BQ34Z100PWR-G1

{
 "schema": "adom.pads/1",
 "slug": "bq34z100pwr-g1",
 "footprint": "TSSOP-14_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -1.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "P2",
   "type": "output",
   "description": "LED 2 drive (multi-LED display mode) or unused. Tie to VSS when not driving an LED.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VEN",
   "type": "output",
   "description": "Active-high voltage translation enable output. Optionally switches the external BAT-divider on/off (typ 45 uA saved) when driving a series N-FET. Leave floating or tie to VSS if unused.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "P1",
   "type": "output",
   "description": "LED 1 drive; also used to drive the single LED in single-LED mode via an N-FET. Tie to VSS when not driving an LED.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "BAT",
   "type": "input",
   "description": "Translated battery-voltage sense input from the external resistor divider. VBAT abs-max 5.5 V; ADC input range VSS-0.125 V to 5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "CE",
   "type": "input",
   "description": "Chip Enable. Driving low disconnects the internal LDO from REGIN to place the device in shutdown.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "REGIN",
   "type": "power_in",
   "description": "Internal LDO regulator input, 2.45 V to 5.5 V (abs-max). Decouple with a 0.1-uF X5R ceramic to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "REG25",
   "type": "power_out",
   "description": "2.5-V (typ) output of the internal LDO, also the internal VCC rail. Decouple with a 1-uF (0.47-uF min) ceramic capacitor to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VSS",
   "type": "power_in",
   "description": "Device ground reference.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "SRP",
   "type": "input",
   "description": "Coulomb-counter positive analog input (nearest BAT-). Connects across the pack sense resistor with SRN; input range VSS-0.125 V to 0.125 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "SRN",
   "type": "input",
   "description": "Coulomb-counter negative analog input (nearest PACK-). Connects across the pack sense resistor with SRP; input range VSS-0.125 V to 0.125 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "P6/TS",
   "type": "input",
   "description": "Pack thermistor sense input; use a 103AT-type (10 kOhm at 25 degC) NTC. Input range VSS-0.05 V to 1 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "P5/HDQ",
   "type": "bidirectional",
   "description": "Open-drain HDQ single-wire slave communication line. Leave floating or tie to VSS if unused. Also usable as GPIO P5.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "P4/SCL",
   "type": "input",
   "description": "I2C-compatible slave serial clock input; use a 10-kOhm (typ) pull-up to VCC. Also functions as LED 4 drive in four-LED mode, or GPIO P4. Leave floating or tie to VSS if unused.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "P3/SDA",
   "type": "bidirectional",
   "description": "Open-drain I2C-compatible slave serial data line; use a 10-kOhm (typ) pull-up to VCC. Also functions as LED 3 drive in four-LED mode, or GPIO P3. Leave floating or tie to VSS if unused.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}