Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

BRCL4058ESE

Foshan Blue Rocket Elec · Battery Management · ESOP-8

BRCL4058ESE from Foshan Blue Rocket Elec, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TS input External NTC temperature-sense input; charging is paused when VTS falls outside the 45%×VDD to 80%×VDD window, and tying TS to GND disables battery temperature detection.
2 PROG passive Charge-current program pin; a 1% resistor to GND sets the charge current via RPROG(kΩ)=1180/IBAT(mA), with charge current up to 1.2 A.
3 GND power_in Chip ground.
4 VDD power_in Input supply from USB or AC adapter, 4.5 V to 6.0 V operating range; absolute maximum -0.3 V to 30 V, with input over-voltage protection at 6.9 V typical.
5 BAT power_out Charger output to the single-cell Li-ion battery, regulated to 4.2 V float voltage (4.158 V to 4.242 V); absolute maximum -0.3 V to 20 V.
6 STDBY output Open-drain full-charge indicator output, high impedance while charging and pulled low when the battery is full; absolute maximum -0.3 V to 30 V.
7 CHRG output Open-drain charge-in-progress indicator output, pulled low while charging; absolute maximum -0.3 V to 30 V.
8 CE input Charge enable input where high level (1.5 V to 5 V) shuts the charger down and low level (0.2 V max) enables operation; absolute maximum -0.3 V to 6 V, leave floating if unused.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Foshan Blue Rocket Elec
Package ESOP-8
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage -0.3 30 V 2
CHRG Pin Voltage VCHRG -0.3 30 V 2
STDBY Pin Voltage VSTDBY -0.3 30 V 2
TS Pin Voltage VTS -0.3 30 V 2
CE Pin Voltage VCE -0.3 6 V 2
PROG Pin Voltage VPROG -0.3 6 V 2
BAT Pin Voltage VBAT -0.3 20 V 2
Operating Ambient Temperature Range TA -40 85 °C 2
Junction Temperature TJ 150 °C 2
Storage Temperature Tstg -55 150 °C 2
Lead Temperature (Soldering) Tsolder 260 °C Soldering, 10s 2
ESD HBM 2000 V 2
Input Supply Voltage 4.5 5 6 V 3
Input Over-Voltage Protection Voltage Vovp 6.3 6.9 7.5 V VDD Rising 3
Trickle Charge Threshold VTRIKL 2.6 2.8 3 V VBAT Rising 3
Trickle Charge Current ITRIKL 45 66 85 mA VBAT<VTRIKL, RPROG=1.62 K 3
BAT Pin Current IBAT 657 730 803 mA VDD =5 V,RPROG=1.62 K, VBAT=3.95 V 3
PROG Pin Voltage VPROG 0.9 1 1.1 V VDD=5 V,RPROG=1.62 K 3
Regulated Output (Float) Voltage VFLOAT 4.158 4.2 4.242 V VDD=5V,RPROG=1.62 K 3
C/10 Termination Current Threshold ITERM 45 66 85 mA RPROG=1.62 K 3
Termination Comparator Filter Time tTerm 0.8 1.8 4 mS IBAT Falling Below ITERM 3
Recharge Comparator Filter Time tRECHARGE 0.8 1.8 4 mS VBAT High to Low 3
Input Supply Current, Charge Mode ICC 90 180 uA Charge Mode, RPROG=1.62 K 3
Input Supply Current, Standby Mode (Charge Terminated) ICC 60 120 uA Standby Mode (Charge Terminated) 3
Input Supply Current, Shutdown Mode ICC 60 120 uA Shutdown Mode: RPROG Not Connected, VDD<VBAT, or VDD<VUVL: CE=GND,OVP 3
BAT Pin Current, VDD Not Connected IBAT 0.5 3 uA VDD Not Connected, VBAT=4 V 3
External temperature too high detection threshold OTPH 43 45 %×VDD TS connected to NTC resistance 4
External temperature too low detection threshold OTPL 80 82 %×VDD TS connected to NTC resistance 4
CE high level (Shutdown Mode) VCEH 1.5 5 V 4

CAD (KiCad official)

  • Symbol: BRCL4058ESE
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: brcl4058ese-etched.step / brcl4058ese-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); brcl4058ese.step / brcl4058ese.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Foshan Blue Rocket Elec datasheet (10 pp, sha256 140acff60c2f6ffb, retrieved 2026-10-19, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF