component
BTA06-600CRG
Public Made by Adomby adom
STMicroelectronics Thyristors (SCR)/Modules, TO-220AB. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBTA06-600CRG
STMicroelectronics · Thyristors (SCR)/Modules · TO-220AB
BTA06-600CRG from STMicroelectronics, in a TO-220AB. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | bidirectional | Anode 1 terminal rated for 6 A RMS at maximum voltage VDRM/VRRM of 600 V; conducts bidirectional current when triggered by gate signal. |
| 2 | A2 | bidirectional | Anode 2 terminal rated for 6 A RMS at maximum voltage VDRM/VRRM of 600 V; conducts bidirectional current when triggered by gate signal. |
| 3 | G | input | Gate trigger terminal; maximum trigger current of 25 mA at 12 V with 30 Ω load required to initiate conduction between A1 and A2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-220AB |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gate trigger current, quadrants I-II-III | IGT | 25 | mA | VD = 12 V, RL = 30 Ω, quadrants I-II-III, Tj = 25°C (C sensitivity column) | 2 | ||
| Gate trigger current, quadrant IV | IGT | 50 | mA | VD = 12 V, RL = 30 Ω, quadrant IV (C sensitivity column) | 2 | ||
| Gate trigger voltage, all quadrants | VGT | 1.3 | V | VD = 12 V, RL = 30 Ω | 2 | ||
| Gate non-trigger voltage | VGD | 0.2 | V | VD = VDRM, RL = 3.3 kΩ, Tj = 125°C | 2 | ||
| Holding current | IH | 25 | mA | IT = 500 mA | 2 | ||
| Latching current, quadrants I-III-IV | IL | 40 | mA | IG = 1.2 IGT, quadrants I-III-IV | 2 | ||
| Latching current, quadrant II | IL | 80 | mA | IG = 1.2 IGT, quadrant II | 2 | ||
| Critical rate of rise of off-state voltage | dV/dt | 200 | V/µs | VD = 67 %VDRM, gate open, Tj = 125°C | 2 | ||
| Critical rate of decrease of main current | (dV/dt)c | 5 | V/µs | (dI/dt)c = 2.7 A/ms, Tj = 125°C | 2 | ||
| On-state voltage | VTM | 1.55 | V | ITM = 8.5 A, tp = 380 µs, Tj = 25°C | 2 | ||
| Threshold voltage | Vt0 | 0.85 | V | Tj = 125°C | 2 | ||
| Dynamic resistance | Rd | 60 | mΩ | Tj = 125°C | 2 | ||
| Off-state leakage current | IDRM/IRRM | 5 | µA | VDRM = VRRM, Tj = 25°C | 2 | ||
| Off-state leakage current | IDRM/IRRM | 1 | mA | VDRM = VRRM, Tj = 125°C | 2 | ||
| Repetitive peak off-state voltage | VDRM/VRRM | 600 | V | Features table value for the 600 V variant | 1 | ||
| RMS on-state current (insulated TO-220AB) | IT(RMS) | 6 | A | Full sine wave, TO-220AB Ins., Tc = 105°C | 1 | ||
| Non repetitive surge peak on-state current | ITSM | 60 | A | F = 50 Hz, t = 20 ms, full cycle, Tj initial = 25°C | 1 | ||
| Non repetitive surge peak on-state current | ITSM | 63 | A | F = 60 Hz, t = 16.7 ms, full cycle, Tj initial = 25°C | 1 | ||
| I2t value for fusing | I²t | 21 | A²s | tp = 10 ms | 1 | ||
| Critical rate of rise of on-state current | dI/dt | 50 | A/µs | IG = 2 x IGT, tr ≤ 100 ns, F = 120 Hz, Tj = 125°C | 1 | ||
| Peak gate current | IGM | 4 | A | tp = 20 µs, Tj = 125°C | 1 | ||
| Average gate power dissipation | PG(AV) | 1 | W | Tj = 125°C | 1 | ||
| Storage junction temperature range | Tstg | -40 | 150 | °C | 1 | ||
| Operating junction temperature range | Tj | -40 | 125 | °C | 1 | ||
| Junction to case (AC), insulated | Rth(j-c) | 2.7 | °C/W | TO-220AB Insulated | 3 | ||
| Junction to ambient, insulated | Rth(j-a) | 60 | °C/W | TO-220AB Insulated | 3 |
CAD (KiCad official)
- Symbol:
BTA06-600CRG - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220AB (KiCad packages3D, STEP)
- 3D model files:
bta06-600crg-etched.step/bta06-600crg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bta06-600crg.step/bta06-600crg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (7 pp, sha256
b25b831364bc4c08, retrieved 2026-09-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).