← Commit history

Initial commit: component/bq25896rtwr

Ray ·9464ad163e ·
2 files changed +308
README.mdadded+62
@@ -0,0 +1,62 @@+# BQ25896RTWR++**Texas Instruments** · Battery Management · QFN-24-EP(4x4)++BQ25896RTWR from Texas Instruments, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBUS | power_in | Charger input voltage from 3.9 V to 14 V with integrated reverse blocking MOSFET; place 1 µF ceramic capacitor from VBUS to PGND as close as possible to IC. |+| 2 | PSEL | input | Power source selection input; high indicates USB host source with 500 mA default limit, low indicates adapter source with 3.25 A default limit. |+| 3 | PG | output | Open-drain active-low power good indicator; output low when VBUS is within 3.9 V to 14 V operating range above sleep threshold. |+| 4 | STAT | output | Open-drain charge status output; low during charge in progress, high when charge complete or disabled, blinks at 1 Hz when fault occurs. |+| 5 | SCL | input | I2C clock input; connect to logic rail via 10 kΩ pull-up resistor; supports up to 400 kHz fast mode operation. |+| 6 | SDA | bidirectional | I2C bidirectional data line; connect to logic rail via 10 kΩ pull-up resistor; slave address is 6BH with R/W bit. |+| 7 | INT | output | Open-drain interrupt output; sends active-low 256 µs pulse to host for status and fault reporting; connect via 10 kΩ pull-up resistor. |+| 8 | OTG | input | Boost mode enable input; activates USB OTG step-up converter to supply 4.55 V to 5.55 V adjustable output with maximum 2 A current. |+| 9 | CE | input | Active-low charge enable input; battery charging enabled when CHG_CONFIG = 1 and CE pin is low; pin must be actively pulled high or low. |+| 10 | ILIM | input | Analog input current limit control; sets maximum input current by regulating ILIM voltage at 0.8 V via external resistor or monitors proportional input current. |+| 11 | TS | input | Analog temperature sensor input; connect NTC thermistor (103AT recommended) for JEITA battery monitoring; suspends charging when temperature outside programmed thresholds. |+| 12 | QON | input | BATFET enable and reset control input; 1 sec low pulse exits shipping mode; 18 sec low pulse without VBUS triggers full system power reset; internal pull-up. |+| 13 | BAT | power_in | Positive battery terminal connection point operating 2.5 V to 4.6 V; integrated BATFET connects to SYS; requires 10 µF capacitor placed adjacent to pin. |+| 14 | BAT | power_in | Positive battery terminal connection point operating 2.5 V to 4.6 V; integrated BATFET connects to SYS; requires 10 µF capacitor placed adjacent to pin. |+| 15 | SYS | power_out | System power output regulated above minimum system voltage (default 3.5 V) from battery or buck converter; requires 20 µF output capacitor placed close to IC. |+| 16 | SYS | power_out | System power output regulated above minimum system voltage (default 3.5 V) from battery or buck converter; requires 20 µF output capacitor placed close to IC. |+| 17 | PGND | power_in | Power ground connection for high-current converter path; internally connected to LSFET source; connect directly to input/output capacitor grounds and single-point connection to analog ground. |+| 18 | PGND | power_in | Power ground connection for high-current converter path; internally connected to LSFET source; connect directly to input/output capacitor grounds and single-point connection to analog ground. |+| 19 | SW | passive | Switching node for buck converter LC output filter; internally connected to HSFET source and LSFET drain; requires 0.047 µF bootstrap capacitor to BTST. |+| 20 | SW | passive | Switching node for buck converter LC output filter; internally connected to HSFET source and LSFET drain; requires 0.047 µF bootstrap capacitor to BTST. |+| 21 | BTST | passive | Bootstrap supply node for high-side FET gate driver connected to bootstrap diode anode; requires 0.047 µF bootstrap capacitor between SW and BTST. |+| 22 | REGN | power_out | LDO output approximately 5 V for PWM gate drivers and TS pin bias with 50 mA current limit; requires 4.7 µF (≥10 V rating) ceramic capacitor to ground. |+| 23 | PMID | output | Intermediate power node connected to RBFET drain and HSFET drain; requires 1 µF capacitor to PGND with remaining input capacitance on PMID node. |+| 24 | NC | unconnected | No connection pin; should not be connected to any circuit signal or ground plane. |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | QFN-24-EP(4x4) |+| Category | Power Management (PMIC) |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `BQ25896RTWR`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm`+- 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `bq25896rtwr-etched.step` / `bq25896rtwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq25896rtwr.step` / `bq25896rtwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/bq25896) (65 pp, sha256 `0daf169500794ae6`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq25896rtwr-datasheet.pdf)
page.jsonadded+246
@@ -0,0 +1,246 @@+{+  "slug": "bq25896rtwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Battery Management, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "bq25896rtwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "bq25896rtwr.kicad_sym",+    "bq25896rtwr.kicad_mod",+    "bq25896rtwr.glb",+    "bq25896rtwr.step",+    "bq25896rtwr.lbr",+    "docs/hero.png",+    "docs/bq25896rtwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "BQ25896RTWR",+    "manufacturer": "Texas Instruments",+    "package": "QFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Power Management (PMIC)",+    "subcategory": "Battery Management",+    "datasheet": "https://www.ti.com/cn/lit/gpn/bq25896",+    "parts": {+      "symbol": "bq25896rtwr.kicad_sym",+      "footprint": "bq25896rtwr.kicad_mod",+      "model_3d": "bq25896rtwr-etched.glb",+      "model_3d_plain": "bq25896rtwr.glb",+      "model_3d_step": "bq25896rtwr-etched.step",+      "model_3d_step_plain": "bq25896rtwr.step",+      "lbr": "bq25896rtwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C181475"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBUS",+        "type": "power_in",+        "description": "Charger input voltage from 3.9 V to 14 V with integrated reverse blocking MOSFET; place 1 µF ceramic capacitor from VBUS to PGND as close as possible to IC."