← Commit history
bq25176mdsgr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -68,19 +68,19 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input power connected to external DC supply; bypass with at least 1-\u03bcF capacitor to GND placed close to IC."+ "description": "Input power connected to external DC supply; bypass with at least 1-μF capacitor to GND placed close to IC." }, { "number": "2", "name": "ISET", "type": "input",- "description": "Programs device fast-charge current via external resistor to GND with range 30 k\u03a9 (10 mA) to 375 \u03a9 (800 mA) per ICHG = KISET/RISET."+ "description": "Programs device fast-charge current via external resistor to GND with range 30 kΩ (10 mA) to 375 Ω (800 mA) per ICHG = KISET/RISET." }, { "number": "3", "name": "BIAS", "type": "input",- "description": "Bias sense pin; connect external 10-k\u03a9 resistor to GND or use as charging disable pin by pulling to GND via external NMOS."+ "description": "Bias sense pin; connect external 10-kΩ resistor to GND or use as charging disable pin by pulling to GND via external NMOS." }, { "number": "4",@@ -98,19 +98,19 @@ "number": "6", "name": "/PG", "type": "output",- "description": "Open-drain power good output; pulls LOW when VIN > VIN_LOWV and VOUT + VSLEEPZ < VIN < VIN_OV via 10-k\u03a9 pull-up resistor."+ "description": "Open-drain power good output; pulls LOW when VIN > VIN_LOWV and VOUT + VSLEEPZ < VIN < VIN_OV via 10-kΩ pull-up resistor." }, { "number": "7", "name": "VSET", "type": "input",- "description": "Programs regulation voltage for OUT pin via pull-down resistor with valid range 18.2 k\u03a9 to 100 k\u03a9; \u00b11% tolerance with <200 ppm/\u00b0C temperature coefficient recommended."+ "description": "Programs regulation voltage for OUT pin via pull-down resistor with valid range 18.2 kΩ to 100 kΩ; ±1% tolerance with <200 ppm/°C temperature coefficient recommended." }, { "number": "8", "name": "OUT", "type": "power_out",- "description": "Battery connection pin; system load may be connected in parallel to battery; bypass with at least 1-\u03bcF capacitor to GND placed close to IC."+ "description": "Battery connection pin; system load may be connected in parallel to battery; bypass with at least 1-μF capacitor to GND placed close to IC." }, { "number": "9",@@ -151,6 +151,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25176mdsgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.02,+ 2.0,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "e6f38e58d4ec9d4ea2a96fdea67b157510960d1a0c527284656d739d8ff8eabb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25176mdsgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.02,+ 2.0,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "88514c53c157ac092621ba1c8518d8c3f1528d6f4dc5292cd922c44c1f63e553",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -136,7 +136,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq25176mdsgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.02,+ 2.0,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "e6f38e58d4ec9d4ea2a96fdea67b157510960d1a0c527284656d739d8ff8eabb",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq25176mdsgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 3.02,+ 2.0,+ 0.9+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "88514c53c157ac092621ba1c8518d8c3f1528d6f4dc5292cd922c44c1f63e553",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -183,4 +223,4 @@ "visibility": { "public": true }-}+}