component
BU18TD2WNVX-TL
Public Made by Adomby adom
ROHM Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-4-EP(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBU18TD2WNVX-TL
ROHM Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4-EP(1x1)
BU18TD2WNVX-TL from ROHM Semicon, in a DFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output voltage pin (1.0V to 3.4V versions, up to 200mA), needs a 0.47uF ceramic output capacitor (min 0.22uF) to GND. |
| 2 | GND | power_in | Ground pin; must be the minimum potential in the system. |
| 3 | STBY | input | ON/OFF control of output voltage: High (1.2V to 6.0V) is ON, Low (-0.3V to 0.3V) is OFF with output discharge active. |
| 4 | VIN | power_in | Power supply input, recommended operating range 1.7V to 6.0V, needs a 0.47uF ceramic input capacitor (min 0.22uF) to GND. |
| 5 | FIN | passive | Exposed substrate pad on the bottom (reverse FIN), connect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | DFN-4-EP(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
BU18TD2WNVX-TL - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
bu18td2wnvx-tl-etched.step/bu18td2wnvx-tl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bu18td2wnvx-tl.step/bu18td2wnvx-tl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (43 pp, sha256
c49fc566d58b8b97, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).