2502);
+#2502 = AXIS2_PLACEMENT_3D('',#2503,#2504,#2505);
+#2503 = CARTESIAN_POINT('',(-2.225,-0.875,0.E+000));
+#2504 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2505 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2506 = ADVANCED_FACE('',(#2507),#2526,.T.);
+#2507 = FACE_BOUND('',#2508,.F.);
+#2508 = EDGE_LOOP('',(#2509,#2518,#2519,#2520));
+#2509 = ORIENTED_EDGE('',*,*,#2510,.F.);
+#2510 = EDGE_CURVE('',#2433,#2511,#2513,.T.);
+#2511 = VERTEX_POINT('',#2512);
+#2512 = CARTESIAN_POINT('',(1.125,2.225,0.E+000));
+#2513 = CIRCLE('',#2514,0.125);
+#2514 = AXIS2_PLACEMENT_3D('',#2515,#2516,#2517);
+#2515 = CARTESIAN_POINT('',(1.,2.225,0.E+000));
+#2516 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2517 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2518 = ORIENTED_EDGE('',*,*,#2456,.T.);
+#2519 = ORIENTED_EDGE('',*,*,#943,.F.);
+#2520 = ORIENTED_EDGE('',*,*,#2521,.F.);
+#2521 = EDGE_CURVE('',#2511,#936,#2522,.T.);
+#2522 = LINE('',#2523,#2524);
+#2523 = CARTESIAN_POINT('',(1.125,2.225,0.E+000));
+#2524 = VECTOR('',#2525,1.);
+#2525 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2526 = CYLINDRICAL_SURFACE('',#2527,0.125);
+#2527 = AXIS2_PLACEMENT_3D('',#2528,#2529,#2530);
+#2528 = CARTESIAN_POINT('',(1.,2.225,0.E+000));
+#2529 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2530 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2531 = ADVANCED_FACE('',(#2532),#2551,.T.);
+#2532 = FACE_BOUND('',#2533,.F.);
+#2533 = EDGE_LOOP('',(#2534,#2543,#2549,#2550));
+#2534 = ORIENTED_EDGE('',*,*,#2535,.F.);
+#2535 = EDGE_CURVE('',#2536,#2471,#2538,.T.);
+#2536 = VERTEX_POINT('',#2537);
+#2537 = CARTESIAN_POINT('',(-2.225,-1.125,0.E+000));
+#2538 = CIRCLE('',#2539,0.125);
+#2539 = AXIS2_PLACEMENT_3D('',#2540,#2541,#2542);
+#2540 = CARTESIAN_POINT('',(-2.225,-1.,0.E+000));
+#2541 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2542 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2543 = ORIENTED_EDGE('',*,*,#2544,.T.);
+#2544 = EDGE_CURVE('',#2536,#359,#2545,.T.);
+#2545 = LINE('',#2546,#2547);
+#2546 = CARTESIAN_POINT('',(-2.225,-1.125,0.E+000));
+#2547 = VECTOR('',#2548,1.);
+#2548 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2549 = ORIENTED_EDGE('',*,*,#358,.F.);
+#2550 = ORIENTED_EDGE('',*,*,#2480,.F.);
+#2551 = CYLINDRICAL_SURFACE('',#2552,0.125);
+#2552 = AXIS2_PLACEMENT_3D('',#2553,#2554,#2555);
+#2553 = CARTESIAN_POINT('',(-2.225,-1.,0.E+000));
+#2554 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2555 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2556 = ADVANCED_FACE('',(#2557),#2584,.F.);
+#2557 = FACE_BOUND('',#2558,.F.);
+#2558 = EDGE_LOOP('',(#2559,#2567,#2568,#2569,#2570,#2578));
+#2559 = ORIENTED_EDGE('',*,*,#2560,.F.);
+#2560 = EDGE_CURVE('',#2511,#2561,#2563,.T.);
+#2561 = VERTEX_POINT('',#2562);
+#2562 = CARTESIAN_POINT('',(1.125,2.5,0.E+000));
+#2563 = LINE('',#2564,#2565);
+#2564 = CARTESIAN_POINT('',(1.125,2.225,0.E+000));
+#2565 = VECTOR('',#2566,1.);
+#2566 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2567 = ORIENTED_EDGE('',*,*,#2521,.T.);
+#2568 = ORIENTED_EDGE('',*,*,#935,.F.);
+#2569 = ORIENTED_EDGE('',*,*,#1504,.F.);
+#2570 = ORIENTED_EDGE('',*,*,#2571,.T.);
+#2571 = EDGE_CURVE('',#1497,#2572,#2574,.T.);
+#2572 = VERTEX_POINT('',#2573);
+#2573 = CARTESIAN_POINT('',(1.125,2.5,0.2));
+#2574 = LINE('',#2575,#2576);
+#2575 = CARTESIAN_POINT('',(1.125,2.225,0.2));
+#2576 = VECTOR('',#2577,1.);
+#2577 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2578 = ORIENTED_EDGE('',*,*,#2579,.F.);
+#2579 = EDGE_CURVE('',#2561,#2572,#2580,.T.);
+#2580 = LINE('',#2581,#2582);
+#2581 = CARTESIAN_POINT('',(1.125,2.5,0.E+000));
+#2582 = VECTOR('',#2583,1.);
+#2583 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2584 = PLANE('',#2585);
+#2585 = AXIS2_PLACEMENT_3D('',#2586,#2587,#2588);
+#2586 = CARTESIAN_POINT('',(1.125,2.225,0.E+000));
+#2587 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2588 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2589 = ADVANCED_FACE('',(#2590),#2617,.F.);
+#2590 = FACE_BOUND('',#2591,.F.);
+#2591 = EDGE_LOOP('',(#2592,#2600,#2608,#2614,#2615,#2616));
+#2592 = ORIENTED_EDGE('',*,*,#2593,.F.);
+#2593 = EDGE_CURVE('',#2594,#2536,#2596,.T.);
+#2594 = VERTEX_POINT('',#2595);
+#2595 = CARTESIAN_POINT('',(-2.5,-1.125,0.E+000));
+#2596 = LINE('',#2597,#2598);
+#2597 = CARTESIAN_POINT('',(-2.5,-1.125,0.E+000));
+#2598 = VECTOR('',#2599,1.);
+#2599 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2600 = ORIENTED_EDGE('',*,*,#2601,.T.);
+#2601 = EDGE_CURVE('',#2594,#2602,#2604,.T.);
+#2602 = VERTEX_POINT('',#2603);
+#2603 = CARTESIAN_POINT('',(-2.5,-1.125,0.2));
+#2604 = LINE('',#2605,#2606);
+#2605 = CARTESIAN_POINT('',(-2.5,-1.125,0.E+000));
+#2606 = VECTOR('',#2607,1.);
+#2607 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2608 = ORIENTED_EDGE('',*,*,#2609,.T.);
+#2609 = EDGE_CURVE('',#2602,#1221,#2610,.T.);
+#2610 = LINE('',#2611,#2612);
+#2611 = CARTESIAN_POINT('',(-2.5,-1.125,0.2));
+#2612 = VECTOR('',#2613,1.);
+#2613 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2614 = ORIENTED_EDGE('',*,*,#1220,.F.);
+#2615 = ORIENTED_EDGE('',*,*,#367,.F.);
+#2616 = ORIENTED_EDGE('',*,*,#2544,.F.);
+#2617 = PLANE('',#2618);
+#2618 = AXIS2_PLACEMENT_3D('',#2619,#2620,#2621);
+#2619 = CARTESIAN_POINT('',(-2.5,-1.125,0.E+000));
+#2620 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#2621 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2622 = ADVANCED_FACE('',(#2623),#2657,.F.);
+#2623 = FACE_BOUND('',#2624,.F.);
+#2624 = EDGE_LOOP('',(#2625,#2635,#2643,#2649,#2650,#2651));
+#2625 = ORIENTED_EDGE('',*,*,#2626,.F.);
+#2626 = EDGE_CURVE('',#2627,#2629,#2631,.T.);
+#2627 = VERTEX_POINT('',#2628);
+#2628 = CARTESIAN_POINT('',(1.375,2.5,0.E+000));
+#2629 = VERTEX_POINT('',#2630);
+#2630 = CARTESIAN_POINT('',(1.375,2.225,0.E+000));
+#2631 = LINE('',#2632,#2633);
+#2632 = CARTESIAN_POINT('',(1.375,2.5,0.E+000));
+#2633 = VECTOR('',#2634,1.);
+#2634 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2635 = ORIENTED_EDGE('',*,*,#2636,.T.);
+#2636 = EDGE_CURVE('',#2627,#2637,#2639,.T.);
+#2637 = VERTEX_POINT('',#2638);
+#2638 = CARTESIAN_POINT('',(1.375,2.5,0.2));
+#2639 = LINE('',#2640,#2641);
+#2640 = CARTESIAN_POINT('',(1.375,2.5,0.E+000));
+#2641 = VECTOR('',#2642,1.);
+#2642 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2643 = ORIENTED_EDGE('',*,*,#2644,.T.);
+#2644 = EDGE_CURVE('',#2637,#1512,#2645,.T.);
+#2645 = LINE('',#2646,#2647);
+#2646 = CARTESIAN_POINT('',(1.375,2.5,0.2));
+#2647 = VECTOR('',#2648,1.);
+#2648 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2649 = ORIENTED_EDGE('',*,*,#1511,.F.);
+#2650 = ORIENTED_EDGE('',*,*,#919,.F.);
+#2651 = ORIENTED_EDGE('',*,*,#2652,.F.);
+#2652 = EDGE_CURVE('',#2629,#911,#2653,.T.);
+#2653 = LINE('',#2654,#2655);
+#2654 = CARTESIAN_POINT('',(1.375,2.225,0.E+000));
+#2655 = VECTOR('',#2656,1.);
+#2656 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2657 = PLANE('',#2658);
+#2658 = AXIS2_PLACEMENT_3D('',#2659,#2660,#2661);
+#2659 = CARTESIAN_POINT('',(1.375,2.5,0.E+000));
+#2660 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#2661 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#2662 = ADVANCED_FACE('',(#2663),#2697,.F.);
+#2663 = FACE_BOUND('',#2664,.F.);
+#2664 = EDGE_LOOP('',(#2665,#2675,#2681,#2682,#2683,#2691));
+#2665 = ORIENTED_EDGE('',*,*,#2666,.F.);
+#2666 = EDGE_CURVE('',#2667,#2669,#2671,.T.);
+#2667 = VERTEX_POINT('',#2668);
+#2668 = CARTESIAN_POINT('',(-2.225,-1.375,0.E+000));
+#2669 = VERTEX_POINT('',#2670);
+#2670 = CARTESIAN_POINT('',(-2.5,-1.375,0.E+000));
+#2671 = LINE('',#2672,#2673);
+#2672 = CARTESIAN_POINT('',(-2.225,-1.375,0.E+000));
+#2673 = VECTOR('',#2674,1.);
+#2674 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2675 = ORIENTED_EDGE('',*,*,#2676,.T.);
+#2676 = EDGE_CURVE('',#2667,#384,#2677,.T.);
+#2677 = LINE('',#2678,#2679);
+#2678 = CARTESIAN_POINT('',(-2.225,-1.375,0.E+000));
+#2679 = VECTOR('',#2680,1.);
+#2680 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2681 = ORIENTED_EDGE('',*,*,#383,.F.);
+#2682 = ORIENTED_EDGE('',*,*,#1213,.F.);
+#2683 = ORIENTED_EDGE('',*,*,#2684,.T.);
+#2684 = EDGE_CURVE('',#1206,#2685,#2687,.T.);
+#2685 = VERTEX_POINT('',#2686);
+#2686 = CARTESIAN_POINT('',(-2.5,-1.375,0.2));
+#2687 = LINE('',#2688,#2689);
+#2688 = CARTESIAN_POINT('',(-2.225,-1.375,0.2));
+#2689 = VECTOR('',#2690,1.);
+#2690 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2691 = ORIENTED_EDGE('',*,*,#2692,.F.);
+#2692 = EDGE_CURVE('',#2669,#2685,#2693,.T.);
+#2693 = LINE('',#2694,#2695);
+#2694 = CARTESIAN_POINT('',(-2.5,-1.375,0.E+000));
+#2695 = VECTOR('',#2696,1.);
+#2696 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2697 = PLANE('',#2698);
+#2698 = AXIS2_PLACEMENT_3D('',#2699,#2700,#2701);
+#2699 = CARTESIAN_POINT('',(-2.225,-1.375,0.E+000));
+#2700 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2701 = DIRECTION('',(-1.,4.669739647545E-016,0.E+000));
+#2702 = ADVANCED_FACE('',(#2703),#2722,.T.);
+#2703 = FACE_BOUND('',#2704,.F.);
+#2704 = EDGE_LOOP('',(#2705,#2714,#2715,#2716));
+#2705 = ORIENTED_EDGE('',*,*,#2706,.F.);
+#2706 = EDGE_CURVE('',#2629,#2707,#2709,.T.);
+#2707 = VERTEX_POINT('',#2708);
+#2708 = CARTESIAN_POINT('',(1.625,2.225,0.E+000));
+#2709 = CIRCLE('',#2710,0.125);
+#2710 = AXIS2_PLACEMENT_3D('',#2711,#2712,#2713);
+#2711 = CARTESIAN_POINT('',(1.5,2.225,0.E+000));
+#2712 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2713 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2714 = ORIENTED_EDGE('',*,*,#2652,.T.);
+#2715 = ORIENTED_EDGE('',*,*,#910,.F.);
+#2716 = ORIENTED_EDGE('',*,*,#2717,.F.);
+#2717 = EDGE_CURVE('',#2707,#903,#2718,.T.);
+#2718 = LINE('',#2719,#2720);
+#2719 = CARTESIAN_POINT('',(1.625,2.225,0.E+000));
+#2720 = VECTOR('',#2721,1.);
+#2721 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2722 = CYLINDRICAL_SURFACE('',#2723,0.125);
+#2723 = AXIS2_PLACEMENT_3D('',#2724,#2725,#2726);
+#2724 = CARTESIAN_POINT('',(1.5,2.225,0.E+000));
+#2725 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2726 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2727 = ADVANCED_FACE('',(#2728),#2747,.T.);
+#2728 = FACE_BOUND('',#2729,.F.);
+#2729 = EDGE_LOOP('',(#2730,#2739,#2745,#2746));
+#2730 = ORIENTED_EDGE('',*,*,#2731,.F.);
+#2731 = EDGE_CURVE('',#2732,#2667,#2734,.T.);
+#2732 = VERTEX_POINT('',#2733);
+#2733 = CARTESIAN_POINT('',(-2.225,-1.625,0.E+000));
+#2734 = CIRCLE('',#2735,0.125);
+#2735 = AXIS2_PLACEMENT_3D('',#2736,#2737,#2738);
+#2736 = CARTESIAN_POINT('',(-2.225,-1.5,0.E+000));
+#2737 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2738 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2739 = ORIENTED_EDGE('',*,*,#2740,.T.);
+#2740 = EDGE_CURVE('',#2732,#392,#2741,.T.);
+#2741 = LINE('',#2742,#2743);
+#2742 = CARTESIAN_POINT('',(-2.225,-1.625,0.E+000));
+#2743 = VECTOR('',#2744,1.);
+#2744 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2745 = ORIENTED_EDGE('',*,*,#391,.F.);
+#2746 = ORIENTED_EDGE('',*,*,#2676,.F.);
+#2747 = CYLINDRICAL_SURFACE('',#2748,0.125);
+#2748 = AXIS2_PLACEMENT_3D('',#2749,#2750,#2751);
+#2749 = CARTESIAN_POINT('',(-2.225,-1.5,0.E+000));
+#2750 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#2751 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#2752 = ADVANCED_FACE('',(#2753),#2780,.F.);
+#2753 = FACE_BOUND('',#2754,.F.);
+#2754 = EDGE_LOOP('',(#2755,#2763,#2764,#2765,#2766,#2774));
+#2755 = ORIENTED_EDGE('',*,*,#2756,.F.);
+#2756 = EDGE_CURVE('',#2707,#2757,#2759,.T.);
+#2757 = VERTEX_POINT('',#2758);
+#2758 = CARTESIAN_POINT('',(1.625,2.5,0.E+000));
+#2759 = LINE('',#2760,#2761);
+#2760 = CARTESIAN_POINT('',(1.625,2.225,0.E+000));
+#2761 = VECTOR('',#2762,1.);
+#2762 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2763 = ORIENTED_EDGE('',*,*,#2717,.T.);
+#2764 = ORIENTED_EDGE('',*,*,#902,.F.);
+#2765 = ORIENTED_EDGE('',*,*,#1527,.F.);
+#2766 = ORIENTED_EDGE('',*,*,#2767,.T.);
+#2767 = EDGE_CURVE('',#1520,#2768,#2770,.T.);
+#2768 = VERTEX_POINT('',#2769);
+#2769 = CARTESIAN_POINT('',(1.625,2.5,0.2));
+#2770 = LINE('',#2771,#2772);
+#2771 = CARTESIAN_POINT('',(1.625,2.225,0.2));
+#2772 = VECTOR('',#2773,1.);
+#2773 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2774 = ORIENTED_EDGE('',*,*,#2775,.F.);
+#2775 = EDGE_CURVE('',#2757,#2768,#2776,.T.);
+#2776 = LINE('',#2777,#2778);
+#2777 = CARTESIAN_POINT('',(1.625,2.5,0.E+000));
+#2778 = VECTOR('',#2779,1.);
+#2779 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2780 = PLANE('',#2781);
+#2781 = AXIS2_PLACEMENT_3D('',#2782,#2783,#2784);
+#2782 = CARTESIAN_POINT('',(1.625,2.225,0.E+000));
+#2783 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#2784 = DIRECTION('',(4.555315873023E-016,1.,0.E+000));
+#2785 = ADVANCED_FACE('',(#2786),#2813,.F.);
+#2786 = FACE_BOUND('',#2787,.F.);
+#2787 = EDGE_LOOP('',(#2788,#2796,#2804,#2810,#2811,#2812));
+#2788 = ORIENTED_EDGE('',*,*,#2789,.F.);
+#2789 = EDGE_CURVE('',#2790,#2732,#2792,.T.);
+#2790 = VERTEX_POINT('',#2791);
+#2791 = CARTESIAN_POINT('',(-2.5,-1.625,0.E+000));
+#2792 = LINE('',#2793,#2794);
+#2793 = CARTESIAN_POINT('',(-2.5,-1.625,0.E+000));
+#2794 = VECTOR('',#2795,1.);
+#2795 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2796 = ORIENTED_EDGE('',*,*,#2797,.T.);
+#2797 = EDGE_CURVE('',#2790,#2798,#2800,.T.);
+#2798 = VERTEX_POINT('',#2799);
+#2799 = CARTESIAN_POINT('',(-2.5,-1.625,0.2));
+#2800 = LINE('',#2801,#2802);
+#2801 = CARTESIAN_POINT('',(-2.5,-1.625,0.E+000));
+#2802 = VECTOR('',#2803,1.);
+#2803 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2804 = ORIENTED_EDGE('',*,*,#2805,.T.);
+#2805 = EDGE_CURVE('',#2798,#1198,#2806,.T.);
+#2806 = LINE('',#2807,#2808);
+#2807 = CARTESIAN_POINT('',(-2.5,-1.625,0.2));
+#2808 = VECTOR('',#2809,1.);
+#2809 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2810 = ORIENTED_EDGE('',*,*,#1197,.F.);
+#2811 = ORIENTED_EDGE('',*,*,#400,.F.);
+#2812 = ORIENTED_EDGE('',*,*,#2740,.F.);
+#2813 = PLANE('',#2814);
+#2814 = AXIS2_PLACEMENT_3D('',#2815,#2816,#2817);
+#2815 = CARTESIAN_POINT('',(-2.5,-1.625,0.E+000));
+#2816 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#2817 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#2818 = ADVANCED_FACE('',(#2819),#2998,.T.);
+#2819 = FACE_BOUND('',#2820,.T.);
+#2820 = EDGE_LOOP('',(#2821,#2822,#2823,#2831,#2837,#2838,#2846,#2854,
+#2860,#2861,#2869,#2877,#2883,#2884,#2892,#2900,#2906,#2907,#2915,
+#2923,#2929,#2930,#2938,#2946,#2952,#2953,#2961,#2969,#2975,#2976,
+#2984,#2992));
+#2821 = ORIENTED_EDGE('',*,*,#886,.F.);
+#2822 = ORIENTED_EDGE('',*,*,#1534,.T.);
+#2823 = ORIENTED_EDGE('',*,*,#2824,.T.);
+#2824 = EDGE_CURVE('',#1364,#2825,#2827,.T.);
+#2825 = VERTEX_POINT('',#2826);
+#2826 = CARTESIAN_POINT('',(2.49,-2.49,0.92));
+#2827 = LINE('',#2828,#2829);
+#2828 = CARTESIAN_POINT('',(2.49,2.49,0.92));
+#2829 = VECTOR('',#2830,1.);
+#2830 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#2831 = ORIENTED_EDGE('',*,*,#2832,.F.);
+#2832 = EDGE_CURVE('',#648,#2825,#2833,.T.);
+#2833 = LINE('',#2834,#2835);
+#2834 = CARTESIAN_POINT('',(2.49,-2.49,2.E-002));
+#2835 = VECTOR('',#2836,1.);
+#2836 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2837 = ORIENTED_EDGE('',*,*,#655,.F.);
+#2838 = ORIENTED_EDGE('',*,*,#2839,.T.);
+#2839 = EDGE_CURVE('',#656,#2840,#2842,.T.);
+#2840 = VERTEX_POINT('',#2841);
+#2841 = CARTESIAN_POINT('',(2.49,-1.625,0.2));
+#2842 = LINE('',#2843,#2844);
+#2843 = CARTESIAN_POINT('',(2.49,-1.625,1.E-002));
+#2844 = VECTOR('',#2845,1.);
+#2845 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2846 = ORIENTED_EDGE('',*,*,#2847,.T.);
+#2847 = EDGE_CURVE('',#2840,#2848,#2850,.T.);
+#2848 = VERTEX_POINT('',#2849);
+#2849 = CARTESIAN_POINT('',(2.49,-1.375,0.2));
+#2850 = LINE('',#2851,#2852);
+#2851 = CARTESIAN_POINT('',(2.49,0.5575,0.2));
+#2852 = VECTOR('',#2853,1.);
+#2853 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2854 = ORIENTED_EDGE('',*,*,#2855,.T.);
+#2855 = EDGE_CURVE('',#2848,#681,#2856,.T.);
+#2856 = LINE('',#2857,#2858);
+#2857 = CARTESIAN_POINT('',(2.49,-1.375,1.E-002));
+#2858 = VECTOR('',#2859,1.);
+#2859 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2860 = ORIENTED_EDGE('',*,*,#688,.F.);
+#2861 = ORIENTED_EDGE('',*,*,#2862,.T.);
+#2862 = EDGE_CURVE('',#689,#2863,#2865,.T.);
+#2863 = VERTEX_POINT('',#2864);
+#2864 = CARTESIAN_POINT('',(2.49,-1.125,0.2));
+#2865 = LINE('',#2866,#2867);
+#2866 = CARTESIAN_POINT('',(2.49,-1.125,1.E-002));
+#2867 = VECTOR('',#2868,1.);
+#2868 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2869 = ORIENTED_EDGE('',*,*,#2870,.T.);
+#2870 = EDGE_CURVE('',#2863,#2871,#2873,.T.);
+#2871 = VERTEX_POINT('',#2872);
+#2872 = CARTESIAN_POINT('',(2.49,-0.875,0.2));
+#2873 = LINE('',#2874,#2875);
+#2874 = CARTESIAN_POINT('',(2.49,0.8075,0.2));
+#2875 = VECTOR('',#2876,1.);
+#2876 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2877 = ORIENTED_EDGE('',*,*,#2878,.T.);
+#2878 = EDGE_CURVE('',#2871,#714,#2879,.T.);
+#2879 = LINE('',#2880,#2881);
+#2880 = CARTESIAN_POINT('',(2.49,-0.875,1.E-002));
+#2881 = VECTOR('',#2882,1.);
+#2882 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2883 = ORIENTED_EDGE('',*,*,#721,.F.);
+#2884 = ORIENTED_EDGE('',*,*,#2885,.T.);
+#2885 = EDGE_CURVE('',#722,#2886,#2888,.T.);
+#2886 = VERTEX_POINT('',#2887);
+#2887 = CARTESIAN_POINT('',(2.49,-0.625,0.2));
+#2888 = LINE('',#2889,#2890);
+#2889 = CARTESIAN_POINT('',(2.49,-0.625,1.E-002));
+#2890 = VECTOR('',#2891,1.);
+#2891 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2892 = ORIENTED_EDGE('',*,*,#2893,.T.);
+#2893 = EDGE_CURVE('',#2886,#2894,#2896,.T.);
+#2894 = VERTEX_POINT('',#2895);
+#2895 = CARTESIAN_POINT('',(2.49,-0.375,0.2));
+#2896 = LINE('',#2897,#2898);
+#2897 = CARTESIAN_POINT('',(2.49,1.0575,0.2));
+#2898 = VECTOR('',#2899,1.);
+#2899 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2900 = ORIENTED_EDGE('',*,*,#2901,.T.);
+#2901 = EDGE_CURVE('',#2894,#747,#2902,.T.);
+#2902 = LINE('',#2903,#2904);
+#2903 = CARTESIAN_POINT('',(2.49,-0.375,1.E-002));
+#2904 = VECTOR('',#2905,1.);
+#2905 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2906 = ORIENTED_EDGE('',*,*,#754,.F.);
+#2907 = ORIENTED_EDGE('',*,*,#2908,.T.);
+#2908 = EDGE_CURVE('',#755,#2909,#2911,.T.);
+#2909 = VERTEX_POINT('',#2910);
+#2910 = CARTESIAN_POINT('',(2.49,-0.125,0.2));
+#2911 = LINE('',#2912,#2913);
+#2912 = CARTESIAN_POINT('',(2.49,-0.125,1.E-002));
+#2913 = VECTOR('',#2914,1.);
+#2914 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2915 = ORIENTED_EDGE('',*,*,#2916,.T.);
+#2916 = EDGE_CURVE('',#2909,#2917,#2919,.T.);
+#2917 = VERTEX_POINT('',#2918);
+#2918 = CARTESIAN_POINT('',(2.49,0.125,0.2));
+#2919 = LINE('',#2920,#2921);
+#2920 = CARTESIAN_POINT('',(2.49,1.3075,0.2));
+#2921 = VECTOR('',#2922,1.);
+#2922 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2923 = ORIENTED_EDGE('',*,*,#2924,.T.);
+#2924 = EDGE_CURVE('',#2917,#780,#2925,.T.);
+#2925 = LINE('',#2926,#2927);
+#2926 = CARTESIAN_POINT('',(2.49,0.125,1.E-002));
+#2927 = VECTOR('',#2928,1.);
+#2928 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2929 = ORIENTED_EDGE('',*,*,#787,.F.);
+#2930 = ORIENTED_EDGE('',*,*,#2931,.T.);
+#2931 = EDGE_CURVE('',#788,#2932,#2934,.T.);
+#2932 = VERTEX_POINT('',#2933);
+#2933 = CARTESIAN_POINT('',(2.49,0.375,0.2));
+#2934 = LINE('',#2935,#2936);
+#2935 = CARTESIAN_POINT('',(2.49,0.375,1.E-002));
+#2936 = VECTOR('',#2937,1.);
+#2937 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2938 = ORIENTED_EDGE('',*,*,#2939,.T.);
+#2939 = EDGE_CURVE('',#2932,#2940,#2942,.T.);
+#2940 = VERTEX_POINT('',#2941);
+#2941 = CARTESIAN_POINT('',(2.49,0.625,0.2));
+#2942 = LINE('',#2943,#2944);
+#2943 = CARTESIAN_POINT('',(2.49,1.5575,0.2));
+#2944 = VECTOR('',#2945,1.);
+#2945 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2946 = ORIENTED_EDGE('',*,*,#2947,.T.);
+#2947 = EDGE_CURVE('',#2940,#813,#2948,.T.);
+#2948 = LINE('',#2949,#2950);
+#2949 = CARTESIAN_POINT('',(2.49,0.625,1.E-002));
+#2950 = VECTOR('',#2951,1.);
+#2951 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2952 = ORIENTED_EDGE('',*,*,#820,.F.);
+#2953 = ORIENTED_EDGE('',*,*,#2954,.T.);
+#2954 = EDGE_CURVE('',#821,#2955,#2957,.T.);
+#2955 = VERTEX_POINT('',#2956);
+#2956 = CARTESIAN_POINT('',(2.49,0.875,0.2));
+#2957 = LINE('',#2958,#2959);
+#2958 = CARTESIAN_POINT('',(2.49,0.875,1.E-002));
+#2959 = VECTOR('',#2960,1.);
+#2960 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2961 = ORIENTED_EDGE('',*,*,#2962,.T.);
+#2962 = EDGE_CURVE('',#2955,#2963,#2965,.T.);
+#2963 = VERTEX_POINT('',#2964);
+#2964 = CARTESIAN_POINT('',(2.49,1.125,0.2));
+#2965 = LINE('',#2966,#2967);
+#2966 = CARTESIAN_POINT('',(2.49,1.8075,0.2));
+#2967 = VECTOR('',#2968,1.);
+#2968 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2969 = ORIENTED_EDGE('',*,*,#2970,.T.);
+#2970 = EDGE_CURVE('',#2963,#846,#2971,.T.);
+#2971 = LINE('',#2972,#2973);
+#2972 = CARTESIAN_POINT('',(2.49,1.125,1.E-002));
+#2973 = VECTOR('',#2974,1.);
+#2974 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2975 = ORIENTED_EDGE('',*,*,#853,.F.);
+#2976 = ORIENTED_EDGE('',*,*,#2977,.T.);
+#2977 = EDGE_CURVE('',#854,#2978,#2980,.T.);
+#2978 = VERTEX_POINT('',#2979);
+#2979 = CARTESIAN_POINT('',(2.49,1.375,0.2));
+#2980 = LINE('',#2981,#2982);
+#2981 = CARTESIAN_POINT('',(2.49,1.375,1.E-002));
+#2982 = VECTOR('',#2983,1.);
+#2983 = DIRECTION('',(0.E+000,0.E+000,1.));
+#2984 = ORIENTED_EDGE('',*,*,#2985,.T.);
+#2985 = EDGE_CURVE('',#2978,#2986,#2988,.T.);
+#2986 = VERTEX_POINT('',#2987);
+#2987 = CARTESIAN_POINT('',(2.49,1.625,0.2));
+#2988 = LINE('',#2989,#2990);
+#2989 = CARTESIAN_POINT('',(2.49,2.0575,0.2));
+#2990 = VECTOR('',#2991,1.);
+#2991 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#2992 = ORIENTED_EDGE('',*,*,#2993,.T.);
+#2993 = EDGE_CURVE('',#2986,#879,#2994,.T.);
+#2994 = LINE('',#2995,#2996);
+#2995 = CARTESIAN_POINT('',(2.49,1.625,1.E-002));
+#2996 = VECTOR('',#2997,1.);
+#2997 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#2998 = PLANE('',#2999);
+#2999 = AXIS2_PLACEMENT_3D('',#3000,#3001,#3002);
+#3000 = CARTESIAN_POINT('',(2.49,2.49,2.E-002));
+#3001 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3002 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3003 = ADVANCED_FACE('',(#3004),#3176,.T.);
+#3004 = FACE_BOUND('',#3005,.T.);
+#3005 = EDGE_LOOP('',(#3006,#3012,#3013,#3014,#3022,#3030,#3036,#3037,
+#3045,#3053,#3059,#3060,#3068,#3076,#3082,#3083,#3091,#3099,#3105,
+#3106,#3114,#3122,#3128,#3129,#3137,#3145,#3151,#3152,#3160,#3168,
+#3174,#3175));
+#3006 = ORIENTED_EDGE('',*,*,#3007,.F.);
+#3007 = EDGE_CURVE('',#1183,#2825,#3008,.T.);
+#3008 = LINE('',#3009,#3010);
+#3009 = CARTESIAN_POINT('',(-2.49,-2.49,0.92));
+#3010 = VECTOR('',#3011,1.);
+#3011 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3012 = ORIENTED_EDGE('',*,*,#1190,.F.);
+#3013 = ORIENTED_EDGE('',*,*,#416,.T.);
+#3014 = ORIENTED_EDGE('',*,*,#3015,.T.);
+#3015 = EDGE_CURVE('',#417,#3016,#3018,.T.);
+#3016 = VERTEX_POINT('',#3017);
+#3017 = CARTESIAN_POINT('',(-1.625,-2.49,0.2));
+#3018 = LINE('',#3019,#3020);
+#3019 = CARTESIAN_POINT('',(-1.625,-2.49,1.E-002));
+#3020 = VECTOR('',#3021,1.);
+#3021 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3022 = ORIENTED_EDGE('',*,*,#3023,.T.);
+#3023 = EDGE_CURVE('',#3016,#3024,#3026,.T.);
+#3024 = VERTEX_POINT('',#3025);
+#3025 = CARTESIAN_POINT('',(-1.375,-2.49,0.2));
+#3026 = LINE('',#3027,#3028);
+#3027 = CARTESIAN_POINT('',(-1.9325,-2.49,0.2));
+#3028 = VECTOR('',#3029,1.);
+#3029 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3030 = ORIENTED_EDGE('',*,*,#3031,.T.);
+#3031 = EDGE_CURVE('',#3024,#442,#3032,.T.);
+#3032 = LINE('',#3033,#3034);
+#3033 = CARTESIAN_POINT('',(-1.375,-2.49,1.E-002));
+#3034 = VECTOR('',#3035,1.);
+#3035 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3036 = ORIENTED_EDGE('',*,*,#449,.T.);
+#3037 = ORIENTED_EDGE('',*,*,#3038,.T.);
+#3038 = EDGE_CURVE('',#450,#3039,#3041,.T.);
+#3039 = VERTEX_POINT('',#3040);
+#3040 = CARTESIAN_POINT('',(-1.125,-2.49,0.2));
+#3041 = LINE('',#3042,#3043);
+#3042 = CARTESIAN_POINT('',(-1.125,-2.49,1.E-002));
+#3043 = VECTOR('',#3044,1.);
+#3044 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3045 = ORIENTED_EDGE('',*,*,#3046,.T.);
+#3046 = EDGE_CURVE('',#3039,#3047,#3049,.T.);
+#3047 = VERTEX_POINT('',#3048);
+#3048 = CARTESIAN_POINT('',(-0.875,-2.49,0.2));
+#3049 = LINE('',#3050,#3051);
+#3050 = CARTESIAN_POINT('',(-1.6825,-2.49,0.2));
+#3051 = VECTOR('',#3052,1.);
+#3052 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3053 = ORIENTED_EDGE('',*,*,#3054,.T.);
+#3054 = EDGE_CURVE('',#3047,#475,#3055,.T.);
+#3055 = LINE('',#3056,#3057);
+#3056 = CARTESIAN_POINT('',(-0.875,-2.49,1.E-002));
+#3057 = VECTOR('',#3058,1.);
+#3058 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3059 = ORIENTED_EDGE('',*,*,#482,.T.);
+#3060 = ORIENTED_EDGE('',*,*,#3061,.T.);
+#3061 = EDGE_CURVE('',#483,#3062,#3064,.T.);
+#3062 = VERTEX_POINT('',#3063);
+#3063 = CARTESIAN_POINT('',(-0.625,-2.49,0.2));
+#3064 = LINE('',#3065,#3066);
+#3065 = CARTESIAN_POINT('',(-0.625,-2.49,1.E-002));
+#3066 = VECTOR('',#3067,1.);
+#3067 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3068 = ORIENTED_EDGE('',*,*,#3069,.T.);
+#3069 = EDGE_CURVE('',#3062,#3070,#3072,.T.);
+#3070 = VERTEX_POINT('',#3071);
+#3071 = CARTESIAN_POINT('',(-0.375,-2.49,0.2));
+#3072 = LINE('',#3073,#3074);
+#3073 = CARTESIAN_POINT('',(-1.4325,-2.49,0.2));
+#3074 = VECTOR('',#3075,1.);
+#3075 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3076 = ORIENTED_EDGE('',*,*,#3077,.T.);
+#3077 = EDGE_CURVE('',#3070,#508,#3078,.T.);
+#3078 = LINE('',#3079,#3080);
+#3079 = CARTESIAN_POINT('',(-0.375,-2.49,1.E-002));
+#3080 = VECTOR('',#3081,1.);
+#3081 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3082 = ORIENTED_EDGE('',*,*,#515,.T.);
+#3083 = ORIENTED_EDGE('',*,*,#3084,.T.);
+#3084 = EDGE_CURVE('',#516,#3085,#3087,.T.);
+#3085 = VERTEX_POINT('',#3086);
+#3086 = CARTESIAN_POINT('',(-0.125,-2.49,0.2));
+#3087 = LINE('',#3088,#3089);
+#3088 = CARTESIAN_POINT('',(-0.125,-2.49,1.E-002));
+#3089 = VECTOR('',#3090,1.);
+#3090 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3091 = ORIENTED_EDGE('',*,*,#3092,.T.);
+#3092 = EDGE_CURVE('',#3085,#3093,#3095,.T.);
+#3093 = VERTEX_POINT('',#3094);
+#3094 = CARTESIAN_POINT('',(0.125,-2.49,0.2));
+#3095 = LINE('',#3096,#3097);
+#3096 = CARTESIAN_POINT('',(-1.1825,-2.49,0.2));
+#3097 = VECTOR('',#3098,1.);
+#3098 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3099 = ORIENTED_EDGE('',*,*,#3100,.T.);
+#3100 = EDGE_CURVE('',#3093,#541,#3101,.T.);
+#3101 = LINE('',#3102,#3103);
+#3102 = CARTESIAN_POINT('',(0.125,-2.49,1.E-002));
+#3103 = VECTOR('',#3104,1.);
+#3104 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3105 = ORIENTED_EDGE('',*,*,#548,.T.);
+#3106 = ORIENTED_EDGE('',*,*,#3107,.T.);
