BQ7791500PWT

{
  "slug": "bq7791500pwt",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Battery Management ICs, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "bq7791500pwt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq7791500pwt.kicad_sym",
    "bq7791500pwt.kicad_mod",
    "bq7791500pwt.glb",
    "bq7791500pwt.step",
    "bq7791500pwt.lbr",
    "docs/hero.png",
    "docs/bq7791500pwt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq7791500pwt-hero.glb",
    "bq7791500pwt-hero.overlay.json",
    "bq7791500pwt-etched.glb"
  ],
  "component": {
    "mpn": "BQ7791500PWT",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Power Supply Chip",
    "subcategory": "Battery Management ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/bq7791500pwt.pdf",
    "parts": {
      "symbol": "bq7791500pwt.kicad_sym",
      "footprint": "bq7791500pwt.kicad_mod",
      "model_3d": "bq7791500pwt-hero.glb",
      "model_3d_plain": "bq7791500pwt-etched.glb",
      "model_3d_step": "bq7791500pwt-etched.step",
      "model_3d_step_plain": "bq7791500pwt.step",
      "lbr": "bq7791500pwt.lbr"
    },
    "distributor_links": {
      "lcsc": "C3682333"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T07:22:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage input; recommended operating range 3 V to 25 V, absolute maximum 36 V."
      },
      {
        "number": "2",
        "name": "AVDD",
        "type": "power_out",
        "description": "Analog supply output; connect only to a capacitor."
      },
      {
        "number": "3",
        "name": "VC5",
        "type": "input",
        "description": "Cell voltage sense input for the top cell; absolute maximum 36 V, and 0 to 5 V per cell relative to adjacent input."
      },
      {
        "number": "4",
        "name": "VC4",
        "type": "input",
        "description": "Cell voltage sense input; absolute maximum 36 V, and 0 to 5 V per cell relative to adjacent input."
      },
      {
        "number": "5",
        "name": "VC3",
        "type": "input",
        "description": "Cell voltage sense input; absolute maximum 36 V, and 0 to 5 V per cell relative to adjacent input."
      },
      {
        "number": "6",
        "name": "VC2",
        "type": "input",
        "description": "Cell voltage sense input; absolute maximum 36 V, and 0 to 5 V per cell relative to adjacent input."
      },
      {
        "number": "7",
        "name": "VC1",
        "type": "input",
        "description": "Cell voltage sense input; absolute maximum 36 V, and 0 to 5 V per cell relative to adjacent input."
      },
      {
        "number": "8",
        "name": "VC0",
        "type": "input",
        "description": "Cell voltage sense input for the bottom cell negative terminal; absolute maximum 3.6 V."
      },
      {
        "number": "9",
        "name": "VSS",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "10",
        "name": "SRP",
        "type": "input",
        "description": "Current sense input connecting to the battery side of the sense resistor; operating range -0.2 V to 0.8 V."
      },
      {
        "number": "11",
        "name": "SRN",
        "type": "input",
        "description": "Current sense input connecting to the pack side of the sense resistor; operating range -0.2 V to 0.8 V."
      },
      {
        "number": "12",
        "name": "DSG",
        "type": "output",
        "description": "DSG FET driver output; absolute maximum 20 V, operating output range 0 to 16 V."
      },
      {
        "number": "13",
        "name": "CHG",
        "type": "output",
        "description": "CHG FET driver output; absolute range -30 V to 20 V, operating output range 0 to 16 V."
      },
      {
        "number": "14",
        "name": "LD",
        "type": "input",
        "description": "PACK- load removal detection input; absolute range -30 V to 20 V, operating range 0 to 16 V."
      },
      {
        "number": "15",
        "name": "LPWR",
        "type": "output",
        "description": "HIBERNATE mode communication pin; connect to the PRES pin of the lower device in a stack, or leave floating for a single device."
      },
      {
        "number": "16",
        "name": "CBI",
        "type": "input",
        "description": "Cell balancing input; leave floating to disable balancing, drive low to enable, do not drive with an external supply, and in a stack connect to CBO of the immediate lower device."
      },
      {
        "number": "17",
        "name": "OCDP",
        "type": "input",
        "description": "A resistor to VSS programs the OCD1/2 fault detection delay; use a 10-MΩ resistor to VSS for the upper devices in a stack."
      },
      {
        "number": "18",
        "name": "TS",
        "type": "input",
        "description": "Thermistor measurement input; connect a 10-kΩ resistor to VSS if the function is not used."
      },
      {
        "number": "19",
        "name": "VTB",
        "type": "output",
        "description": "Thermistor bias output; operating range 0 to 3 V."
      },
      {
        "number": "20",
        "name": "CCFG",
        "type": "input",
        "description": "Cell in-series configuration input; operating range 0 to AVDD."
      },
      {
        "number": "21",
        "name": "CBO",
        "type": "output",
        "description": "Cell balancing output; connect through a 10-kΩ resistor to CBI of the upper device in a stack, or leave floating for a single device."
      },
      {
        "number": "22",
        "name": "PRES",
        "type": "input",
        "description": "HIBERNATE mode input; drive high for NORMAL mode, leave floating for HIBERNATE mode, and connect to LPWR of the upper device in a stack."
      },
      {
        "number": "23",
        "name": "CTRC",
        "type": "input",
        "description": "CHG and DSG override input; operating range 0 to VDD+5 V, absolute maximum 36 V, with 10-MΩ current limit resistor recommended."
      },
      {
        "number": "24",
        "name": "CTRD",
        "type": "input",
        "description": "CHG and DSG override input; operating range 0 to VDD+5 V, absolute maximum 36 V, with 10-MΩ current limit resistor recommended."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet lists CTRC and CTRD in a combined description cell ('CHG and DSG override inputs'); indivi"
        ],
        "pages_sent": 10,
        "cost_usd": 0.1357,
        "at": "2026-10-27T07:22:31"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/bq7791500pwt.pdf",
        "pages": 56,
        "sha256": "a4d8b11fe0446f32",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq7791500pwt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq7791500pwt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7162e96c2543a81eada29a6bbbfda2e15e00252627be3fe2a5fdfd98f3f1ed83",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}