BSP452

{
 "schema": "adom.pads/1",
 "slug": "bsp452",
 "footprint": "SOT-223",
 "generated_from": {
  "footprint": "SOT-223@sha256:49f22605ecc1fc70",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -3.15,
   -2.3
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-223@sha256:49f22605ecc1fc70"
 },
 "pad_count": 4,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    -2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "OUT",
   "type": "power_out",
   "description": "High-side switched output to the load. Connected to the drain-side of the internal N-channel power FET; RON ~0.16 Ω typ at Tj=25 °C, self-limited load current IL(SC) ~1.5 A typ, output clamps at Vbb-VON(CL) (~47 V typ) during inductive switch-off.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Logic (signal) ground reference for the device. A 150 Ω resistor in series with GND is required for reverse-battery protection and to limit GND current at supply voltages above Vbb(AZ).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "IN",
   "type": "input",
   "description": "CMOS-compatible logic input that activates the high-side power switch on a logical high signal. VIN(T+) max 3.5 V, VIN(T-) min 1.5 V, integrated series resistor RIN ~2.8 kΩ typ, allowable input range -3.0 V to Vbb (input current must not exceed ±5 mA).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.15,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.0,
    3.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "Vbb",
   "type": "power_in",
   "description": "Positive battery/power supply input. Operating range 5.0 V to 34 V, absolute max 40 V; undervoltage shutdown at 3.5-5 V, overvoltage shutdown at 34-42 V, internal overvoltage clamp Vbb(AZ) ≥41 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}