+#3107 = EDGE_CURVE('',#549,#3108,#3110,.T.);
+#3108 = VERTEX_POINT('',#3109);
+#3109 = CARTESIAN_POINT('',(0.375,-2.49,0.2));
+#3110 = LINE('',#3111,#3112);
+#3111 = CARTESIAN_POINT('',(0.375,-2.49,1.E-002));
+#3112 = VECTOR('',#3113,1.);
+#3113 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3114 = ORIENTED_EDGE('',*,*,#3115,.T.);
+#3115 = EDGE_CURVE('',#3108,#3116,#3118,.T.);
+#3116 = VERTEX_POINT('',#3117);
+#3117 = CARTESIAN_POINT('',(0.625,-2.49,0.2));
+#3118 = LINE('',#3119,#3120);
+#3119 = CARTESIAN_POINT('',(-0.9325,-2.49,0.2));
+#3120 = VECTOR('',#3121,1.);
+#3121 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3122 = ORIENTED_EDGE('',*,*,#3123,.T.);
+#3123 = EDGE_CURVE('',#3116,#574,#3124,.T.);
+#3124 = LINE('',#3125,#3126);
+#3125 = CARTESIAN_POINT('',(0.625,-2.49,1.E-002));
+#3126 = VECTOR('',#3127,1.);
+#3127 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3128 = ORIENTED_EDGE('',*,*,#581,.T.);
+#3129 = ORIENTED_EDGE('',*,*,#3130,.T.);
+#3130 = EDGE_CURVE('',#582,#3131,#3133,.T.);
+#3131 = VERTEX_POINT('',#3132);
+#3132 = CARTESIAN_POINT('',(0.875,-2.49,0.2));
+#3133 = LINE('',#3134,#3135);
+#3134 = CARTESIAN_POINT('',(0.875,-2.49,1.E-002));
+#3135 = VECTOR('',#3136,1.);
+#3136 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3137 = ORIENTED_EDGE('',*,*,#3138,.T.);
+#3138 = EDGE_CURVE('',#3131,#3139,#3141,.T.);
+#3139 = VERTEX_POINT('',#3140);
+#3140 = CARTESIAN_POINT('',(1.125,-2.49,0.2));
+#3141 = LINE('',#3142,#3143);
+#3142 = CARTESIAN_POINT('',(-0.6825,-2.49,0.2));
+#3143 = VECTOR('',#3144,1.);
+#3144 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3145 = ORIENTED_EDGE('',*,*,#3146,.T.);
+#3146 = EDGE_CURVE('',#3139,#607,#3147,.T.);
+#3147 = LINE('',#3148,#3149);
+#3148 = CARTESIAN_POINT('',(1.125,-2.49,1.E-002));
+#3149 = VECTOR('',#3150,1.);
+#3150 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3151 = ORIENTED_EDGE('',*,*,#614,.T.);
+#3152 = ORIENTED_EDGE('',*,*,#3153,.T.);
+#3153 = EDGE_CURVE('',#615,#3154,#3156,.T.);
+#3154 = VERTEX_POINT('',#3155);
+#3155 = CARTESIAN_POINT('',(1.375,-2.49,0.2));
+#3156 = LINE('',#3157,#3158);
+#3157 = CARTESIAN_POINT('',(1.375,-2.49,1.E-002));
+#3158 = VECTOR('',#3159,1.);
+#3159 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3160 = ORIENTED_EDGE('',*,*,#3161,.T.);
+#3161 = EDGE_CURVE('',#3154,#3162,#3164,.T.);
+#3162 = VERTEX_POINT('',#3163);
+#3163 = CARTESIAN_POINT('',(1.625,-2.49,0.2));
+#3164 = LINE('',#3165,#3166);
+#3165 = CARTESIAN_POINT('',(-0.4325,-2.49,0.2));
+#3166 = VECTOR('',#3167,1.);
+#3167 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#3168 = ORIENTED_EDGE('',*,*,#3169,.T.);
+#3169 = EDGE_CURVE('',#3162,#640,#3170,.T.);
+#3170 = LINE('',#3171,#3172);
+#3171 = CARTESIAN_POINT('',(1.625,-2.49,1.E-002));
+#3172 = VECTOR('',#3173,1.);
+#3173 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3174 = ORIENTED_EDGE('',*,*,#647,.T.);
+#3175 = ORIENTED_EDGE('',*,*,#2832,.T.);
+#3176 = PLANE('',#3177);
+#3177 = AXIS2_PLACEMENT_3D('',#3178,#3179,#3180);
+#3178 = CARTESIAN_POINT('',(-2.49,-2.49,2.E-002));
+#3179 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#3180 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3181 = ADVANCED_FACE('',(#3182),#3216,.F.);
+#3182 = FACE_BOUND('',#3183,.F.);
+#3183 = EDGE_LOOP('',(#3184,#3194,#3202,#3208,#3209,#3210));
+#3184 = ORIENTED_EDGE('',*,*,#3185,.F.);
+#3185 = EDGE_CURVE('',#3186,#3188,#3190,.T.);
+#3186 = VERTEX_POINT('',#3187);
+#3187 = CARTESIAN_POINT('',(2.5,1.625,0.E+000));
+#3188 = VERTEX_POINT('',#3189);
+#3189 = CARTESIAN_POINT('',(2.225,1.625,0.E+000));
+#3190 = LINE('',#3191,#3192);
+#3191 = CARTESIAN_POINT('',(2.5,1.625,0.E+000));
+#3192 = VECTOR('',#3193,1.);
+#3193 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3194 = ORIENTED_EDGE('',*,*,#3195,.T.);
+#3195 = EDGE_CURVE('',#3186,#3196,#3198,.T.);
+#3196 = VERTEX_POINT('',#3197);
+#3197 = CARTESIAN_POINT('',(2.5,1.625,0.2));
+#3198 = LINE('',#3199,#3200);
+#3199 = CARTESIAN_POINT('',(2.5,1.625,0.E+000));
+#3200 = VECTOR('',#3201,1.);
+#3201 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3202 = ORIENTED_EDGE('',*,*,#3203,.T.);
+#3203 = EDGE_CURVE('',#3196,#2986,#3204,.T.);
+#3204 = LINE('',#3205,#3206);
+#3205 = CARTESIAN_POINT('',(2.5,1.625,0.2));
+#3206 = VECTOR('',#3207,1.);
+#3207 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3208 = ORIENTED_EDGE('',*,*,#2993,.T.);
+#3209 = ORIENTED_EDGE('',*,*,#878,.F.);
+#3210 = ORIENTED_EDGE('',*,*,#3211,.F.);
+#3211 = EDGE_CURVE('',#3188,#870,#3212,.T.);
+#3212 = LINE('',#3213,#3214);
+#3213 = CARTESIAN_POINT('',(2.225,1.625,0.E+000));
+#3214 = VECTOR('',#3215,1.);
+#3215 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3216 = PLANE('',#3217);
+#3217 = AXIS2_PLACEMENT_3D('',#3218,#3219,#3220);
+#3218 = CARTESIAN_POINT('',(2.5,1.625,0.E+000));
+#3219 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#3220 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3221 = ADVANCED_FACE('',(#3222),#3256,.F.);
+#3222 = FACE_BOUND('',#3223,.F.);
+#3223 = EDGE_LOOP('',(#3224,#3234,#3240,#3241,#3242,#3250));
+#3224 = ORIENTED_EDGE('',*,*,#3225,.F.);
+#3225 = EDGE_CURVE('',#3226,#3228,#3230,.T.);
+#3226 = VERTEX_POINT('',#3227);
+#3227 = CARTESIAN_POINT('',(-1.625,-2.225,0.E+000));
+#3228 = VERTEX_POINT('',#3229);
+#3229 = CARTESIAN_POINT('',(-1.625,-2.5,0.E+000));
+#3230 = LINE('',#3231,#3232);
+#3231 = CARTESIAN_POINT('',(-1.625,-2.225,0.E+000));
+#3232 = VECTOR('',#3233,1.);
+#3233 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3234 = ORIENTED_EDGE('',*,*,#3235,.T.);
+#3235 = EDGE_CURVE('',#3226,#425,#3236,.T.);
+#3236 = LINE('',#3237,#3238);
+#3237 = CARTESIAN_POINT('',(-1.625,-2.225,0.E+000));
+#3238 = VECTOR('',#3239,1.);
+#3239 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3240 = ORIENTED_EDGE('',*,*,#424,.F.);
+#3241 = ORIENTED_EDGE('',*,*,#3015,.T.);
+#3242 = ORIENTED_EDGE('',*,*,#3243,.T.);
+#3243 = EDGE_CURVE('',#3016,#3244,#3246,.T.);
+#3244 = VERTEX_POINT('',#3245);
+#3245 = CARTESIAN_POINT('',(-1.625,-2.5,0.2));
+#3246 = LINE('',#3247,#3248);
+#3247 = CARTESIAN_POINT('',(-1.625,-2.225,0.2));
+#3248 = VECTOR('',#3249,1.);
+#3249 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3250 = ORIENTED_EDGE('',*,*,#3251,.F.);
+#3251 = EDGE_CURVE('',#3228,#3244,#3252,.T.);
+#3252 = LINE('',#3253,#3254);
+#3253 = CARTESIAN_POINT('',(-1.625,-2.5,0.E+000));
+#3254 = VECTOR('',#3255,1.);
+#3255 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3256 = PLANE('',#3257);
+#3257 = AXIS2_PLACEMENT_3D('',#3258,#3259,#3260);
+#3258 = CARTESIAN_POINT('',(-1.625,-2.225,0.E+000));
+#3259 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3260 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3261 = ADVANCED_FACE('',(#3262),#3281,.T.);
+#3262 = FACE_BOUND('',#3263,.F.);
+#3263 = EDGE_LOOP('',(#3264,#3273,#3274,#3275));
+#3264 = ORIENTED_EDGE('',*,*,#3265,.F.);
+#3265 = EDGE_CURVE('',#3188,#3266,#3268,.T.);
+#3266 = VERTEX_POINT('',#3267);
+#3267 = CARTESIAN_POINT('',(2.225,1.375,0.E+000));
+#3268 = CIRCLE('',#3269,0.125);
+#3269 = AXIS2_PLACEMENT_3D('',#3270,#3271,#3272);
+#3270 = CARTESIAN_POINT('',(2.225,1.5,0.E+000));
+#3271 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#3272 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3273 = ORIENTED_EDGE('',*,*,#3211,.T.);
+#3274 = ORIENTED_EDGE('',*,*,#869,.F.);
+#3275 = ORIENTED_EDGE('',*,*,#3276,.F.);
+#3276 = EDGE_CURVE('',#3266,#862,#3277,.T.);
+#3277 = LINE('',#3278,#3279);
+#3278 = CARTESIAN_POINT('',(2.225,1.375,0.E+000));
+#3279 = VECTOR('',#3280,1.);
+#3280 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3281 = CYLINDRICAL_SURFACE('',#3282,0.125);
+#3282 = AXIS2_PLACEMENT_3D('',#3283,#3284,#3285);
+#3283 = CARTESIAN_POINT('',(2.225,1.5,0.E+000));
+#3284 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#3285 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3286 = ADVANCED_FACE('',(#3287),#3306,.T.);
+#3287 = FACE_BOUND('',#3288,.F.);
+#3288 = EDGE_LOOP('',(#3289,#3298,#3304,#3305));
+#3289 = ORIENTED_EDGE('',*,*,#3290,.F.);
+#3290 = EDGE_CURVE('',#3291,#3226,#3293,.T.);
+#3291 = VERTEX_POINT('',#3292);
+#3292 = CARTESIAN_POINT('',(-1.375,-2.225,0.E+000));
+#3293 = CIRCLE('',#3294,0.125);
+#3294 = AXIS2_PLACEMENT_3D('',#3295,#3296,#3297);
+#3295 = CARTESIAN_POINT('',(-1.5,-2.225,0.E+000));
+#3296 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#3297 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3298 = ORIENTED_EDGE('',*,*,#3299,.T.);
+#3299 = EDGE_CURVE('',#3291,#433,#3300,.T.);
+#3300 = LINE('',#3301,#3302);
+#3301 = CARTESIAN_POINT('',(-1.375,-2.225,0.E+000));
+#3302 = VECTOR('',#3303,1.);
+#3303 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3304 = ORIENTED_EDGE('',*,*,#432,.F.);
+#3305 = ORIENTED_EDGE('',*,*,#3235,.F.);
+#3306 = CYLINDRICAL_SURFACE('',#3307,0.125);
+#3307 = AXIS2_PLACEMENT_3D('',#3308,#3309,#3310);
+#3308 = CARTESIAN_POINT('',(-1.5,-2.225,0.E+000));
+#3309 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3310 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3311 = ADVANCED_FACE('',(#3312),#3339,.F.);
+#3312 = FACE_BOUND('',#3313,.F.);
+#3313 = EDGE_LOOP('',(#3314,#3322,#3323,#3324,#3325,#3333));
+#3314 = ORIENTED_EDGE('',*,*,#3315,.F.);
+#3315 = EDGE_CURVE('',#3266,#3316,#3318,.T.);
+#3316 = VERTEX_POINT('',#3317);
+#3317 = CARTESIAN_POINT('',(2.5,1.375,0.E+000));
+#3318 = LINE('',#3319,#3320);
+#3319 = CARTESIAN_POINT('',(2.225,1.375,0.E+000));
+#3320 = VECTOR('',#3321,1.);
+#3321 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3322 = ORIENTED_EDGE('',*,*,#3276,.T.);
+#3323 = ORIENTED_EDGE('',*,*,#861,.F.);
+#3324 = ORIENTED_EDGE('',*,*,#2977,.T.);
+#3325 = ORIENTED_EDGE('',*,*,#3326,.T.);
+#3326 = EDGE_CURVE('',#2978,#3327,#3329,.T.);
+#3327 = VERTEX_POINT('',#3328);
+#3328 = CARTESIAN_POINT('',(2.5,1.375,0.2));
+#3329 = LINE('',#3330,#3331);
+#3330 = CARTESIAN_POINT('',(2.225,1.375,0.2));
+#3331 = VECTOR('',#3332,1.);
+#3332 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3333 = ORIENTED_EDGE('',*,*,#3334,.F.);
+#3334 = EDGE_CURVE('',#3316,#3327,#3335,.T.);
+#3335 = LINE('',#3336,#3337);
+#3336 = CARTESIAN_POINT('',(2.5,1.375,0.E+000));
+#3337 = VECTOR('',#3338,1.);
+#3338 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3339 = PLANE('',#3340);
+#3340 = AXIS2_PLACEMENT_3D('',#3341,#3342,#3343);
+#3341 = CARTESIAN_POINT('',(2.225,1.375,0.E+000));
+#3342 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3343 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3344 = ADVANCED_FACE('',(#3345),#3372,.F.);
+#3345 = FACE_BOUND('',#3346,.F.);
+#3346 = EDGE_LOOP('',(#3347,#3355,#3363,#3369,#3370,#3371));
+#3347 = ORIENTED_EDGE('',*,*,#3348,.F.);
+#3348 = EDGE_CURVE('',#3349,#3291,#3351,.T.);
+#3349 = VERTEX_POINT('',#3350);
+#3350 = CARTESIAN_POINT('',(-1.375,-2.5,0.E+000));
+#3351 = LINE('',#3352,#3353);
+#3352 = CARTESIAN_POINT('',(-1.375,-2.5,0.E+000));
+#3353 = VECTOR('',#3354,1.);
+#3354 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3355 = ORIENTED_EDGE('',*,*,#3356,.T.);
+#3356 = EDGE_CURVE('',#3349,#3357,#3359,.T.);
+#3357 = VERTEX_POINT('',#3358);
+#3358 = CARTESIAN_POINT('',(-1.375,-2.5,0.2));
+#3359 = LINE('',#3360,#3361);
+#3360 = CARTESIAN_POINT('',(-1.375,-2.5,0.E+000));
+#3361 = VECTOR('',#3362,1.);
+#3362 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3363 = ORIENTED_EDGE('',*,*,#3364,.T.);
+#3364 = EDGE_CURVE('',#3357,#3024,#3365,.T.);
+#3365 = LINE('',#3366,#3367);
+#3366 = CARTESIAN_POINT('',(-1.375,-2.5,0.2));
+#3367 = VECTOR('',#3368,1.);
+#3368 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3369 = ORIENTED_EDGE('',*,*,#3031,.T.);
+#3370 = ORIENTED_EDGE('',*,*,#441,.F.);
+#3371 = ORIENTED_EDGE('',*,*,#3299,.F.);
+#3372 = PLANE('',#3373);
+#3373 = AXIS2_PLACEMENT_3D('',#3374,#3375,#3376);
+#3374 = CARTESIAN_POINT('',(-1.375,-2.5,0.E+000));
+#3375 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#3376 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3377 = ADVANCED_FACE('',(#3378),#3412,.F.);
+#3378 = FACE_BOUND('',#3379,.F.);
+#3379 = EDGE_LOOP('',(#3380,#3390,#3398,#3404,#3405,#3406));
+#3380 = ORIENTED_EDGE('',*,*,#3381,.F.);
+#3381 = EDGE_CURVE('',#3382,#3384,#3386,.T.);
+#3382 = VERTEX_POINT('',#3383);
+#3383 = CARTESIAN_POINT('',(2.5,1.125,0.E+000));
+#3384 = VERTEX_POINT('',#3385);
+#3385 = CARTESIAN_POINT('',(2.225,1.125,0.E+000));
+#3386 = LINE('',#3387,#3388);
+#3387 = CARTESIAN_POINT('',(2.5,1.125,0.E+000));
+#3388 = VECTOR('',#3389,1.);
+#3389 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3390 = ORIENTED_EDGE('',*,*,#3391,.T.);
+#3391 = EDGE_CURVE('',#3382,#3392,#3394,.T.);
+#3392 = VERTEX_POINT('',#3393);
+#3393 = CARTESIAN_POINT('',(2.5,1.125,0.2));
+#3394 = LINE('',#3395,#3396);
+#3395 = CARTESIAN_POINT('',(2.5,1.125,0.E+000));
+#3396 = VECTOR('',#3397,1.);
+#3397 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3398 = ORIENTED_EDGE('',*,*,#3399,.T.);
+#3399 = EDGE_CURVE('',#3392,#2963,#3400,.T.);
+#3400 = LINE('',#3401,#3402);
+#3401 = CARTESIAN_POINT('',(2.5,1.125,0.2));
+#3402 = VECTOR('',#3403,1.);
+#3403 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3404 = ORIENTED_EDGE('',*,*,#2970,.T.);
+#3405 = ORIENTED_EDGE('',*,*,#845,.F.);
+#3406 = ORIENTED_EDGE('',*,*,#3407,.F.);
+#3407 = EDGE_CURVE('',#3384,#837,#3408,.T.);
+#3408 = LINE('',#3409,#3410);
+#3409 = CARTESIAN_POINT('',(2.225,1.125,0.E+000));
+#3410 = VECTOR('',#3411,1.);
+#3411 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3412 = PLANE('',#3413);
+#3413 = AXIS2_PLACEMENT_3D('',#3414,#3415,#3416);
+#3414 = CARTESIAN_POINT('',(2.5,1.125,0.E+000));
+#3415 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#3416 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3417 = ADVANCED_FACE('',(#3418),#3452,.F.);
+#3418 = FACE_BOUND('',#3419,.F.);
+#3419 = EDGE_LOOP('',(#3420,#3430,#3436,#3437,#3438,#3446));
+#3420 = ORIENTED_EDGE('',*,*,#3421,.F.);
+#3421 = EDGE_CURVE('',#3422,#3424,#3426,.T.);
+#3422 = VERTEX_POINT('',#3423);
+#3423 = CARTESIAN_POINT('',(-1.125,-2.225,0.E+000));
+#3424 = VERTEX_POINT('',#3425);
+#3425 = CARTESIAN_POINT('',(-1.125,-2.5,0.E+000));
+#3426 = LINE('',#3427,#3428);
+#3427 = CARTESIAN_POINT('',(-1.125,-2.225,0.E+000));
+#3428 = VECTOR('',#3429,1.);
+#3429 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3430 = ORIENTED_EDGE('',*,*,#3431,.T.);
+#3431 = EDGE_CURVE('',#3422,#458,#3432,.T.);
+#3432 = LINE('',#3433,#3434);
+#3433 = CARTESIAN_POINT('',(-1.125,-2.225,0.E+000));
+#3434 = VECTOR('',#3435,1.);
+#3435 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3436 = ORIENTED_EDGE('',*,*,#457,.F.);
+#3437 = ORIENTED_EDGE('',*,*,#3038,.T.);
+#3438 = ORIENTED_EDGE('',*,*,#3439,.T.);
+#3439 = EDGE_CURVE('',#3039,#3440,#3442,.T.);
+#3440 = VERTEX_POINT('',#3441);
+#3441 = CARTESIAN_POINT('',(-1.125,-2.5,0.2));
+#3442 = LINE('',#3443,#3444);
+#3443 = CARTESIAN_POINT('',(-1.125,-2.225,0.2));
+#3444 = VECTOR('',#3445,1.);
+#3445 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3446 = ORIENTED_EDGE('',*,*,#3447,.F.);
+#3447 = EDGE_CURVE('',#3424,#3440,#3448,.T.);
+#3448 = LINE('',#3449,#3450);
+#3449 = CARTESIAN_POINT('',(-1.125,-2.5,0.E+000));
+#3450 = VECTOR('',#3451,1.);
+#3451 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3452 = PLANE('',#3453);
+#3453 = AXIS2_PLACEMENT_3D('',#3454,#3455,#3456);
+#3454 = CARTESIAN_POINT('',(-1.125,-2.225,0.E+000));
+#3455 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3456 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3457 = ADVANCED_FACE('',(#3458),#3477,.T.);
+#3458 = FACE_BOUND('',#3459,.F.);
+#3459 = EDGE_LOOP('',(#3460,#3469,#3470,#3471));
+#3460 = ORIENTED_EDGE('',*,*,#3461,.F.);
+#3461 = EDGE_CURVE('',#3384,#3462,#3464,.T.);
+#3462 = VERTEX_POINT('',#3463);
+#3463 = CARTESIAN_POINT('',(2.225,0.875,0.E+000));
+#3464 = CIRCLE('',#3465,0.125);
+#3465 = AXIS2_PLACEMENT_3D('',#3466,#3467,#3468);
+#3466 = CARTESIAN_POINT('',(2.225,1.,0.E+000));
+#3467 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#3468 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3469 = ORIENTED_EDGE('',*,*,#3407,.T.);
+#3470 = ORIENTED_EDGE('',*,*,#836,.F.);
+#3471 = ORIENTED_EDGE('',*,*,#3472,.F.);
+#3472 = EDGE_CURVE('',#3462,#829,#3473,.T.);
+#3473 = LINE('',#3474,#3475);
+#3474 = CARTESIAN_POINT('',(2.225,0.875,0.E+000));
+#3475 = VECTOR('',#3476,1.);
+#3476 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3477 = CYLINDRICAL_SURFACE('',#3478,0.125);
+#3478 = AXIS2_PLACEMENT_3D('',#3479,#3480,#3481);
+#3479 = CARTESIAN_POINT('',(2.225,1.,0.E+000));
+#3480 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#3481 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3482 = ADVANCED_FACE('',(#3483),#3502,.T.);
+#3483 = FACE_BOUND('',#3484,.F.);
+#3484 = EDGE_LOOP('',(#3485,#3494,#3500,#3501));
+#3485 = ORIENTED_EDGE('',*,*,#3486,.F.);
+#3486 = EDGE_CURVE('',#3487,#3422,#3489,.T.);
+#3487 = VERTEX_POINT('',#3488);
+#3488 = CARTESIAN_POINT('',(-0.875,-2.225,0.E+000));
+#3489 = CIRCLE('',#3490,0.125);
+#3490 = AXIS2_PLACEMENT_3D('',#3491,#3492,#3493);
+#3491 = CARTESIAN_POINT('',(-1.,-2.225,0.E+000));
+#3492 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#3493 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3494 = ORIENTED_EDGE('',*,*,#3495,.T.);
+#3495 = EDGE_CURVE('',#3487,#466,#3496,.T.);
+#3496 = LINE('',#3497,#3498);
+#3497 = CARTESIAN_POINT('',(-0.875,-2.225,0.E+000));
+#3498 = VECTOR('',#3499,1.);
+#3499 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3500 = ORIENTED_EDGE('',*,*,#465,.F.);
+#3501 = ORIENTED_EDGE('',*,*,#3431,.F.);
+#3502 = CYLINDRICAL_SURFACE('',#3503,0.125);
+#3503 = AXIS2_PLACEMENT_3D('',#3504,#3505,#3506);
+#3504 = CARTESIAN_POINT('',(-1.,-2.225,0.E+000));
+#3505 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3506 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3507 = ADVANCED_FACE('',(#3508),#3535,.F.);
+#3508 = FACE_BOUND('',#3509,.F.);
+#3509 = EDGE_LOOP('',(#3510,#3518,#3519,#3520,#3521,#3529));
+#3510 = ORIENTED_EDGE('',*,*,#3511,.F.);
+#3511 = EDGE_CURVE('',#3462,#3512,#3514,.T.);
+#3512 = VERTEX_POINT('',#3513);
+#3513 = CARTESIAN_POINT('',(2.5,0.875,0.E+000));
+#3514 = LINE('',#3515,#3516);
+#3515 = CARTESIAN_POINT('',(2.225,0.875,0.E+000));
+#3516 = VECTOR('',#3517,1.);
+#3517 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3518 = ORIENTED_EDGE('',*,*,#3472,.T.);
+#3519 = ORIENTED_EDGE('',*,*,#828,.F.);
+#3520 = ORIENTED_EDGE('',*,*,#2954,.T.);
+#3521 = ORIENTED_EDGE('',*,*,#3522,.T.);
+#3522 = EDGE_CURVE('',#2955,#3523,#3525,.T.);
+#3523 = VERTEX_POINT('',#3524);
+#3524 = CARTESIAN_POINT('',(2.5,0.875,0.2));
+#3525 = LINE('',#3526,#3527);
+#3526 = CARTESIAN_POINT('',(2.225,0.875,0.2));
+#3527 = VECTOR('',#3528,1.);
+#3528 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3529 = ORIENTED_EDGE('',*,*,#3530,.F.);
+#3530 = EDGE_CURVE('',#3512,#3523,#3531,.T.);
+#3531 = LINE('',#3532,#3533);
+#3532 = CARTESIAN_POINT('',(2.5,0.875,0.E+000));
+#3533 = VECTOR('',#3534,1.);
+#3534 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3535 = PLANE('',#3536);
+#3536 = AXIS2_PLACEMENT_3D('',#3537,#3538,#3539);
+#3537 = CARTESIAN_POINT('',(2.225,0.875,0.E+000));
+#3538 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3539 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3540 = ADVANCED_FACE('',(#3541),#3568,.F.);
+#3541 = FACE_BOUND('',#3542,.F.);
+#3542 = EDGE_LOOP('',(#3543,#3551,#3559,#3565,#3566,#3567));
+#3543 = ORIENTED_EDGE('',*,*,#3544,.F.);
+#3544 = EDGE_CURVE('',#3545,#3487,#3547,.T.);
+#3545 = VERTEX_POINT('',#3546);
+#3546 = CARTESIAN_POINT('',(-0.875,-2.5,0.E+000));
+#3547 = LINE('',#3548,#3549);
+#3548 = CARTESIAN_POINT('',(-0.875,-2.5,0.E+000));
+#3549 = VECTOR('',#3550,1.);
+#3550 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3551 = ORIENTED_EDGE('',*,*,#3552,.T.);
+#3552 = EDGE_CURVE('',#3545,#3553,#3555,.T.);
+#3553 = VERTEX_POINT('',#3554);
+#3554 = CARTESIAN_POINT('',(-0.875,-2.5,0.2));
+#3555 = LINE('',#3556,#3557);
+#3556 = CARTESIAN_POINT('',(-0.875,-2.5,0.E+000));
+#3557 = VECTOR('',#3558,1.);
+#3558 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3559 = ORIENTED_EDGE('',*,*,#3560,.T.);
+#3560 = EDGE_CURVE('',#3553,#3047,#3561,.T.);
+#3561 = LINE('',#3562,#3563);
+#3562 = CARTESIAN_POINT('',(-0.875,-2.5,0.2));
+#3563 = VECTOR('',#3564,1.);
+#3564 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3565 = ORIENTED_EDGE('',*,*,#3054,.T.);
+#3566 = ORIENTED_EDGE('',*,*,#474,.F.);
+#3567 = ORIENTED_EDGE('',*,*,#3495,.F.);
+#3568 = PLANE('',#3569);
+#3569 = AXIS2_PLACEMENT_3D('',#3570,#3571,#3572);
+#3570 = CARTESIAN_POINT('',(-0.875,-2.5,0.E+000));
+#3571 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#3572 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3573 = ADVANCED_FACE('',(#3574),#3608,.F.);
+#3574 = FACE_BOUND('',#3575,.F.);
+#3575 = EDGE_LOOP('',(#3576,#3586,#3594,#3600,#3601,#3602));
+#3576 = ORIENTED_EDGE('',*,*,#3577,.F.);
+#3577 = EDGE_CURVE('',#3578,#3580,#3582,.T.);
+#3578 = VERTEX_POINT('',#3579);
+#3579 = CARTESIAN_POINT('',(2.5,0.625,0.E+000));
+#3580 = VERTEX_POINT('',#3581);
+#3581 = CARTESIAN_POINT('',(2.225,0.625,0.E+000));
+#3582 = LINE('',#3583,#3584);
+#3583 = CARTESIAN_POINT('',(2.5,0.625,0.E+000));
+#3584 = VECTOR('',#3585,1.);
+#3585 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3586 = ORIENTED_EDGE('',*,*,#3587,.T.);
+#3587 = EDGE_CURVE('',#3578,#3588,#3590,.T.);
+#3588 = VERTEX_POINT('',#3589);
+#3589 = CARTESIAN_POINT('',(2.5,0.625,0.2));
+#3590 = LINE('',#3591,#3592);
+#3591 = CARTESIAN_POINT('',(2.5,0.625,0.E+000));
+#3592 = VECTOR('',#3593,1.);
+#3593 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3594 = ORIENTED_EDGE('',*,*,#3595,.T.);
+#3595 = EDGE_CURVE('',#3588,#2940,#3596,.T.);
+#3596 = LINE('',#3597,#3598);
+#3597 = CARTESIAN_POINT('',(2.5,0.625,0.2));
+#3598 = VECTOR('',#3599,1.);
+#3599 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3600 = ORIENTED_EDGE('',*,*,#2947,.T.);
+#3601 = ORIENTED_EDGE('',*,*,#812,.F.);
+#3602 = ORIENTED_EDGE('',*,*,#3603,.F.);
+#3603 = EDGE_CURVE('',#3580,#804,#3604,.T.);
+#3604 = LINE('',#3605,#3606);
+#3605 = CARTESIAN_POINT('',(2.225,0.625,0.E+000));
+#3606 = VECTOR('',#3607,1.);
+#3607 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3608 = PLANE('',#3609);
+#3609 = AXIS2_PLACEMENT_3D('',#3610,#3611,#3612);
+#3610 = CARTESIAN_POINT('',(2.5,0.625,0.E+000));
+#3611 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#3612 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3613 = ADVANCED_FACE('',(#3614),#3648,.F.);
+#3614 = FACE_BOUND('',#3615,.F.);
+#3615 = EDGE_LOOP('',(#3616,#3626,#3632,#3633,#3634,#3642));
+#3616 = ORIENTED_EDGE('',*,*,#3617,.F.);
+#3617 = EDGE_CURVE('',#3618,#3620,#3622,.T.);
+#3618 = VERTEX_POINT('',#3619);
+#3619 = CARTESIAN_POINT('',(-0.625,-2.225,0.E+000));
+#3620 = VERTEX_POINT('',#3621);
+#3621 = CARTESIAN_POINT('',(-0.625,-2.5,0.E+000));
+#3622 = LINE('',#3623,#3624);
+#3623 = CARTESIAN_POINT('',(-0.625,-2.225,0.E+000));
+#3624 = VECTOR('',#3625,1.);
+#3625 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3626 = ORIENTED_EDGE('',*,*,#3627,.T.);
+#3627 = EDGE_CURVE('',#3618,#491,#3628,.T.);
+#3628 = LINE('',#3629,#3630);
+#3629 = CARTESIAN_POINT('',(-0.625,-2.225,0.E+000));
+#3630 = VECTOR('',#3631,1.);
+#3631 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3632 = ORIENTED_EDGE('',*,*,#490,.F.);
+#3633 = ORIENTED_EDGE('',*,*,#3061,.T.);
+#3634 = ORIENTED_EDGE('',*,*,#3635,.T.);
+#3635 = EDGE_CURVE('',#3062,#3636,#3638,.T.);
+#3636 = VERTEX_POINT('',#3637);
+#3637 = CARTESIAN_POINT('',(-0.625,-2.5,0.2));
+#3638 = LINE('',#3639,#3640);
+#3639 = CARTESIAN_POINT('',(-0.625,-2.225,0.2));
+#3640 = VECTOR('',#3641,1.);
+#3641 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3642 = ORIENTED_EDGE('',*,*,#3643,.F.);
+#3643 = EDGE_CURVE('',#3620,#3636,#3644,.T.);
+#3644 = LINE('',#3645,#3646);
+#3645 = CARTESIAN_POINT('',(-0.625,-2.5,0.E+000));
+#3646 = VECTOR('',#3647,1.);
+#3647 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3648 = PLANE('',#3649);
+#3649 = AXIS2_PLACEMENT_3D('',#3650,#3651,#3652);
+#3650 = CARTESIAN_POINT('',(-0.625,-2.225,0.E+000));
+#3651 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3652 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3653 = ADVANCED_FACE('',(#3654),#3673,.T.);
+#3654 = FACE_BOUND('',#3655,.F.);
+#3655 = EDGE_LOOP('',(#3656,#3665,#3666,#3667));
+#3656 = ORIENTED_EDGE('',*,*,#3657,.F.);
+#3657 = EDGE_CURVE('',#3580,#3658,#3660,.T.);
+#3658 = VERTEX_POINT('',#3659);
+#3659 = CARTESIAN_POINT('',(2.225,0.375,0.E+000));
+#3660 = CIRCLE('',#3661,0.125);
+#3661 = AXIS2_PLACEMENT_3D('',#3662,#3663,#3664);
+#3662 = CARTESIAN_POINT('',(2.225,0.5,0.E+000));
+#3663 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#3664 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3665 = ORIENTED_EDGE('',*,*,#3603,.T.);
+#3666 = ORIENTED_EDGE('',*,*,#803,.F.);
+#3667 = ORIENTED_EDGE('',*,*,#3668,.F.);
+#3668 = EDGE_CURVE('',#3658,#796,#3669,.T.);
+#3669 = LINE('',#3670,#3671);
+#3670 = CARTESIAN_POINT('',(2.225,0.375,0.E+000));
+#3671 = VECTOR('',#3672,1.);
+#3672 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3673 = CYLINDRICAL_SURFACE('',#3674,0.125);
+#3674 = AXIS2_PLACEMENT_3D('',#3675,#3676,#3677);
+#3675 = CARTESIAN_POINT('',(2.225,0.5,0.E+000));
+#3676 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#3677 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3678 = ADVANCED_FACE('',(#3679),#3698,.T.);
+#3679 = FACE_BOUND('',#3680,.F.);
+#3680 = EDGE_LOOP('',(#3681,#3690,#3696,#3697));
+#3681 = ORIENTED_EDGE('',*,*,#3682,.F.);
+#3682 = EDGE_CURVE('',#3683,#3618,#3685,.T.);
+#3683 = VERTEX_POINT('',#3684);
+#3684 = CARTESIAN_POINT('',(-0.375,-2.225,0.E+000));
+#3685 = CIRCLE('',#3686,0.125);
+#3686 = AXIS2_PLACEMENT_3D('',#3687,#3688,#3689);
+#3687 = CARTESIAN_POINT('',(-0.5,-2.225,0.E+000));
+#3688 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#3689 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3690 = ORIENTED_EDGE('',*,*,#3691,.T.);
+#3691 = EDGE_CURVE('',#3683,#499,#3692,.T.);
+#3692 = LINE('',#3693,#3694);
+#3693 = CARTESIAN_POINT('',(-0.375,-2.225,0.E+000));
+#3694 = VECTOR('',#3695,1.);
+#3695 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3696 = ORIENTED_EDGE('',*,*,#498,.F.);
+#3697 = ORIENTED_EDGE('',*,*,#3627,.F.);
+#3698 = CYLINDRICAL_SURFACE('',#3699,0.125);
+#3699 = AXIS2_PLACEMENT_3D('',#3700,#3701,#3702);
+#3700 = CARTESIAN_POINT('',(-0.5,-2.225,0.E+000));
+#3701 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3702 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3703 = ADVANCED_FACE('',(#3704),#3731,.F.);
+#3704 = FACE_BOUND('',#3705,.F.);
+#3705 = EDGE_LOOP('',(#3706,#3714,#3715,#3716,#3717,#3725));
+#3706 = ORIENTED_EDGE('',*,*,#3707,.F.);
+#3707 = EDGE_CURVE('',#3658,#3708,#3710,.T.);
+#3708 = VERTEX_POINT('',#3709);
+#3709 = CARTESIAN_POINT('',(2.5,0.375,0.E+000));
+#3710 = LINE('',#3711,#3712);
+#3711 = CARTESIAN_POINT('',(2.225,0.375,0.E+000));
+#3712 = VECTOR('',#3713,1.);
+#3713 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3714 = ORIENTED_EDGE('',*,*,#3668,.T.);
+#3715 = ORIENTED_EDGE('',*,*,#795,.F.);
+#3716 = ORIENTED_EDGE('',*,*,#2931,.T.);
+#3717 = ORIENTED_EDGE('',*,*,#3718,.T.);
+#3718 = EDGE_CURVE('',#2932,#3719,#3721,.T.);
+#3719 = VERTEX_POINT('',#3720);
+#3720 = CARTESIAN_POINT('',(2.5,0.375,0.2));
+#3721 = LINE('',#3722,#3723);
+#3722 = CARTESIAN_POINT('',(2.225,0.375,0.2));
+#3723 = VECTOR('',#3724,1.);
+#3724 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3725 = ORIENTED_EDGE('',*,*,#3726,.F.);
+#3726 = EDGE_CURVE('',#3708,#3719,#3727,.T.);
+#3727 = LINE('',#3728,#3729);
+#3728 = CARTESIAN_POINT('',(2.5,0.375,0.E+000));
+#3729 = VECTOR('',#3730,1.);
+#3730 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3731 = PLANE('',#3732);
+#3732 = AXIS2_PLACEMENT_3D('',#3733,#3734,#3735);
+#3733 = CARTESIAN_POINT('',(2.225,0.375,0.E+000));
+#3734 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3735 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3736 = ADVANCED_FACE('',(#3737),#3764,.F.);
+#3737 = FACE_BOUND('',#3738,.F.);
+#3738 = EDGE_LOOP('',(#3739,#3747,#3755,#3761,#3762,#3763));
+#3739 = ORIENTED_EDGE('',*,*,#3740,.F.);
+#3740 = EDGE_CURVE('',#3741,#3683,#3743,.T.);
+#3741 = VERTEX_POINT('',#3742);
+#3742 = CARTESIAN_POINT('',(-0.375,-2.5,0.E+000));
+#3743 = LINE('',#3744,#3745);
+#3744 = CARTESIAN_POINT('',(-0.375,-2.5,0.E+000));
+#3745 = VECTOR('',#3746,1.);
+#3746 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3747 = ORIENTED_EDGE('',*,*,#3748,.T.);
+#3748 = EDGE_CURVE('',#3741,#3749,#3751,.T.);
+#3749 = VERTEX_POINT('',#3750);
+#3750 = CARTESIAN_POINT('',(-0.375,-2.5,0.2));
+#3751 = LINE('',#3752,#3753);
+#3752 = CARTESIAN_POINT('',(-0.375,-2.5,0.E+000));
+#3753 = VECTOR('',#3754,1.);
+#3754 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3755 = ORIENTED_EDGE('',*,*,#3756,.T.);
+#3756 = EDGE_CURVE('',#3749,#3070,#3757,.T.);
+#3757 = LINE('',#3758,#3759);
+#3758 = CARTESIAN_POINT('',(-0.375,-2.5,0.2));
+#3759 = VECTOR('',#3760,1.);
+#3760 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3761 = ORIENTED_EDGE('',*,*,#3077,.T.);
+#3762 = ORIENTED_EDGE('',*,*,#507,.F.);
+#3763 = ORIENTED_EDGE('',*,*,#3691,.F.);
+#3764 = PLANE('',#3765);
+#3765 = AXIS2_PLACEMENT_3D('',#3766,#3767,#3768);
+#3766 = CARTESIAN_POINT('',(-0.375,-2.5,0.E+000));
+#3767 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#3768 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3769 = ADVANCED_FACE('',(#3770),#3804,.F.);
+#3770 = FACE_BOUND('',#3771,.F.);
+#3771 = EDGE_LOOP('',(#3772,#3782,#3790,#3796,#3797,#3798));
+#3772 = ORIENTED_EDGE('',*,*,#3773,.F.);
+#3773 = EDGE_CURVE('',#3774,#3776,#3778,.T.);
+#3774 = VERTEX_POINT('',#3775);
+#3775 = CARTESIAN_POINT('',(2.5,0.125,0.E+000));
+#3776 = VERTEX_POINT('',#3777);
+#3777 = CARTESIAN_POINT('',(2.225,0.125,0.E+000));
+#3778 = LINE('',#3779,#3780);
+#3779 = CARTESIAN_POINT('',(2.5,0.125,0.E+000));
+#3780 = VECTOR('',#3781,1.);
+#3781 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3782 = ORIENTED_EDGE('',*,*,#3783,.T.);
+#3783 = EDGE_CURVE('',#3774,#3784,#3786,.T.);
+#3784 = VERTEX_POINT('',#3785);
+#3785 = CARTESIAN_POINT('',(2.5,0.125,0.2));
+#3786 = LINE('',#3787,#3788);
+#3787 = CARTESIAN_POINT('',(2.5,0.125,0.E+000));
+#3788 = VECTOR('',#3789,1.);
+#3789 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3790 = ORIENTED_EDGE('',*,*,#3791,.T.);
+#3791 = EDGE_CURVE('',#3784,#2917,#3792,.T.);
+#3792 = LINE('',#3793,#3794);
+#3793 = CARTESIAN_POINT('',(2.5,0.125,0.2));
+#3794 = VECTOR('',#3795,1.);
+#3795 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3796 = ORIENTED_EDGE('',*,*,#2924,.T.);
+#3797 = ORIENTED_EDGE('',*,*,#779,.F.);
+#3798 = ORIENTED_EDGE('',*,*,#3799,.F.);
+#3799 = EDGE_CURVE('',#3776,#771,#3800,.T.);
+#3800 = LINE('',#3801,#3802);
+#3801 = CARTESIAN_POINT('',(2.225,0.125,0.E+000));
+#3802 = VECTOR('',#3803,1.);
+#3803 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3804 = PLANE('',#3805);
+#3805 = AXIS2_PLACEMENT_3D('',#3806,#3807,#3808);
+#3806 = CARTESIAN_POINT('',(2.5,0.125,0.E+000));
+#3807 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#3808 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3809 = ADVANCED_FACE('',(#3810),#3844,.F.);
+#3810 = FACE_BOUND('',#3811,.F.);
+#3811 = EDGE_LOOP('',(#3812,#3822,#3828,#3829,#3830,#3838));
+#3812 = ORIENTED_EDGE('',*,*,#3813,.F.);
+#3813 = EDGE_CURVE('',#3814,#3816,#3818,.T.);
+#3814 = VERTEX_POINT('',#3815);
+#3815 = CARTESIAN_POINT('',(-0.125,-2.225,0.E+000));
+#3816 = VERTEX_POINT('',#3817);
+#3817 = CARTESIAN_POINT('',(-0.125,-2.5,0.E+000));
+#3818 = LINE('',#3819,#3820);
+#3819 = CARTESIAN_POINT('',(-0.125,-2.225,0.E+000));
+#3820 = VECTOR('',#3821,1.);
+#3821 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3822 = ORIENTED_EDGE('',*,*,#3823,.T.);
+#3823 = EDGE_CURVE('',#3814,#524,#3824,.T.);
+#3824 = LINE('',#3825,#3826);
+#3825 = CARTESIAN_POINT('',(-0.125,-2.225,0.E+000));
+#3826 = VECTOR('',#3827,1.);
+#3827 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3828 = ORIENTED_EDGE('',*,*,#523,.F.);
+#3829 = ORIENTED_EDGE('',*,*,#3084,.T.);
+#3830 = ORIENTED_EDGE('',*,*,#3831,.T.);
+#3831 = EDGE_CURVE('',#3085,#3832,#3834,.T.);
+#3832 = VERTEX_POINT('',#3833);
+#3833 = CARTESIAN_POINT('',(-0.125,-2.5,0.2));
+#3834 = LINE('',#3835,#3836);
+#3835 = CARTESIAN_POINT('',(-0.125,-2.225,0.2));
+#3836 = VECTOR('',#3837,1.);
+#3837 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3838 = ORIENTED_EDGE('',*,*,#3839,.F.);
+#3839 = EDGE_CURVE('',#3816,#3832,#3840,.T.);
+#3840 = LINE('',#3841,#3842);
+#3841 = CARTESIAN_POINT('',(-0.125,-2.5,0.E+000));
+#3842 = VECTOR('',#3843,1.);
+#3843 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3844 = PLANE('',#3845);
+#3845 = AXIS2_PLACEMENT_3D('',#3846,#3847,#3848);
+#3846 = CARTESIAN_POINT('',(-0.125,-2.225,0.E+000));
+#3847 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3848 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#3849 = ADVANCED_FACE('',(#3850),#3869,.T.);
+#3850 = FACE_BOUND('',#3851,.F.);
+#3851 = EDGE_LOOP('',(#3852,#3861,#3862,#3863));
+#3852 = ORIENTED_EDGE('',*,*,#3853,.F.);
+#3853 = EDGE_CURVE('',#3776,#3854,#3856,.T.);
+#3854 = VERTEX_POINT('',#3855);
+#3855 = CARTESIAN_POINT('',(2.225,-0.125,0.E+000));
+#3856 = CIRCLE('',#3857,0.125);
+#3857 = AXIS2_PLACEMENT_3D('',#3858,#3859,#3860);
+#3858 = CARTESIAN_POINT('',(2.225,-4.996003610813E-016,0.E+000));
+#3859 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#3860 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3861 = ORIENTED_EDGE('',*,*,#3799,.T.);
+#3862 = ORIENTED_EDGE('',*,*,#770,.F.);
+#3863 = ORIENTED_EDGE('',*,*,#3864,.F.);
+#3864 = EDGE_CURVE('',#3854,#763,#3865,.T.);
+#3865 = LINE('',#3866,#3867);
+#3866 = CARTESIAN_POINT('',(2.225,-0.125,0.E+000));
+#3867 = VECTOR('',#3868,1.);
+#3868 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3869 = CYLINDRICAL_SURFACE('',#3870,0.125);
+#3870 = AXIS2_PLACEMENT_3D('',#3871,#3872,#3873);
+#3871 = CARTESIAN_POINT('',(2.225,-4.996003610813E-016,0.E+000));
+#3872 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#3873 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3874 = ADVANCED_FACE('',(#3875),#3894,.T.);
+#3875 = FACE_BOUND('',#3876,.F.);
+#3876 = EDGE_LOOP('',(#3877,#3886,#3892,#3893));
+#3877 = ORIENTED_EDGE('',*,*,#3878,.F.);
+#3878 = EDGE_CURVE('',#3879,#3814,#3881,.T.);
+#3879 = VERTEX_POINT('',#3880);
+#3880 = CARTESIAN_POINT('',(0.125,-2.225,0.E+000));
+#3881 = CIRCLE('',#3882,0.125);
+#3882 = AXIS2_PLACEMENT_3D('',#3883,#3884,#3885);
+#3883 = CARTESIAN_POINT('',(-9.71445146547E-016,-2.225,0.E+000));
+#3884 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#3885 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3886 = ORIENTED_EDGE('',*,*,#3887,.T.);
+#3887 = EDGE_CURVE('',#3879,#532,#3888,.T.);
+#3888 = LINE('',#3889,#3890);
+#3889 = CARTESIAN_POINT('',(0.125,-2.225,0.E+000));
+#3890 = VECTOR('',#3891,1.);
+#3891 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3892 = ORIENTED_EDGE('',*,*,#531,.F.);
+#3893 = ORIENTED_EDGE('',*,*,#3823,.F.);
+#3894 = CYLINDRICAL_SURFACE('',#3895,0.125);
+#3895 = AXIS2_PLACEMENT_3D('',#3896,#3897,#3898);
+#3896 = CARTESIAN_POINT('',(-9.71445146547E-016,-2.225,0.E+000));
+#3897 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#3898 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#3899 = ADVANCED_FACE('',(#3900),#3927,.F.);
+#3900 = FACE_BOUND('',#3901,.F.);
+#3901 = EDGE_LOOP('',(#3902,#3910,#3911,#3912,#3913,#3921));
+#3902 = ORIENTED_EDGE('',*,*,#3903,.F.);
+#3903 = EDGE_CURVE('',#3854,#3904,#3906,.T.);
+#3904 = VERTEX_POINT('',#3905);
+#3905 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000));
+#3906 = LINE('',#3907,#3908);
+#3907 = CARTESIAN_POINT('',(2.225,-0.125,0.E+000));
+#3908 = VECTOR('',#3909,1.);
+#3909 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3910 = ORIENTED_EDGE('',*,*,#3864,.T.);
+#3911 = ORIENTED_EDGE('',*,*,#762,.F.);
+#3912 = ORIENTED_EDGE('',*,*,#2908,.T.);
+#3913 = ORIENTED_EDGE('',*,*,#3914,.T.);
+#3914 = EDGE_CURVE('',#2909,#3915,#3917,.T.);
+#3915 = VERTEX_POINT('',#3916);
+#3916 = CARTESIAN_POINT('',(2.5,-0.125,0.2));
+#3917 = LINE('',#3918,#3919);
+#3918 = CARTESIAN_POINT('',(2.225,-0.125,0.2));
+#3919 = VECTOR('',#3920,1.);
+#3920 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3921 = ORIENTED_EDGE('',*,*,#3922,.F.);
+#3922 = EDGE_CURVE('',#3904,#3915,#3923,.T.);
+#3923 = LINE('',#3924,#3925);
+#3924 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000));
+#3925 = VECTOR('',#3926,1.);
+#3926 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3927 = PLANE('',#3928);
+#3928 = AXIS2_PLACEMENT_3D('',#3929,#3930,#3931);
+#3929 = CARTESIAN_POINT('',(2.225,-0.125,0.E+000));
+#3930 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#3931 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#3932 = ADVANCED_FACE('',(#3933),#3960,.F.);
+#3933 = FACE_BOUND('',#3934,.F.);
+#3934 = EDGE_LOOP('',(#3935,#3943,#3951,#3957,#3958,#3959));
+#3935 = ORIENTED_EDGE('',*,*,#3936,.F.);
+#3936 = EDGE_CURVE('',#3937,#3879,#3939,.T.);
+#3937 = VERTEX_POINT('',#3938);
+#3938 = CARTESIAN_POINT('',(0.125,-2.5,0.E+000));
+#3939 = LINE('',#3940,#3941);
+#3940 = CARTESIAN_POINT('',(0.125,-2.5,0.E+000));
+#3941 = VECTOR('',#3942,1.);
+#3942 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3943 = ORIENTED_EDGE('',*,*,#3944,.T.);
+#3944 = EDGE_CURVE('',#3937,#3945,#3947,.T.);
+#3945 = VERTEX_POINT('',#3946);
+#3946 = CARTESIAN_POINT('',(0.125,-2.5,0.2));
+#3947 = LINE('',#3948,#3949);
+#3948 = CARTESIAN_POINT('',(0.125,-2.5,0.E+000));
+#3949 = VECTOR('',#3950,1.);
+#3950 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3951 = ORIENTED_EDGE('',*,*,#3952,.T.);
+#3952 = EDGE_CURVE('',#3945,#3093,#3953,.T.);
+#3953 = LINE('',#3954,#3955);
+#3954 = CARTESIAN_POINT('',(0.125,-2.5,0.2));
+#3955 = VECTOR('',#3956,1.);
+#3956 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3957 = ORIENTED_EDGE('',*,*,#3100,.T.);
+#3958 = ORIENTED_EDGE('',*,*,#540,.F.);
+#3959 = ORIENTED_EDGE('',*,*,#3887,.F.);
+#3960 = PLANE('',#3961);
+#3961 = AXIS2_PLACEMENT_3D('',#3962,#3963,#3964);
+#3962 = CARTESIAN_POINT('',(0.125,-2.5,0.E+000));
+#3963 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#3964 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#3965 = ADVANCED_FACE('',(#3966),#4000,.F.);
+#3966 = FACE_BOUND('',#3967,.F.);
+#3967 = EDGE_LOOP('',(#3968,#3978,#3986,#3992,#3993,#3994));
+#3968 = ORIENTED_EDGE('',*,*,#3969,.F.);
+#3969 = EDGE_CURVE('',#3970,#3972,#3974,.T.);
+#3970 = VERTEX_POINT('',#3971);
+#3971 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000));
+#3972 = VERTEX_POINT('',#3973);
+#3973 = CARTESIAN_POINT('',(2.225,-0.375,0.E+000));
+#3974 = LINE('',#3975,#3976);
+#3975 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000));
+#3976 = VECTOR('',#3977,1.);
+#3977 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3978 = ORIENTED_EDGE('',*,*,#3979,.T.);
+#3979 = EDGE_CURVE('',#3970,#3980,#3982,.T.);
+#3980 = VERTEX_POINT('',#3981);
+#3981 = CARTESIAN_POINT('',(2.5,-0.375,0.2));
+#3982 = LINE('',#3983,#3984);
+#3983 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000));
+#3984 = VECTOR('',#3985,1.);
+#3985 = DIRECTION('',(0.E+000,0.E+000,1.));
+#3986 = ORIENTED_EDGE('',*,*,#3987,.T.);
+#3987 = EDGE_CURVE('',#3980,#2894,#3988,.T.);
+#3988 = LINE('',#3989,#3990);
+#3989 = CARTESIAN_POINT('',(2.5,-0.375,0.2));
+#3990 = VECTOR('',#3991,1.);
+#3991 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#3992 = ORIENTED_EDGE('',*,*,#2901,.T.);
+#3993 = ORIENTED_EDGE('',*,*,#746,.F.);
+#3994 = ORIENTED_EDGE('',*,*,#3995,.F.);
+#3995 = EDGE_CURVE('',#3972,#738,#3996,.T.);
+#3996 = LINE('',#3997,#3998);
+#3997 = CARTESIAN_POINT('',(2.225,-0.375,0.E+000));
+#3998 = VECTOR('',#3999,1.);
+#3999 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4000 = PLANE('',#4001);
+#4001 = AXIS2_PLACEMENT_3D('',#4002,#4003,#4004);
+#4002 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000));
+#4003 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#4004 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4005 = ADVANCED_FACE('',(#4006),#4040,.F.);
+#4006 = FACE_BOUND('',#4007,.F.);
+#4007 = EDGE_LOOP('',(#4008,#4018,#4024,#4025,#4026,#4034));
+#4008 = ORIENTED_EDGE('',*,*,#4009,.F.);
+#4009 = EDGE_CURVE('',#4010,#4012,#4014,.T.);
+#4010 = VERTEX_POINT('',#4011);
+#4011 = CARTESIAN_POINT('',(0.375,-2.225,0.E+000));
+#4012 = VERTEX_POINT('',#4013);
+#4013 = CARTESIAN_POINT('',(0.375,-2.5,0.E+000));
+#4014 = LINE('',#4015,#4016);
+#4015 = CARTESIAN_POINT('',(0.375,-2.225,0.E+000));
+#4016 = VECTOR('',#4017,1.);
+#4017 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4018 = ORIENTED_EDGE('',*,*,#4019,.T.);
+#4019 = EDGE_CURVE('',#4010,#557,#4020,.T.);
+#4020 = LINE('',#4021,#4022);
+#4021 = CARTESIAN_POINT('',(0.375,-2.225,0.E+000));
+#4022 = VECTOR('',#4023,1.);
+#4023 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4024 = ORIENTED_EDGE('',*,*,#556,.F.);
+#4025 = ORIENTED_EDGE('',*,*,#3107,.T.);
+#4026 = ORIENTED_EDGE('',*,*,#4027,.T.);
+#4027 = EDGE_CURVE('',#3108,#4028,#4030,.T.);
+#4028 = VERTEX_POINT('',#4029);
+#4029 = CARTESIAN_POINT('',(0.375,-2.5,0.2));
+#4030 = LINE('',#4031,#4032);
+#4031 = CARTESIAN_POINT('',(0.375,-2.225,0.2));
+#4032 = VECTOR('',#4033,1.);
+#4033 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4034 = ORIENTED_EDGE('',*,*,#4035,.F.);
+#4035 = EDGE_CURVE('',#4012,#4028,#4036,.T.);
+#4036 = LINE('',#4037,#4038);
+#4037 = CARTESIAN_POINT('',(0.375,-2.5,0.E+000));
+#4038 = VECTOR('',#4039,1.);
+#4039 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4040 = PLANE('',#4041);
+#4041 = AXIS2_PLACEMENT_3D('',#4042,#4043,#4044);
+#4042 = CARTESIAN_POINT('',(0.375,-2.225,0.E+000));
+#4043 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4044 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4045 = ADVANCED_FACE('',(#4046),#4065,.T.);
+#4046 = FACE_BOUND('',#4047,.F.);
+#4047 = EDGE_LOOP('',(#4048,#4057,#4058,#4059));
+#4048 = ORIENTED_EDGE('',*,*,#4049,.F.);
+#4049 = EDGE_CURVE('',#3972,#4050,#4052,.T.);
+#4050 = VERTEX_POINT('',#4051);
+#4051 = CARTESIAN_POINT('',(2.225,-0.625,0.E+000));
+#4052 = CIRCLE('',#4053,0.125);
+#4053 = AXIS2_PLACEMENT_3D('',#4054,#4055,#4056);
+#4054 = CARTESIAN_POINT('',(2.225,-0.5,0.E+000));
+#4055 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#4056 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4057 = ORIENTED_EDGE('',*,*,#3995,.T.);
+#4058 = ORIENTED_EDGE('',*,*,#737,.F.);
+#4059 = ORIENTED_EDGE('',*,*,#4060,.F.);
+#4060 = EDGE_CURVE('',#4050,#730,#4061,.T.);
+#4061 = LINE('',#4062,#4063);
+#4062 = CARTESIAN_POINT('',(2.225,-0.625,0.E+000));
+#4063 = VECTOR('',#4064,1.);
+#4064 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4065 = CYLINDRICAL_SURFACE('',#4066,0.125);
+#4066 = AXIS2_PLACEMENT_3D('',#4067,#4068,#4069);
+#4067 = CARTESIAN_POINT('',(2.225,-0.5,0.E+000));
+#4068 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4069 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4070 = ADVANCED_FACE('',(#4071),#4090,.T.);
+#4071 = FACE_BOUND('',#4072,.F.);
+#4072 = EDGE_LOOP('',(#4073,#4082,#4088,#4089));
+#4073 = ORIENTED_EDGE('',*,*,#4074,.F.);
+#4074 = EDGE_CURVE('',#4075,#4010,#4077,.T.);
+#4075 = VERTEX_POINT('',#4076);
+#4076 = CARTESIAN_POINT('',(0.625,-2.225,0.E+000));
+#4077 = CIRCLE('',#4078,0.125);
+#4078 = AXIS2_PLACEMENT_3D('',#4079,#4080,#4081);
+#4079 = CARTESIAN_POINT('',(0.5,-2.225,0.E+000));
+#4080 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#4081 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4082 = ORIENTED_EDGE('',*,*,#4083,.T.);
+#4083 = EDGE_CURVE('',#4075,#565,#4084,.T.);
+#4084 = LINE('',#4085,#4086);
+#4085 = CARTESIAN_POINT('',(0.625,-2.225,0.E+000));
+#4086 = VECTOR('',#4087,1.);
+#4087 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4088 = ORIENTED_EDGE('',*,*,#564,.F.);
+#4089 = ORIENTED_EDGE('',*,*,#4019,.F.);
+#4090 = CYLINDRICAL_SURFACE('',#4091,0.125);
+#4091 = AXIS2_PLACEMENT_3D('',#4092,#4093,#4094);
+#4092 = CARTESIAN_POINT('',(0.5,-2.225,0.E+000));
+#4093 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4094 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4095 = ADVANCED_FACE('',(#4096),#4123,.F.);
+#4096 = FACE_BOUND('',#4097,.F.);
+#4097 = EDGE_LOOP('',(#4098,#4106,#4107,#4108,#4109,#4117));
+#4098 = ORIENTED_EDGE('',*,*,#4099,.F.);
+#4099 = EDGE_CURVE('',#4050,#4100,#4102,.T.);
+#4100 = VERTEX_POINT('',#4101);
+#4101 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000));
+#4102 = LINE('',#4103,#4104);
+#4103 = CARTESIAN_POINT('',(2.225,-0.625,0.E+000));
+#4104 = VECTOR('',#4105,1.);
+#4105 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4106 = ORIENTED_EDGE('',*,*,#4060,.T.);
+#4107 = ORIENTED_EDGE('',*,*,#729,.F.);
+#4108 = ORIENTED_EDGE('',*,*,#2885,.T.);
+#4109 = ORIENTED_EDGE('',*,*,#4110,.T.);
+#4110 = EDGE_CURVE('',#2886,#4111,#4113,.T.);
+#4111 = VERTEX_POINT('',#4112);
+#4112 = CARTESIAN_POINT('',(2.5,-0.625,0.2));
+#4113 = LINE('',#4114,#4115);
+#4114 = CARTESIAN_POINT('',(2.225,-0.625,0.2));
+#4115 = VECTOR('',#4116,1.);
+#4116 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4117 = ORIENTED_EDGE('',*,*,#4118,.F.);
+#4118 = EDGE_CURVE('',#4100,#4111,#4119,.T.);
+#4119 = LINE('',#4120,#4121);
+#4120 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000));
+#4121 = VECTOR('',#4122,1.);
+#4122 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4123 = PLANE('',#4124);
+#4124 = AXIS2_PLACEMENT_3D('',#4125,#4126,#4127);
+#4125 = CARTESIAN_POINT('',(2.225,-0.625,0.E+000));
+#4126 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4127 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4128 = ADVANCED_FACE('',(#4129),#4156,.F.);
+#4129 = FACE_BOUND('',#4130,.F.);
+#4130 = EDGE_LOOP('',(#4131,#4139,#4147,#4153,#4154,#4155));
+#4131 = ORIENTED_EDGE('',*,*,#4132,.F.);
+#4132 = EDGE_CURVE('',#4133,#4075,#4135,.T.);
+#4133 = VERTEX_POINT('',#4134);
+#4134 = CARTESIAN_POINT('',(0.625,-2.5,0.E+000));
+#4135 = LINE('',#4136,#4137);
+#4136 = CARTESIAN_POINT('',(0.625,-2.5,0.E+000));
+#4137 = VECTOR('',#4138,1.);
+#4138 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4139 = ORIENTED_EDGE('',*,*,#4140,.T.);
+#4140 = EDGE_CURVE('',#4133,#4141,#4143,.T.);
+#4141 = VERTEX_POINT('',#4142);
+#4142 = CARTESIAN_POINT('',(0.625,-2.5,0.2));
+#4143 = LINE('',#4144,#4145);
+#4144 = CARTESIAN_POINT('',(0.625,-2.5,0.E+000));
+#4145 = VECTOR('',#4146,1.);
+#4146 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4147 = ORIENTED_EDGE('',*,*,#4148,.T.);
+#4148 = EDGE_CURVE('',#4141,#3116,#4149,.T.);
+#4149 = LINE('',#4150,#4151);
+#4150 = CARTESIAN_POINT('',(0.625,-2.5,0.2));
+#4151 = VECTOR('',#4152,1.);
+#4152 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4153 = ORIENTED_EDGE('',*,*,#3123,.T.);
+#4154 = ORIENTED_EDGE('',*,*,#573,.F.);
+#4155 = ORIENTED_EDGE('',*,*,#4083,.F.);
+#4156 = PLANE('',#4157);
+#4157 = AXIS2_PLACEMENT_3D('',#4158,#4159,#4160);
+#4158 = CARTESIAN_POINT('',(0.625,-2.5,0.E+000));
+#4159 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#4160 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4161 = ADVANCED_FACE('',(#4162),#4196,.F.);
+#4162 = FACE_BOUND('',#4163,.F.);
+#4163 = EDGE_LOOP('',(#4164,#4174,#4182,#4188,#4189,#4190));
+#4164 = ORIENTED_EDGE('',*,*,#4165,.F.);
+#4165 = EDGE_CURVE('',#4166,#4168,#4170,.T.);
+#4166 = VERTEX_POINT('',#4167);
+#4167 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000));
+#4168 = VERTEX_POINT('',#4169);
+#4169 = CARTESIAN_POINT('',(2.225,-0.875,0.E+000));
+#4170 = LINE('',#4171,#4172);
+#4171 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000));
+#4172 = VECTOR('',#4173,1.);
+#4173 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4174 = ORIENTED_EDGE('',*,*,#4175,.T.);
+#4175 = EDGE_CURVE('',#4166,#4176,#4178,.T.);
+#4176 = VERTEX_POINT('',#4177);
+#4177 = CARTESIAN_POINT('',(2.5,-0.875,0.2));
+#4178 = LINE('',#4179,#4180);
+#4179 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000));
+#4180 = VECTOR('',#4181,1.);
+#4181 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4182 = ORIENTED_EDGE('',*,*,#4183,.T.);
+#4183 = EDGE_CURVE('',#4176,#2871,#4184,.T.);
+#4184 = LINE('',#4185,#4186);
+#4185 = CARTESIAN_POINT('',(2.5,-0.875,0.2));
+#4186 = VECTOR('',#4187,1.);
+#4187 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4188 = ORIENTED_EDGE('',*,*,#2878,.T.);
+#4189 = ORIENTED_EDGE('',*,*,#713,.F.);
+#4190 = ORIENTED_EDGE('',*,*,#4191,.F.);
+#4191 = EDGE_CURVE('',#4168,#705,#4192,.T.);
+#4192 = LINE('',#4193,#4194);
+#4193 = CARTESIAN_POINT('',(2.225,-0.875,0.E+000));
+#4194 = VECTOR('',#4195,1.);
+#4195 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4196 = PLANE('',#4197);
+#4197 = AXIS2_PLACEMENT_3D('',#4198,#4199,#4200);
+#4198 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000));
+#4199 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#4200 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4201 = ADVANCED_FACE('',(#4202),#4236,.F.);
+#4202 = FACE_BOUND('',#4203,.F.);
+#4203 = EDGE_LOOP('',(#4204,#4214,#4220,#4221,#4222,#4230));
+#4204 = ORIENTED_EDGE('',*,*,#4205,.F.);
+#4205 = EDGE_CURVE('',#4206,#4208,#4210,.T.);
+#4206 = VERTEX_POINT('',#4207);
+#4207 = CARTESIAN_POINT('',(0.875,-2.225,0.E+000));
+#4208 = VERTEX_POINT('',#4209);
+#4209 = CARTESIAN_POINT('',(0.875,-2.5,0.E+000));
+#4210 = LINE('',#4211,#4212);
+#4211 = CARTESIAN_POINT('',(0.875,-2.225,0.E+000));
+#4212 = VECTOR('',#4213,1.);
+#4213 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4214 = ORIENTED_EDGE('',*,*,#4215,.T.);
+#4215 = EDGE_CURVE('',#4206,#590,#4216,.T.);
+#4216 = LINE('',#4217,#4218);
+#4217 = CARTESIAN_POINT('',(0.875,-2.225,0.E+000));
+#4218 = VECTOR('',#4219,1.);
+#4219 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4220 = ORIENTED_EDGE('',*,*,#589,.F.);
+#4221 = ORIENTED_EDGE('',*,*,#3130,.T.);
+#4222 = ORIENTED_EDGE('',*,*,#4223,.T.);
+#4223 = EDGE_CURVE('',#3131,#4224,#4226,.T.);
+#4224 = VERTEX_POINT('',#4225);
+#4225 = CARTESIAN_POINT('',(0.875,-2.5,0.2));
+#4226 = LINE('',#4227,#4228);
+#4227 = CARTESIAN_POINT('',(0.875,-2.225,0.2));
+#4228 = VECTOR('',#4229,1.);
+#4229 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4230 = ORIENTED_EDGE('',*,*,#4231,.F.);
+#4231 = EDGE_CURVE('',#4208,#4224,#4232,.T.);
+#4232 = LINE('',#4233,#4234);
+#4233 = CARTESIAN_POINT('',(0.875,-2.5,0.E+000));
+#4234 = VECTOR('',#4235,1.);
+#4235 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4236 = PLANE('',#4237);
+#4237 = AXIS2_PLACEMENT_3D('',#4238,#4239,#4240);
+#4238 = CARTESIAN_POINT('',(0.875,-2.225,0.E+000));
+#4239 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4240 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4241 = ADVANCED_FACE('',(#4242),#4261,.T.);
+#4242 = FACE_BOUND('',#4243,.F.);
+#4243 = EDGE_LOOP('',(#4244,#4253,#4254,#4255));
+#4244 = ORIENTED_EDGE('',*,*,#4245,.F.);
+#4245 = EDGE_CURVE('',#4168,#4246,#4248,.T.);
+#4246 = VERTEX_POINT('',#4247);
+#4247 = CARTESIAN_POINT('',(2.225,-1.125,0.E+000));
+#4248 = CIRCLE('',#4249,0.125);
+#4249 = AXIS2_PLACEMENT_3D('',#4250,#4251,#4252);
+#4250 = CARTESIAN_POINT('',(2.225,-1.,0.E+000));
+#4251 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#4252 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4253 = ORIENTED_EDGE('',*,*,#4191,.T.);
+#4254 = ORIENTED_EDGE('',*,*,#704,.F.);
+#4255 = ORIENTED_EDGE('',*,*,#4256,.F.);
+#4256 = EDGE_CURVE('',#4246,#697,#4257,.T.);
+#4257 = LINE('',#4258,#4259);
+#4258 = CARTESIAN_POINT('',(2.225,-1.125,0.E+000));
+#4259 = VECTOR('',#4260,1.);
+#4260 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4261 = CYLINDRICAL_SURFACE('',#4262,0.125);
+#4262 = AXIS2_PLACEMENT_3D('',#4263,#4264,#4265);
+#4263 = CARTESIAN_POINT('',(2.225,-1.,0.E+000));
+#4264 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4265 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4266 = ADVANCED_FACE('',(#4267),#4286,.T.);
+#4267 = FACE_BOUND('',#4268,.F.);
+#4268 = EDGE_LOOP('',(#4269,#4278,#4284,#4285));
+#4269 = ORIENTED_EDGE('',*,*,#4270,.F.);
+#4270 = EDGE_CURVE('',#4271,#4206,#4273,.T.);
+#4271 = VERTEX_POINT('',#4272);
+#4272 = CARTESIAN_POINT('',(1.125,-2.225,0.E+000));
+#4273 = CIRCLE('',#4274,0.125);
+#4274 = AXIS2_PLACEMENT_3D('',#4275,#4276,#4277);
+#4275 = CARTESIAN_POINT('',(1.,-2.225,0.E+000));
+#4276 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#4277 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4278 = ORIENTED_EDGE('',*,*,#4279,.T.);
+#4279 = EDGE_CURVE('',#4271,#598,#4280,.T.);
+#4280 = LINE('',#4281,#4282);
+#4281 = CARTESIAN_POINT('',(1.125,-2.225,0.E+000));
+#4282 = VECTOR('',#4283,1.);
+#4283 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4284 = ORIENTED_EDGE('',*,*,#597,.F.);
+#4285 = ORIENTED_EDGE('',*,*,#4215,.F.);
+#4286 = CYLINDRICAL_SURFACE('',#4287,0.125);
+#4287 = AXIS2_PLACEMENT_3D('',#4288,#4289,#4290);
+#4288 = CARTESIAN_POINT('',(1.,-2.225,0.E+000));
+#4289 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4290 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4291 = ADVANCED_FACE('',(#4292),#4319,.F.);
+#4292 = FACE_BOUND('',#4293,.F.);
+#4293 = EDGE_LOOP('',(#4294,#4302,#4303,#4304,#4305,#4313));
+#4294 = ORIENTED_EDGE('',*,*,#4295,.F.);
+#4295 = EDGE_CURVE('',#4246,#4296,#4298,.T.);
+#4296 = VERTEX_POINT('',#4297);
+#4297 = CARTESIAN_POINT('',(2.5,-1.125,0.E+000));
+#4298 = LINE('',#4299,#4300);
+#4299 = CARTESIAN_POINT('',(2.225,-1.125,0.E+000));
+#4300 = VECTOR('',#4301,1.);
+#4301 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4302 = ORIENTED_EDGE('',*,*,#4256,.T.);
+#4303 = ORIENTED_EDGE('',*,*,#696,.F.);
+#4304 = ORIENTED_EDGE('',*,*,#2862,.T.);
+#4305 = ORIENTED_EDGE('',*,*,#4306,.T.);
+#4306 = EDGE_CURVE('',#2863,#4307,#4309,.T.);
+#4307 = VERTEX_POINT('',#4308);
