BQ25606RGER

@@ -69,7 +69,7 @@       },       {         "number": "4",-        "name": "D\u2013",+        "name": "D–",         "type": "bidirectional",         "description": "Negative line of USB data pair for BC1.2 and nonstandard adapter detection to determine input current limit; voltage range -0.3V to 7V."       },@@ -89,7 +89,7 @@         "number": "7",         "name": "PG",         "type": "tri_state",-        "description": "Open-drain active-low power good indicator; outputs LOW when input voltage between UVLO and ACOV, above sleep threshold, and input current >30mA; requires 10k\u03a9 pull-up resistor."+        "description": "Open-drain active-low power good indicator; outputs LOW when input voltage between UVLO and ACOV, above sleep threshold, and input current >30mA; requires 10kΩ pull-up resistor."       },       {         "number": "8",@@ -107,7 +107,7 @@         "number": "10",         "name": "ICHG",         "type": "input",-        "description": "Analog input to set charge current limit via resistor to ground; ICHG = KICHG/RICHG with acceptable range 300mA to 3000mA and \u00b16% regulation accuracy."+        "description": "Analog input to set charge current limit via resistor to ground; ICHG = KICHG/RICHG with acceptable range 300mA to 3000mA and ±6% regulation accuracy."       },       {         "number": "11",@@ -119,13 +119,13 @@         "number": "12",         "name": "VSET",         "type": "input",-        "description": "Analog input to set default battery charge voltage via resistor pull-down to GND: >50k\u03a9 yields 4.208V, <500\u03a9 yields 4.352V, 5-25k\u03a9 yields 4.400V; regulation accuracy \u00b10.5%."+        "description": "Analog input to set default battery charge voltage via resistor pull-down to GND: >50kΩ yields 4.208V, <500Ω yields 4.352V, 5-25kΩ yields 4.400V; regulation accuracy ±0.5%."       },       {         "number": "13",         "name": "BAT",         "type": "power_in",-        "description": "Battery positive terminal connection point; internal current sensing resistor connected between SYS and BAT with 19.5m\u03a9 on-resistance; connect 10\u00b5F capacitor closely to pin."+        "description": "Battery positive terminal connection point; internal current sensing resistor connected between SYS and BAT with 19.5mΩ on-resistance; connect 10µF capacitor closely to pin."       },       {         "number": "14",@@ -137,7 +137,7 @@         "number": "15",         "name": "SYS",         "type": "power_out",-        "description": "Converter regulated output connection point maintaining system voltage typically 50mV above battery or clamped at 3.5V minimum; internal current sensing resistor between SYS and BAT; connect 20\u00b5F capacitor close to pin."+        "description": "Converter regulated output connection point maintaining system voltage typically 50mV above battery or clamped at 3.5V minimum; internal current sensing resistor between SYS and BAT; connect 20µF capacitor close to pin."       },       {         "number": "16",@@ -161,7 +161,7 @@         "number": "19",         "name": "SW",         "type": "passive",-        "description": "Switching node connecting to output inductor; internally connected to source of HSFET and drain of LSFET; connect 0.047\u00b5F bootstrap capacitor from SW to BTST; voltage range -2V to 16V."+        "description": "Switching node connecting to output inductor; internally connected to source of HSFET and drain of LSFET; connect 0.047µF bootstrap capacitor from SW to BTST; voltage range -2V to 16V."       },       {         "number": "20",@@ -173,31 +173,31 @@         "number": "21",         "name": "BTST",         "type": "power_in",-        "description": "Bootstrap voltage supply for high-side MOSFET gate drive; internally connected to bootstrap diode cathode; connect 0.047\u00b5F capacitor from SW to BTST; voltage range 0-22V absolute, -0.3 to 7V relative to SW."+        "description": "Bootstrap voltage supply for high-side MOSFET gate drive; internally connected to bootstrap diode cathode; connect 0.047µF capacitor from SW to BTST; voltage range 0-22V absolute, -0.3 to 7V relative to SW."       },       {         "number": "22",         "name": "REGN",         "type": "power_out",-        "description": "Regulated voltage output for gate drive and internal bias circuits; supplies bias rail to TS external resistors; output voltage 5.6-6.65V at 9V input or 4.6-4.9V at 5V input; connect 4.7\u00b5F (10V) ceramic capacitor close to IC."+        "description": "Regulated voltage output for gate drive and internal bias circuits; supplies bias rail to TS external resistors; output voltage 5.6-6.65V at 9V input or 4.6-4.9V at 5V input; connect 4.7µF (10V) ceramic capacitor close to IC."       },       {         "number": "23",         "name": "PMID",         "type": "passive",-        "description": "Power path mid-point node connected to drain of RBFET and HSFET in buck converter; connect 10\u00b5F ceramic capacitor between PMID and GND; voltage range -0.3V to 22V."+        "description": "Power path mid-point node connected to drain of RBFET and HSFET in buck converter; connect 10µF ceramic capacitor between PMID and GND; voltage range -0.3V to 22V."       },       {         "number": "24",         "name": "VBUS",         "type": "power_in",-        "description": "Charger input voltage from USB/adapter with operating range 3.9V to 13.5V and absolute maximum 22V; internal RBFET connected between VBUS and PMID; place 1\u00b5F ceramic capacitor from VBUS to GND close to IC."+        "description": "Charger input voltage from USB/adapter with operating range 3.9V to 13.5V and absolute maximum 22V; internal RBFET connected between VBUS and PMID; place 1µF ceramic capacitor from VBUS to GND close to IC."       },       {         "number": "25",         "name": "Thermal Pad",         "type": "power_in",-        "description": "Exposed pad providing electrical ground connection and low thermal impedance heat dissipation path from die to PCB ground plane; junction-to-board thermal resistance 9.2\u00b0C/W; must be soldered to ground with sufficient thermal vias."+        "description": "Exposed pad providing electrical ground connection and low thermal impedance heat dissipation path from die to PCB ground plane; junction-to-board thermal resistance 9.2°C/W; must be soldered to ground with sufficient thermal vias."       }     ],     "provenance": {@@ -232,6 +232,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq25606rger.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq25606rger-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "0e9765570927cdec89010d7de8ac0c65e44b2d2e18bcc5bd330c2c5c5d3969b1",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}