component
BR24G04FJ-3GTE2
Public Made by Adomby adom
ROHM Semicon EEPROM, SOIC-8. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBR24G04FJ-3GTE2
ROHM Semicon · EEPROM · SOIC-8
BR24G04FJ-3GTE2 from ROHM Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Slave address setting bit 0; marked 'Don't use' per note (1); pin can be set to H, L, or Hi-Z. |
| 2 | SDA | bidirectional | Serial data line with open-drain output; outputs maximum 0.4V at 3.0mA sink current; accepts 0 to Vcc input. |
| 3 | A2 | input | Slave address setting bit 2; input accepts 0 to Vcc for device address configuration. |
| 4 | A1 | input | Slave address setting bit 1; input accepts 0 to Vcc for device address configuration. |
| 5 | VCC | power_in | Positive power supply connection; supply voltage 1.6V to 5.5V single power source. |
| 6 | SCL | input | Serial clock input for I2C bus operation; accepts 0 to Vcc level clock signals with pull-up resistor. |
| 7 | WP | input | Write protect input; when set to Vcc (HIGH) disables all address writes, when set to GND (LOW) enables writes. |
| 8 | GND | power_in | Ground reference voltage (0V); system ground for all inputs and outputs; must be lowest voltage in system. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
BR24G04FJ-3GTE2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
br24g04fj-3gte2-etched.step/br24g04fj-3gte2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);br24g04fj-3gte2.step/br24g04fj-3gte2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (36 pp, sha256
39b574eee8865142, retrieved 2026-09-29, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).