+#4308 = CARTESIAN_POINT('',(2.5,-1.125,0.2));
+#4309 = LINE('',#4310,#4311);
+#4310 = CARTESIAN_POINT('',(2.225,-1.125,0.2));
+#4311 = VECTOR('',#4312,1.);
+#4312 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4313 = ORIENTED_EDGE('',*,*,#4314,.F.);
+#4314 = EDGE_CURVE('',#4296,#4307,#4315,.T.);
+#4315 = LINE('',#4316,#4317);
+#4316 = CARTESIAN_POINT('',(2.5,-1.125,0.E+000));
+#4317 = VECTOR('',#4318,1.);
+#4318 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4319 = PLANE('',#4320);
+#4320 = AXIS2_PLACEMENT_3D('',#4321,#4322,#4323);
+#4321 = CARTESIAN_POINT('',(2.225,-1.125,0.E+000));
+#4322 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4323 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4324 = ADVANCED_FACE('',(#4325),#4352,.F.);
+#4325 = FACE_BOUND('',#4326,.F.);
+#4326 = EDGE_LOOP('',(#4327,#4335,#4343,#4349,#4350,#4351));
+#4327 = ORIENTED_EDGE('',*,*,#4328,.F.);
+#4328 = EDGE_CURVE('',#4329,#4271,#4331,.T.);
+#4329 = VERTEX_POINT('',#4330);
+#4330 = CARTESIAN_POINT('',(1.125,-2.5,0.E+000));
+#4331 = LINE('',#4332,#4333);
+#4332 = CARTESIAN_POINT('',(1.125,-2.5,0.E+000));
+#4333 = VECTOR('',#4334,1.);
+#4334 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4335 = ORIENTED_EDGE('',*,*,#4336,.T.);
+#4336 = EDGE_CURVE('',#4329,#4337,#4339,.T.);
+#4337 = VERTEX_POINT('',#4338);
+#4338 = CARTESIAN_POINT('',(1.125,-2.5,0.2));
+#4339 = LINE('',#4340,#4341);
+#4340 = CARTESIAN_POINT('',(1.125,-2.5,0.E+000));
+#4341 = VECTOR('',#4342,1.);
+#4342 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4343 = ORIENTED_EDGE('',*,*,#4344,.T.);
+#4344 = EDGE_CURVE('',#4337,#3139,#4345,.T.);
+#4345 = LINE('',#4346,#4347);
+#4346 = CARTESIAN_POINT('',(1.125,-2.5,0.2));
+#4347 = VECTOR('',#4348,1.);
+#4348 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4349 = ORIENTED_EDGE('',*,*,#3146,.T.);
+#4350 = ORIENTED_EDGE('',*,*,#606,.F.);
+#4351 = ORIENTED_EDGE('',*,*,#4279,.F.);
+#4352 = PLANE('',#4353);
+#4353 = AXIS2_PLACEMENT_3D('',#4354,#4355,#4356);
+#4354 = CARTESIAN_POINT('',(1.125,-2.5,0.E+000));
+#4355 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#4356 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4357 = ADVANCED_FACE('',(#4358),#4392,.F.);
+#4358 = FACE_BOUND('',#4359,.F.);
+#4359 = EDGE_LOOP('',(#4360,#4370,#4378,#4384,#4385,#4386));
+#4360 = ORIENTED_EDGE('',*,*,#4361,.F.);
+#4361 = EDGE_CURVE('',#4362,#4364,#4366,.T.);
+#4362 = VERTEX_POINT('',#4363);
+#4363 = CARTESIAN_POINT('',(2.5,-1.375,0.E+000));
+#4364 = VERTEX_POINT('',#4365);
+#4365 = CARTESIAN_POINT('',(2.225,-1.375,0.E+000));
+#4366 = LINE('',#4367,#4368);
+#4367 = CARTESIAN_POINT('',(2.5,-1.375,0.E+000));
+#4368 = VECTOR('',#4369,1.);
+#4369 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4370 = ORIENTED_EDGE('',*,*,#4371,.T.);
+#4371 = EDGE_CURVE('',#4362,#4372,#4374,.T.);
+#4372 = VERTEX_POINT('',#4373);
+#4373 = CARTESIAN_POINT('',(2.5,-1.375,0.2));
+#4374 = LINE('',#4375,#4376);
+#4375 = CARTESIAN_POINT('',(2.5,-1.375,0.E+000));
+#4376 = VECTOR('',#4377,1.);
+#4377 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4378 = ORIENTED_EDGE('',*,*,#4379,.T.);
+#4379 = EDGE_CURVE('',#4372,#2848,#4380,.T.);
+#4380 = LINE('',#4381,#4382);
+#4381 = CARTESIAN_POINT('',(2.5,-1.375,0.2));
+#4382 = VECTOR('',#4383,1.);
+#4383 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4384 = ORIENTED_EDGE('',*,*,#2855,.T.);
+#4385 = ORIENTED_EDGE('',*,*,#680,.F.);
+#4386 = ORIENTED_EDGE('',*,*,#4387,.F.);
+#4387 = EDGE_CURVE('',#4364,#672,#4388,.T.);
+#4388 = LINE('',#4389,#4390);
+#4389 = CARTESIAN_POINT('',(2.225,-1.375,0.E+000));
+#4390 = VECTOR('',#4391,1.);
+#4391 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4392 = PLANE('',#4393);
+#4393 = AXIS2_PLACEMENT_3D('',#4394,#4395,#4396);
+#4394 = CARTESIAN_POINT('',(2.5,-1.375,0.E+000));
+#4395 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#4396 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#4397 = ADVANCED_FACE('',(#4398),#4432,.F.);
+#4398 = FACE_BOUND('',#4399,.F.);
+#4399 = EDGE_LOOP('',(#4400,#4410,#4416,#4417,#4418,#4426));
+#4400 = ORIENTED_EDGE('',*,*,#4401,.F.);
+#4401 = EDGE_CURVE('',#4402,#4404,#4406,.T.);
+#4402 = VERTEX_POINT('',#4403);
+#4403 = CARTESIAN_POINT('',(1.375,-2.225,0.E+000));
+#4404 = VERTEX_POINT('',#4405);
+#4405 = CARTESIAN_POINT('',(1.375,-2.5,0.E+000));
+#4406 = LINE('',#4407,#4408);
+#4407 = CARTESIAN_POINT('',(1.375,-2.225,0.E+000));
+#4408 = VECTOR('',#4409,1.);
+#4409 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4410 = ORIENTED_EDGE('',*,*,#4411,.T.);
+#4411 = EDGE_CURVE('',#4402,#623,#4412,.T.);
+#4412 = LINE('',#4413,#4414);
+#4413 = CARTESIAN_POINT('',(1.375,-2.225,0.E+000));
+#4414 = VECTOR('',#4415,1.);
+#4415 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4416 = ORIENTED_EDGE('',*,*,#622,.F.);
+#4417 = ORIENTED_EDGE('',*,*,#3153,.T.);
+#4418 = ORIENTED_EDGE('',*,*,#4419,.T.);
+#4419 = EDGE_CURVE('',#3154,#4420,#4422,.T.);
+#4420 = VERTEX_POINT('',#4421);
+#4421 = CARTESIAN_POINT('',(1.375,-2.5,0.2));
+#4422 = LINE('',#4423,#4424);
+#4423 = CARTESIAN_POINT('',(1.375,-2.225,0.2));
+#4424 = VECTOR('',#4425,1.);
+#4425 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4426 = ORIENTED_EDGE('',*,*,#4427,.F.);
+#4427 = EDGE_CURVE('',#4404,#4420,#4428,.T.);
+#4428 = LINE('',#4429,#4430);
+#4429 = CARTESIAN_POINT('',(1.375,-2.5,0.E+000));
+#4430 = VECTOR('',#4431,1.);
+#4431 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4432 = PLANE('',#4433);
+#4433 = AXIS2_PLACEMENT_3D('',#4434,#4435,#4436);
+#4434 = CARTESIAN_POINT('',(1.375,-2.225,0.E+000));
+#4435 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4436 = DIRECTION('',(-5.665538897648E-016,-1.,0.E+000));
+#4437 = ADVANCED_FACE('',(#4438),#4457,.T.);
+#4438 = FACE_BOUND('',#4439,.F.);
+#4439 = EDGE_LOOP('',(#4440,#4449,#4450,#4451));
+#4440 = ORIENTED_EDGE('',*,*,#4441,.F.);
+#4441 = EDGE_CURVE('',#4364,#4442,#4444,.T.);
+#4442 = VERTEX_POINT('',#4443);
+#4443 = CARTESIAN_POINT('',(2.225,-1.625,0.E+000));
+#4444 = CIRCLE('',#4445,0.125);
+#4445 = AXIS2_PLACEMENT_3D('',#4446,#4447,#4448);
+#4446 = CARTESIAN_POINT('',(2.225,-1.5,0.E+000));
+#4447 = DIRECTION('',(0.E+000,-0.E+000,1.));
+#4448 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4449 = ORIENTED_EDGE('',*,*,#4387,.T.);
+#4450 = ORIENTED_EDGE('',*,*,#671,.F.);
+#4451 = ORIENTED_EDGE('',*,*,#4452,.F.);
+#4452 = EDGE_CURVE('',#4442,#664,#4453,.T.);
+#4453 = LINE('',#4454,#4455);
+#4454 = CARTESIAN_POINT('',(2.225,-1.625,0.E+000));
+#4455 = VECTOR('',#4456,1.);
+#4456 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4457 = CYLINDRICAL_SURFACE('',#4458,0.125);
+#4458 = AXIS2_PLACEMENT_3D('',#4459,#4460,#4461);
+#4459 = CARTESIAN_POINT('',(2.225,-1.5,0.E+000));
+#4460 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4461 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4462 = ADVANCED_FACE('',(#4463),#4482,.T.);
+#4463 = FACE_BOUND('',#4464,.F.);
+#4464 = EDGE_LOOP('',(#4465,#4474,#4480,#4481));
+#4465 = ORIENTED_EDGE('',*,*,#4466,.F.);
+#4466 = EDGE_CURVE('',#4467,#4402,#4469,.T.);
+#4467 = VERTEX_POINT('',#4468);
+#4468 = CARTESIAN_POINT('',(1.625,-2.225,0.E+000));
+#4469 = CIRCLE('',#4470,0.125);
+#4470 = AXIS2_PLACEMENT_3D('',#4471,#4472,#4473);
+#4471 = CARTESIAN_POINT('',(1.5,-2.225,0.E+000));
+#4472 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#4473 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4474 = ORIENTED_EDGE('',*,*,#4475,.T.);
+#4475 = EDGE_CURVE('',#4467,#631,#4476,.T.);
+#4476 = LINE('',#4477,#4478);
+#4477 = CARTESIAN_POINT('',(1.625,-2.225,0.E+000));
+#4478 = VECTOR('',#4479,1.);
+#4479 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4480 = ORIENTED_EDGE('',*,*,#630,.F.);
+#4481 = ORIENTED_EDGE('',*,*,#4411,.F.);
+#4482 = CYLINDRICAL_SURFACE('',#4483,0.125);
+#4483 = AXIS2_PLACEMENT_3D('',#4484,#4485,#4486);
+#4484 = CARTESIAN_POINT('',(1.5,-2.225,0.E+000));
+#4485 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4486 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#4487 = ADVANCED_FACE('',(#4488),#4515,.F.);
+#4488 = FACE_BOUND('',#4489,.F.);
+#4489 = EDGE_LOOP('',(#4490,#4498,#4499,#4500,#4501,#4509));
+#4490 = ORIENTED_EDGE('',*,*,#4491,.F.);
+#4491 = EDGE_CURVE('',#4442,#4492,#4494,.T.);
+#4492 = VERTEX_POINT('',#4493);
+#4493 = CARTESIAN_POINT('',(2.5,-1.625,0.E+000));
+#4494 = LINE('',#4495,#4496);
+#4495 = CARTESIAN_POINT('',(2.225,-1.625,0.E+000));
+#4496 = VECTOR('',#4497,1.);
+#4497 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4498 = ORIENTED_EDGE('',*,*,#4452,.T.);
+#4499 = ORIENTED_EDGE('',*,*,#663,.F.);
+#4500 = ORIENTED_EDGE('',*,*,#2839,.T.);
+#4501 = ORIENTED_EDGE('',*,*,#4502,.T.);
+#4502 = EDGE_CURVE('',#2840,#4503,#4505,.T.);
+#4503 = VERTEX_POINT('',#4504);
+#4504 = CARTESIAN_POINT('',(2.5,-1.625,0.2));
+#4505 = LINE('',#4506,#4507);
+#4506 = CARTESIAN_POINT('',(2.225,-1.625,0.2));
+#4507 = VECTOR('',#4508,1.);
+#4508 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4509 = ORIENTED_EDGE('',*,*,#4510,.F.);
+#4510 = EDGE_CURVE('',#4492,#4503,#4511,.T.);
+#4511 = LINE('',#4512,#4513);
+#4512 = CARTESIAN_POINT('',(2.5,-1.625,0.E+000));
+#4513 = VECTOR('',#4514,1.);
+#4514 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4515 = PLANE('',#4516);
+#4516 = AXIS2_PLACEMENT_3D('',#4517,#4518,#4519);
+#4517 = CARTESIAN_POINT('',(2.225,-1.625,0.E+000));
+#4518 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#4519 = DIRECTION('',(1.,-3.445092848398E-016,0.E+000));
+#4520 = ADVANCED_FACE('',(#4521),#4548,.F.);
+#4521 = FACE_BOUND('',#4522,.F.);
+#4522 = EDGE_LOOP('',(#4523,#4531,#4539,#4545,#4546,#4547));
+#4523 = ORIENTED_EDGE('',*,*,#4524,.F.);
+#4524 = EDGE_CURVE('',#4525,#4467,#4527,.T.);
+#4525 = VERTEX_POINT('',#4526);
+#4526 = CARTESIAN_POINT('',(1.625,-2.5,0.E+000));
+#4527 = LINE('',#4528,#4529);
+#4528 = CARTESIAN_POINT('',(1.625,-2.5,0.E+000));
+#4529 = VECTOR('',#4530,1.);
+#4530 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4531 = ORIENTED_EDGE('',*,*,#4532,.T.);
+#4532 = EDGE_CURVE('',#4525,#4533,#4535,.T.);
+#4533 = VERTEX_POINT('',#4534);
+#4534 = CARTESIAN_POINT('',(1.625,-2.5,0.2));
+#4535 = LINE('',#4536,#4537);
+#4536 = CARTESIAN_POINT('',(1.625,-2.5,0.E+000));
+#4537 = VECTOR('',#4538,1.);
+#4538 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4539 = ORIENTED_EDGE('',*,*,#4540,.T.);
+#4540 = EDGE_CURVE('',#4533,#3162,#4541,.T.);
+#4541 = LINE('',#4542,#4543);
+#4542 = CARTESIAN_POINT('',(1.625,-2.5,0.2));
+#4543 = VECTOR('',#4544,1.);
+#4544 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4545 = ORIENTED_EDGE('',*,*,#3169,.T.);
+#4546 = ORIENTED_EDGE('',*,*,#639,.F.);
+#4547 = ORIENTED_EDGE('',*,*,#4475,.F.);
+#4548 = PLANE('',#4549);
+#4549 = AXIS2_PLACEMENT_3D('',#4550,#4551,#4552);
+#4550 = CARTESIAN_POINT('',(1.625,-2.5,0.E+000));
+#4551 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#4552 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#4553 = ADVANCED_FACE('',(#4554),#4579,.F.);
+#4554 = FACE_BOUND('',#4555,.F.);
+#4555 = EDGE_LOOP('',(#4556,#4564,#4565,#4573));
+#4556 = ORIENTED_EDGE('',*,*,#4557,.T.);
+#4557 = EDGE_CURVE('',#4558,#1126,#4560,.T.);
+#4558 = VERTEX_POINT('',#4559);
+#4559 = CARTESIAN_POINT('',(-1.575,1.375,0.E+000));
+#4560 = LINE('',#4561,#4562);
+#4561 = CARTESIAN_POINT('',(-1.575,1.375,0.E+000));
+#4562 = VECTOR('',#4563,1.);
+#4563 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4564 = ORIENTED_EDGE('',*,*,#1125,.T.);
+#4565 = ORIENTED_EDGE('',*,*,#4566,.F.);
+#4566 = EDGE_CURVE('',#4567,#1128,#4569,.T.);
+#4567 = VERTEX_POINT('',#4568);
+#4568 = CARTESIAN_POINT('',(-1.575,-1.575,0.E+000));
+#4569 = LINE('',#4570,#4571);
+#4570 = CARTESIAN_POINT('',(-1.575,-1.575,0.E+000));
+#4571 = VECTOR('',#4572,1.);
+#4572 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4573 = ORIENTED_EDGE('',*,*,#4574,.F.);
+#4574 = EDGE_CURVE('',#4558,#4567,#4575,.T.);
+#4575 = LINE('',#4576,#4577);
+#4576 = CARTESIAN_POINT('',(-1.575,1.375,0.E+000));
+#4577 = VECTOR('',#4578,1.);
+#4578 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#4579 = PLANE('',#4580);
+#4580 = AXIS2_PLACEMENT_3D('',#4581,#4582,#4583);
+#4581 = CARTESIAN_POINT('',(-1.575,1.375,0.E+000));
+#4582 = DIRECTION('',(1.,-2.22044604925E-016,0.E+000));
+#4583 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#4584 = ADVANCED_FACE('',(#4585),#4603,.F.);
+#4585 = FACE_BOUND('',#4586,.F.);
+#4586 = EDGE_LOOP('',(#4587,#4588,#4589,#4597));
+#4587 = ORIENTED_EDGE('',*,*,#4566,.T.);
+#4588 = ORIENTED_EDGE('',*,*,#1159,.T.);
+#4589 = ORIENTED_EDGE('',*,*,#4590,.F.);
+#4590 = EDGE_CURVE('',#4591,#1152,#4593,.T.);
+#4591 = VERTEX_POINT('',#4592);
+#4592 = CARTESIAN_POINT('',(1.575,-1.575,0.E+000));
+#4593 = LINE('',#4594,#4595);
+#4594 = CARTESIAN_POINT('',(1.575,-1.575,0.E+000));
+#4595 = VECTOR('',#4596,1.);
+#4596 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4597 = ORIENTED_EDGE('',*,*,#4598,.F.);
+#4598 = EDGE_CURVE('',#4567,#4591,#4599,.T.);
+#4599 = LINE('',#4600,#4601);
+#4600 = CARTESIAN_POINT('',(-1.575,-1.575,0.E+000));
+#4601 = VECTOR('',#4602,1.);
+#4602 = DIRECTION('',(1.,-1.515542541552E-016,0.E+000));
+#4603 = PLANE('',#4604);
+#4604 = AXIS2_PLACEMENT_3D('',#4605,#4606,#4607);
+#4605 = CARTESIAN_POINT('',(-1.575,-1.575,0.E+000));
+#4606 = DIRECTION('',(1.515542541552E-016,1.,0.E+000));
+#4607 = DIRECTION('',(1.,-1.515542541552E-016,0.E+000));
+#4608 = ADVANCED_FACE('',(#4609),#4627,.F.);
+#4609 = FACE_BOUND('',#4610,.F.);
+#4610 = EDGE_LOOP('',(#4611,#4612,#4613,#4621));
+#4611 = ORIENTED_EDGE('',*,*,#4590,.T.);
+#4612 = ORIENTED_EDGE('',*,*,#1151,.T.);
+#4613 = ORIENTED_EDGE('',*,*,#4614,.F.);
+#4614 = EDGE_CURVE('',#4615,#1144,#4617,.T.);
+#4615 = VERTEX_POINT('',#4616);
+#4616 = CARTESIAN_POINT('',(1.575,1.575,0.E+000));
+#4617 = LINE('',#4618,#4619);
+#4618 = CARTESIAN_POINT('',(1.575,1.575,0.E+000));
+#4619 = VECTOR('',#4620,1.);
+#4620 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4621 = ORIENTED_EDGE('',*,*,#4622,.F.);
+#4622 = EDGE_CURVE('',#4591,#4615,#4623,.T.);
+#4623 = LINE('',#4624,#4625);
+#4624 = CARTESIAN_POINT('',(1.575,-1.575,0.E+000));
+#4625 = VECTOR('',#4626,1.);
+#4626 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#4627 = PLANE('',#4628);
+#4628 = AXIS2_PLACEMENT_3D('',#4629,#4630,#4631);
+#4629 = CARTESIAN_POINT('',(1.575,-1.575,0.E+000));
+#4630 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000));
+#4631 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#4632 = ADVANCED_FACE('',(#4633),#4651,.F.);
+#4633 = FACE_BOUND('',#4634,.F.);
+#4634 = EDGE_LOOP('',(#4635,#4636,#4637,#4645));
+#4635 = ORIENTED_EDGE('',*,*,#4614,.T.);
+#4636 = ORIENTED_EDGE('',*,*,#1143,.T.);
+#4637 = ORIENTED_EDGE('',*,*,#4638,.F.);
+#4638 = EDGE_CURVE('',#4639,#1136,#4641,.T.);
+#4639 = VERTEX_POINT('',#4640);
+#4640 = CARTESIAN_POINT('',(-1.375,1.575,0.E+000));
+#4641 = LINE('',#4642,#4643);
+#4642 = CARTESIAN_POINT('',(-1.375,1.575,0.E+000));
+#4643 = VECTOR('',#4644,1.);
+#4644 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4645 = ORIENTED_EDGE('',*,*,#4646,.F.);
+#4646 = EDGE_CURVE('',#4615,#4639,#4647,.T.);
+#4647 = LINE('',#4648,#4649);
+#4648 = CARTESIAN_POINT('',(1.575,1.575,0.E+000));
+#4649 = VECTOR('',#4650,1.);
+#4650 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000));
+#4651 = PLANE('',#4652);
+#4652 = AXIS2_PLACEMENT_3D('',#4653,#4654,#4655);
+#4653 = CARTESIAN_POINT('',(1.575,1.575,0.E+000));
+#4654 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#4655 = DIRECTION('',(-1.,2.22044604925E-016,0.E+000));
+#4656 = ADVANCED_FACE('',(#4657),#4668,.F.);
+#4657 = FACE_BOUND('',#4658,.F.);
+#4658 = EDGE_LOOP('',(#4659,#4660,#4661,#4662));
+#4659 = ORIENTED_EDGE('',*,*,#4638,.T.);
+#4660 = ORIENTED_EDGE('',*,*,#1135,.T.);
+#4661 = ORIENTED_EDGE('',*,*,#4557,.F.);
+#4662 = ORIENTED_EDGE('',*,*,#4663,.F.);
+#4663 = EDGE_CURVE('',#4639,#4558,#4664,.T.);
+#4664 = LINE('',#4665,#4666);
+#4665 = CARTESIAN_POINT('',(-1.375,1.575,0.E+000));
+#4666 = VECTOR('',#4667,1.);
+#4667 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000));
+#4668 = PLANE('',#4669);
+#4669 = AXIS2_PLACEMENT_3D('',#4670,#4671,#4672);
+#4670 = CARTESIAN_POINT('',(-1.375,1.575,0.E+000));
+#4671 = DIRECTION('',(0.707106781187,-0.707106781187,0.E+000));
+#4672 = DIRECTION('',(-0.707106781187,-0.707106781187,0.E+000));
+#4673 = ADVANCED_FACE('',(#4674,#4680),#4691,.T.);
+#4674 = FACE_BOUND('',#4675,.T.);
+#4675 = EDGE_LOOP('',(#4676,#4677,#4678,#4679));
+#4676 = ORIENTED_EDGE('',*,*,#1363,.F.);
+#4677 = ORIENTED_EDGE('',*,*,#1182,.T.);
+#4678 = ORIENTED_EDGE('',*,*,#3007,.T.);
+#4679 = ORIENTED_EDGE('',*,*,#2824,.F.);
+#4680 = FACE_BOUND('',#4681,.T.);
+#4681 = EDGE_LOOP('',(#4682));
+#4682 = ORIENTED_EDGE('',*,*,#4683,.T.);
+#4683 = EDGE_CURVE('',#4684,#4684,#4686,.T.);
+#4684 = VERTEX_POINT('',#4685);
+#4685 = CARTESIAN_POINT('',(-1.9,1.65,0.92));
+#4686 = CIRCLE('',#4687,0.25);
+#4687 = AXIS2_PLACEMENT_3D('',#4688,#4689,#4690);
+#4688 = CARTESIAN_POINT('',(-1.9,1.9,0.92));
+#4689 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4690 = DIRECTION('',(6.661338147751E-016,-1.,0.E+000));
+#4691 = PLANE('',#4692);
+#4692 = AXIS2_PLACEMENT_3D('',#4693,#4694,#4695);
+#4693 = CARTESIAN_POINT('',(-2.49,2.49,0.92));
+#4694 = DIRECTION('',(0.E+000,0.E+000,1.));
+#4695 = DIRECTION('',(-2.22044604925E-016,-1.,0.E+000));
+#4696 = ADVANCED_FACE('',(#4697),#4708,.F.);
+#4697 = FACE_BOUND('',#4698,.F.);
+#4698 = EDGE_LOOP('',(#4699,#4700,#4706,#4707));
+#4699 = ORIENTED_EDGE('',*,*,#1727,.F.);
+#4700 = ORIENTED_EDGE('',*,*,#4701,.F.);
+#4701 = EDGE_CURVE('',#1607,#1720,#4702,.T.);
+#4702 = LINE('',#4703,#4704);
+#4703 = CARTESIAN_POINT('',(-2.5,1.625,0.2));
+#4704 = VECTOR('',#4705,1.);
+#4705 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4706 = ORIENTED_EDGE('',*,*,#1606,.F.);
+#4707 = ORIENTED_EDGE('',*,*,#1329,.F.);
+#4708 = PLANE('',#4709);
+#4709 = AXIS2_PLACEMENT_3D('',#4710,#4711,#4712);
+#4710 = CARTESIAN_POINT('',(-2.5,1.375,0.2));
+#4711 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4712 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4713 = ADVANCED_FACE('',(#4714),#4725,.F.);
+#4714 = FACE_BOUND('',#4715,.F.);
+#4715 = EDGE_LOOP('',(#4716,#4717,#4723,#4724));
+#4716 = ORIENTED_EDGE('',*,*,#2805,.F.);
+#4717 = ORIENTED_EDGE('',*,*,#4718,.F.);
+#4718 = EDGE_CURVE('',#2685,#2798,#4719,.T.);
+#4719 = LINE('',#4720,#4721);
+#4720 = CARTESIAN_POINT('',(-2.5,-1.375,0.2));
+#4721 = VECTOR('',#4722,1.);
+#4722 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4723 = ORIENTED_EDGE('',*,*,#2684,.F.);
+#4724 = ORIENTED_EDGE('',*,*,#1205,.F.);
+#4725 = PLANE('',#4726);
+#4726 = AXIS2_PLACEMENT_3D('',#4727,#4728,#4729);
+#4727 = CARTESIAN_POINT('',(-2.5,-1.625,0.2));
+#4728 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4729 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4730 = ADVANCED_FACE('',(#4731),#4742,.F.);
+#4731 = FACE_BOUND('',#4732,.F.);
+#4732 = EDGE_LOOP('',(#4733,#4734,#4740,#4741));
+#4733 = ORIENTED_EDGE('',*,*,#2609,.F.);
+#4734 = ORIENTED_EDGE('',*,*,#4735,.F.);
+#4735 = EDGE_CURVE('',#2489,#2602,#4736,.T.);
+#4736 = LINE('',#4737,#4738);
+#4737 = CARTESIAN_POINT('',(-2.5,-0.875,0.2));
+#4738 = VECTOR('',#4739,1.);
+#4739 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4740 = ORIENTED_EDGE('',*,*,#2488,.F.);
+#4741 = ORIENTED_EDGE('',*,*,#1228,.F.);
+#4742 = PLANE('',#4743);
+#4743 = AXIS2_PLACEMENT_3D('',#4744,#4745,#4746);
+#4744 = CARTESIAN_POINT('',(-2.5,-1.125,0.2));
+#4745 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4746 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4747 = ADVANCED_FACE('',(#4748),#4759,.F.);
+#4748 = FACE_BOUND('',#4749,.F.);
+#4749 = EDGE_LOOP('',(#4750,#4751,#4757,#4758));
+#4750 = ORIENTED_EDGE('',*,*,#2021,.F.);
+#4751 = ORIENTED_EDGE('',*,*,#4752,.F.);
+#4752 = EDGE_CURVE('',#1901,#2014,#4753,.T.);
+#4753 = LINE('',#4754,#4755);
+#4754 = CARTESIAN_POINT('',(-2.5,0.625,0.2));
+#4755 = VECTOR('',#4756,1.);
+#4756 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4757 = ORIENTED_EDGE('',*,*,#1900,.F.);
+#4758 = ORIENTED_EDGE('',*,*,#1297,.F.);
+#4759 = PLANE('',#4760);
+#4760 = AXIS2_PLACEMENT_3D('',#4761,#4762,#4763);
+#4761 = CARTESIAN_POINT('',(-2.5,0.375,0.2));
+#4762 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4763 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4764 = ADVANCED_FACE('',(#4765),#4776,.F.);
+#4765 = FACE_BOUND('',#4766,.F.);
+#4766 = EDGE_LOOP('',(#4767,#4768,#4774,#4775));
+#4767 = ORIENTED_EDGE('',*,*,#2413,.F.);
+#4768 = ORIENTED_EDGE('',*,*,#4769,.F.);
+#4769 = EDGE_CURVE('',#2293,#2406,#4770,.T.);
+#4770 = LINE('',#4771,#4772);
+#4771 = CARTESIAN_POINT('',(-2.5,-0.375,0.2));
+#4772 = VECTOR('',#4773,1.);
+#4773 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4774 = ORIENTED_EDGE('',*,*,#2292,.F.);
+#4775 = ORIENTED_EDGE('',*,*,#1251,.F.);
+#4776 = PLANE('',#4777);
+#4777 = AXIS2_PLACEMENT_3D('',#4778,#4779,#4780);
+#4778 = CARTESIAN_POINT('',(-2.5,-0.625,0.2));
+#4779 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4780 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4781 = ADVANCED_FACE('',(#4782),#4793,.F.);
+#4782 = FACE_BOUND('',#4783,.F.);
+#4783 = EDGE_LOOP('',(#4784,#4785,#4791,#4792));
+#4784 = ORIENTED_EDGE('',*,*,#2217,.F.);
+#4785 = ORIENTED_EDGE('',*,*,#4786,.F.);
+#4786 = EDGE_CURVE('',#2097,#2210,#4787,.T.);
+#4787 = LINE('',#4788,#4789);
+#4788 = CARTESIAN_POINT('',(-2.5,0.125,0.2));
+#4789 = VECTOR('',#4790,1.);
+#4790 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4791 = ORIENTED_EDGE('',*,*,#2096,.F.);
+#4792 = ORIENTED_EDGE('',*,*,#1274,.F.);
+#4793 = PLANE('',#4794);
+#4794 = AXIS2_PLACEMENT_3D('',#4795,#4796,#4797);
+#4795 = CARTESIAN_POINT('',(-2.5,-0.125,0.2));
+#4796 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4797 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4798 = ADVANCED_FACE('',(#4799),#4810,.F.);
+#4799 = FACE_BOUND('',#4800,.F.);
+#4800 = EDGE_LOOP('',(#4801,#4802,#4808,#4809));
+#4801 = ORIENTED_EDGE('',*,*,#2644,.F.);
+#4802 = ORIENTED_EDGE('',*,*,#4803,.F.);
+#4803 = EDGE_CURVE('',#2768,#2637,#4804,.T.);
+#4804 = LINE('',#4805,#4806);
+#4805 = CARTESIAN_POINT('',(1.625,2.5,0.2));
+#4806 = VECTOR('',#4807,1.);
+#4807 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4808 = ORIENTED_EDGE('',*,*,#2767,.F.);
+#4809 = ORIENTED_EDGE('',*,*,#1519,.F.);
+#4810 = PLANE('',#4811);
+#4811 = AXIS2_PLACEMENT_3D('',#4812,#4813,#4814);
+#4812 = CARTESIAN_POINT('',(1.375,2.5,0.2));
+#4813 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4814 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4815 = ADVANCED_FACE('',(#4816),#4827,.F.);
+#4816 = FACE_BOUND('',#4817,.F.);
+#4817 = EDGE_LOOP('',(#4818,#4819,#4825,#4826));
+#4818 = ORIENTED_EDGE('',*,*,#1566,.F.);
+#4819 = ORIENTED_EDGE('',*,*,#4820,.F.);
+#4820 = EDGE_CURVE('',#1690,#1559,#4821,.T.);
+#4821 = LINE('',#4822,#4823);
+#4822 = CARTESIAN_POINT('',(-1.375,2.5,0.2));
+#4823 = VECTOR('',#4824,1.);
+#4824 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4825 = ORIENTED_EDGE('',*,*,#1689,.F.);
+#4826 = ORIENTED_EDGE('',*,*,#1381,.F.);
+#4827 = PLANE('',#4828);
+#4828 = AXIS2_PLACEMENT_3D('',#4829,#4830,#4831);
+#4829 = CARTESIAN_POINT('',(-1.625,2.5,0.2));
+#4830 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4831 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4832 = ADVANCED_FACE('',(#4833),#4844,.F.);
+#4833 = FACE_BOUND('',#4834,.F.);
+#4834 = EDGE_LOOP('',(#4835,#4836,#4842,#4843));
+#4835 = ORIENTED_EDGE('',*,*,#2448,.F.);
+#4836 = ORIENTED_EDGE('',*,*,#4837,.F.);
+#4837 = EDGE_CURVE('',#2572,#2441,#4838,.T.);
+#4838 = LINE('',#4839,#4840);
+#4839 = CARTESIAN_POINT('',(1.125,2.5,0.2));
+#4840 = VECTOR('',#4841,1.);
+#4841 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4842 = ORIENTED_EDGE('',*,*,#2571,.F.);
+#4843 = ORIENTED_EDGE('',*,*,#1496,.F.);
+#4844 = PLANE('',#4845);
+#4845 = AXIS2_PLACEMENT_3D('',#4846,#4847,#4848);
+#4846 = CARTESIAN_POINT('',(0.875,2.5,0.2));
+#4847 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4848 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4849 = ADVANCED_FACE('',(#4850),#4861,.F.);
+#4850 = FACE_BOUND('',#4851,.F.);
+#4851 = EDGE_LOOP('',(#4852,#4853,#4859,#4860));
+#4852 = ORIENTED_EDGE('',*,*,#1762,.F.);
+#4853 = ORIENTED_EDGE('',*,*,#4854,.F.);
+#4854 = EDGE_CURVE('',#1821,#1755,#4855,.T.);
+#4855 = LINE('',#4856,#4857);
+#4856 = CARTESIAN_POINT('',(-0.875,2.5,0.2));
+#4857 = VECTOR('',#4858,1.);
+#4858 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4859 = ORIENTED_EDGE('',*,*,#1820,.F.);
+#4860 = ORIENTED_EDGE('',*,*,#1404,.F.);
+#4861 = PLANE('',#4862);
+#4862 = AXIS2_PLACEMENT_3D('',#4863,#4864,#4865);
+#4863 = CARTESIAN_POINT('',(-1.125,2.5,0.2));
+#4864 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4865 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4866 = ADVANCED_FACE('',(#4867),#4878,.F.);
+#4867 = FACE_BOUND('',#4868,.F.);
+#4868 = EDGE_LOOP('',(#4869,#4870,#4876,#4877));
+#4869 = ORIENTED_EDGE('',*,*,#2252,.F.);
+#4870 = ORIENTED_EDGE('',*,*,#4871,.F.);
+#4871 = EDGE_CURVE('',#2376,#2245,#4872,.T.);
+#4872 = LINE('',#4873,#4874);
+#4873 = CARTESIAN_POINT('',(0.625,2.5,0.2));
+#4874 = VECTOR('',#4875,1.);
+#4875 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4876 = ORIENTED_EDGE('',*,*,#2375,.F.);
+#4877 = ORIENTED_EDGE('',*,*,#1473,.F.);
+#4878 = PLANE('',#4879);
+#4879 = AXIS2_PLACEMENT_3D('',#4880,#4881,#4882);
+#4880 = CARTESIAN_POINT('',(0.375,2.5,0.2));
+#4881 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4882 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4883 = ADVANCED_FACE('',(#4884),#4895,.F.);
+#4884 = FACE_BOUND('',#4885,.F.);
+#4885 = EDGE_LOOP('',(#4886,#4887,#4893,#4894));
+#4886 = ORIENTED_EDGE('',*,*,#1860,.F.);
+#4887 = ORIENTED_EDGE('',*,*,#4888,.F.);
+#4888 = EDGE_CURVE('',#1984,#1853,#4889,.T.);
+#4889 = LINE('',#4890,#4891);
+#4890 = CARTESIAN_POINT('',(-0.375,2.5,0.2));
+#4891 = VECTOR('',#4892,1.);
+#4892 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4893 = ORIENTED_EDGE('',*,*,#1983,.F.);
+#4894 = ORIENTED_EDGE('',*,*,#1427,.F.);
+#4895 = PLANE('',#4896);
+#4896 = AXIS2_PLACEMENT_3D('',#4897,#4898,#4899);
+#4897 = CARTESIAN_POINT('',(-0.625,2.5,0.2));
+#4898 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4899 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4900 = ADVANCED_FACE('',(#4901),#4912,.F.);
+#4901 = FACE_BOUND('',#4902,.F.);
+#4902 = EDGE_LOOP('',(#4903,#4904,#4910,#4911));
+#4903 = ORIENTED_EDGE('',*,*,#2056,.F.);
+#4904 = ORIENTED_EDGE('',*,*,#4905,.F.);
+#4905 = EDGE_CURVE('',#2180,#2049,#4906,.T.);
+#4906 = LINE('',#4907,#4908);
+#4907 = CARTESIAN_POINT('',(0.125,2.5,0.2));
+#4908 = VECTOR('',#4909,1.);
+#4909 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4910 = ORIENTED_EDGE('',*,*,#2179,.F.);
+#4911 = ORIENTED_EDGE('',*,*,#1450,.F.);
+#4912 = PLANE('',#4913);
+#4913 = AXIS2_PLACEMENT_3D('',#4914,#4915,#4916);
+#4914 = CARTESIAN_POINT('',(-0.125,2.5,0.2));
+#4915 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4916 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4917 = ADVANCED_FACE('',(#4918),#4929,.T.);
+#4918 = FACE_BOUND('',#4919,.F.);
+#4919 = EDGE_LOOP('',(#4920,#4921,#4922,#4923));
+#4920 = ORIENTED_EDGE('',*,*,#1548,.T.);
+#4921 = ORIENTED_EDGE('',*,*,#1628,.T.);
+#4922 = ORIENTED_EDGE('',*,*,#1678,.T.);
+#4923 = ORIENTED_EDGE('',*,*,#4924,.T.);
+#4924 = EDGE_CURVE('',#1679,#1549,#4925,.T.);
+#4925 = LINE('',#4926,#4927);
+#4926 = CARTESIAN_POINT('',(-1.375,2.5,0.E+000));
+#4927 = VECTOR('',#4928,1.);
+#4928 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4929 = PLANE('',#4930);
+#4930 = AXIS2_PLACEMENT_3D('',#4931,#4932,#4933);
+#4931 = CARTESIAN_POINT('',(-1.625,2.5,0.E+000));
+#4932 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4933 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4934 = ADVANCED_FACE('',(#4935),#4941,.F.);
+#4935 = FACE_BOUND('',#4936,.F.);
+#4936 = EDGE_LOOP('',(#4937,#4938,#4939,#4940));
+#4937 = ORIENTED_EDGE('',*,*,#1697,.T.);
+#4938 = ORIENTED_EDGE('',*,*,#4820,.T.);
+#4939 = ORIENTED_EDGE('',*,*,#1558,.F.);
+#4940 = ORIENTED_EDGE('',*,*,#4924,.F.);
+#4941 = PLANE('',#4942);
+#4942 = AXIS2_PLACEMENT_3D('',#4943,#4944,#4945);
+#4943 = CARTESIAN_POINT('',(-1.375,2.5,0.E+000));
+#4944 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#4945 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4946 = ADVANCED_FACE('',(#4947),#4958,.T.);
+#4947 = FACE_BOUND('',#4948,.F.);
+#4948 = EDGE_LOOP('',(#4949,#4950,#4951,#4952));
+#4949 = ORIENTED_EDGE('',*,*,#1711,.T.);
+#4950 = ORIENTED_EDGE('',*,*,#1653,.T.);
+#4951 = ORIENTED_EDGE('',*,*,#1588,.T.);
+#4952 = ORIENTED_EDGE('',*,*,#4953,.T.);
+#4953 = EDGE_CURVE('',#1591,#1712,#4954,.T.);
+#4954 = LINE('',#4955,#4956);
+#4955 = CARTESIAN_POINT('',(-2.5,1.625,0.E+000));
+#4956 = VECTOR('',#4957,1.);
+#4957 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4958 = PLANE('',#4959);
+#4959 = AXIS2_PLACEMENT_3D('',#4960,#4961,#4962);
+#4960 = CARTESIAN_POINT('',(-2.5,1.375,0.E+000));
+#4961 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#4962 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#4963 = ADVANCED_FACE('',(#4964),#4970,.F.);
+#4964 = FACE_BOUND('',#4965,.F.);
+#4965 = EDGE_LOOP('',(#4966,#4967,#4968,#4969));
+#4966 = ORIENTED_EDGE('',*,*,#1614,.T.);
+#4967 = ORIENTED_EDGE('',*,*,#4701,.T.);
+#4968 = ORIENTED_EDGE('',*,*,#1719,.F.);
+#4969 = ORIENTED_EDGE('',*,*,#4953,.F.);
+#4970 = PLANE('',#4971);
+#4971 = AXIS2_PLACEMENT_3D('',#4972,#4973,#4974);
+#4972 = CARTESIAN_POINT('',(-2.5,1.625,0.E+000));
+#4973 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#4974 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#4975 = ADVANCED_FACE('',(#4976),#4987,.T.);
+#4976 = FACE_BOUND('',#4977,.F.);
+#4977 = EDGE_LOOP('',(#4978,#4979,#4980,#4981));
+#4978 = ORIENTED_EDGE('',*,*,#1744,.T.);
+#4979 = ORIENTED_EDGE('',*,*,#1784,.T.);
+#4980 = ORIENTED_EDGE('',*,*,#1809,.T.);
+#4981 = ORIENTED_EDGE('',*,*,#4982,.T.);
+#4982 = EDGE_CURVE('',#1810,#1745,#4983,.T.);
+#4983 = LINE('',#4984,#4985);
+#4984 = CARTESIAN_POINT('',(-0.875,2.5,0.E+000));
+#4985 = VECTOR('',#4986,1.);
+#4986 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#4987 = PLANE('',#4988);
+#4988 = AXIS2_PLACEMENT_3D('',#4989,#4990,#4991);
+#4989 = CARTESIAN_POINT('',(-1.125,2.5,0.E+000));
+#4990 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#4991 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#4992 = ADVANCED_FACE('',(#4993),#4999,.F.);
+#4993 = FACE_BOUND('',#4994,.F.);
+#4994 = EDGE_LOOP('',(#4995,#4996,#4997,#4998));
+#4995 = ORIENTED_EDGE('',*,*,#1828,.T.);
+#4996 = ORIENTED_EDGE('',*,*,#4854,.T.);
+#4997 = ORIENTED_EDGE('',*,*,#1754,.F.);
+#4998 = ORIENTED_EDGE('',*,*,#4982,.F.);
+#4999 = PLANE('',#5000);
+#5000 = AXIS2_PLACEMENT_3D('',#5001,#5002,#5003);
+#5001 = CARTESIAN_POINT('',(-0.875,2.5,0.E+000));
+#5002 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5003 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5004 = ADVANCED_FACE('',(#5005),#5016,.T.);
+#5005 = FACE_BOUND('',#5006,.F.);
+#5006 = EDGE_LOOP('',(#5007,#5008,#5009,#5010));
+#5007 = ORIENTED_EDGE('',*,*,#1842,.T.);
+#5008 = ORIENTED_EDGE('',*,*,#1922,.T.);
+#5009 = ORIENTED_EDGE('',*,*,#1972,.T.);
+#5010 = ORIENTED_EDGE('',*,*,#5011,.T.);
+#5011 = EDGE_CURVE('',#1973,#1843,#5012,.T.);
+#5012 = LINE('',#5013,#5014);
+#5013 = CARTESIAN_POINT('',(-0.375,2.5,0.E+000));
+#5014 = VECTOR('',#5015,1.);
+#5015 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5016 = PLANE('',#5017);
+#5017 = AXIS2_PLACEMENT_3D('',#5018,#5019,#5020);
+#5018 = CARTESIAN_POINT('',(-0.625,2.5,0.E+000));
+#5019 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5020 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#5021 = ADVANCED_FACE('',(#5022),#5028,.F.);
+#5022 = FACE_BOUND('',#5023,.F.);
+#5023 = EDGE_LOOP('',(#5024,#5025,#5026,#5027));
+#5024 = ORIENTED_EDGE('',*,*,#1991,.T.);
+#5025 = ORIENTED_EDGE('',*,*,#4888,.T.);
+#5026 = ORIENTED_EDGE('',*,*,#1852,.F.);
+#5027 = ORIENTED_EDGE('',*,*,#5011,.F.);
+#5028 = PLANE('',#5029);
+#5029 = AXIS2_PLACEMENT_3D('',#5030,#5031,#5032);
+#5030 = CARTESIAN_POINT('',(-0.375,2.5,0.E+000));
+#5031 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5032 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5033 = ADVANCED_FACE('',(#5034),#5045,.T.);
+#5034 = FACE_BOUND('',#5035,.F.);
+#5035 = EDGE_LOOP('',(#5036,#5037,#5038,#5039));
+#5036 = ORIENTED_EDGE('',*,*,#2005,.T.);
+#5037 = ORIENTED_EDGE('',*,*,#1947,.T.);
+#5038 = ORIENTED_EDGE('',*,*,#1882,.T.);
+#5039 = ORIENTED_EDGE('',*,*,#5040,.T.);
+#5040 = EDGE_CURVE('',#1885,#2006,#5041,.T.);
+#5041 = LINE('',#5042,#5043);
+#5042 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000));
+#5043 = VECTOR('',#5044,1.);
+#5044 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5045 = PLANE('',#5046);
+#5046 = AXIS2_PLACEMENT_3D('',#5047,#5048,#5049);
+#5047 = CARTESIAN_POINT('',(-2.5,0.375,0.E+000));
+#5048 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5049 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#5050 = ADVANCED_FACE('',(#5051),#5057,.F.);
+#5051 = FACE_BOUND('',#5052,.F.);
+#5052 = EDGE_LOOP('',(#5053,#5054,#5055,#5056));
+#5053 = ORIENTED_EDGE('',*,*,#1908,.T.);
+#5054 = ORIENTED_EDGE('',*,*,#4752,.T.);
+#5055 = ORIENTED_EDGE('',*,*,#2013,.F.);
+#5056 = ORIENTED_EDGE('',*,*,#5040,.F.);
+#5057 = PLANE('',#5058);
+#5058 = AXIS2_PLACEMENT_3D('',#5059,#5060,#5061);
+#5059 = CARTESIAN_POINT('',(-2.5,0.625,0.E+000));
+#5060 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#5061 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5062 = ADVANCED_FACE('',(#5063),#5074,.T.);
+#5063 = FACE_BOUND('',#5064,.F.);
+#5064 = EDGE_LOOP('',(#5065,#5066,#5067,#5068));
+#5065 = ORIENTED_EDGE('',*,*,#2038,.T.);
+#5066 = ORIENTED_EDGE('',*,*,#2118,.T.);
+#5067 = ORIENTED_EDGE('',*,*,#2168,.T.);
+#5068 = ORIENTED_EDGE('',*,*,#5069,.T.);
+#5069 = EDGE_CURVE('',#2169,#2039,#5070,.T.);
+#5070 = LINE('',#5071,#5072);
+#5071 = CARTESIAN_POINT('',(0.125,2.5,0.E+000));
+#5072 = VECTOR('',#5073,1.);
+#5073 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5074 = PLANE('',#5075);
+#5075 = AXIS2_PLACEMENT_3D('',#5076,#5077,#5078);
+#5076 = CARTESIAN_POINT('',(-0.125,2.5,0.E+000));
+#5077 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5078 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#5079 = ADVANCED_FACE('',(#5080),#5086,.F.);
+#5080 = FACE_BOUND('',#5081,.F.);
+#5081 = EDGE_LOOP('',(#5082,#5083,#5084,#5085));
+#5082 = ORIENTED_EDGE('',*,*,#2187,.T.);
+#5083 = ORIENTED_EDGE('',*,*,#4905,.T.);
+#5084 = ORIENTED_EDGE('',*,*,#2048,.F.);
+#5085 = ORIENTED_EDGE('',*,*,#5069,.F.);
+#5086 = PLANE('',#5087);
+#5087 = AXIS2_PLACEMENT_3D('',#5088,#5089,#5090);
+#5088 = CARTESIAN_POINT('',(0.125,2.5,0.E+000));
+#5089 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5090 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5091 = ADVANCED_FACE('',(#5092),#5103,.T.);
+#5092 = FACE_BOUND('',#5093,.F.);
+#5093 = EDGE_LOOP('',(#5094,#5095,#5096,#5097));
+#5094 = ORIENTED_EDGE('',*,*,#2201,.T.);
+#5095 = ORIENTED_EDGE('',*,*,#2143,.T.);
+#5096 = ORIENTED_EDGE('',*,*,#2078,.T.);
+#5097 = ORIENTED_EDGE('',*,*,#5098,.T.);
+#5098 = EDGE_CURVE('',#2081,#2202,#5099,.T.);
+#5099 = LINE('',#5100,#5101);
+#5100 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000));
+#5101 = VECTOR('',#5102,1.);
+#5102 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5103 = PLANE('',#5104);
+#5104 = AXIS2_PLACEMENT_3D('',#5105,#5106,#5107);
+#5105 = CARTESIAN_POINT('',(-2.5,-0.125,0.E+000));
+#5106 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5107 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#5108 = ADVANCED_FACE('',(#5109),#5115,.F.);
+#5109 = FACE_BOUND('',#5110,.F.);
+#5110 = EDGE_LOOP('',(#5111,#5112,#5113,#5114));
+#5111 = ORIENTED_EDGE('',*,*,#2104,.T.);
+#5112 = ORIENTED_EDGE('',*,*,#4786,.T.);
+#5113 = ORIENTED_EDGE('',*,*,#2209,.F.);
+#5114 = ORIENTED_EDGE('',*,*,#5098,.F.);
+#5115 = PLANE('',#5116);
+#5116 = AXIS2_PLACEMENT_3D('',#5117,#5118,#5119);
+#5117 = CARTESIAN_POINT('',(-2.5,0.125,0.E+000));
+#5118 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#5119 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5120 = ADVANCED_FACE('',(#5121),#5132,.T.);
+#5121 = FACE_BOUND('',#5122,.F.);
+#5122 = EDGE_LOOP('',(#5123,#5124,#5125,#5126));
+#5123 = ORIENTED_EDGE('',*,*,#2234,.T.);
+#5124 = ORIENTED_EDGE('',*,*,#2314,.T.);
+#5125 = ORIENTED_EDGE('',*,*,#2364,.T.);
+#5126 = ORIENTED_EDGE('',*,*,#5127,.T.);
+#5127 = EDGE_CURVE('',#2365,#2235,#5128,.T.);
+#5128 = LINE('',#5129,#5130);
+#5129 = CARTESIAN_POINT('',(0.625,2.5,0.E+000));
+#5130 = VECTOR('',#5131,1.);
+#5131 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5132 = PLANE('',#5133);
+#5133 = AXIS2_PLACEMENT_3D('',#5134,#5135,#5136);
+#5134 = CARTESIAN_POINT('',(0.375,2.5,0.E+000));
+#5135 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5136 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#5137 = ADVANCED_FACE('',(#5138),#5144,.F.);
+#5138 = FACE_BOUND('',#5139,.F.);
+#5139 = EDGE_LOOP('',(#5140,#5141,#5142,#5143));
+#5140 = ORIENTED_EDGE('',*,*,#2383,.T.);
+#5141 = ORIENTED_EDGE('',*,*,#4871,.T.);
+#5142 = ORIENTED_EDGE('',*,*,#2244,.F.);
+#5143 = ORIENTED_EDGE('',*,*,#5127,.F.);
+#5144 = PLANE('',#5145);
+#5145 = AXIS2_PLACEMENT_3D('',#5146,#5147,#5148);
+#5146 = CARTESIAN_POINT('',(0.625,2.5,0.E+000));
+#5147 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5148 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5149 = ADVANCED_FACE('',(#5150),#5161,.T.);
+#5150 = FACE_BOUND('',#5151,.F.);
+#5151 = EDGE_LOOP('',(#5152,#5153,#5154,#5155));
+#5152 = ORIENTED_EDGE('',*,*,#2397,.T.);
+#5153 = ORIENTED_EDGE('',*,*,#2339,.T.);
+#5154 = ORIENTED_EDGE('',*,*,#2274,.T.);
+#5155 = ORIENTED_EDGE('',*,*,#5156,.T.);
+#5156 = EDGE_CURVE('',#2277,#2398,#5157,.T.);
+#5157 = LINE('',#5158,#5159);
+#5158 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000));
+#5159 = VECTOR('',#5160,1.);
+#5160 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5161 = PLANE('',#5162);
+#5162 = AXIS2_PLACEMENT_3D('',#5163,#5164,#5165);
+#5163 = CARTESIAN_POINT('',(-2.5,-0.625,0.E+000));
+#5164 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5165 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#5166 = ADVANCED_FACE('',(#5167),#5173,.F.);
+#5167 = FACE_BOUND('',#5168,.F.);
+#5168 = EDGE_LOOP('',(#5169,#5170,#5171,#5172));
+#5169 = ORIENTED_EDGE('',*,*,#2300,.T.);
+#5170 = ORIENTED_EDGE('',*,*,#4769,.T.);
+#5171 = ORIENTED_EDGE('',*,*,#2405,.F.);
+#5172 = ORIENTED_EDGE('',*,*,#5156,.F.);
+#5173 = PLANE('',#5174);
+#5174 = AXIS2_PLACEMENT_3D('',#5175,#5176,#5177);
+#5175 = CARTESIAN_POINT('',(-2.5,-0.375,0.E+000));
+#5176 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#5177 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5178 = ADVANCED_FACE('',(#5179),#5190,.T.);
+#5179 = FACE_BOUND('',#5180,.F.);
+#5180 = EDGE_LOOP('',(#5181,#5182,#5183,#5184));
+#5181 = ORIENTED_EDGE('',*,*,#2430,.T.);
+#5182 = ORIENTED_EDGE('',*,*,#2510,.T.);
+#5183 = ORIENTED_EDGE('',*,*,#2560,.T.);
+#5184 = ORIENTED_EDGE('',*,*,#5185,.T.);
+#5185 = EDGE_CURVE('',#2561,#2431,#5186,.T.);
+#5186 = LINE('',#5187,#5188);
+#5187 = CARTESIAN_POINT('',(1.125,2.5,0.E+000));
+#5188 = VECTOR('',#5189,1.);
+#5189 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5190 = PLANE('',#5191);
+#5191 = AXIS2_PLACEMENT_3D('',#5192,#5193,#5194);
+#5192 = CARTESIAN_POINT('',(0.875,2.5,0.E+000));
+#5193 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5194 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#5195 = ADVANCED_FACE('',(#5196),#5202,.F.);
+#5196 = FACE_BOUND('',#5197,.F.);
+#5197 = EDGE_LOOP('',(#5198,#5199,#5200,#5201));
+#5198 = ORIENTED_EDGE('',*,*,#2579,.T.);
+#5199 = ORIENTED_EDGE('',*,*,#4837,.T.);
+#5200 = ORIENTED_EDGE('',*,*,#2440,.F.);
+#5201 = ORIENTED_EDGE('',*,*,#5185,.F.);
+#5202 = PLANE('',#5203);
+#5203 = AXIS2_PLACEMENT_3D('',#5204,#5205,#5206);
+#5204 = CARTESIAN_POINT('',(1.125,2.5,0.E+000));
+#5205 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5206 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5207 = ADVANCED_FACE('',(#5208),#5219,.T.);
+#5208 = FACE_BOUND('',#5209,.F.);
+#5209 = EDGE_LOOP('',(#5210,#5211,#5212,#5213));
+#5210 = ORIENTED_EDGE('',*,*,#2593,.T.);
+#5211 = ORIENTED_EDGE('',*,*,#2535,.T.);
+#5212 = ORIENTED_EDGE('',*,*,#2470,.T.);
+#5213 = ORIENTED_EDGE('',*,*,#5214,.T.);
+#5214 = EDGE_CURVE('',#2473,#2594,#5215,.T.);
+#5215 = LINE('',#5216,#5217);
+#5216 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000));
+#5217 = VECTOR('',#5218,1.);
+#5218 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5219 = PLANE('',#5220);
+#5220 = AXIS2_PLACEMENT_3D('',#5221,#5222,#5223);
+#5221 = CARTESIAN_POINT('',(-2.5,-1.125,0.E+000));
+#5222 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5223 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#5224 = ADVANCED_FACE('',(#5225),#5231,.F.);
+#5225 = FACE_BOUND('',#5226,.F.);
+#5226 = EDGE_LOOP('',(#5227,#5228,#5229,#5230));
+#5227 = ORIENTED_EDGE('',*,*,#2496,.T.);
+#5228 = ORIENTED_EDGE('',*,*,#4735,.T.);
+#5229 = ORIENTED_EDGE('',*,*,#2601,.F.);
+#5230 = ORIENTED_EDGE('',*,*,#5214,.F.);
+#5231 = PLANE('',#5232);
+#5232 = AXIS2_PLACEMENT_3D('',#5233,#5234,#5235);
+#5233 = CARTESIAN_POINT('',(-2.5,-0.875,0.E+000));
+#5234 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#5235 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5236 = ADVANCED_FACE('',(#5237),#5248,.T.);
+#5237 = FACE_BOUND('',#5238,.F.);
+#5238 = EDGE_LOOP('',(#5239,#5240,#5241,#5242));
+#5239 = ORIENTED_EDGE('',*,*,#2626,.T.);
+#5240 = ORIENTED_EDGE('',*,*,#2706,.T.);
+#5241 = ORIENTED_EDGE('',*,*,#2756,.T.);
+#5242 = ORIENTED_EDGE('',*,*,#5243,.T.);
+#5243 = EDGE_CURVE('',#2757,#2627,#5244,.T.);
+#5244 = LINE('',#5245,#5246);
+#5245 = CARTESIAN_POINT('',(1.625,2.5,0.E+000));
+#5246 = VECTOR('',#5247,1.);
+#5247 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5248 = PLANE('',#5249);
+#5249 = AXIS2_PLACEMENT_3D('',#5250,#5251,#5252);
+#5250 = CARTESIAN_POINT('',(1.375,2.5,0.E+000));
+#5251 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5252 = DIRECTION('',(1.,-4.555315873023E-016,0.E+000));
+#5253 = ADVANCED_FACE('',(#5254),#5260,.F.);
+#5254 = FACE_BOUND('',#5255,.F.);
+#5255 = EDGE_LOOP('',(#5256,#5257,#5258,#5259));
+#5256 = ORIENTED_EDGE('',*,*,#2775,.T.);
+#5257 = ORIENTED_EDGE('',*,*,#4803,.T.);
+#5258 = ORIENTED_EDGE('',*,*,#2636,.F.);
+#5259 = ORIENTED_EDGE('',*,*,#5243,.F.);
+#5260 = PLANE('',#5261);
+#5261 = AXIS2_PLACEMENT_3D('',#5262,#5263,#5264);
+#5262 = CARTESIAN_POINT('',(1.625,2.5,0.E+000));
+#5263 = DIRECTION('',(-4.555315873023E-016,-1.,0.E+000));
+#5264 = DIRECTION('',(-1.,4.555315873023E-016,0.E+000));
+#5265 = ADVANCED_FACE('',(#5266),#5277,.T.);
+#5266 = FACE_BOUND('',#5267,.F.);
+#5267 = EDGE_LOOP('',(#5268,#5269,#5270,#5271));
+#5268 = ORIENTED_EDGE('',*,*,#2789,.T.);
+#5269 = ORIENTED_EDGE('',*,*,#2731,.T.);
+#5270 = ORIENTED_EDGE('',*,*,#2666,.T.);
+#5271 = ORIENTED_EDGE('',*,*,#5272,.T.);
+#5272 = EDGE_CURVE('',#2669,#2790,#5273,.T.);
+#5273 = LINE('',#5274,#5275);
+#5274 = CARTESIAN_POINT('',(-2.5,-1.375,0.E+000));
+#5275 = VECTOR('',#5276,1.);
+#5276 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5277 = PLANE('',#5278);
+#5278 = AXIS2_PLACEMENT_3D('',#5279,#5280,#5281);
+#5279 = CARTESIAN_POINT('',(-2.5,-1.625,0.E+000));
+#5280 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5281 = DIRECTION('',(4.669739647545E-016,1.,0.E+000));
+#5282 = ADVANCED_FACE('',(#5283),#5289,.F.);
+#5283 = FACE_BOUND('',#5284,.F.);
+#5284 = EDGE_LOOP('',(#5285,#5286,#5287,#5288));
+#5285 = ORIENTED_EDGE('',*,*,#2692,.T.);
+#5286 = ORIENTED_EDGE('',*,*,#4718,.T.);
+#5287 = ORIENTED_EDGE('',*,*,#2797,.F.);
+#5288 = ORIENTED_EDGE('',*,*,#5272,.F.);
+#5289 = PLANE('',#5290);
+#5290 = AXIS2_PLACEMENT_3D('',#5291,#5292,#5293);
+#5291 = CARTESIAN_POINT('',(-2.5,-1.375,0.E+000));
+#5292 = DIRECTION('',(1.,-4.669739647545E-016,0.E+000));
+#5293 = DIRECTION('',(-4.669739647545E-016,-1.,0.E+000));
+#5294 = ADVANCED_FACE('',(#5295),#5306,.F.);
+#5295 = FACE_BOUND('',#5296,.F.);
+#5296 = EDGE_LOOP('',(#5297,#5298,#5304,#5305));
+#5297 = ORIENTED_EDGE('',*,*,#3203,.F.);
+#5298 = ORIENTED_EDGE('',*,*,#5299,.F.);
+#5299 = EDGE_CURVE('',#3327,#3196,#5300,.T.);
+#5300 = LINE('',#5301,#5302);
+#5301 = CARTESIAN_POINT('',(2.5,1.375,0.2));
+#5302 = VECTOR('',#5303,1.);
+#5303 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5304 = ORIENTED_EDGE('',*,*,#3326,.F.);
+#5305 = ORIENTED_EDGE('',*,*,#2985,.T.);
+#5306 = PLANE('',#5307);
+#5307 = AXIS2_PLACEMENT_3D('',#5308,#5309,#5310);
+#5308 = CARTESIAN_POINT('',(2.5,1.625,0.2));
+#5309 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5310 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5311 = ADVANCED_FACE('',(#5312),#5323,.F.);
+#5312 = FACE_BOUND('',#5313,.F.);
+#5313 = EDGE_LOOP('',(#5314,#5315,#5321,#5322));
+#5314 = ORIENTED_EDGE('',*,*,#4379,.F.);
+#5315 = ORIENTED_EDGE('',*,*,#5316,.F.);
+#5316 = EDGE_CURVE('',#4503,#4372,#5317,.T.);
+#5317 = LINE('',#5318,#5319);
+#5318 = CARTESIAN_POINT('',(2.5,-1.625,0.2));
+#5319 = VECTOR('',#5320,1.);
+#5320 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5321 = ORIENTED_EDGE('',*,*,#4502,.F.);
+#5322 = ORIENTED_EDGE('',*,*,#2847,.T.);
+#5323 = PLANE('',#5324);
+#5324 = AXIS2_PLACEMENT_3D('',#5325,#5326,#5327);
+#5325 = CARTESIAN_POINT('',(2.5,-1.375,0.2));
+#5326 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5327 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5328 = ADVANCED_FACE('',(#5329),#5340,.F.);
+#5329 = FACE_BOUND('',#5330,.F.);
+#5330 = EDGE_LOOP('',(#5331,#5332,#5338,#5339));
+#5331 = ORIENTED_EDGE('',*,*,#3399,.F.);
+#5332 = ORIENTED_EDGE('',*,*,#5333,.F.);
+#5333 = EDGE_CURVE('',#3523,#3392,#5334,.T.);
+#5334 = LINE('',#5335,#5336);
+#5335 = CARTESIAN_POINT('',(2.5,0.875,0.2));
+#5336 = VECTOR('',#5337,1.);
+#5337 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5338 = ORIENTED_EDGE('',*,*,#3522,.F.);
+#5339 = ORIENTED_EDGE('',*,*,#2962,.T.);
+#5340 = PLANE('',#5341);
+#5341 = AXIS2_PLACEMENT_3D('',#5342,#5343,#5344);
+#5342 = CARTESIAN_POINT('',(2.5,1.125,0.2));
+#5343 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5344 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5345 = ADVANCED_FACE('',(#5346),#5357,.F.);
+#5346 = FACE_BOUND('',#5347,.F.);
+#5347 = EDGE_LOOP('',(#5348,#5349,#5355,#5356));
+#5348 = ORIENTED_EDGE('',*,*,#4183,.F.);
+#5349 = ORIENTED_EDGE('',*,*,#5350,.F.);
+#5350 = EDGE_CURVE('',#4307,#4176,#5351,.T.);
+#5351 = LINE('',#5352,#5353);
+#5352 = CARTESIAN_POINT('',(2.5,-1.125,0.2));
+#5353 = VECTOR('',#5354,1.);
+#5354 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5355 = ORIENTED_EDGE('',*,*,#4306,.F.);
+#5356 = ORIENTED_EDGE('',*,*,#2870,.T.);
+#5357 = PLANE('',#5358);
+#5358 = AXIS2_PLACEMENT_3D('',#5359,#5360,#5361);
+#5359 = CARTESIAN_POINT('',(2.5,-0.875,0.2));
+#5360 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5361 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5362 = ADVANCED_FACE('',(#5363),#5374,.F.);
+#5363 = FACE_BOUND('',#5364,.F.);
+#5364 = EDGE_LOOP('',(#5365,#5366,#5372,#5373));
+#5365 = ORIENTED_EDGE('',*,*,#3595,.F.);
+#5366 = ORIENTED_EDGE('',*,*,#5367,.F.);
+#5367 = EDGE_CURVE('',#3719,#3588,#5368,.T.);
+#5368 = LINE('',#5369,#5370);
+#5369 = CARTESIAN_POINT('',(2.5,0.375,0.2));
+#5370 = VECTOR('',#5371,1.);
+#5371 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5372 = ORIENTED_EDGE('',*,*,#3718,.F.);
+#5373 = ORIENTED_EDGE('',*,*,#2939,.T.);
+#5374 = PLANE('',#5375);
+#5375 = AXIS2_PLACEMENT_3D('',#5376,#5377,#5378);
+#5376 = CARTESIAN_POINT('',(2.5,0.625,0.2));
+#5377 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5378 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5379 = ADVANCED_FACE('',(#5380),#5391,.F.);
+#5380 = FACE_BOUND('',#5381,.F.);
+#5381 = EDGE_LOOP('',(#5382,#5383,#5389,#5390));
+#5382 = ORIENTED_EDGE('',*,*,#3987,.F.);
+#5383 = ORIENTED_EDGE('',*,*,#5384,.F.);
+#5384 = EDGE_CURVE('',#4111,#3980,#5385,.T.);
+#5385 = LINE('',#5386,#5387);
+#5386 = CARTESIAN_POINT('',(2.5,-0.625,0.2));
+#5387 = VECTOR('',#5388,1.);
+#5388 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5389 = ORIENTED_EDGE('',*,*,#4110,.F.);
+#5390 = ORIENTED_EDGE('',*,*,#2893,.T.);
+#5391 = PLANE('',#5392);
+#5392 = AXIS2_PLACEMENT_3D('',#5393,#5394,#5395);
+#5393 = CARTESIAN_POINT('',(2.5,-0.375,0.2));
+#5394 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5395 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5396 = ADVANCED_FACE('',(#5397),#5408,.F.);
+#5397 = FACE_BOUND('',#5398,.F.);
+#5398 = EDGE_LOOP('',(#5399,#5400,#5406,#5407));
+#5399 = ORIENTED_EDGE('',*,*,#3791,.F.);
+#5400 = ORIENTED_EDGE('',*,*,#5401,.F.);
+#5401 = EDGE_CURVE('',#3915,#3784,#5402,.T.);
+#5402 = LINE('',#5403,#5404);
+#5403 = CARTESIAN_POINT('',(2.5,-0.125,0.2));
+#5404 = VECTOR('',#5405,1.);
+#5405 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5406 = ORIENTED_EDGE('',*,*,#3914,.F.);
+#5407 = ORIENTED_EDGE('',*,*,#2916,.T.);
+#5408 = PLANE('',#5409);
+#5409 = AXIS2_PLACEMENT_3D('',#5410,#5411,#5412);
+#5410 = CARTESIAN_POINT('',(2.5,0.125,0.2));
+#5411 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5412 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5413 = ADVANCED_FACE('',(#5414),#5425,.F.);
+#5414 = FACE_BOUND('',#5415,.F.);
+#5415 = EDGE_LOOP('',(#5416,#5417,#5423,#5424));
+#5416 = ORIENTED_EDGE('',*,*,#4540,.F.);
+#5417 = ORIENTED_EDGE('',*,*,#5418,.F.);
+#5418 = EDGE_CURVE('',#4420,#4533,#5419,.T.);
+#5419 = LINE('',#5420,#5421);
+#5420 = CARTESIAN_POINT('',(1.375,-2.5,0.2));
+#5421 = VECTOR('',#5422,1.);
+#5422 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5423 = ORIENTED_EDGE('',*,*,#4419,.F.);
+#5424 = ORIENTED_EDGE('',*,*,#3161,.T.);
+#5425 = PLANE('',#5426);
+#5426 = AXIS2_PLACEMENT_3D('',#5427,#5428,#5429);
+#5427 = CARTESIAN_POINT('',(1.625,-2.5,0.2));
+#5428 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5429 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5430 = ADVANCED_FACE('',(#5431),#5442,.F.);
+#5431 = FACE_BOUND('',#5432,.F.);
+#5432 = EDGE_LOOP('',(#5433,#5434,#5440,#5441));
+#5433 = ORIENTED_EDGE('',*,*,#3364,.F.);
+#5434 = ORIENTED_EDGE('',*,*,#5435,.F.);
+#5435 = EDGE_CURVE('',#3244,#3357,#5436,.T.);
+#5436 = LINE('',#5437,#5438);
+#5437 = CARTESIAN_POINT('',(-1.625,-2.5,0.2));
+#5438 = VECTOR('',#5439,1.);
+#5439 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5440 = ORIENTED_EDGE('',*,*,#3243,.F.);
+#5441 = ORIENTED_EDGE('',*,*,#3023,.T.);
+#5442 = PLANE('',#5443);
+#5443 = AXIS2_PLACEMENT_3D('',#5444,#5445,#5446);
+#5444 = CARTESIAN_POINT('',(-1.375,-2.5,0.2));
+#5445 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5446 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5447 = ADVANCED_FACE('',(#5448),#5459,.F.);
+#5448 = FACE_BOUND('',#5449,.F.);
+#5449 = EDGE_LOOP('',(#5450,#5451,#5457,#5458));
+#5450 = ORIENTED_EDGE('',*,*,#4344,.F.);
+#5451 = ORIENTED_EDGE('',*,*,#5452,.F.);
+#5452 = EDGE_CURVE('',#4224,#4337,#5453,.T.);
+#5453 = LINE('',#5454,#5455);
+#5454 = CARTESIAN_POINT('',(0.875,-2.5,0.2));
+#5455 = VECTOR('',#5456,1.);
+#5456 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5457 = ORIENTED_EDGE('',*,*,#4223,.F.);
+#5458 = ORIENTED_EDGE('',*,*,#3138,.T.);
+#5459 = PLANE('',#5460);
+#5460 = AXIS2_PLACEMENT_3D('',#5461,#5462,#5463);
+#5461 = CARTESIAN_POINT('',(1.125,-2.5,0.2));
+#5462 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5463 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5464 = ADVANCED_FACE('',(#5465),#5476,.F.);
+#5465 = FACE_BOUND('',#5466,.F.);
+#5466 = EDGE_LOOP('',(#5467,#5468,#5474,#5475));
+#5467 = ORIENTED_EDGE('',*,*,#3560,.F.);
+#5468 = ORIENTED_EDGE('',*,*,#5469,.F.);
+#5469 = EDGE_CURVE('',#3440,#3553,#5470,.T.);
+#5470 = LINE('',#5471,#5472);
+#5471 = CARTESIAN_POINT('',(-1.125,-2.5,0.2));
+#5472 = VECTOR('',#5473,1.);
+#5473 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5474 = ORIENTED_EDGE('',*,*,#3439,.F.);
+#5475 = ORIENTED_EDGE('',*,*,#3046,.T.);
+#5476 = PLANE('',#5477);
+#5477 = AXIS2_PLACEMENT_3D('',#5478,#5479,#5480);
+#5478 = CARTESIAN_POINT('',(-0.875,-2.5,0.2));
+#5479 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5480 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5481 = ADVANCED_FACE('',(#5482),#5493,.F.);
+#5482 = FACE_BOUND('',#5483,.F.);
+#5483 = EDGE_LOOP('',(#5484,#5485,#5491,#5492));
+#5484 = ORIENTED_EDGE('',*,*,#4148,.F.);
+#5485 = ORIENTED_EDGE('',*,*,#5486,.F.);
+#5486 = EDGE_CURVE('',#4028,#4141,#5487,.T.);
+#5487 = LINE('',#5488,#5489);
+#5488 = CARTESIAN_POINT('',(0.375,-2.5,0.2));
+#5489 = VECTOR('',#5490,1.);
+#5490 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5491 = ORIENTED_EDGE('',*,*,#4027,.F.);
+#5492 = ORIENTED_EDGE('',*,*,#3115,.T.);
+#5493 = PLANE('',#5494);
+#5494 = AXIS2_PLACEMENT_3D('',#5495,#5496,#5497);
+#5495 = CARTESIAN_POINT('',(0.625,-2.5,0.2));
+#5496 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5497 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5498 = ADVANCED_FACE('',(#5499),#5510,.F.);
+#5499 = FACE_BOUND('',#5500,.F.);
+#5500 = EDGE_LOOP('',(#5501,#5502,#5508,#5509));
+#5501 = ORIENTED_EDGE('',*,*,#3756,.F.);
+#5502 = ORIENTED_EDGE('',*,*,#5503,.F.);
+#5503 = EDGE_CURVE('',#3636,#3749,#5504,.T.);
+#5504 = LINE('',#5505,#5506);
+#5505 = CARTESIAN_POINT('',(-0.625,-2.5,0.2));
+#5506 = VECTOR('',#5507,1.);
+#5507 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5508 = ORIENTED_EDGE('',*,*,#3635,.F.);
+#5509 = ORIENTED_EDGE('',*,*,#3069,.T.);
+#5510 = PLANE('',#5511);
+#5511 = AXIS2_PLACEMENT_3D('',#5512,#5513,#5514);
+#5512 = CARTESIAN_POINT('',(-0.375,-2.5,0.2));
+#5513 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5514 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5515 = ADVANCED_FACE('',(#5516),#5527,.F.);
+#5516 = FACE_BOUND('',#5517,.F.);
+#5517 = EDGE_LOOP('',(#5518,#5519,#5525,#5526));
+#5518 = ORIENTED_EDGE('',*,*,#3952,.F.);
+#5519 = ORIENTED_EDGE('',*,*,#5520,.F.);
+#5520 = EDGE_CURVE('',#3832,#3945,#5521,.T.);
+#5521 = LINE('',#5522,#5523);
+#5522 = CARTESIAN_POINT('',(-0.125,-2.5,0.2));
+#5523 = VECTOR('',#5524,1.);
+#5524 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5525 = ORIENTED_EDGE('',*,*,#3831,.F.);
+#5526 = ORIENTED_EDGE('',*,*,#3092,.T.);
+#5527 = PLANE('',#5528);
+#5528 = AXIS2_PLACEMENT_3D('',#5529,#5530,#5531);
+#5529 = CARTESIAN_POINT('',(0.125,-2.5,0.2));
+#5530 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5531 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5532 = ADVANCED_FACE('',(#5533),#5544,.T.);
+#5533 = FACE_BOUND('',#5534,.F.);
+#5534 = EDGE_LOOP('',(#5535,#5536,#5537,#5538));
+#5535 = ORIENTED_EDGE('',*,*,#3185,.T.);
+#5536 = ORIENTED_EDGE('',*,*,#3265,.T.);
+#5537 = ORIENTED_EDGE('',*,*,#3315,.T.);
+#5538 = ORIENTED_EDGE('',*,*,#5539,.T.);
+#5539 = EDGE_CURVE('',#3316,#3186,#5540,.T.);
+#5540 = LINE('',#5541,#5542);
+#5541 = CARTESIAN_POINT('',(2.5,1.375,0.E+000));
+#5542 = VECTOR('',#5543,1.);
+#5543 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5544 = PLANE('',#5545);
+#5545 = AXIS2_PLACEMENT_3D('',#5546,#5547,#5548);
+#5546 = CARTESIAN_POINT('',(2.5,1.625,0.E+000));
+#5547 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5548 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5549 = ADVANCED_FACE('',(#5550),#5556,.F.);
+#5550 = FACE_BOUND('',#5551,.F.);
+#5551 = EDGE_LOOP('',(#5552,#5553,#5554,#5555));
+#5552 = ORIENTED_EDGE('',*,*,#3334,.T.);
+#5553 = ORIENTED_EDGE('',*,*,#5299,.T.);
+#5554 = ORIENTED_EDGE('',*,*,#3195,.F.);
+#5555 = ORIENTED_EDGE('',*,*,#5539,.F.);
+#5556 = PLANE('',#5557);
+#5557 = AXIS2_PLACEMENT_3D('',#5558,#5559,#5560);
+#5558 = CARTESIAN_POINT('',(2.5,1.375,0.E+000));
+#5559 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5560 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5561 = ADVANCED_FACE('',(#5562),#5573,.T.);
+#5562 = FACE_BOUND('',#5563,.F.);
+#5563 = EDGE_LOOP('',(#5564,#5565,#5566,#5567));
+#5564 = ORIENTED_EDGE('',*,*,#3348,.T.);
+#5565 = ORIENTED_EDGE('',*,*,#3290,.T.);
+#5566 = ORIENTED_EDGE('',*,*,#3225,.T.);
+#5567 = ORIENTED_EDGE('',*,*,#5568,.T.);
+#5568 = EDGE_CURVE('',#3228,#3349,#5569,.T.);
+#5569 = LINE('',#5570,#5571);
+#5570 = CARTESIAN_POINT('',(-1.625,-2.5,0.E+000));
+#5571 = VECTOR('',#5572,1.);
+#5572 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5573 = PLANE('',#5574);
+#5574 = AXIS2_PLACEMENT_3D('',#5575,#5576,#5577);
+#5575 = CARTESIAN_POINT('',(-1.375,-2.5,0.E+000));
+#5576 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5577 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5578 = ADVANCED_FACE('',(#5579),#5585,.F.);
+#5579 = FACE_BOUND('',#5580,.F.);
+#5580 = EDGE_LOOP('',(#5581,#5582,#5583,#5584));
+#5581 = ORIENTED_EDGE('',*,*,#3251,.T.);
+#5582 = ORIENTED_EDGE('',*,*,#5435,.T.);
+#5583 = ORIENTED_EDGE('',*,*,#3356,.F.);
+#5584 = ORIENTED_EDGE('',*,*,#5568,.F.);
+#5585 = PLANE('',#5586);
+#5586 = AXIS2_PLACEMENT_3D('',#5587,#5588,#5589);
+#5587 = CARTESIAN_POINT('',(-1.625,-2.5,0.E+000));
+#5588 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5589 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5590 = ADVANCED_FACE('',(#5591),#5602,.T.);
+#5591 = FACE_BOUND('',#5592,.F.);
+#5592 = EDGE_LOOP('',(#5593,#5594,#5595,#5596));
+#5593 = ORIENTED_EDGE('',*,*,#3381,.T.);
+#5594 = ORIENTED_EDGE('',*,*,#3461,.T.);
+#5595 = ORIENTED_EDGE('',*,*,#3511,.T.);
+#5596 = ORIENTED_EDGE('',*,*,#5597,.T.);
+#5597 = EDGE_CURVE('',#3512,#3382,#5598,.T.);
+#5598 = LINE('',#5599,#5600);
+#5599 = CARTESIAN_POINT('',(2.5,0.875,0.E+000));
+#5600 = VECTOR('',#5601,1.);
+#5601 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5602 = PLANE('',#5603);
+#5603 = AXIS2_PLACEMENT_3D('',#5604,#5605,#5606);
+#5604 = CARTESIAN_POINT('',(2.5,1.125,0.E+000));
+#5605 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5606 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5607 = ADVANCED_FACE('',(#5608),#5614,.F.);
+#5608 = FACE_BOUND('',#5609,.F.);
+#5609 = EDGE_LOOP('',(#5610,#5611,#5612,#5613));
+#5610 = ORIENTED_EDGE('',*,*,#3530,.T.);
+#5611 = ORIENTED_EDGE('',*,*,#5333,.T.);
+#5612 = ORIENTED_EDGE('',*,*,#3391,.F.);
+#5613 = ORIENTED_EDGE('',*,*,#5597,.F.);
+#5614 = PLANE('',#5615);
+#5615 = AXIS2_PLACEMENT_3D('',#5616,#5617,#5618);
+#5616 = CARTESIAN_POINT('',(2.5,0.875,0.E+000));
+#5617 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5618 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5619 = ADVANCED_FACE('',(#5620),#5631,.T.);
+#5620 = FACE_BOUND('',#5621,.F.);
+#5621 = EDGE_LOOP('',(#5622,#5623,#5624,#5625));
+#5622 = ORIENTED_EDGE('',*,*,#3544,.T.);
+#5623 = ORIENTED_EDGE('',*,*,#3486,.T.);
+#5624 = ORIENTED_EDGE('',*,*,#3421,.T.);
+#5625 = ORIENTED_EDGE('',*,*,#5626,.T.);
+#5626 = EDGE_CURVE('',#3424,#3545,#5627,.T.);
+#5627 = LINE('',#5628,#5629);
+#5628 = CARTESIAN_POINT('',(-1.125,-2.5,0.E+000));
+#5629 = VECTOR('',#5630,1.);
+#5630 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5631 = PLANE('',#5632);
+#5632 = AXIS2_PLACEMENT_3D('',#5633,#5634,#5635);
+#5633 = CARTESIAN_POINT('',(-0.875,-2.5,0.E+000));
+#5634 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5635 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5636 = ADVANCED_FACE('',(#5637),#5643,.F.);
+#5637 = FACE_BOUND('',#5638,.F.);
+#5638 = EDGE_LOOP('',(#5639,#5640,#5641,#5642));
+#5639 = ORIENTED_EDGE('',*,*,#3447,.T.);
+#5640 = ORIENTED_EDGE('',*,*,#5469,.T.);
+#5641 = ORIENTED_EDGE('',*,*,#3552,.F.);
+#5642 = ORIENTED_EDGE('',*,*,#5626,.F.);
+#5643 = PLANE('',#5644);
+#5644 = AXIS2_PLACEMENT_3D('',#5645,#5646,#5647);
+#5645 = CARTESIAN_POINT('',(-1.125,-2.5,0.E+000));
+#5646 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5647 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5648 = ADVANCED_FACE('',(#5649),#5660,.T.);
+#5649 = FACE_BOUND('',#5650,.F.);
+#5650 = EDGE_LOOP('',(#5651,#5652,#5653,#5654));
+#5651 = ORIENTED_EDGE('',*,*,#3577,.T.);
+#5652 = ORIENTED_EDGE('',*,*,#3657,.T.);
+#5653 = ORIENTED_EDGE('',*,*,#3707,.T.);
+#5654 = ORIENTED_EDGE('',*,*,#5655,.T.);
+#5655 = EDGE_CURVE('',#3708,#3578,#5656,.T.);
+#5656 = LINE('',#5657,#5658);
+#5657 = CARTESIAN_POINT('',(2.5,0.375,0.E+000));
+#5658 = VECTOR('',#5659,1.);
+#5659 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5660 = PLANE('',#5661);
+#5661 = AXIS2_PLACEMENT_3D('',#5662,#5663,#5664);
+#5662 = CARTESIAN_POINT('',(2.5,0.625,0.E+000));
+#5663 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5664 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5665 = ADVANCED_FACE('',(#5666),#5672,.F.);
+#5666 = FACE_BOUND('',#5667,.F.);
+#5667 = EDGE_LOOP('',(#5668,#5669,#5670,#5671));
+#5668 = ORIENTED_EDGE('',*,*,#3726,.T.);
+#5669 = ORIENTED_EDGE('',*,*,#5367,.T.);
+#5670 = ORIENTED_EDGE('',*,*,#3587,.F.);
+#5671 = ORIENTED_EDGE('',*,*,#5655,.F.);
+#5672 = PLANE('',#5673);
+#5673 = AXIS2_PLACEMENT_3D('',#5674,#5675,#5676);
+#5674 = CARTESIAN_POINT('',(2.5,0.375,0.E+000));
+#5675 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5676 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5677 = ADVANCED_FACE('',(#5678),#5689,.T.);
+#5678 = FACE_BOUND('',#5679,.F.);
+#5679 = EDGE_LOOP('',(#5680,#5681,#5682,#5683));
+#5680 = ORIENTED_EDGE('',*,*,#3740,.T.);
+#5681 = ORIENTED_EDGE('',*,*,#3682,.T.);
+#5682 = ORIENTED_EDGE('',*,*,#3617,.T.);
+#5683 = ORIENTED_EDGE('',*,*,#5684,.T.);
+#5684 = EDGE_CURVE('',#3620,#3741,#5685,.T.);
+#5685 = LINE('',#5686,#5687);
+#5686 = CARTESIAN_POINT('',(-0.625,-2.5,0.E+000));
+#5687 = VECTOR('',#5688,1.);
+#5688 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5689 = PLANE('',#5690);
+#5690 = AXIS2_PLACEMENT_3D('',#5691,#5692,#5693);
+#5691 = CARTESIAN_POINT('',(-0.375,-2.5,0.E+000));
+#5692 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5693 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5694 = ADVANCED_FACE('',(#5695),#5701,.F.);
+#5695 = FACE_BOUND('',#5696,.F.);
+#5696 = EDGE_LOOP('',(#5697,#5698,#5699,#5700));
+#5697 = ORIENTED_EDGE('',*,*,#3643,.T.);
+#5698 = ORIENTED_EDGE('',*,*,#5503,.T.);
+#5699 = ORIENTED_EDGE('',*,*,#3748,.F.);
+#5700 = ORIENTED_EDGE('',*,*,#5684,.F.);
+#5701 = PLANE('',#5702);
+#5702 = AXIS2_PLACEMENT_3D('',#5703,#5704,#5705);
+#5703 = CARTESIAN_POINT('',(-0.625,-2.5,0.E+000));
+#5704 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5705 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5706 = ADVANCED_FACE('',(#5707),#5718,.T.);
+#5707 = FACE_BOUND('',#5708,.F.);
+#5708 = EDGE_LOOP('',(#5709,#5710,#5711,#5712));
+#5709 = ORIENTED_EDGE('',*,*,#3773,.T.);
+#5710 = ORIENTED_EDGE('',*,*,#3853,.T.);
+#5711 = ORIENTED_EDGE('',*,*,#3903,.T.);
+#5712 = ORIENTED_EDGE('',*,*,#5713,.T.);
+#5713 = EDGE_CURVE('',#3904,#3774,#5714,.T.);
+#5714 = LINE('',#5715,#5716);
+#5715 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000));
+#5716 = VECTOR('',#5717,1.);
+#5717 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5718 = PLANE('',#5719);
+#5719 = AXIS2_PLACEMENT_3D('',#5720,#5721,#5722);
+#5720 = CARTESIAN_POINT('',(2.5,0.125,0.E+000));
+#5721 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5722 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5723 = ADVANCED_FACE('',(#5724),#5730,.F.);
+#5724 = FACE_BOUND('',#5725,.F.);
+#5725 = EDGE_LOOP('',(#5726,#5727,#5728,#5729));
+#5726 = ORIENTED_EDGE('',*,*,#3922,.T.);
+#5727 = ORIENTED_EDGE('',*,*,#5401,.T.);
+#5728 = ORIENTED_EDGE('',*,*,#3783,.F.);
+#5729 = ORIENTED_EDGE('',*,*,#5713,.F.);
+#5730 = PLANE('',#5731);
+#5731 = AXIS2_PLACEMENT_3D('',#5732,#5733,#5734);
+#5732 = CARTESIAN_POINT('',(2.5,-0.125,0.E+000));
+#5733 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5734 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5735 = ADVANCED_FACE('',(#5736),#5747,.T.);
+#5736 = FACE_BOUND('',#5737,.F.);
+#5737 = EDGE_LOOP('',(#5738,#5739,#5740,#5741));
+#5738 = ORIENTED_EDGE('',*,*,#3936,.T.);
+#5739 = ORIENTED_EDGE('',*,*,#3878,.T.);
+#5740 = ORIENTED_EDGE('',*,*,#3813,.T.);
+#5741 = ORIENTED_EDGE('',*,*,#5742,.T.);
+#5742 = EDGE_CURVE('',#3816,#3937,#5743,.T.);
+#5743 = LINE('',#5744,#5745);
+#5744 = CARTESIAN_POINT('',(-0.125,-2.5,0.E+000));
+#5745 = VECTOR('',#5746,1.);
+#5746 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5747 = PLANE('',#5748);
+#5748 = AXIS2_PLACEMENT_3D('',#5749,#5750,#5751);
+#5749 = CARTESIAN_POINT('',(0.125,-2.5,0.E+000));
+#5750 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5751 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5752 = ADVANCED_FACE('',(#5753),#5759,.F.);
+#5753 = FACE_BOUND('',#5754,.F.);
+#5754 = EDGE_LOOP('',(#5755,#5756,#5757,#5758));
+#5755 = ORIENTED_EDGE('',*,*,#3839,.T.);
+#5756 = ORIENTED_EDGE('',*,*,#5520,.T.);
+#5757 = ORIENTED_EDGE('',*,*,#3944,.F.);
+#5758 = ORIENTED_EDGE('',*,*,#5742,.F.);
+#5759 = PLANE('',#5760);
+#5760 = AXIS2_PLACEMENT_3D('',#5761,#5762,#5763);
+#5761 = CARTESIAN_POINT('',(-0.125,-2.5,0.E+000));
+#5762 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5763 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5764 = ADVANCED_FACE('',(#5765),#5776,.T.);
+#5765 = FACE_BOUND('',#5766,.F.);
+#5766 = EDGE_LOOP('',(#5767,#5768,#5769,#5770));
+#5767 = ORIENTED_EDGE('',*,*,#3969,.T.);
+#5768 = ORIENTED_EDGE('',*,*,#4049,.T.);
+#5769 = ORIENTED_EDGE('',*,*,#4099,.T.);
+#5770 = ORIENTED_EDGE('',*,*,#5771,.T.);
+#5771 = EDGE_CURVE('',#4100,#3970,#5772,.T.);
+#5772 = LINE('',#5773,#5774);
+#5773 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000));
+#5774 = VECTOR('',#5775,1.);
+#5775 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5776 = PLANE('',#5777);
+#5777 = AXIS2_PLACEMENT_3D('',#5778,#5779,#5780);
+#5778 = CARTESIAN_POINT('',(2.5,-0.375,0.E+000));
+#5779 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5780 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5781 = ADVANCED_FACE('',(#5782),#5788,.F.);
+#5782 = FACE_BOUND('',#5783,.F.);
+#5783 = EDGE_LOOP('',(#5784,#5785,#5786,#5787));
+#5784 = ORIENTED_EDGE('',*,*,#4118,.T.);
+#5785 = ORIENTED_EDGE('',*,*,#5384,.T.);
+#5786 = ORIENTED_EDGE('',*,*,#3979,.F.);
+#5787 = ORIENTED_EDGE('',*,*,#5771,.F.);
+#5788 = PLANE('',#5789);
+#5789 = AXIS2_PLACEMENT_3D('',#5790,#5791,#5792);
+#5790 = CARTESIAN_POINT('',(2.5,-0.625,0.E+000));
+#5791 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5792 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5793 = ADVANCED_FACE('',(#5794),#5805,.T.);
+#5794 = FACE_BOUND('',#5795,.F.);
+#5795 = EDGE_LOOP('',(#5796,#5797,#5798,#5799));
+#5796 = ORIENTED_EDGE('',*,*,#4132,.T.);
+#5797 = ORIENTED_EDGE('',*,*,#4074,.T.);
+#5798 = ORIENTED_EDGE('',*,*,#4009,.T.);
+#5799 = ORIENTED_EDGE('',*,*,#5800,.T.);
+#5800 = EDGE_CURVE('',#4012,#4133,#5801,.T.);
+#5801 = LINE('',#5802,#5803);
+#5802 = CARTESIAN_POINT('',(0.375,-2.5,0.E+000));
+#5803 = VECTOR('',#5804,1.);
+#5804 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5805 = PLANE('',#5806);
+#5806 = AXIS2_PLACEMENT_3D('',#5807,#5808,#5809);
+#5807 = CARTESIAN_POINT('',(0.625,-2.5,0.E+000));
+#5808 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5809 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5810 = ADVANCED_FACE('',(#5811),#5817,.F.);
+#5811 = FACE_BOUND('',#5812,.F.);
+#5812 = EDGE_LOOP('',(#5813,#5814,#5815,#5816));
+#5813 = ORIENTED_EDGE('',*,*,#4035,.T.);
+#5814 = ORIENTED_EDGE('',*,*,#5486,.T.);
+#5815 = ORIENTED_EDGE('',*,*,#4140,.F.);
+#5816 = ORIENTED_EDGE('',*,*,#5800,.F.);
+#5817 = PLANE('',#5818);
+#5818 = AXIS2_PLACEMENT_3D('',#5819,#5820,#5821);
+#5819 = CARTESIAN_POINT('',(0.375,-2.5,0.E+000));
+#5820 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5821 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5822 = ADVANCED_FACE('',(#5823),#5834,.T.);
+#5823 = FACE_BOUND('',#5824,.F.);
+#5824 = EDGE_LOOP('',(#5825,#5826,#5827,#5828));
+#5825 = ORIENTED_EDGE('',*,*,#4165,.T.);
+#5826 = ORIENTED_EDGE('',*,*,#4245,.T.);
+#5827 = ORIENTED_EDGE('',*,*,#4295,.T.);
+#5828 = ORIENTED_EDGE('',*,*,#5829,.T.);
+#5829 = EDGE_CURVE('',#4296,#4166,#5830,.T.);
+#5830 = LINE('',#5831,#5832);
+#5831 = CARTESIAN_POINT('',(2.5,-1.125,0.E+000));
+#5832 = VECTOR('',#5833,1.);
+#5833 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5834 = PLANE('',#5835);
+#5835 = AXIS2_PLACEMENT_3D('',#5836,#5837,#5838);
+#5836 = CARTESIAN_POINT('',(2.5,-0.875,0.E+000));
+#5837 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5838 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5839 = ADVANCED_FACE('',(#5840),#5846,.F.);
+#5840 = FACE_BOUND('',#5841,.F.);
+#5841 = EDGE_LOOP('',(#5842,#5843,#5844,#5845));
+#5842 = ORIENTED_EDGE('',*,*,#4314,.T.);
+#5843 = ORIENTED_EDGE('',*,*,#5350,.T.);
+#5844 = ORIENTED_EDGE('',*,*,#4175,.F.);
+#5845 = ORIENTED_EDGE('',*,*,#5829,.F.);
+#5846 = PLANE('',#5847);
+#5847 = AXIS2_PLACEMENT_3D('',#5848,#5849,#5850);
+#5848 = CARTESIAN_POINT('',(2.5,-1.125,0.E+000));
+#5849 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5850 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5851 = ADVANCED_FACE('',(#5852),#5863,.T.);
+#5852 = FACE_BOUND('',#5853,.F.);
+#5853 = EDGE_LOOP('',(#5854,#5855,#5856,#5857));
+#5854 = ORIENTED_EDGE('',*,*,#4328,.T.);
+#5855 = ORIENTED_EDGE('',*,*,#4270,.T.);
+#5856 = ORIENTED_EDGE('',*,*,#4205,.T.);
+#5857 = ORIENTED_EDGE('',*,*,#5858,.T.);
+#5858 = EDGE_CURVE('',#4208,#4329,#5859,.T.);
+#5859 = LINE('',#5860,#5861);
+#5860 = CARTESIAN_POINT('',(0.875,-2.5,0.E+000));
+#5861 = VECTOR('',#5862,1.);
+#5862 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5863 = PLANE('',#5864);
+#5864 = AXIS2_PLACEMENT_3D('',#5865,#5866,#5867);
+#5865 = CARTESIAN_POINT('',(1.125,-2.5,0.E+000));
+#5866 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5867 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5868 = ADVANCED_FACE('',(#5869),#5875,.F.);
+#5869 = FACE_BOUND('',#5870,.F.);
+#5870 = EDGE_LOOP('',(#5871,#5872,#5873,#5874));
+#5871 = ORIENTED_EDGE('',*,*,#4231,.T.);
+#5872 = ORIENTED_EDGE('',*,*,#5452,.T.);
+#5873 = ORIENTED_EDGE('',*,*,#4336,.F.);
+#5874 = ORIENTED_EDGE('',*,*,#5858,.F.);
+#5875 = PLANE('',#5876);
+#5876 = AXIS2_PLACEMENT_3D('',#5877,#5878,#5879);
+#5877 = CARTESIAN_POINT('',(0.875,-2.5,0.E+000));
+#5878 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5879 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5880 = ADVANCED_FACE('',(#5881),#5892,.T.);
+#5881 = FACE_BOUND('',#5882,.F.);
+#5882 = EDGE_LOOP('',(#5883,#5884,#5885,#5886));
+#5883 = ORIENTED_EDGE('',*,*,#4361,.T.);
+#5884 = ORIENTED_EDGE('',*,*,#4441,.T.);
+#5885 = ORIENTED_EDGE('',*,*,#4491,.T.);
+#5886 = ORIENTED_EDGE('',*,*,#5887,.T.);
+#5887 = EDGE_CURVE('',#4492,#4362,#5888,.T.);
+#5888 = LINE('',#5889,#5890);
+#5889 = CARTESIAN_POINT('',(2.5,-1.625,0.E+000));
+#5890 = VECTOR('',#5891,1.);
+#5891 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5892 = PLANE('',#5893);
+#5893 = AXIS2_PLACEMENT_3D('',#5894,#5895,#5896);
+#5894 = CARTESIAN_POINT('',(2.5,-1.375,0.E+000));
+#5895 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5896 = DIRECTION('',(-3.445092848398E-016,-1.,0.E+000));
+#5897 = ADVANCED_FACE('',(#5898),#5904,.F.);
+#5898 = FACE_BOUND('',#5899,.F.);
+#5899 = EDGE_LOOP('',(#5900,#5901,#5902,#5903));
+#5900 = ORIENTED_EDGE('',*,*,#4510,.T.);
+#5901 = ORIENTED_EDGE('',*,*,#5316,.T.);
+#5902 = ORIENTED_EDGE('',*,*,#4371,.F.);
+#5903 = ORIENTED_EDGE('',*,*,#5887,.F.);
+#5904 = PLANE('',#5905);
+#5905 = AXIS2_PLACEMENT_3D('',#5906,#5907,#5908);
+#5906 = CARTESIAN_POINT('',(2.5,-1.625,0.E+000));
+#5907 = DIRECTION('',(-1.,3.445092848398E-016,0.E+000));
+#5908 = DIRECTION('',(3.445092848398E-016,1.,0.E+000));
+#5909 = ADVANCED_FACE('',(#5910),#5921,.T.);
+#5910 = FACE_BOUND('',#5911,.F.);
+#5911 = EDGE_LOOP('',(#5912,#5913,#5914,#5915));
+#5912 = ORIENTED_EDGE('',*,*,#4524,.T.);
+#5913 = ORIENTED_EDGE('',*,*,#4466,.T.);
+#5914 = ORIENTED_EDGE('',*,*,#4401,.T.);
+#5915 = ORIENTED_EDGE('',*,*,#5916,.T.);
+#5916 = EDGE_CURVE('',#4404,#4525,#5917,.T.);
+#5917 = LINE('',#5918,#5919);
+#5918 = CARTESIAN_POINT('',(1.375,-2.5,0.E+000));
+#5919 = VECTOR('',#5920,1.);
+#5920 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5921 = PLANE('',#5922);
+#5922 = AXIS2_PLACEMENT_3D('',#5923,#5924,#5925);
+#5923 = CARTESIAN_POINT('',(1.625,-2.5,0.E+000));
+#5924 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5925 = DIRECTION('',(-1.,5.665538897648E-016,0.E+000));
+#5926 = ADVANCED_FACE('',(#5927),#5933,.F.);
+#5927 = FACE_BOUND('',#5928,.F.);
+#5928 = EDGE_LOOP('',(#5929,#5930,#5931,#5932));
+#5929 = ORIENTED_EDGE('',*,*,#4427,.T.);
+#5930 = ORIENTED_EDGE('',*,*,#5418,.T.);
+#5931 = ORIENTED_EDGE('',*,*,#4532,.F.);
+#5932 = ORIENTED_EDGE('',*,*,#5916,.F.);
+#5933 = PLANE('',#5934);
+#5934 = AXIS2_PLACEMENT_3D('',#5935,#5936,#5937);
+#5935 = CARTESIAN_POINT('',(1.375,-2.5,0.E+000));
+#5936 = DIRECTION('',(5.665538897648E-016,1.,0.E+000));
+#5937 = DIRECTION('',(1.,-5.665538897648E-016,0.E+000));
+#5938 = ADVANCED_FACE('',(#5939),#5946,.T.);
+#5939 = FACE_BOUND('',#5940,.F.);
+#5940 = EDGE_LOOP('',(#5941,#5942,#5943,#5944,#5945));
+#5941 = ORIENTED_EDGE('',*,*,#4574,.T.);
+#5942 = ORIENTED_EDGE('',*,*,#4598,.T.);
+#5943 = ORIENTED_EDGE('',*,*,#4622,.T.);
+#5944 = ORIENTED_EDGE('',*,*,#4646,.T.);
+#5945 = ORIENTED_EDGE('',*,*,#4663,.T.);
+#5946 = PLANE('',#5947);
+#5947 = AXIS2_PLACEMENT_3D('',#5948,#5949,#5950);
+#5948 = CARTESIAN_POINT('',(-1.575,1.375,0.E+000));
+#5949 = DIRECTION('',(0.E+000,-0.E+000,-1.));
+#5950 = DIRECTION('',(2.22044604925E-016,1.,0.E+000));
+#5951 = ADVANCED_FACE('',(#5952),#5971,.F.);
+#5952 = FACE_BOUND('',#5953,.T.);
+#5953 = EDGE_LOOP('',(#5954,#5955,#5963,#5970));
+#5954 = ORIENTED_EDGE('',*,*,#4683,.F.);
+#5955 = ORIENTED_EDGE('',*,*,#5956,.T.);
+#5956 = EDGE_CURVE('',#4684,#5957,#5959,.T.);
+#5957 = VERTEX_POINT('',#5958);
+#5958 = CARTESIAN_POINT('',(-1.9,1.65,0.91));
+#5959 = LINE('',#5960,#5961);
+#5960 = CARTESIAN_POINT('',(-1.9,1.65,0.93));
+#5961 = VECTOR('',#5962,1.);
+#5962 = DIRECTION('',(-0.E+000,0.E+000,-1.));
+#5963 = ORIENTED_EDGE('',*,*,#5964,.F.);
+#5964 = EDGE_CURVE('',#5957,#5957,#5965,.T.);
+#5965 = CIRCLE('',#5966,0.25);
+#5966 = AXIS2_PLACEMENT_3D('',#5967,#5968,#5969);
+#5967 = CARTESIAN_POINT('',(-1.9,1.9,0.91));
+#5968 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#5969 = DIRECTION('',(6.661338147751E-016,-1.,0.E+000));
+#5970 = ORIENTED_EDGE('',*,*,#5956,.F.);
+#5971 = CYLINDRICAL_SURFACE('',#5972,0.25);
+#5972 = AXIS2_PLACEMENT_3D('',#5973,#5974,#5975);
+#5973 = CARTESIAN_POINT('',(-1.9,1.9,0.93));
+#5974 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#5975 = DIRECTION('',(6.661338147751E-016,-1.,0.E+000));
+#5976 = ADVANCED_FACE('',(#5977),#5980,.T.);
+#5977 = FACE_BOUND('',#5978,.T.);
+#5978 = EDGE_LOOP('',(#5979));
+#5979 = ORIENTED_EDGE('',*,*,#5964,.T.);
+#5980 = PLANE('',#5981);
+#5981 = AXIS2_PLACEMENT_3D('',#5982,#5983,#5984);
+#5982 = CARTESIAN_POINT('',(-1.9,1.9,0.91));
+#5983 = DIRECTION('',(0.E+000,0.E+000,1.));
+#5984 = DIRECTION('',(6.661338147751E-016,-1.,0.E+000));
+#5985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#5989))
+GLOBAL_UNIT_ASSIGNED_CONTEXT((#5986,#5987,#5988)) REPRESENTATION_CONTEXT
+('Context #1','3D Context with UNIT and UNCERTAINTY') );
+#5986 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#5987 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#5988 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#5989 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#5986,
+'distance_accuracy_value','confusion accuracy');
+#5990 = PRODUCT_TYPE('part',$,(#7));
+#5991 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(
+#5992,#6000,#6007,#6014,#6021,#6028,#6036,#6043,#6050,#6057,#6064,
+#6071,#6078,#6085,#6092,#6099,#6106,#6113,#6120,#6127,#6134,#6141,
+#6148,#6155,#6162,#6169,#6176,#6183,#6190,#6197,#6204,#6211,#6218,
+#6225,#6232,#6239,#6246,#6253,#6260,#6267,#6274,#6281,#6288,#6295,
+#6302,#6309,#6316,#6323,#6330,#6337,#6344,#6351,#6358,#6365,#6372,
+#6379,#6386,#6393,#6400,#6407,#6414,#6421,#6428,#6435,#6442,#6449,
+#6456,#6463,#6470,#6477,#6484,#6491,#6498,#6505,#6512,#6519,#6526,
+#6533,#6540,#6547,#6554,#6561,#6568,#6575,#6582,#6589,#6596,#6603,
+#6610,#6617,#6624,#6631,#6638,#6645,#6652,#6659,#6666,#6673,#6680,
+#6687,#6694,#6701,#6708,#6715,#6722,#6729,#6736,#6743,#6750,#6757,
+#6764,#6771,#6778,#6785,#6792,#6799,#6806,#6813,#6820,#6827,#6834,
+#6841,#6848,#6855,#6862,#6869,#6876,#6883,#6890,#6897,#6904,#6911,
+#6918,#6925,#6932,#6939,#6946,#6953,#6960,#6967,#6974,#6981,#6988,
+#6995,#7002,#7009,#7016,#7023,#7030,#7037,#7044,#7051,#7058,#7065,
+#7072,#7079,#7086,#7093,#7100,#7107,#7114,#7121,#7128,#7135,#7142,
+#7149,#7156,#7163,#7170,#7177,#7184,#7191,#7198,#7205,#7212,#7219,
+#7226,#7233,#7240,#7247,#7254,#7262),#5985);
+#5992 = STYLED_ITEM('color',(#5993),#17);
+#5993 = PRESENTATION_STYLE_ASSIGNMENT((#5994));
+#5994 = SURFACE_STYLE_USAGE(.BOTH.,#5995);
+#5995 = SURFACE_SIDE_STYLE('',(#5996));
+#5996 = SURFACE_STYLE_FILL_AREA(#5997);
+#5997 = FILL_AREA_STYLE('',(#5998));
+#5998 = FILL_AREA_STYLE_COLOUR('',#5999);
+#5999 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812);
+#6000 = STYLED_ITEM('color',(#6001),#58);
+#6001 = PRESENTATION_STYLE_ASSIGNMENT((#6002));
+#6002 = SURFACE_STYLE_USAGE(.BOTH.,#6003);
+#6003 = SURFACE_SIDE_STYLE('',(#6004));
+#6004 = SURFACE_STYLE_FILL_AREA(#6005);
+#6005 = FILL_AREA_STYLE('',(#6006));
+#6006 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6007 = STYLED_ITEM('color',(#6008),#105);
+#6008 = PRESENTATION_STYLE_ASSIGNMENT((#6009));
+#6009 = SURFACE_STYLE_USAGE(.BOTH.,#6010);
+#6010 = SURFACE_SIDE_STYLE('',(#6011));
+#6011 = SURFACE_STYLE_FILL_AREA(#6012);
+#6012 = FILL_AREA_STYLE('',(#6013));
+#6013 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6014 = STYLED_ITEM('color',(#6015),#130);
+#6015 = PRESENTATION_STYLE_ASSIGNMENT((#6016));
+#6016 = SURFACE_STYLE_USAGE(.BOTH.,#6017);
+#6017 = SURFACE_SIDE_STYLE('',(#6018));
+#6018 = SURFACE_STYLE_FILL_AREA(#6019);
+#6019 = FILL_AREA_STYLE('',(#6020));
+#6020 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6021 = STYLED_ITEM('color',(#6022),#170);
+#6022 = PRESENTATION_STYLE_ASSIGNMENT((#6023));
+#6023 = SURFACE_STYLE_USAGE(.BOTH.,#6024);
+#6024 = SURFACE_SIDE_STYLE('',(#6025));
+#6025 = SURFACE_STYLE_FILL_AREA(#6026);
+#6026 = FILL_AREA_STYLE('',(#6027));
+#6027 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6028 = STYLED_ITEM('color',(#6029),#187);
+#6029 = PRESENTATION_STYLE_ASSIGNMENT((#6030));
+#6030 = SURFACE_STYLE_USAGE(.BOTH.,#6031);
+#6031 = SURFACE_SIDE_STYLE('',(#6032));
+#6032 = SURFACE_STYLE_FILL_AREA(#6033);
+#6033 = FILL_AREA_STYLE('',(#6034));
+#6034 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6035 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828);
+#6036 = STYLED_ITEM('color',(#6037),#1169);
+#6037 = PRESENTATION_STYLE_ASSIGNMENT((#6038));
+#6038 = SURFACE_STYLE_USAGE(.BOTH.,#6039);
+#6039 = SURFACE_SIDE_STYLE('',(#6040));
+#6040 = SURFACE_STYLE_FILL_AREA(#6041);
+#6041 = FILL_AREA_STYLE('',(#6042));
+#6042 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6043 = STYLED_ITEM('color',(#6044),#1347);
+#6044 = PRESENTATION_STYLE_ASSIGNMENT((#6045));
+#6045 = SURFACE_STYLE_USAGE(.BOTH.,#6046);
+#6046 = SURFACE_SIDE_STYLE('',(#6047));
+#6047 = SURFACE_STYLE_FILL_AREA(#6048);
+#6048 = FILL_AREA_STYLE('',(#6049));
+#6049 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6050 = STYLED_ITEM('color',(#6051),#1359);
+#6051 = PRESENTATION_STYLE_ASSIGNMENT((#6052));
+#6052 = SURFACE_STYLE_USAGE(.BOTH.,#6053);
+#6053 = SURFACE_SIDE_STYLE('',(#6054));
+#6054 = SURFACE_STYLE_FILL_AREA(#6055);
+#6055 = FILL_AREA_STYLE('',(#6056));
+#6056 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6057 = STYLED_ITEM('color',(#6058),#1544);
+#6058 = PRESENTATION_STYLE_ASSIGNMENT((#6059));
+#6059 = SURFACE_STYLE_USAGE(.BOTH.,#6060);
+#6060 = SURFACE_SIDE_STYLE('',(#6061));
+#6061 = SURFACE_STYLE_FILL_AREA(#6062);
+#6062 = FILL_AREA_STYLE('',(#6063));
+#6063 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6064 = STYLED_ITEM('color',(#6065),#1584);
+#6065 = PRESENTATION_STYLE_ASSIGNMENT((#6066));
+#6066 = SURFACE_STYLE_USAGE(.BOTH.,#6067);
+#6067 = SURFACE_SIDE_STYLE('',(#6068));
+#6068 = SURFACE_STYLE_FILL_AREA(#6069);
+#6069 = FILL_AREA_STYLE('',(#6070));
+#6070 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6071 = STYLED_ITEM('color',(#6072),#1624);
+#6072 = PRESENTATION_STYLE_ASSIGNMENT((#6073));
+#6073 = SURFACE_STYLE_USAGE(.BOTH.,#6074);
+#6074 = SURFACE_SIDE_STYLE('',(#6075));
+#6075 = SURFACE_STYLE_FILL_AREA(#6076);
+#6076 = FILL_AREA_STYLE('',(#6077));
+#6077 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6078 = STYLED_ITEM('color',(#6079),#1649);
+#6079 = PRESENTATION_STYLE_ASSIGNMENT((#6080));
+#6080 = SURFACE_STYLE_USAGE(.BOTH.,#6081);
+#6081 = SURFACE_SIDE_STYLE('',(#6082));
+#6082 = SURFACE_STYLE_FILL_AREA(#6083);
+#6083 = FILL_AREA_STYLE('',(#6084));
+#6084 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6085 = STYLED_ITEM('color',(#6086),#1674);
+#6086 = PRESENTATION_STYLE_ASSIGNMENT((#6087));
+#6087 = SURFACE_STYLE_USAGE(.BOTH.,#6088);
+#6088 = SURFACE_SIDE_STYLE('',(#6089));
+#6089 = SURFACE_STYLE_FILL_AREA(#6090);
+#6090 = FILL_AREA_STYLE('',(#6091));
+#6091 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6092 = STYLED_ITEM('color',(#6093),#1707);
+#6093 = PRESENTATION_STYLE_ASSIGNMENT((#6094));
+#6094 = SURFACE_STYLE_USAGE(.BOTH.,#6095);
+#6095 = SURFACE_SIDE_STYLE('',(#6096));
+#6096 = SURFACE_STYLE_FILL_AREA(#6097);
+#6097 = FILL_AREA_STYLE('',(#6098));
+#6098 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6099 = STYLED_ITEM('color',(#6100),#1740);
+#6100 = PRESENTATION_STYLE_ASSIGNMENT((#6101));
+#6101 = SURFACE_STYLE_USAGE(.BOTH.,#6102);
+#6102 = SURFACE_SIDE_STYLE('',(#6103));
+#6103 = SURFACE_STYLE_FILL_AREA(#6104);
+#6104 = FILL_AREA_STYLE('',(#6105));
+#6105 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6106 = STYLED_ITEM('color',(#6107),#1780);
+#6107 = PRESENTATION_STYLE_ASSIGNMENT((#6108));
+#6108 = SURFACE_STYLE_USAGE(.BOTH.,#6109);
+#6109 = SURFACE_SIDE_STYLE('',(#6110));
+#6110 = SURFACE_STYLE_FILL_AREA(#6111);
+#6111 = FILL_AREA_STYLE('',(#6112));
+#6112 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6113 = STYLED_ITEM('color',(#6114),#1805);
+#6114 = PRESENTATION_STYLE_ASSIGNMENT((#6115));
+#6115 = SURFACE_STYLE_USAGE(.BOTH.,#6116);
+#6116 = SURFACE_SIDE_STYLE('',(#6117));
+#6117 = SURFACE_STYLE_FILL_AREA(#6118);
+#6118 = FILL_AREA_STYLE('',(#6119));
+#6119 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6120 = STYLED_ITEM('color',(#6121),#1838);
+#6121 = PRESENTATION_STYLE_ASSIGNMENT((#6122));
+#6122 = SURFACE_STYLE_USAGE(.BOTH.,#6123);
+#6123 = SURFACE_SIDE_STYLE('',(#6124));
+#6124 = SURFACE_STYLE_FILL_AREA(#6125);
+#6125 = FILL_AREA_STYLE('',(#6126));
+#6126 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6127 = STYLED_ITEM('color',(#6128),#1878);
+#6128 = PRESENTATION_STYLE_ASSIGNMENT((#6129));
+#6129 = SURFACE_STYLE_USAGE(.BOTH.,#6130);
+#6130 = SURFACE_SIDE_STYLE('',(#6131));
+#6131 = SURFACE_STYLE_FILL_AREA(#6132);
+#6132 = FILL_AREA_STYLE('',(#6133));
+#6133 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6134 = STYLED_ITEM('color',(#6135),#1918);
+#6135 = PRESENTATION_STYLE_ASSIGNMENT((#6136));
+#6136 = SURFACE_STYLE_USAGE(.BOTH.,#6137);
+#6137 = SURFACE_SIDE_STYLE('',(#6138));
+#6138 = SURFACE_STYLE_FILL_AREA(#6139);
+#6139 = FILL_AREA_STYLE('',(#6140));
+#6140 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6141 = STYLED_ITEM('color',(#6142),#1943);
+#6142 = PRESENTATION_STYLE_ASSIGNMENT((#6143));
+#6143 = SURFACE_STYLE_USAGE(.BOTH.,#6144);
+#6144 = SURFACE_SIDE_STYLE('',(#6145));
+#6145 = SURFACE_STYLE_FILL_AREA(#6146);
+#6146 = FILL_AREA_STYLE('',(#6147));
+#6147 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6148 = STYLED_ITEM('color',(#6149),#1968);
+#6149 = PRESENTATION_STYLE_ASSIGNMENT((#6150));
+#6150 = SURFACE_STYLE_USAGE(.BOTH.,#6151);
+#6151 = SURFACE_SIDE_STYLE('',(#6152));
+#6152 = SURFACE_STYLE_FILL_AREA(#6153);
+#6153 = FILL_AREA_STYLE('',(#6154));
+#6154 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6155 = STYLED_ITEM('color',(#6156),#2001);
+#6156 = PRESENTATION_STYLE_ASSIGNMENT((#6157));
+#6157 = SURFACE_STYLE_USAGE(.BOTH.,#6158);
+#6158 = SURFACE_SIDE_STYLE('',(#6159));
+#6159 = SURFACE_STYLE_FILL_AREA(#6160);
+#6160 = FILL_AREA_STYLE('',(#6161));
+#6161 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6162 = STYLED_ITEM('color',(#6163),#2034);
+#6163 = PRESENTATION_STYLE_ASSIGNMENT((#6164));
+#6164 = SURFACE_STYLE_USAGE(.BOTH.,#6165);
+#6165 = SURFACE_SIDE_STYLE('',(#6166));
+#6166 = SURFACE_STYLE_FILL_AREA(#6167);
+#6167 = FILL_AREA_STYLE('',(#6168));
+#6168 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6169 = STYLED_ITEM('color',(#6170),#2074);
+#6170 = PRESENTATION_STYLE_ASSIGNMENT((#6171));
+#6171 = SURFACE_STYLE_USAGE(.BOTH.,#6172);
+#6172 = SURFACE_SIDE_STYLE('',(#6173));
+#6173 = SURFACE_STYLE_FILL_AREA(#6174);
+#6174 = FILL_AREA_STYLE('',(#6175));
+#6175 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6176 = STYLED_ITEM('color',(#6177),#2114);
+#6177 = PRESENTATION_STYLE_ASSIGNMENT((#6178));
+#6178 = SURFACE_STYLE_USAGE(.BOTH.,#6179);
+#6179 = SURFACE_SIDE_STYLE('',(#6180));
+#6180 = SURFACE_STYLE_FILL_AREA(#6181);
+#6181 = FILL_AREA_STYLE('',(#6182));
+#6182 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6183 = STYLED_ITEM('color',(#6184),#2139);
+#6184 = PRESENTATION_STYLE_ASSIGNMENT((#6185));
+#6185 = SURFACE_STYLE_USAGE(.BOTH.,#6186);
+#6186 = SURFACE_SIDE_STYLE('',(#6187));
+#6187 = SURFACE_STYLE_FILL_AREA(#6188);
+#6188 = FILL_AREA_STYLE('',(#6189));
+#6189 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6190 = STYLED_ITEM('color',(#6191),#2164);
+#6191 = PRESENTATION_STYLE_ASSIGNMENT((#6192));
+#6192 = SURFACE_STYLE_USAGE(.BOTH.,#6193);
+#6193 = SURFACE_SIDE_STYLE('',(#6194));
+#6194 = SURFACE_STYLE_FILL_AREA(#6195);
+#6195 = FILL_AREA_STYLE('',(#6196));
+#6196 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6197 = STYLED_ITEM('color',(#6198),#2197);
+#6198 = PRESENTATION_STYLE_ASSIGNMENT((#6199));
+#6199 = SURFACE_STYLE_USAGE(.BOTH.,#6200);
+#6200 = SURFACE_SIDE_STYLE('',(#6201));
+#6201 = SURFACE_STYLE_FILL_AREA(#6202);
+#6202 = FILL_AREA_STYLE('',(#6203));
+#6203 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6204 = STYLED_ITEM('color',(#6205),#2230);
+#6205 = PRESENTATION_STYLE_ASSIGNMENT((#6206));
+#6206 = SURFACE_STYLE_USAGE(.BOTH.,#6207);
+#6207 = SURFACE_SIDE_STYLE('',(#6208));
+#6208 = SURFACE_STYLE_FILL_AREA(#6209);
+#6209 = FILL_AREA_STYLE('',(#6210));
+#6210 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6211 = STYLED_ITEM('color',(#6212),#2270);
+#6212 = PRESENTATION_STYLE_ASSIGNMENT((#6213));
+#6213 = SURFACE_STYLE_USAGE(.BOTH.,#6214);
+#6214 = SURFACE_SIDE_STYLE('',(#6215));
+#6215 = SURFACE_STYLE_FILL_AREA(#6216);
+#6216 = FILL_AREA_STYLE('',(#6217));
+#6217 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6218 = STYLED_ITEM('color',(#6219),#2310);
+#6219 = PRESENTATION_STYLE_ASSIGNMENT((#6220));
+#6220 = SURFACE_STYLE_USAGE(.BOTH.,#6221);
+#6221 = SURFACE_SIDE_STYLE('',(#6222));
+#6222 = SURFACE_STYLE_FILL_AREA(#6223);
+#6223 = FILL_AREA_STYLE('',(#6224));
+#6224 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6225 = STYLED_ITEM('color',(#6226),#2335);
+#6226 = PRESENTATION_STYLE_ASSIGNMENT((#6227));
+#6227 = SURFACE_STYLE_USAGE(.BOTH.,#6228);
+#6228 = SURFACE_SIDE_STYLE('',(#6229));
+#6229 = SURFACE_STYLE_FILL_AREA(#6230);
+#6230 = FILL_AREA_STYLE('',(#6231));
+#6231 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6232 = STYLED_ITEM('color',(#6233),#2360);
+#6233 = PRESENTATION_STYLE_ASSIGNMENT((#6234));
+#6234 = SURFACE_STYLE_USAGE(.BOTH.,#6235);
+#6235 = SURFACE_SIDE_STYLE('',(#6236));
+#6236 = SURFACE_STYLE_FILL_AREA(#6237);
+#6237 = FILL_AREA_STYLE('',(#6238));
+#6238 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6239 = STYLED_ITEM('color',(#6240),#2393);
+#6240 = PRESENTATION_STYLE_ASSIGNMENT((#6241));
+#6241 = SURFACE_STYLE_USAGE(.BOTH.,#6242);
+#6242 = SURFACE_SIDE_STYLE('',(#6243));
+#6243 = SURFACE_STYLE_FILL_AREA(#6244);
+#6244 = FILL_AREA_STYLE('',(#6245));
+#6245 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6246 = STYLED_ITEM('color',(#6247),#2426);
+#6247 = PRESENTATION_STYLE_ASSIGNMENT((#6248));
+#6248 = SURFACE_STYLE_USAGE(.BOTH.,#6249);
+#6249 = SURFACE_SIDE_STYLE('',(#6250));
+#6250 = SURFACE_STYLE_FILL_AREA(#6251);
+#6251 = FILL_AREA_STYLE('',(#6252));
+#6252 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6253 = STYLED_ITEM('color',(#6254),#2466);
+#6254 = PRESENTATION_STYLE_ASSIGNMENT((#6255));
+#6255 = SURFACE_STYLE_USAGE(.BOTH.,#6256);
+#6256 = SURFACE_SIDE_STYLE('',(#6257));
+#6257 = SURFACE_STYLE_FILL_AREA(#6258);
+#6258 = FILL_AREA_STYLE('',(#6259));
+#6259 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6260 = STYLED_ITEM('color',(#6261),#2506);
+#6261 = PRESENTATION_STYLE_ASSIGNMENT((#6262));
+#6262 = SURFACE_STYLE_USAGE(.BOTH.,#6263);
+#6263 = SURFACE_SIDE_STYLE('',(#6264));
+#6264 = SURFACE_STYLE_FILL_AREA(#6265);
+#6265 = FILL_AREA_STYLE('',(#6266));
+#6266 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6267 = STYLED_ITEM('color',(#6268),#2531);
+#6268 = PRESENTATION_STYLE_ASSIGNMENT((#6269));
+#6269 = SURFACE_STYLE_USAGE(.BOTH.,#6270);
+#6270 = SURFACE_SIDE_STYLE('',(#6271));
+#6271 = SURFACE_STYLE_FILL_AREA(#6272);
+#6272 = FILL_AREA_STYLE('',(#6273));
+#6273 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6274 = STYLED_ITEM('color',(#6275),#2556);
+#6275 = PRESENTATION_STYLE_ASSIGNMENT((#6276));
+#6276 = SURFACE_STYLE_USAGE(.BOTH.,#6277);
+#6277 = SURFACE_SIDE_STYLE('',(#6278));
+#6278 = SURFACE_STYLE_FILL_AREA(#6279);
+#6279 = FILL_AREA_STYLE('',(#6280));
+#6280 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6281 = STYLED_ITEM('color',(#6282),#2589);
+#6282 = PRESENTATION_STYLE_ASSIGNMENT((#6283));
+#6283 = SURFACE_STYLE_USAGE(.BOTH.,#6284);
+#6284 = SURFACE_SIDE_STYLE('',(#6285));
+#6285 = SURFACE_STYLE_FILL_AREA(#6286);
+#6286 = FILL_AREA_STYLE('',(#6287));
+#6287 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6288 = STYLED_ITEM('color',(#6289),#2622);
+#6289 = PRESENTATION_STYLE_ASSIGNMENT((#6290));
+#6290 = SURFACE_STYLE_USAGE(.BOTH.,#6291);
+#6291 = SURFACE_SIDE_STYLE('',(#6292));
+#6292 = SURFACE_STYLE_FILL_AREA(#6293);
+#6293 = FILL_AREA_STYLE('',(#6294));
+#6294 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6295 = STYLED_ITEM('color',(#6296),#2662);
+#6296 = PRESENTATION_STYLE_ASSIGNMENT((#6297));
+#6297 = SURFACE_STYLE_USAGE(.BOTH.,#6298);
+#6298 = SURFACE_SIDE_STYLE('',(#6299));
+#6299 = SURFACE_STYLE_FILL_AREA(#6300);
+#6300 = FILL_AREA_STYLE('',(#6301));
+#6301 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6302 = STYLED_ITEM('color',(#6303),#2702);
+#6303 = PRESENTATION_STYLE_ASSIGNMENT((#6304));
+#6304 = SURFACE_STYLE_USAGE(.BOTH.,#6305);
+#6305 = SURFACE_SIDE_STYLE('',(#6306));
+#6306 = SURFACE_STYLE_FILL_AREA(#6307);
+#6307 = FILL_AREA_STYLE('',(#6308));
+#6308 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6309 = STYLED_ITEM('color',(#6310),#2727);
+#6310 = PRESENTATION_STYLE_ASSIGNMENT((#6311));
+#6311 = SURFACE_STYLE_USAGE(.BOTH.,#6312);
+#6312 = SURFACE_SIDE_STYLE('',(#6313));
+#6313 = SURFACE_STYLE_FILL_AREA(#6314);
+#6314 = FILL_AREA_STYLE('',(#6315));
+#6315 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6316 = STYLED_ITEM('color',(#6317),#2752);
+#6317 = PRESENTATION_STYLE_ASSIGNMENT((#6318));
+#6318 = SURFACE_STYLE_USAGE(.BOTH.,#6319);
+#6319 = SURFACE_SIDE_STYLE('',(#6320));
+#6320 = SURFACE_STYLE_FILL_AREA(#6321);
+#6321 = FILL_AREA_STYLE('',(#6322));
+#6322 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6323 = STYLED_ITEM('color',(#6324),#2785);
+#6324 = PRESENTATION_STYLE_ASSIGNMENT((#6325));
+#6325 = SURFACE_STYLE_USAGE(.BOTH.,#6326);
+#6326 = SURFACE_SIDE_STYLE('',(#6327));
+#6327 = SURFACE_STYLE_FILL_AREA(#6328);
+#6328 = FILL_AREA_STYLE('',(#6329));
+#6329 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6330 = STYLED_ITEM('color',(#6331),#2818);
+#6331 = PRESENTATION_STYLE_ASSIGNMENT((#6332));
+#6332 = SURFACE_STYLE_USAGE(.BOTH.,#6333);
+#6333 = SURFACE_SIDE_STYLE('',(#6334));
+#6334 = SURFACE_STYLE_FILL_AREA(#6335);
+#6335 = FILL_AREA_STYLE('',(#6336));
+#6336 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6337 = STYLED_ITEM('color',(#6338),#3003);
+#6338 = PRESENTATION_STYLE_ASSIGNMENT((#6339));
+#6339 = SURFACE_STYLE_USAGE(.BOTH.,#6340);
+#6340 = SURFACE_SIDE_STYLE('',(#6341));
+#6341 = SURFACE_STYLE_FILL_AREA(#6342);
+#6342 = FILL_AREA_STYLE('',(#6343));
+#6343 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6344 = STYLED_ITEM('color',(#6345),#3181);
+#6345 = PRESENTATION_STYLE_ASSIGNMENT((#6346));
+#6346 = SURFACE_STYLE_USAGE(.BOTH.,#6347);
+#6347 = SURFACE_SIDE_STYLE('',(#6348));
+#6348 = SURFACE_STYLE_FILL_AREA(#6349);
+#6349 = FILL_AREA_STYLE('',(#6350));
+#6350 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6351 = STYLED_ITEM('color',(#6352),#3221);
+#6352 = PRESENTATION_STYLE_ASSIGNMENT((#6353));
+#6353 = SURFACE_STYLE_USAGE(.BOTH.,#6354);
+#6354 = SURFACE_SIDE_STYLE('',(#6355));
+#6355 = SURFACE_STYLE_FILL_AREA(#6356);
+#6356 = FILL_AREA_STYLE('',(#6357));
+#6357 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6358 = STYLED_ITEM('color',(#6359),#3261);
+#6359 = PRESENTATION_STYLE_ASSIGNMENT((#6360));
+#6360 = SURFACE_STYLE_USAGE(.BOTH.,#6361);
+#6361 = SURFACE_SIDE_STYLE('',(#6362));
+#6362 = SURFACE_STYLE_FILL_AREA(#6363);
+#6363 = FILL_AREA_STYLE('',(#6364));
+#6364 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6365 = STYLED_ITEM('color',(#6366),#3286);
+#6366 = PRESENTATION_STYLE_ASSIGNMENT((#6367));
+#6367 = SURFACE_STYLE_USAGE(.BOTH.,#6368);
+#6368 = SURFACE_SIDE_STYLE('',(#6369));
+#6369 = SURFACE_STYLE_FILL_AREA(#6370);
+#6370 = FILL_AREA_STYLE('',(#6371));
+#6371 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6372 = STYLED_ITEM('color',(#6373),#3311);
+#6373 = PRESENTATION_STYLE_ASSIGNMENT((#6374));
+#6374 = SURFACE_STYLE_USAGE(.BOTH.,#6375);
+#6375 = SURFACE_SIDE_STYLE('',(#6376));
+#6376 = SURFACE_STYLE_FILL_AREA(#6377);
+#6377 = FILL_AREA_STYLE('',(#6378));
+#6378 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6379 = STYLED_ITEM('color',(#6380),#3344);
+#6380 = PRESENTATION_STYLE_ASSIGNMENT((#6381));
+#6381 = SURFACE_STYLE_USAGE(.BOTH.,#6382);
+#6382 = SURFACE_SIDE_STYLE('',(#6383));
+#6383 = SURFACE_STYLE_FILL_AREA(#6384);
+#6384 = FILL_AREA_STYLE('',(#6385));
+#6385 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6386 = STYLED_ITEM('color',(#6387),#3377);
+#6387 = PRESENTATION_STYLE_ASSIGNMENT((#6388));
+#6388 = SURFACE_STYLE_USAGE(.BOTH.,#6389);
+#6389 = SURFACE_SIDE_STYLE('',(#6390));
+#6390 = SURFACE_STYLE_FILL_AREA(#6391);
+#6391 = FILL_AREA_STYLE('',(#6392));
+#6392 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6393 = STYLED_ITEM('color',(#6394),#3417);
+#6394 = PRESENTATION_STYLE_ASSIGNMENT((#6395));
+#6395 = SURFACE_STYLE_USAGE(.BOTH.,#6396);
+#6396 = SURFACE_SIDE_STYLE('',(#6397));
+#6397 = SURFACE_STYLE_FILL_AREA(#6398);
+#6398 = FILL_AREA_STYLE('',(#6399));
+#6399 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6400 = STYLED_ITEM('color',(#6401),#3457);
+#6401 = PRESENTATION_STYLE_ASSIGNMENT((#6402));
+#6402 = SURFACE_STYLE_USAGE(.BOTH.,#6403);
+#6403 = SURFACE_SIDE_STYLE('',(#6404));
+#6404 = SURFACE_STYLE_FILL_AREA(#6405);
+#6405 = FILL_AREA_STYLE('',(#6406));
+#6406 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6407 = STYLED_ITEM('color',(#6408),#3482);
+#6408 = PRESENTATION_STYLE_ASSIGNMENT((#6409));
+#6409 = SURFACE_STYLE_USAGE(.BOTH.,#6410);
+#6410 = SURFACE_SIDE_STYLE('',(#6411));
+#6411 = SURFACE_STYLE_FILL_AREA(#6412);
+#6412 = FILL_AREA_STYLE('',(#6413));
+#6413 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6414 = STYLED_ITEM('color',(#6415),#3507);
+#6415 = PRESENTATION_STYLE_ASSIGNMENT((#6416));
+#6416 = SURFACE_STYLE_USAGE(.BOTH.,#6417);
+#6417 = SURFACE_SIDE_STYLE('',(#6418));
+#6418 = SURFACE_STYLE_FILL_AREA(#6419);
+#6419 = FILL_AREA_STYLE('',(#6420));
+#6420 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6421 = STYLED_ITEM('color',(#6422),#3540);
+#6422 = PRESENTATION_STYLE_ASSIGNMENT((#6423));
+#6423 = SURFACE_STYLE_USAGE(.BOTH.,#6424);
+#6424 = SURFACE_SIDE_STYLE('',(#6425));
+#6425 = SURFACE_STYLE_FILL_AREA(#6426);
+#6426 = FILL_AREA_STYLE('',(#6427));
+#6427 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6428 = STYLED_ITEM('color',(#6429),#3573);
+#6429 = PRESENTATION_STYLE_ASSIGNMENT((#6430));
+#6430 = SURFACE_STYLE_USAGE(.BOTH.,#6431);
+#6431 = SURFACE_SIDE_STYLE('',(#6432));
+#6432 = SURFACE_STYLE_FILL_AREA(#6433);
+#6433 = FILL_AREA_STYLE('',(#6434));
+#6434 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6435 = STYLED_ITEM('color',(#6436),#3613);
+#6436 = PRESENTATION_STYLE_ASSIGNMENT((#6437));
+#6437 = SURFACE_STYLE_USAGE(.BOTH.,#6438);
+#6438 = SURFACE_SIDE_STYLE('',(#6439));
+#6439 = SURFACE_STYLE_FILL_AREA(#6440);
+#6440 = FILL_AREA_STYLE('',(#6441));
+#6441 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6442 = STYLED_ITEM('color',(#6443),#3653);
+#6443 = PRESENTATION_STYLE_ASSIGNMENT((#6444));
+#6444 = SURFACE_STYLE_USAGE(.BOTH.,#6445);
+#6445 = SURFACE_SIDE_STYLE('',(#6446));
+#6446 = SURFACE_STYLE_FILL_AREA(#6447);
+#6447 = FILL_AREA_STYLE('',(#6448));
+#6448 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6449 = STYLED_ITEM('color',(#6450),#3678);
+#6450 = PRESENTATION_STYLE_ASSIGNMENT((#6451));
+#6451 = SURFACE_STYLE_USAGE(.BOTH.,#6452);
+#6452 = SURFACE_SIDE_STYLE('',(#6453));
+#6453 = SURFACE_STYLE_FILL_AREA(#6454);
+#6454 = FILL_AREA_STYLE('',(#6455));
+#6455 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6456 = STYLED_ITEM('color',(#6457),#3703);
+#6457 = PRESENTATION_STYLE_ASSIGNMENT((#6458));
+#6458 = SURFACE_STYLE_USAGE(.BOTH.,#6459);
+#6459 = SURFACE_SIDE_STYLE('',(#6460));
+#6460 = SURFACE_STYLE_FILL_AREA(#6461);
+#6461 = FILL_AREA_STYLE('',(#6462));
+#6462 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6463 = STYLED_ITEM('color',(#6464),#3736);
+#6464 = PRESENTATION_STYLE_ASSIGNMENT((#6465));
+#6465 = SURFACE_STYLE_USAGE(.BOTH.,#6466);
+#6466 = SURFACE_SIDE_STYLE('',(#6467));
+#6467 = SURFACE_STYLE_FILL_AREA(#6468);
+#6468 = FILL_AREA_STYLE('',(#6469));
+#6469 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6470 = STYLED_ITEM('color',(#6471),#3769);
+#6471 = PRESENTATION_STYLE_ASSIGNMENT((#6472));
+#6472 = SURFACE_STYLE_USAGE(.BOTH.,#6473);
+#6473 = SURFACE_SIDE_STYLE('',(#6474));
+#6474 = SURFACE_STYLE_FILL_AREA(#6475);
+#6475 = FILL_AREA_STYLE('',(#6476));
+#6476 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6477 = STYLED_ITEM('color',(#6478),#3809);
+#6478 = PRESENTATION_STYLE_ASSIGNMENT((#6479));
+#6479 = SURFACE_STYLE_USAGE(.BOTH.,#6480);
+#6480 = SURFACE_SIDE_STYLE('',(#6481));
+#6481 = SURFACE_STYLE_FILL_AREA(#6482);
+#6482 = FILL_AREA_STYLE('',(#6483));
+#6483 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6484 = STYLED_ITEM('color',(#6485),#3849);
+#6485 = PRESENTATION_STYLE_ASSIGNMENT((#6486));
+#6486 = SURFACE_STYLE_USAGE(.BOTH.,#6487);
+#6487 = SURFACE_SIDE_STYLE('',(#6488));
+#6488 = SURFACE_STYLE_FILL_AREA(#6489);
+#6489 = FILL_AREA_STYLE('',(#6490));
+#6490 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6491 = STYLED_ITEM('color',(#6492),#3874);
+#6492 = PRESENTATION_STYLE_ASSIGNMENT((#6493));
+#6493 = SURFACE_STYLE_USAGE(.BOTH.,#6494);
+#6494 = SURFACE_SIDE_STYLE('',(#6495));
+#6495 = SURFACE_STYLE_FILL_AREA(#6496);
+#6496 = FILL_AREA_STYLE('',(#6497));
+#6497 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6498 = STYLED_ITEM('color',(#6499),#3899);
+#6499 = PRESENTATION_STYLE_ASSIGNMENT((#6500));
+#6500 = SURFACE_STYLE_USAGE(.BOTH.,#6501);
+#6501 = SURFACE_SIDE_STYLE('',(#6502));
+#6502 = SURFACE_STYLE_FILL_AREA(#6503);
+#6503 = FILL_AREA_STYLE('',(#6504));
+#6504 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6505 = STYLED_ITEM('color',(#6506),#3932);
+#6506 = PRESENTATION_STYLE_ASSIGNMENT((#6507));
+#6507 = SURFACE_STYLE_USAGE(.BOTH.,#6508);
+#6508 = SURFACE_SIDE_STYLE('',(#6509));
+#6509 = SURFACE_STYLE_FILL_AREA(#6510);
+#6510 = FILL_AREA_STYLE('',(#6511));
+#6511 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6512 = STYLED_ITEM('color',(#6513),#3965);
+#6513 = PRESENTATION_STYLE_ASSIGNMENT((#6514));
+#6514 = SURFACE_STYLE_USAGE(.BOTH.,#6515);
+#6515 = SURFACE_SIDE_STYLE('',(#6516));
+#6516 = SURFACE_STYLE_FILL_AREA(#6517);
+#6517 = FILL_AREA_STYLE('',(#6518));
+#6518 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6519 = STYLED_ITEM('color',(#6520),#4005);
+#6520 = PRESENTATION_STYLE_ASSIGNMENT((#6521));
+#6521 = SURFACE_STYLE_USAGE(.BOTH.,#6522);
+#6522 = SURFACE_SIDE_STYLE('',(#6523));
+#6523 = SURFACE_STYLE_FILL_AREA(#6524);
+#6524 = FILL_AREA_STYLE('',(#6525));
+#6525 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6526 = STYLED_ITEM('color',(#6527),#4045);
+#6527 = PRESENTATION_STYLE_ASSIGNMENT((#6528));
+#6528 = SURFACE_STYLE_USAGE(.BOTH.,#6529);
+#6529 = SURFACE_SIDE_STYLE('',(#6530));
+#6530 = SURFACE_STYLE_FILL_AREA(#6531);
+#6531 = FILL_AREA_STYLE('',(#6532));
+#6532 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6533 = STYLED_ITEM('color',(#6534),#4070);
+#6534 = PRESENTATION_STYLE_ASSIGNMENT((#6535));
+#6535 = SURFACE_STYLE_USAGE(.BOTH.,#6536);
+#6536 = SURFACE_SIDE_STYLE('',(#6537));
+#6537 = SURFACE_STYLE_FILL_AREA(#6538);
+#6538 = FILL_AREA_STYLE('',(#6539));
+#6539 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6540 = STYLED_ITEM('color',(#6541),#4095);
+#6541 = PRESENTATION_STYLE_ASSIGNMENT((#6542));
+#6542 = SURFACE_STYLE_USAGE(.BOTH.,#6543);
+#6543 = SURFACE_SIDE_STYLE('',(#6544));
+#6544 = SURFACE_STYLE_FILL_AREA(#6545);
+#6545 = FILL_AREA_STYLE('',(#6546));
+#6546 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6547 = STYLED_ITEM('color',(#6548),#4128);
+#6548 = PRESENTATION_STYLE_ASSIGNMENT((#6549));
+#6549 = SURFACE_STYLE_USAGE(.BOTH.,#6550);
+#6550 = SURFACE_SIDE_STYLE('',(#6551));
+#6551 = SURFACE_STYLE_FILL_AREA(#6552);
+#6552 = FILL_AREA_STYLE('',(#6553));
+#6553 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6554 = STYLED_ITEM('color',(#6555),#4161);
+#6555 = PRESENTATION_STYLE_ASSIGNMENT((#6556));
+#6556 = SURFACE_STYLE_USAGE(.BOTH.,#6557);
+#6557 = SURFACE_SIDE_STYLE('',(#6558));
+#6558 = SURFACE_STYLE_FILL_AREA(#6559);
+#6559 = FILL_AREA_STYLE('',(#6560));
+#6560 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6561 = STYLED_ITEM('color',(#6562),#4201);
+#6562 = PRESENTATION_STYLE_ASSIGNMENT((#6563));
+#6563 = SURFACE_STYLE_USAGE(.BOTH.,#6564);
+#6564 = SURFACE_SIDE_STYLE('',(#6565));
+#6565 = SURFACE_STYLE_FILL_AREA(#6566);
+#6566 = FILL_AREA_STYLE('',(#6567));
+#6567 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6568 = STYLED_ITEM('color',(#6569),#4241);
+#6569 = PRESENTATION_STYLE_ASSIGNMENT((#6570));
+#6570 = SURFACE_STYLE_USAGE(.BOTH.,#6571);
+#6571 = SURFACE_SIDE_STYLE('',(#6572));
+#6572 = SURFACE_STYLE_FILL_AREA(#6573);
+#6573 = FILL_AREA_STYLE('',(#6574));
+#6574 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6575 = STYLED_ITEM('color',(#6576),#4266);
+#6576 = PRESENTATION_STYLE_ASSIGNMENT((#6577));
+#6577 = SURFACE_STYLE_USAGE(.BOTH.,#6578);
+#6578 = SURFACE_SIDE_STYLE('',(#6579));
+#6579 = SURFACE_STYLE_FILL_AREA(#6580);
+#6580 = FILL_AREA_STYLE('',(#6581));
+#6581 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6582 = STYLED_ITEM('color',(#6583),#4291);
+#6583 = PRESENTATION_STYLE_ASSIGNMENT((#6584));
+#6584 = SURFACE_STYLE_USAGE(.BOTH.,#6585);
+#6585 = SURFACE_SIDE_STYLE('',(#6586));
+#6586 = SURFACE_STYLE_FILL_AREA(#6587);
+#6587 = FILL_AREA_STYLE('',(#6588));
+#6588 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6589 = STYLED_ITEM('color',(#6590),#4324);
+#6590 = PRESENTATION_STYLE_ASSIGNMENT((#6591));
+#6591 = SURFACE_STYLE_USAGE(.BOTH.,#6592);
+#6592 = SURFACE_SIDE_STYLE('',(#6593));
+#6593 = SURFACE_STYLE_FILL_AREA(#6594);
+#6594 = FILL_AREA_STYLE('',(#6595));
+#6595 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6596 = STYLED_ITEM('color',(#6597),#4357);
+#6597 = PRESENTATION_STYLE_ASSIGNMENT((#6598));
+#6598 = SURFACE_STYLE_USAGE(.BOTH.,#6599);
+#6599 = SURFACE_SIDE_STYLE('',(#6600));
+#6600 = SURFACE_STYLE_FILL_AREA(#6601);
+#6601 = FILL_AREA_STYLE('',(#6602));
+#6602 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6603 = STYLED_ITEM('color',(#6604),#4397);
+#6604 = PRESENTATION_STYLE_ASSIGNMENT((#6605));
+#6605 = SURFACE_STYLE_USAGE(.BOTH.,#6606);
+#6606 = SURFACE_SIDE_STYLE('',(#6607));
+#6607 = SURFACE_STYLE_FILL_AREA(#6608);
+#6608 = FILL_AREA_STYLE('',(#6609));
+#6609 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6610 = STYLED_ITEM('color',(#6611),#4437);
+#6611 = PRESENTATION_STYLE_ASSIGNMENT((#6612));
+#6612 = SURFACE_STYLE_USAGE(.BOTH.,#6613);
+#6613 = SURFACE_SIDE_STYLE('',(#6614));
+#6614 = SURFACE_STYLE_FILL_AREA(#6615);
+#6615 = FILL_AREA_STYLE('',(#6616));
+#6616 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6617 = STYLED_ITEM('color',(#6618),#4462);
+#6618 = PRESENTATION_STYLE_ASSIGNMENT((#6619));
+#6619 = SURFACE_STYLE_USAGE(.BOTH.,#6620);
+#6620 = SURFACE_SIDE_STYLE('',(#6621));
+#6621 = SURFACE_STYLE_FILL_AREA(#6622);
+#6622 = FILL_AREA_STYLE('',(#6623));
+#6623 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6624 = STYLED_ITEM('color',(#6625),#4487);
+#6625 = PRESENTATION_STYLE_ASSIGNMENT((#6626));
+#6626 = SURFACE_STYLE_USAGE(.BOTH.,#6627);
+#6627 = SURFACE_SIDE_STYLE('',(#6628));
+#6628 = SURFACE_STYLE_FILL_AREA(#6629);
+#6629 = FILL_AREA_STYLE('',(#6630));
+#6630 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6631 = STYLED_ITEM('color',(#6632),#4520);
+#6632 = PRESENTATION_STYLE_ASSIGNMENT((#6633));
+#6633 = SURFACE_STYLE_USAGE(.BOTH.,#6634);
+#6634 = SURFACE_SIDE_STYLE('',(#6635));
+#6635 = SURFACE_STYLE_FILL_AREA(#6636);
+#6636 = FILL_AREA_STYLE('',(#6637));
+#6637 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6638 = STYLED_ITEM('color',(#6639),#4553);
+#6639 = PRESENTATION_STYLE_ASSIGNMENT((#6640));
+#6640 = SURFACE_STYLE_USAGE(.BOTH.,#6641);
+#6641 = SURFACE_SIDE_STYLE('',(#6642));
+#6642 = SURFACE_STYLE_FILL_AREA(#6643);
+#6643 = FILL_AREA_STYLE('',(#6644));
+#6644 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6645 = STYLED_ITEM('color',(#6646),#4584);
+#6646 = PRESENTATION_STYLE_ASSIGNMENT((#6647));
+#6647 = SURFACE_STYLE_USAGE(.BOTH.,#6648);
+#6648 = SURFACE_SIDE_STYLE('',(#6649));
+#6649 = SURFACE_STYLE_FILL_AREA(#6650);
+#6650 = FILL_AREA_STYLE('',(#6651));
+#6651 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6652 = STYLED_ITEM('color',(#6653),#4608);
+#6653 = PRESENTATION_STYLE_ASSIGNMENT((#6654));
+#6654 = SURFACE_STYLE_USAGE(.BOTH.,#6655);
+#6655 = SURFACE_SIDE_STYLE('',(#6656));
+#6656 = SURFACE_STYLE_FILL_AREA(#6657);
+#6657 = FILL_AREA_STYLE('',(#6658));
+#6658 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6659 = STYLED_ITEM('color',(#6660),#4632);
+#6660 = PRESENTATION_STYLE_ASSIGNMENT((#6661));
+#6661 = SURFACE_STYLE_USAGE(.BOTH.,#6662);
+#6662 = SURFACE_SIDE_STYLE('',(#6663));
+#6663 = SURFACE_STYLE_FILL_AREA(#6664);
+#6664 = FILL_AREA_STYLE('',(#6665));
+#6665 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6666 = STYLED_ITEM('color',(#6667),#4656);
+#6667 = PRESENTATION_STYLE_ASSIGNMENT((#6668));
+#6668 = SURFACE_STYLE_USAGE(.BOTH.,#6669);
+#6669 = SURFACE_SIDE_STYLE('',(#6670));
+#6670 = SURFACE_STYLE_FILL_AREA(#6671);
+#6671 = FILL_AREA_STYLE('',(#6672));
+#6672 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6673 = STYLED_ITEM('color',(#6674),#4673);
+#6674 = PRESENTATION_STYLE_ASSIGNMENT((#6675));
+#6675 = SURFACE_STYLE_USAGE(.BOTH.,#6676);
+#6676 = SURFACE_SIDE_STYLE('',(#6677));
+#6677 = SURFACE_STYLE_FILL_AREA(#6678);
+#6678 = FILL_AREA_STYLE('',(#6679));
+#6679 = FILL_AREA_STYLE_COLOUR('',#6035);
+#6680 = STYLED_ITEM('color',(#6681),#4696);
+#6681 = PRESENTATION_STYLE_ASSIGNMENT((#6682));
+#6682 = SURFACE_STYLE_USAGE(.BOTH.,#6683);
+#6683 = SURFACE_SIDE_STYLE('',(#6684));
+#6684 = SURFACE_STYLE_FILL_AREA(#6685);
+#6685 = FILL_AREA_STYLE('',(#6686));
+#6686 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6687 = STYLED_ITEM('color',(#6688),#4713);
+#6688 = PRESENTATION_STYLE_ASSIGNMENT((#6689));
+#6689 = SURFACE_STYLE_USAGE(.BOTH.,#6690);
+#6690 = SURFACE_SIDE_STYLE('',(#6691));
+#6691 = SURFACE_STYLE_FILL_AREA(#6692);
+#6692 = FILL_AREA_STYLE('',(#6693));
+#6693 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6694 = STYLED_ITEM('color',(#6695),#4730);
+#6695 = PRESENTATION_STYLE_ASSIGNMENT((#6696));
+#6696 = SURFACE_STYLE_USAGE(.BOTH.,#6697);
+#6697 = SURFACE_SIDE_STYLE('',(#6698));
+#6698 = SURFACE_STYLE_FILL_AREA(#6699);
+#6699 = FILL_AREA_STYLE('',(#6700));
+#6700 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6701 = STYLED_ITEM('color',(#6702),#4747);
+#6702 = PRESENTATION_STYLE_ASSIGNMENT((#6703));
+#6703 = SURFACE_STYLE_USAGE(.BOTH.,#6704);
+#6704 = SURFACE_SIDE_STYLE('',(#6705));
+#6705 = SURFACE_STYLE_FILL_AREA(#6706);
+#6706 = FILL_AREA_STYLE('',(#6707));
+#6707 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6708 = STYLED_ITEM('color',(#6709),#4764);
+#6709 = PRESENTATION_STYLE_ASSIGNMENT((#6710));
+#6710 = SURFACE_STYLE_USAGE(.BOTH.,#6711);
+#6711 = SURFACE_SIDE_STYLE('',(#6712));
+#6712 = SURFACE_STYLE_FILL_AREA(#6713);
+#6713 = FILL_AREA_STYLE('',(#6714));
+#6714 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6715 = STYLED_ITEM('color',(#6716),#4781);
+#6716 = PRESENTATION_STYLE_ASSIGNMENT((#6717));
+#6717 = SURFACE_STYLE_USAGE(.BOTH.,#6718);
+#6718 = SURFACE_SIDE_STYLE('',(#6719));
+#6719 = SURFACE_STYLE_FILL_AREA(#6720);
+#6720 = FILL_AREA_STYLE('',(#6721));
+#6721 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6722 = STYLED_ITEM('color',(#6723),#4798);
+#6723 = PRESENTATION_STYLE_ASSIGNMENT((#6724));
+#6724 = SURFACE_STYLE_USAGE(.BOTH.,#6725);
+#6725 = SURFACE_SIDE_STYLE('',(#6726));
+#6726 = SURFACE_STYLE_FILL_AREA(#6727);
+#6727 = FILL_AREA_STYLE('',(#6728));
+#6728 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6729 = STYLED_ITEM('color',(#6730),#4815);
+#6730 = PRESENTATION_STYLE_ASSIGNMENT((#6731));
+#6731 = SURFACE_STYLE_USAGE(.BOTH.,#6732);
+#6732 = SURFACE_SIDE_STYLE('',(#6733));
+#6733 = SURFACE_STYLE_FILL_AREA(#6734);
+#6734 = FILL_AREA_STYLE('',(#6735));
+#6735 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6736 = STYLED_ITEM('color',(#6737),#4832);
+#6737 = PRESENTATION_STYLE_ASSIGNMENT((#6738));
+#6738 = SURFACE_STYLE_USAGE(.BOTH.,#6739);
+#6739 = SURFACE_SIDE_STYLE('',(#6740));
+#6740 = SURFACE_STYLE_FILL_AREA(#6741);
+#6741 = FILL_AREA_STYLE('',(#6742));
+#6742 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6743 = STYLED_ITEM('color',(#6744),#4849);
+#6744 = PRESENTATION_STYLE_ASSIGNMENT((#6745));
+#6745 = SURFACE_STYLE_USAGE(.BOTH.,#6746);
+#6746 = SURFACE_SIDE_STYLE('',(#6747));
+#6747 = SURFACE_STYLE_FILL_AREA(#6748);
+#6748 = FILL_AREA_STYLE('',(#6749));
+#6749 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6750 = STYLED_ITEM('color',(#6751),#4866);
+#6751 = PRESENTATION_STYLE_ASSIGNMENT((#6752));
+#6752 = SURFACE_STYLE_USAGE(.BOTH.,#6753);
+#6753 = SURFACE_SIDE_STYLE('',(#6754));
+#6754 = SURFACE_STYLE_FILL_AREA(#6755);
+#6755 = FILL_AREA_STYLE('',(#6756));
+#6756 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6757 = STYLED_ITEM('color',(#6758),#4883);
+#6758 = PRESENTATION_STYLE_ASSIGNMENT((#6759));
+#6759 = SURFACE_STYLE_USAGE(.BOTH.,#6760);
+#6760 = SURFACE_SIDE_STYLE('',(#6761));
+#6761 = SURFACE_STYLE_FILL_AREA(#6762);
+#6762 = FILL_AREA_STYLE('',(#6763));
+#6763 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6764 = STYLED_ITEM('color',(#6765),#4900);
+#6765 = PRESENTATION_STYLE_ASSIGNMENT((#6766));
+#6766 = SURFACE_STYLE_USAGE(.BOTH.,#6767);
+#6767 = SURFACE_SIDE_STYLE('',(#6768));
+#6768 = SURFACE_STYLE_FILL_AREA(#6769);
+#6769 = FILL_AREA_STYLE('',(#6770));
+#6770 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6771 = STYLED_ITEM('color',(#6772),#4917);
+#6772 = PRESENTATION_STYLE_ASSIGNMENT((#6773));
+#6773 = SURFACE_STYLE_USAGE(.BOTH.,#6774);
+#6774 = SURFACE_SIDE_STYLE('',(#6775));
+#6775 = SURFACE_STYLE_FILL_AREA(#6776);
+#6776 = FILL_AREA_STYLE('',(#6777));
+#6777 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6778 = STYLED_ITEM('color',(#6779),#4934);
+#6779 = PRESENTATION_STYLE_ASSIGNMENT((#6780));
+#6780 = SURFACE_STYLE_USAGE(.BOTH.,#6781);
+#6781 = SURFACE_SIDE_STYLE('',(#6782));
+#6782 = SURFACE_STYLE_FILL_AREA(#6783);
+#6783 = FILL_AREA_STYLE('',(#6784));
+#6784 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6785 = STYLED_ITEM('color',(#6786),#4946);
+#6786 = PRESENTATION_STYLE_ASSIGNMENT((#6787));
+#6787 = SURFACE_STYLE_USAGE(.BOTH.,#6788);
+#6788 = SURFACE_SIDE_STYLE('',(#6789));
+#6789 = SURFACE_STYLE_FILL_AREA(#6790);
+#6790 = FILL_AREA_STYLE('',(#6791));
+#6791 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6792 = STYLED_ITEM('color',(#6793),#4963);
+#6793 = PRESENTATION_STYLE_ASSIGNMENT((#6794));
+#6794 = SURFACE_STYLE_USAGE(.BOTH.,#6795);
+#6795 = SURFACE_SIDE_STYLE('',(#6796));
+#6796 = SURFACE_STYLE_FILL_AREA(#6797);
+#6797 = FILL_AREA_STYLE('',(#6798));
+#6798 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6799 = STYLED_ITEM('color',(#6800),#4975);
+#6800 = PRESENTATION_STYLE_ASSIGNMENT((#6801));
+#6801 = SURFACE_STYLE_USAGE(.BOTH.,#6802);
+#6802 = SURFACE_SIDE_STYLE('',(#6803));
+#6803 = SURFACE_STYLE_FILL_AREA(#6804);
+#6804 = FILL_AREA_STYLE('',(#6805));
+#6805 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6806 = STYLED_ITEM('color',(#6807),#4992);
+#6807 = PRESENTATION_STYLE_ASSIGNMENT((#6808));
+#6808 = SURFACE_STYLE_USAGE(.BOTH.,#6809);
+#6809 = SURFACE_SIDE_STYLE('',(#6810));
+#6810 = SURFACE_STYLE_FILL_AREA(#6811);
+#6811 = FILL_AREA_STYLE('',(#6812));
+#6812 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6813 = STYLED_ITEM('color',(#6814),#5004);
+#6814 = PRESENTATION_STYLE_ASSIGNMENT((#6815));
+#6815 = SURFACE_STYLE_USAGE(.BOTH.,#6816);
+#6816 = SURFACE_SIDE_STYLE('',(#6817));
+#6817 = SURFACE_STYLE_FILL_AREA(#6818);
+#6818 = FILL_AREA_STYLE('',(#6819));
+#6819 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6820 = STYLED_ITEM('color',(#6821),#5021);
+#6821 = PRESENTATION_STYLE_ASSIGNMENT((#6822));
+#6822 = SURFACE_STYLE_USAGE(.BOTH.,#6823);
+#6823 = SURFACE_SIDE_STYLE('',(#6824));
+#6824 = SURFACE_STYLE_FILL_AREA(#6825);
+#6825 = FILL_AREA_STYLE('',(#6826));
+#6826 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6827 = STYLED_ITEM('color',(#6828),#5033);
+#6828 = PRESENTATION_STYLE_ASSIGNMENT((#6829));
+#6829 = SURFACE_STYLE_USAGE(.BOTH.,#6830);
+#6830 = SURFACE_SIDE_STYLE('',(#6831));
+#6831 = SURFACE_STYLE_FILL_AREA(#6832);
+#6832 = FILL_AREA_STYLE('',(#6833));
+#6833 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6834 = STYLED_ITEM('color',(#6835),#5050);
+#6835 = PRESENTATION_STYLE_ASSIGNMENT((#6836));
+#6836 = SURFACE_STYLE_USAGE(.BOTH.,#6837);
+#6837 = SURFACE_SIDE_STYLE('',(#6838));
+#6838 = SURFACE_STYLE_FILL_AREA(#6839);
+#6839 = FILL_AREA_STYLE('',(#6840));
+#6840 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6841 = STYLED_ITEM('color',(#6842),#5062);
+#6842 = PRESENTATION_STYLE_ASSIGNMENT((#6843));
+#6843 = SURFACE_STYLE_USAGE(.BOTH.,#6844);
+#6844 = SURFACE_SIDE_STYLE('',(#6845));
+#6845 = SURFACE_STYLE_FILL_AREA(#6846);
+#6846 = FILL_AREA_STYLE('',(#6847));
+#6847 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6848 = STYLED_ITEM('color',(#6849),#5079);
+#6849 = PRESENTATION_STYLE_ASSIGNMENT((#6850));
+#6850 = SURFACE_STYLE_USAGE(.BOTH.,#6851);
+#6851 = SURFACE_SIDE_STYLE('',(#6852));
+#6852 = SURFACE_STYLE_FILL_AREA(#6853);
+#6853 = FILL_AREA_STYLE('',(#6854));
+#6854 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6855 = STYLED_ITEM('color',(#6856),#5091);
+#6856 = PRESENTATION_STYLE_ASSIGNMENT((#6857));
+#6857 = SURFACE_STYLE_USAGE(.BOTH.,#6858);
+#6858 = SURFACE_SIDE_STYLE('',(#6859));
+#6859 = SURFACE_STYLE_FILL_AREA(#6860);
+#6860 = FILL_AREA_STYLE('',(#6861));
+#6861 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6862 = STYLED_ITEM('color',(#6863),#5108);
+#6863 = PRESENTATION_STYLE_ASSIGNMENT((#6864));
+#6864 = SURFACE_STYLE_USAGE(.BOTH.,#6865);
+#6865 = SURFACE_SIDE_STYLE('',(#6866));
+#6866 = SURFACE_STYLE_FILL_AREA(#6867);
+#6867 = FILL_AREA_STYLE('',(#6868));
+#6868 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6869 = STYLED_ITEM('color',(#6870),#5120);
+#6870 = PRESENTATION_STYLE_ASSIGNMENT((#6871));
+#6871 = SURFACE_STYLE_USAGE(.BOTH.,#6872);
+#6872 = SURFACE_SIDE_STYLE('',(#6873));
+#6873 = SURFACE_STYLE_FILL_AREA(#6874);
+#6874 = FILL_AREA_STYLE('',(#6875));
+#6875 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6876 = STYLED_ITEM('color',(#6877),#5137);
+#6877 = PRESENTATION_STYLE_ASSIGNMENT((#6878));
+#6878 = SURFACE_STYLE_USAGE(.BOTH.,#6879);
+#6879 = SURFACE_SIDE_STYLE('',(#6880));
+#6880 = SURFACE_STYLE_FILL_AREA(#6881);
+#6881 = FILL_AREA_STYLE('',(#6882));
+#6882 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6883 = STYLED_ITEM('color',(#6884),#5149);
+#6884 = PRESENTATION_STYLE_ASSIGNMENT((#6885));
+#6885 = SURFACE_STYLE_USAGE(.BOTH.,#6886);
+#6886 = SURFACE_SIDE_STYLE('',(#6887));
+#6887 = SURFACE_STYLE_FILL_AREA(#6888);
+#6888 = FILL_AREA_STYLE('',(#6889));
+#6889 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6890 = STYLED_ITEM('color',(#6891),#5166);
+#6891 = PRESENTATION_STYLE_ASSIGNMENT((#6892));
+#6892 = SURFACE_STYLE_USAGE(.BOTH.,#6893);
+#6893 = SURFACE_SIDE_STYLE('',(#6894));
+#6894 = SURFACE_STYLE_FILL_AREA(#6895);
+#6895 = FILL_AREA_STYLE('',(#6896));
+#6896 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6897 = STYLED_ITEM('color',(#6898),#5178);
+#6898 = PRESENTATION_STYLE_ASSIGNMENT((#6899));
+#6899 = SURFACE_STYLE_USAGE(.BOTH.,#6900);
+#6900 = SURFACE_SIDE_STYLE('',(#6901));
+#6901 = SURFACE_STYLE_FILL_AREA(#6902);
+#6902 = FILL_AREA_STYLE('',(#6903));
+#6903 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6904 = STYLED_ITEM('color',(#6905),#5195);
+#6905 = PRESENTATION_STYLE_ASSIGNMENT((#6906));
+#6906 = SURFACE_STYLE_USAGE(.BOTH.,#6907);
+#6907 = SURFACE_SIDE_STYLE('',(#6908));
+#6908 = SURFACE_STYLE_FILL_AREA(#6909);
+#6909 = FILL_AREA_STYLE('',(#6910));
+#6910 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6911 = STYLED_ITEM('color',(#6912),#5207);
+#6912 = PRESENTATION_STYLE_ASSIGNMENT((#6913));
+#6913 = SURFACE_STYLE_USAGE(.BOTH.,#6914);
+#6914 = SURFACE_SIDE_STYLE('',(#6915));
+#6915 = SURFACE_STYLE_FILL_AREA(#6916);
+#6916 = FILL_AREA_STYLE('',(#6917));
+#6917 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6918 = STYLED_ITEM('color',(#6919),#5224);
+#6919 = PRESENTATION_STYLE_ASSIGNMENT((#6920));
+#6920 = SURFACE_STYLE_USAGE(.BOTH.,#6921);
+#6921 = SURFACE_SIDE_STYLE('',(#6922));
+#6922 = SURFACE_STYLE_FILL_AREA(#6923);
+#6923 = FILL_AREA_STYLE('',(#6924));
+#6924 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6925 = STYLED_ITEM('color',(#6926),#5236);
+#6926 = PRESENTATION_STYLE_ASSIGNMENT((#6927));
+#6927 = SURFACE_STYLE_USAGE(.BOTH.,#6928);
+#6928 = SURFACE_SIDE_STYLE('',(#6929));
+#6929 = SURFACE_STYLE_FILL_AREA(#6930);
+#6930 = FILL_AREA_STYLE('',(#6931));
+#6931 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6932 = STYLED_ITEM('color',(#6933),#5253);
+#6933 = PRESENTATION_STYLE_ASSIGNMENT((#6934));
+#6934 = SURFACE_STYLE_USAGE(.BOTH.,#6935);
+#6935 = SURFACE_SIDE_STYLE('',(#6936));
+#6936 = SURFACE_STYLE_FILL_AREA(#6937);
+#6937 = FILL_AREA_STYLE('',(#6938));
+#6938 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6939 = STYLED_ITEM('color',(#6940),#5265);
+#6940 = PRESENTATION_STYLE_ASSIGNMENT((#6941));
+#6941 = SURFACE_STYLE_USAGE(.BOTH.,#6942);
+#6942 = SURFACE_SIDE_STYLE('',(#6943));
+#6943 = SURFACE_STYLE_FILL_AREA(#6944);
+#6944 = FILL_AREA_STYLE('',(#6945));
+#6945 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6946 = STYLED_ITEM('color',(#6947),#5282);
+#6947 = PRESENTATION_STYLE_ASSIGNMENT((#6948));
+#6948 = SURFACE_STYLE_USAGE(.BOTH.,#6949);
+#6949 = SURFACE_SIDE_STYLE('',(#6950));
+#6950 = SURFACE_STYLE_FILL_AREA(#6951);
+#6951 = FILL_AREA_STYLE('',(#6952));
+#6952 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6953 = STYLED_ITEM('color',(#6954),#5294);
+#6954 = PRESENTATION_STYLE_ASSIGNMENT((#6955));
+#6955 = SURFACE_STYLE_USAGE(.BOTH.,#6956);
+#6956 = SURFACE_SIDE_STYLE('',(#6957));
+#6957 = SURFACE_STYLE_FILL_AREA(#6958);
+#6958 = FILL_AREA_STYLE('',(#6959));
+#6959 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6960 = STYLED_ITEM('color',(#6961),#5311);
+#6961 = PRESENTATION_STYLE_ASSIGNMENT((#6962));
+#6962 = SURFACE_STYLE_USAGE(.BOTH.,#6963);
+#6963 = SURFACE_SIDE_STYLE('',(#6964));
+#6964 = SURFACE_STYLE_FILL_AREA(#6965);
+#6965 = FILL_AREA_STYLE('',(#6966));
+#6966 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6967 = STYLED_ITEM('color',(#6968),#5328);
+#6968 = PRESENTATION_STYLE_ASSIGNMENT((#6969));
+#6969 = SURFACE_STYLE_USAGE(.BOTH.,#6970);
+#6970 = SURFACE_SIDE_STYLE('',(#6971));
+#6971 = SURFACE_STYLE_FILL_AREA(#6972);
+#6972 = FILL_AREA_STYLE('',(#6973));
+#6973 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6974 = STYLED_ITEM('color',(#6975),#5345);
+#6975 = PRESENTATION_STYLE_ASSIGNMENT((#6976));
+#6976 = SURFACE_STYLE_USAGE(.BOTH.,#6977);
+#6977 = SURFACE_SIDE_STYLE('',(#6978));
+#6978 = SURFACE_STYLE_FILL_AREA(#6979);
+#6979 = FILL_AREA_STYLE('',(#6980));
+#6980 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6981 = STYLED_ITEM('color',(#6982),#5362);
+#6982 = PRESENTATION_STYLE_ASSIGNMENT((#6983));
+#6983 = SURFACE_STYLE_USAGE(.BOTH.,#6984);
+#6984 = SURFACE_SIDE_STYLE('',(#6985));
+#6985 = SURFACE_STYLE_FILL_AREA(#6986);
+#6986 = FILL_AREA_STYLE('',(#6987));
+#6987 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6988 = STYLED_ITEM('color',(#6989),#5379);
+#6989 = PRESENTATION_STYLE_ASSIGNMENT((#6990));
+#6990 = SURFACE_STYLE_USAGE(.BOTH.,#6991);
+#6991 = SURFACE_SIDE_STYLE('',(#6992));
+#6992 = SURFACE_STYLE_FILL_AREA(#6993);
+#6993 = FILL_AREA_STYLE('',(#6994));
+#6994 = FILL_AREA_STYLE_COLOUR('',#5999);
+#6995 = STYLED_ITEM('color',(#6996),#5396);
+#6996 = PRESENTATION_STYLE_ASSIGNMENT((#6997));
+#6997 = SURFACE_STYLE_USAGE(.BOTH.,#6998);
+#6998 = SURFACE_SIDE_STYLE('',(#6999));
+#6999 = SURFACE_STYLE_FILL_AREA(#7000);
+#7000 = FILL_AREA_STYLE('',(#7001));
+#7001 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7002 = STYLED_ITEM('color',(#7003),#5413);
+#7003 = PRESENTATION_STYLE_ASSIGNMENT((#7004));
+#7004 = SURFACE_STYLE_USAGE(.BOTH.,#7005);
+#7005 = SURFACE_SIDE_STYLE('',(#7006));
+#7006 = SURFACE_STYLE_FILL_AREA(#7007);
+#7007 = FILL_AREA_STYLE('',(#7008));
+#7008 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7009 = STYLED_ITEM('color',(#7010),#5430);
+#7010 = PRESENTATION_STYLE_ASSIGNMENT((#7011));
+#7011 = SURFACE_STYLE_USAGE(.BOTH.,#7012);
+#7012 = SURFACE_SIDE_STYLE('',(#7013));
+#7013 = SURFACE_STYLE_FILL_AREA(#7014);
+#7014 = FILL_AREA_STYLE('',(#7015));
+#7015 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7016 = STYLED_ITEM('color',(#7017),#5447);
+#7017 = PRESENTATION_STYLE_ASSIGNMENT((#7018));
+#7018 = SURFACE_STYLE_USAGE(.BOTH.,#7019);
+#7019 = SURFACE_SIDE_STYLE('',(#7020));
+#7020 = SURFACE_STYLE_FILL_AREA(#7021);
+#7021 = FILL_AREA_STYLE('',(#7022));
+#7022 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7023 = STYLED_ITEM('color',(#7024),#5464);
+#7024 = PRESENTATION_STYLE_ASSIGNMENT((#7025));
+#7025 = SURFACE_STYLE_USAGE(.BOTH.,#7026);
+#7026 = SURFACE_SIDE_STYLE('',(#7027));
+#7027 = SURFACE_STYLE_FILL_AREA(#7028);
+#7028 = FILL_AREA_STYLE('',(#7029));
+#7029 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7030 = STYLED_ITEM('color',(#7031),#5481);
+#7031 = PRESENTATION_STYLE_ASSIGNMENT((#7032));
+#7032 = SURFACE_STYLE_USAGE(.BOTH.,#7033);
+#7033 = SURFACE_SIDE_STYLE('',(#7034));
+#7034 = SURFACE_STYLE_FILL_AREA(#7035);
+#7035 = FILL_AREA_STYLE('',(#7036));
+#7036 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7037 = STYLED_ITEM('color',(#7038),#5498);
+#7038 = PRESENTATION_STYLE_ASSIGNMENT((#7039));
+#7039 = SURFACE_STYLE_USAGE(.BOTH.,#7040);
+#7040 = SURFACE_SIDE_STYLE('',(#7041));
+#7041 = SURFACE_STYLE_FILL_AREA(#7042);
+#7042 = FILL_AREA_STYLE('',(#7043));
+#7043 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7044 = STYLED_ITEM('color',(#7045),#5515);
+#7045 = PRESENTATION_STYLE_ASSIGNMENT((#7046));
+#7046 = SURFACE_STYLE_USAGE(.BOTH.,#7047);
+#7047 = SURFACE_SIDE_STYLE('',(#7048));
+#7048 = SURFACE_STYLE_FILL_AREA(#7049);
+#7049 = FILL_AREA_STYLE('',(#7050));
+#7050 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7051 = STYLED_ITEM('color',(#7052),#5532);
+#7052 = PRESENTATION_STYLE_ASSIGNMENT((#7053));
+#7053 = SURFACE_STYLE_USAGE(.BOTH.,#7054);
+#7054 = SURFACE_SIDE_STYLE('',(#7055));
+#7055 = SURFACE_STYLE_FILL_AREA(#7056);
+#7056 = FILL_AREA_STYLE('',(#7057));
+#7057 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7058 = STYLED_ITEM('color',(#7059),#5549);
+#7059 = PRESENTATION_STYLE_ASSIGNMENT((#7060));
+#7060 = SURFACE_STYLE_USAGE(.BOTH.,#7061);
+#7061 = SURFACE_SIDE_STYLE('',(#7062));
+#7062 = SURFACE_STYLE_FILL_AREA(#7063);
+#7063 = FILL_AREA_STYLE('',(#7064));
+#7064 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7065 = STYLED_ITEM('color',(#7066),#5561);
+#7066 = PRESENTATION_STYLE_ASSIGNMENT((#7067));
+#7067 = SURFACE_STYLE_USAGE(.BOTH.,#7068);
+#7068 = SURFACE_SIDE_STYLE('',(#7069));
+#7069 = SURFACE_STYLE_FILL_AREA(#7070);
+#7070 = FILL_AREA_STYLE('',(#7071));
+#7071 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7072 = STYLED_ITEM('color',(#7073),#5578);
+#7073 = PRESENTATION_STYLE_ASSIGNMENT((#7074));
+#7074 = SURFACE_STYLE_USAGE(.BOTH.,#7075);
+#7075 = SURFACE_SIDE_STYLE('',(#7076));
+#7076 = SURFACE_STYLE_FILL_AREA(#7077);
+#7077 = FILL_AREA_STYLE('',(#7078));
+#7078 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7079 = STYLED_ITEM('color',(#7080),#5590);
+#7080 = PRESENTATION_STYLE_ASSIGNMENT((#7081));
+#7081 = SURFACE_STYLE_USAGE(.BOTH.,#7082);
+#7082 = SURFACE_SIDE_STYLE('',(#7083));
+#7083 = SURFACE_STYLE_FILL_AREA(#7084);
+#7084 = FILL_AREA_STYLE('',(#7085));
+#7085 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7086 = STYLED_ITEM('color',(#7087),#5607);
+#7087 = PRESENTATION_STYLE_ASSIGNMENT((#7088));
+#7088 = SURFACE_STYLE_USAGE(.BOTH.,#7089);
+#7089 = SURFACE_SIDE_STYLE('',(#7090));
+#7090 = SURFACE_STYLE_FILL_AREA(#7091);
+#7091 = FILL_AREA_STYLE('',(#7092));
+#7092 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7093 = STYLED_ITEM('color',(#7094),#5619);
+#7094 = PRESENTATION_STYLE_ASSIGNMENT((#7095));
+#7095 = SURFACE_STYLE_USAGE(.BOTH.,#7096);
+#7096 = SURFACE_SIDE_STYLE('',(#7097));
+#7097 = SURFACE_STYLE_FILL_AREA(#7098);
+#7098 = FILL_AREA_STYLE('',(#7099));
+#7099 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7100 = STYLED_ITEM('color',(#7101),#5636);
+#7101 = PRESENTATION_STYLE_ASSIGNMENT((#7102));
+#7102 = SURFACE_STYLE_USAGE(.BOTH.,#7103);
+#7103 = SURFACE_SIDE_STYLE('',(#7104));
+#7104 = SURFACE_STYLE_FILL_AREA(#7105);
+#7105 = FILL_AREA_STYLE('',(#7106));
+#7106 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7107 = STYLED_ITEM('color',(#7108),#5648);
+#7108 = PRESENTATION_STYLE_ASSIGNMENT((#7109));
+#7109 = SURFACE_STYLE_USAGE(.BOTH.,#7110);
+#7110 = SURFACE_SIDE_STYLE('',(#7111));
+#7111 = SURFACE_STYLE_FILL_AREA(#7112);
+#7112 = FILL_AREA_STYLE('',(#7113));
+#7113 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7114 = STYLED_ITEM('color',(#7115),#5665);
+#7115 = PRESENTATION_STYLE_ASSIGNMENT((#7116));
+#7116 = SURFACE_STYLE_USAGE(.BOTH.,#7117);
+#7117 = SURFACE_SIDE_STYLE('',(#7118));
+#7118 = SURFACE_STYLE_FILL_AREA(#7119);
+#7119 = FILL_AREA_STYLE('',(#7120));
+#7120 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7121 = STYLED_ITEM('color',(#7122),#5677);
+#7122 = PRESENTATION_STYLE_ASSIGNMENT((#7123));
+#7123 = SURFACE_STYLE_USAGE(.BOTH.,#7124);
+#7124 = SURFACE_SIDE_STYLE('',(#7125));
+#7125 = SURFACE_STYLE_FILL_AREA(#7126);
+#7126 = FILL_AREA_STYLE('',(#7127));
+#7127 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7128 = STYLED_ITEM('color',(#7129),#5694);
+#7129 = PRESENTATION_STYLE_ASSIGNMENT((#7130));
+#7130 = SURFACE_STYLE_USAGE(.BOTH.,#7131);
+#7131 = SURFACE_SIDE_STYLE('',(#7132));
+#7132 = SURFACE_STYLE_FILL_AREA(#7133);
+#7133 = FILL_AREA_STYLE('',(#7134));
+#7134 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7135 = STYLED_ITEM('color',(#7136),#5706);
+#7136 = PRESENTATION_STYLE_ASSIGNMENT((#7137));
+#7137 = SURFACE_STYLE_USAGE(.BOTH.,#7138);
+#7138 = SURFACE_SIDE_STYLE('',(#7139));
+#7139 = SURFACE_STYLE_FILL_AREA(#7140);
+#7140 = FILL_AREA_STYLE('',(#7141));
+#7141 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7142 = STYLED_ITEM('color',(#7143),#5723);
+#7143 = PRESENTATION_STYLE_ASSIGNMENT((#7144));
+#7144 = SURFACE_STYLE_USAGE(.BOTH.,#7145);
+#7145 = SURFACE_SIDE_STYLE('',(#7146));
+#7146 = SURFACE_STYLE_FILL_AREA(#7147);
+#7147 = FILL_AREA_STYLE('',(#7148));
+#7148 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7149 = STYLED_ITEM('color',(#7150),#5735);
+#7150 = PRESENTATION_STYLE_ASSIGNMENT((#7151));
+#7151 = SURFACE_STYLE_USAGE(.BOTH.,#7152);
+#7152 = SURFACE_SIDE_STYLE('',(#7153));
+#7153 = SURFACE_STYLE_FILL_AREA(#7154);
+#7154 = FILL_AREA_STYLE('',(#7155));
+#7155 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7156 = STYLED_ITEM('color',(#7157),#5752);
+#7157 = PRESENTATION_STYLE_ASSIGNMENT((#7158));
+#7158 = SURFACE_STYLE_USAGE(.BOTH.,#7159);
+#7159 = SURFACE_SIDE_STYLE('',(#7160));
+#7160 = SURFACE_STYLE_FILL_AREA(#7161);
+#7161 = FILL_AREA_STYLE('',(#7162));
+#7162 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7163 = STYLED_ITEM('color',(#7164),#5764);
+#7164 = PRESENTATION_STYLE_ASSIGNMENT((#7165));
+#7165 = SURFACE_STYLE_USAGE(.BOTH.,#7166);
+#7166 = SURFACE_SIDE_STYLE('',(#7167));
+#7167 = SURFACE_STYLE_FILL_AREA(#7168);
+#7168 = FILL_AREA_STYLE('',(#7169));
+#7169 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7170 = STYLED_ITEM('color',(#7171),#5781);
+#7171 = PRESENTATION_STYLE_ASSIGNMENT((#7172));
+#7172 = SURFACE_STYLE_USAGE(.BOTH.,#7173);
+#7173 = SURFACE_SIDE_STYLE('',(#7174));
+#7174 = SURFACE_STYLE_FILL_AREA(#7175);
+#7175 = FILL_AREA_STYLE('',(#7176));
+#7176 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7177 = STYLED_ITEM('color',(#7178),#5793);
+#7178 = PRESENTATION_STYLE_ASSIGNMENT((#7179));
+#7179 = SURFACE_STYLE_USAGE(.BOTH.,#7180);
+#7180 = SURFACE_SIDE_STYLE('',(#7181));
+#7181 = SURFACE_STYLE_FILL_AREA(#7182);
+#7182 = FILL_AREA_STYLE('',(#7183));
+#7183 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7184 = STYLED_ITEM('color',(#7185),#5810);
+#7185 = PRESENTATION_STYLE_ASSIGNMENT((#7186));
+#7186 = SURFACE_STYLE_USAGE(.BOTH.,#7187);
+#7187 = SURFACE_SIDE_STYLE('',(#7188));
+#7188 = SURFACE_STYLE_FILL_AREA(#7189);
+#7189 = FILL_AREA_STYLE('',(#7190));
+#7190 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7191 = STYLED_ITEM('color',(#7192),#5822);
+#7192 = PRESENTATION_STYLE_ASSIGNMENT((#7193));
+#7193 = SURFACE_STYLE_USAGE(.BOTH.,#7194);
+#7194 = SURFACE_SIDE_STYLE('',(#7195));
+#7195 = SURFACE_STYLE_FILL_AREA(#7196);
+#7196 = FILL_AREA_STYLE('',(#7197));
+#7197 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7198 = STYLED_ITEM('color',(#7199),#5839);
+#7199 = PRESENTATION_STYLE_ASSIGNMENT((#7200));
+#7200 = SURFACE_STYLE_USAGE(.BOTH.,#7201);
+#7201 = SURFACE_SIDE_STYLE('',(#7202));
+#7202 = SURFACE_STYLE_FILL_AREA(#7203);
+#7203 = FILL_AREA_STYLE('',(#7204));
+#7204 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7205 = STYLED_ITEM('color',(#7206),#5851);
+#7206 = PRESENTATION_STYLE_ASSIGNMENT((#7207));
+#7207 = SURFACE_STYLE_USAGE(.BOTH.,#7208);
+#7208 = SURFACE_SIDE_STYLE('',(#7209));
+#7209 = SURFACE_STYLE_FILL_AREA(#7210);
+#7210 = FILL_AREA_STYLE('',(#7211));
+#7211 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7212 = STYLED_ITEM('color',(#7213),#5868);
+#7213 = PRESENTATION_STYLE_ASSIGNMENT((#7214));
+#7214 = SURFACE_STYLE_USAGE(.BOTH.,#7215);
+#7215 = SURFACE_SIDE_STYLE('',(#7216));
+#7216 = SURFACE_STYLE_FILL_AREA(#7217);
+#7217 = FILL_AREA_STYLE('',(#7218));
+#7218 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7219 = STYLED_ITEM('color',(#7220),#5880);
+#7220 = PRESENTATION_STYLE_ASSIGNMENT((#7221));
+#7221 = SURFACE_STYLE_USAGE(.BOTH.,#7222);
+#7222 = SURFACE_SIDE_STYLE('',(#7223));
+#7223 = SURFACE_STYLE_FILL_AREA(#7224);
+#7224 = FILL_AREA_STYLE('',(#7225));
+#7225 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7226 = STYLED_ITEM('color',(#7227),#5897);
+#7227 = PRESENTATION_STYLE_ASSIGNMENT((#7228));
+#7228 = SURFACE_STYLE_USAGE(.BOTH.,#7229);
+#7229 = SURFACE_SIDE_STYLE('',(#7230));
+#7230 = SURFACE_STYLE_FILL_AREA(#7231);
+#7231 = FILL_AREA_STYLE('',(#7232));
+#7232 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7233 = STYLED_ITEM('color',(#7234),#5909);
+#7234 = PRESENTATION_STYLE_ASSIGNMENT((#7235));
+#7235 = SURFACE_STYLE_USAGE(.BOTH.,#7236);
+#7236 = SURFACE_SIDE_STYLE('',(#7237));
+#7237 = SURFACE_STYLE_FILL_AREA(#7238);
+#7238 = FILL_AREA_STYLE('',(#7239));
+#7239 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7240 = STYLED_ITEM('color',(#7241),#5926);
+#7241 = PRESENTATION_STYLE_ASSIGNMENT((#7242));
+#7242 = SURFACE_STYLE_USAGE(.BOTH.,#7243);
+#7243 = SURFACE_SIDE_STYLE('',(#7244));
+#7244 = SURFACE_STYLE_FILL_AREA(#7245);
+#7245 = FILL_AREA_STYLE('',(#7246));
+#7246 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7247 = STYLED_ITEM('color',(#7248),#5938);
+#7248 = PRESENTATION_STYLE_ASSIGNMENT((#7249));
+#7249 = SURFACE_STYLE_USAGE(.BOTH.,#7250);
+#7250 = SURFACE_SIDE_STYLE('',(#7251));
+#7251 = SURFACE_STYLE_FILL_AREA(#7252);
+#7252 = FILL_AREA_STYLE('',(#7253));
+#7253 = FILL_AREA_STYLE_COLOUR('',#5999);
+#7254 = STYLED_ITEM('color',(#7255),#5951);
+#7255 = PRESENTATION_STYLE_ASSIGNMENT((#7256));
+#7256 = SURFACE_STYLE_USAGE(.BOTH.,#7257);
+#7257 = SURFACE_SIDE_STYLE('',(#7258));
+#7258 = SURFACE_STYLE_FILL_AREA(#7259);
+#7259 = FILL_AREA_STYLE('',(#7260));
+#7260 = FILL_AREA_STYLE_COLOUR('',#7261);
+#7261 = COLOUR_RGB('',0.690999984741,0.663999974728,0.597999989986);
+#7262 = STYLED_ITEM('color',(#7263),#5976);
+#7263 = PRESENTATION_STYLE_ASSIGNMENT((#7264));
+#7264 = SURFACE_STYLE_USAGE(.BOTH.,#7265);
+#7265 = SURFACE_SIDE_STYLE('',(#7266));
+#7266 = SURFACE_STYLE_FILL_AREA(#7267);
+#7267 = FILL_AREA_STYLE('',(#7268));
+#7268 = FILL_AREA_STYLE_COLOUR('',#7261);
+ENDSEC;
+END-ISO-10303-21;