component
BQ35100PWR
Public Made by Adomby adom
Texas Instruments Battery Management, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ35100PWR
Texas Instruments · Battery Management · TSSOP-14
BQ35100PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Optional voltage measurement input; use external scaling circuit for battery voltages exceeding 5 V. |
| 2 | ALERT | tri_state | Active low interrupt open-drain output; external pullup resistor required. |
| 3 | NC | unconnected | Not connected; pin must be connected to VSS. |
| 4 | BAT | power_in | Voltage measurement input accepting 0 to 5 V; can be left floating or tied to VSS if unused. |
| 5 | GE | input | Gauge enable input; internal LDO disconnects from REGIN when driven low. |
| 6 | REGIN | power_in | Internal LDO input accepting 2.7 to 4.5 V; decouple to VSS with 0.1-µF ceramic X5R capacitor. |
| 7 | REG25 | power_out | 2.5-V regulated output of internal LDO; decouple to VSS with 1-µF ceramic capacitor. |
| 8 | VSS | power_in | Device ground; 0 V reference. |
| 9 | SRP | input | Coulomb counter analog input (±0.125 V range) connected to sense resistor nearest BAT- terminal. |
| 10 | SRN | input | Coulomb counter analog input (±0.125 V range) connected to sense resistor nearest PACK- terminal. |
| 11 | TS | input | Pack thermistor voltage sense input for external 103AT NTC thermistor temperature measurement. |
| 12 | VEN | tri_state | Optional open-drain external voltage divider control output. |
| 13 | SCL | input | Slave I2C serial clock input; use 10-kΩ external pullup resistor (typical). |
| 14 | SDA | tri_state | Open-drain slave I2C serial data line; use 10-kΩ external pullup resistor (typical). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Power Management (PMIC) |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
BQ35100PWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
bq35100pwr-etched.step/bq35100pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq35100pwr.step/bq35100pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
bb4c508390c9dc6e, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).