BTS723GW

{
 "schema": "adom.pads/1",
 "slug": "bts723gw",
 "footprint": "SOIC-14_3.9x8.7mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -3.81
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "Vbb",
   "type": "power_in",
   "description": "Positive power supply voltage (Vbb), operating range 7.0 to 58 V. Multiple Vbb pins (1, 7, 8, 14) share the leadframe; wire for max simultaneous short-circuit currents from both channels and low thermal resistance.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "IN1",
   "type": "input",
   "description": "Input for channel 1: activates channel 1 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 kΩ input series resistor. Absolute max input voltage ±42 V DC; max input current ±2.0 mA DC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "ST1",
   "type": "output",
   "description": "Diagnostic feedback for channel 1: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current ±2.0 mA DC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "GND",
   "type": "power_in",
   "description": "Logic ground. Independent from load ground. External current-limit resistor (150 Ω recommended) advised for Vbb > Vbb(AZ).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "ST2",
   "type": "output",
   "description": "Diagnostic feedback for channel 2: open-drain status output. Integrated pull-up via SPU pin; reports open-load (OFF state) and thermal shutdown (ON state). Max status current ±2.0 mA DC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "IN2",
   "type": "input",
   "description": "Input for channel 2: activates channel 2 on logic-high signal. CMOS-compatible, ground-referenced with integrated 20 kΩ input series resistor. Absolute max input voltage ±42 V DC; max input current ±2.0 mA DC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "Vbb",
   "type": "power_in",
   "description": "Positive power supply voltage (Vbb), operating range 7.0 to 58 V. Shares leadframe with pins 1, 8, 14.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "Vbb",
   "type": "power_in",
   "description": "Positive power supply voltage (Vbb), operating range 7.0 to 58 V. Shares leadframe with pins 1, 7, 14.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "OUT2",
   "type": "power_out",
   "description": "Protected high-side power output of channel 2. On-state resistance ~90 mΩ typ (each channel, Tj=25°C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 9 and 10 must be connected in parallel for spec operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "OUT2",
   "type": "power_out",
   "description": "Protected high-side power output of channel 2 (parallel with pin 9). Must be tied to pin 9.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "SPU",
   "type": "input",
   "description": "Status Pull-Up: connection for external pull-up voltage source (max ±42 V DC) for the open-drain ST1/ST2 status outputs. Pull-up resistors (~12 kΩ / 850 Ω network) are integrated internally.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "OUT1",
   "type": "power_out",
   "description": "Protected high-side power output of channel 1. On-state resistance ~90 mΩ typ (each channel, Tj=25°C); nominal load current 2.9 A (one channel active); current limitation 8 A. Pins 12 and 13 must be connected in parallel for spec operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "OUT1",
   "type": "power_out",
   "description": "Protected high-side power output of channel 1 (parallel with pin 12). Must be tied to pin 12.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "Vbb",
   "type": "power_in",
   "description": "Positive power supply voltage (Vbb), operating range 7.0 to 58 V. Shares leadframe with pins 1, 7, 8.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}