+      },+      {+        "number": "2",+        "name": "PSEL",+        "type": "input",+        "description": "Power source selection input; high indicates USB host source with 500 mA default limit, low indicates adapter source with 3.25 A default limit."+      },+      {+        "number": "3",+        "name": "PG",+        "type": "output",+        "description": "Open-drain active-low power good indicator; output low when VBUS is within 3.9 V to 14 V operating range above sleep threshold."+      },+      {+        "number": "4",+        "name": "STAT",+        "type": "output",+        "description": "Open-drain charge status output; low during charge in progress, high when charge complete or disabled, blinks at 1 Hz when fault occurs."+      },+      {+        "number": "5",+        "name": "SCL",+        "type": "input",+        "description": "I2C clock input; connect to logic rail via 10 kΩ pull-up resistor; supports up to 400 kHz fast mode operation."+      },+      {+        "number": "6",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C bidirectional data line; connect to logic rail via 10 kΩ pull-up resistor; slave address is 6BH with R/W bit."+      },+      {+        "number": "7",+        "name": "INT",+        "type": "output",+        "description": "Open-drain interrupt output; sends active-low 256 µs pulse to host for status and fault reporting; connect via 10 kΩ pull-up resistor."+      },+      {+        "number": "8",+        "name": "OTG",+        "type": "input",+        "description": "Boost mode enable input; activates USB OTG step-up converter to supply 4.55 V to 5.55 V adjustable output with maximum 2 A current."+      },+      {+        "number": "9",+        "name": "CE",+        "type": "input",+        "description": "Active-low charge enable input; battery charging enabled when CHG_CONFIG = 1 and CE pin is low; pin must be actively pulled high or low."+      },+      {+        "number": "10",+        "name": "ILIM",+        "type": "input",+        "description": "Analog input current limit control; sets maximum input current by regulating ILIM voltage at 0.8 V via external resistor or monitors proportional input current."+      },+      {+        "number": "11",+        "name": "TS",+        "type": "input",+        "description": "Analog temperature sensor input; connect NTC thermistor (103AT recommended) for JEITA battery monitoring; suspends charging when temperature outside programmed thresholds."+      },+      {+        "number": "12",+        "name": "QON",+        "type": "input",+        "description": "BATFET enable and reset control input; 1 sec low pulse exits shipping mode; 18 sec low pulse without VBUS triggers full system power reset; internal pull-up."+      },+      {+        "number": "13",+        "name": "BAT",+        "type": "power_in",+        "description": "Positive battery terminal connection point operating 2.5 V to 4.6 V; integrated BATFET connects to SYS; requires 10 µF capacitor placed adjacent to pin."+      },+      {+        "number": "14",+        "name": "BAT",+        "type": "power_in",+        "description": "Positive battery terminal connection point operating 2.5 V to 4.6 V; integrated BATFET connects to SYS; requires 10 µF capacitor placed adjacent to pin."+      },+      {+        "number": "15",+        "name": "SYS",+        "type": "power_out",+        "description": "System power output regulated above minimum system voltage (default 3.5 V) from battery or buck converter; requires 20 µF output capacitor placed close to IC."+      },+      {+        "number": "16",+        "name": "SYS",+        "type": "power_out",+        "description": "System power output regulated above minimum system voltage (default 3.5 V) from battery or buck converter; requires 20 µF output capacitor placed close to IC."+      },+      {+        "number": "17",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for high-current converter path; internally connected to LSFET source; connect directly to input/output capacitor grounds and single-point connection to analog ground."+      },+      {+        "number": "18",+        "name": "PGND",+        "type": "power_in",+        "description": "Power ground connection for high-current converter path; internally connected to LSFET source; connect directly to input/output capacitor grounds and single-point connection to analog ground."+      },+      {+        "number": "19",+        "name": "SW",+        "type": "passive",+        "description": "Switching node for buck converter LC output filter; internally connected to HSFET source and LSFET drain; requires 0.047 µF bootstrap capacitor to BTST."+      },+      {+        "number": "20",+        "name": "SW",+        "type": "passive",+        "description": "Switching node for buck converter LC output filter; internally connected to HSFET source and LSFET drain; requires 0.047 µF bootstrap capacitor to BTST."+      },+      {+        "number": "21",+        "name": "BTST",+        "type": "passive",+        "description": "Bootstrap supply node for high-side FET gate driver connected to bootstrap diode anode; requires 0.047 µF bootstrap capacitor between SW and BTST."+      },+      {+        "number": "22",+        "name": "REGN",+        "type": "power_out",+        "description": "LDO output approximately 5 V for PWM gate drivers and TS pin bias with 50 mA current limit; requires 4.7 µF (≥10 V rating) ceramic capacitor to ground."+      },+      {+        "number": "23",+        "name": "PMID",+        "type": "output",+        "description": "Intermediate power node connected to RBFET drain and HSFET drain; requires 1 µF capacitor to PGND with remaining input capacitance on PMID node."+      },+      {+        "number": "24",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection pin; should not be connected to any circuit signal or ground plane."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 65,+        "cost_usd": 0.6525,+        "at": "2026-09-23T03:05:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/bq25896",+        "pages": 65,+        "sha256": "0daf169500794ae6",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file