main
Ray Publish 0.1.1 dffccd8
{
  "slug": "bq29312pwr",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Battery Management, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "bq29312pwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq29312pwr.kicad_sym",
    "bq29312pwr.kicad_mod",
    "bq29312pwr.glb",
    "bq29312pwr.step",
    "bq29312pwr.lbr",
    "docs/hero.png",
    "docs/bq29312pwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq29312pwr-etched.step",
    "bq29312pwr-hero.glb",
    "bq29312pwr-hero.overlay.json"
  ],
  "component": {
    "mpn": "BQ29312PWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/lit/ds/symlink/bq29312.pdf",
    "parts": {
      "symbol": "bq29312pwr.kicad_sym",
      "footprint": "bq29312pwr.kicad_mod",
      "model_3d": "bq29312pwr-hero.glb",
      "model_3d_plain": "bq29312pwr.glb",
      "model_3d_step": "bq29312pwr-etched.step",
      "model_3d_step_plain": "bq29312pwr.step",
      "lbr": "bq29312pwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2876935",
      "digikey": "BQ29312PWR-ND",
      "mouser": "595-BQ29312PWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T15:27:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "BQ29312PWR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-BQ29312PWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BAT",
        "type": "power_in",
        "description": "Diode protected BAT+ terminal and primary power source."
      },
      {
        "number": "2",
        "name": "DSG",
        "type": "output",
        "description": "Push-pull output discharge FET gate drive."
      },
      {
        "number": "3",
        "name": "VC1",
        "type": "input",
        "description": "Sense voltage input terminal for most positive cell and balance current input for most positive cell."
      },
      {
        "number": "4",
        "name": "VC2",
        "type": "input",
        "description": "Sense voltage input terminal for second most positive cell, balance current input for second most positive cell and return balance current for most positive cell."
      },
      {
        "number": "5",
        "name": "VC3",
        "type": "input",
        "description": "Sense voltage input terminal for third most positive cell, balance current input for third most positive cell and return balance current for second most positive cell."
      },
      {
        "number": "6",
        "name": "VC4",
        "type": "input",
        "description": "Sense voltage input terminal for least positive cell, balance current input for least positive cell and return balance current for third most positive cell."
      },
      {
        "number": "7",
        "name": "VC5",
        "type": "input",
        "description": "Sense voltage input terminal for most negative cell, return balance current for least positive cell."
      },
      {
        "number": "8",
        "name": "SR1",
        "type": "input",
        "description": "Current sense positive terminal when charging relative to SR2."
      },
      {
        "number": "9",
        "name": "SR2",
        "type": "input",
        "description": "Current sense negative terminal when discharging relative to SR2 current sense terminal."
      },
      {
        "number": "10",
        "name": "WDI",
        "type": "input",
        "description": "Digital input that provides the timing clock for the OC and SC delays and also acts as the watchdog clock."
      },
      {
        "number": "11",
        "name": "CELL",
        "type": "output",
        "description": "Output of scaled value of the measured cell voltage."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Analog ground pin and negative pack terminal."
      },
      {
        "number": "13",
        "name": "SCLK",
        "type": "bidirectional",
        "description": "Open-drain bidirectional serial interface clock with internal 10 kΩ pull-up to V(REG)."
      },
      {
        "number": "14",
        "name": "SDATA",
        "type": "bidirectional",
        "description": "Open-drain bidirectional serial interface data with internal 10 kΩ pull-up to V(REG)."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to GND."
      },
      {
        "number": "16",
        "name": "XALERT",
        "type": "tri_state",
        "description": "Open-drain output used to indicate status register changes with internal 100 kΩ pull-up to V(REG)."
      },
      {
        "number": "17",
        "name": "TOUT",
        "type": "output",
        "description": "Provides thermistor bias current."
      },
      {
        "number": "18",
        "name": "REG",
        "type": "power_out",
        "description": "Integrated 3.3-V regulator output."
      },
      {
        "number": "19",
        "name": "SLEEP",
        "type": "input",
        "description": "This pin is pulled up to V(REG) internally; open or high level activates Sleep mode."
      },
      {
        "number": "20",
        "name": "CHG",
        "type": "output",
        "description": "Push-pull output charge FET gate drive."
      },
      {
        "number": "21",
        "name": "ZVCHG",
        "type": "output",
        "description": "The ZVCHG FET drive is connected here."
      },
      {
        "number": "22",
        "name": "PACK",
        "type": "power_in",
        "description": "PACK positive terminal and alternative power source."
      },
      {
        "number": "23",
        "name": "PMS",
        "type": "input",
        "description": "0-V charge configuration select pin; CHG terminal ON/OFF is determined by this pin."
      },
      {
        "number": "24",
        "name": "OD",
        "type": "tri_state",
        "description": "NCH FET open drain output."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 8,
        "cost_usd": 0.1336,
        "at": "2026-10-01T15:27:30"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/bq29312.pdf",
        "pages": 39,
        "sha256": "d4d1510be5e6af00",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq29312pwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq29312pwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "28c0558580503c9eecb8a413d1318a216e7539ab4d145e69a7eb825571a73afb",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "BQ29312PWR",
  "brief": "Texas Instruments Battery Management, TSSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-24",
      "Category": "Power Management (PMIC)",
      "Pins": "24"
    }
  },
  "discovery_triggers": [
    "bq29312pwr"
  ],
  "discovery_pitch": "BQ29312PWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}