main
Ray Publish 0.1.1 a24bbff
{
  "schema_version": 1,
  "type": "component",
  "slug": "bq25895rtwr",
  "title": "BQ25895RTWR",
  "brief": "Texas Instruments Battery Management, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "bq25895rtwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BQ25895RTWR",
    "manufacturer": "Texas Instruments",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/bq25895",
    "parts": {
      "symbol": "bq25895rtwr.kicad_sym",
      "footprint": "bq25895rtwr.kicad_mod",
      "model_3d": "bq25895rtwr-hero.glb",
      "model_3d_plain": "bq25895rtwr.glb",
      "model_3d_step": "bq25895rtwr-etched.step",
      "model_3d_step_plain": "bq25895rtwr.step",
      "lbr": "bq25895rtwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C80200"
    },
    "pins": [
      {
        "number": "1",
        "name": "VBUS",
        "type": "power_in",
        "description": "Charger input voltage supporting 3.9V to 14V with internal reverse-blocking MOSFET to PMID."
      },
      {
        "number": "2",
        "name": "D+",
        "type": "bidirectional",
        "description": "Positive USB data line for charging port detection including DCD, BC1.2, and MaxCharge handshake."
      },
      {
        "number": "3",
        "name": "D–",
        "type": "bidirectional",
        "description": "Negative USB data line for charging port detection including DCD, BC1.2, and MaxCharge handshake."
      },
      {
        "number": "4",
        "name": "STAT",
        "type": "output",
        "description": "Open-drain charge status output: LOW for charging in progress, HIGH for complete or disabled."
      },
      {
        "number": "5",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input with 400 kHz fast mode support via 10kΩ pull-up resistor."
      },
      {
        "number": "6",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line with 400 kHz fast mode support via 10kΩ pull-up resistor."
      },
      {
        "number": "7",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output delivering 256µs active-low pulses on device status or fault events."
      },
      {
        "number": "8",
        "name": "OTG",
        "type": "input",
        "description": "Boost mode enable input: activates 4.5V-5.5V output when high with OTG_CONFIG=1 and VBUS absent."
      },
      {
        "number": "9",
        "name": "CE",
        "type": "input",
        "description": "Active-low charge enable input: enables battery charging when CHG_CONFIG=1 and CE pin is low."
      },
      {
        "number": "10",
        "name": "ILIM",
        "type": "input",
        "description": "Analog input for input current limit via external resistor with 0.8V regulation point."
      },
      {
        "number": "11",
        "name": "TS",
        "type": "input",
        "description": "Temperature qualification analog input for NTC thermistor (103AT-2 recommended) battery thermal management."
      },
      {
        "number": "12",
        "name": "QON",
        "type": "input",
        "description": "BATFET enable/reset control with internal pull-up: exits ship mode on low pulse or resets system power."
      },
      {
        "number": "13",
        "name": "BAT",
        "type": "power_in",
        "description": "Battery positive terminal connection with internal BATFET to SYS, requires 10µF ceramic capacitor."
      },
      {
        "number": "14",
        "name": "BAT",
        "type": "power_in",
        "description": "Battery positive terminal connection (second pad) with internal BATFET, requires 10µF capacitor."
      },
      {
        "number": "15",
        "name": "SYS",
        "type": "power_out",
        "description": "System power output regulated to 3.0V-3.7V minimum via BATFET, requires 20µF ceramic capacitor."
      },
      {
        "number": "16",
        "name": "SYS",
        "type": "power_out",
        "description": "System power output (second pad) regulated to 3.0V-3.7V minimum via BATFET."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for high-current converter node: LSFET source connection with single-point tie to analog GND."
      },
      {
        "number": "18",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground (second pad) for high-current converter with LSFET source connection."
      },
      {
        "number": "19",
        "name": "SW",
        "type": "passive",
        "description": "Switching node connected to output inductor: internal HSFET/LSFET connection with 47nF bootstrap capacitor to BTST."
      },
      {
        "number": "20",
        "name": "SW",
        "type": "passive",
        "description": "Switching node (second pad) connected to output inductor with internal HSFET/LSFET connection."
      },
      {
        "number": "21",
        "name": "BTST",
        "type": "power_out",
        "description": "Bootstrap supply for PWM high-side gate driver: boost diode anode with 47nF capacitor to SW."
      },
      {
        "number": "22",
        "name": "REGN",
        "type": "power_out",
        "description": "LDO regulator output 5V-6V supplying PWM gate drives and TS bias rail, requires 4.7µF/10V capacitor."
      },
      {
        "number": "23",
        "name": "PMID",
        "type": "power_out",
        "description": "Boost mode output 4.5V-5.5V at up to 3.1A from RBFET/HSFET drains for OTG charging."
      },
      {
        "number": "24",
        "name": "DSEL",
        "type": "output",
        "description": "Open-drain D+/D- multiplexer selection control: drives low during detection, high for MaxCharge, floats otherwise."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 65,
        "cost_usd": 0.7469,
        "at": "2026-09-22T22:42:53"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/bq25895",
        "pages": 65,
        "sha256": "9e00f1f30064dad8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq25895rtwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq25895rtwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "074de3cdea04e86cd53f9b02bbe8365c39466d8b4fbbc477adb9863747a0d559",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "QFN-24-EP(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bq25895rtwr"
  ],
  "discovery_pitch": "BQ25895RTWR (Texas Instruments) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq25895rtwr.kicad_sym",
    "bq25895rtwr.kicad_mod",
    "bq25895rtwr.glb",
    "bq25895rtwr.step",
    "bq25895rtwr.lbr",
    "docs/hero.png",
    "docs/bq25895rtwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq25895rtwr-etched.step",
    "bq25895rtwr-hero.glb",
    "bq25895rtwr-hero.overlay.json"
  ],
  "visibility": "public",
  "updated_at": "2026-09-24T18:03:25.828Z",
  "description": "Texas Instruments Battery Management, QFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}