component
BQ25060DQCR
Public Made by Adomby adom
Texas Instruments Battery Management, WSON-10-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+47@@ -0,0 +1,47 @@+# BQ25060DQCR++**Texas Instruments** · Battery Management · WSON-10-EP(2x3)++BQ25060DQCR from Texas Instruments, in a WSON-10-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Input power supply from USB or AC adapter, 4.4V to 10.2V operating range, 1.2A continuous maximum input current, with 10.5V over-voltage protection. |+| 2 | ISET | input | Current programming input, connect external 1kΩ to 10kΩ resistor to VSS to program input current limit between 100mA and 1A. |+| 3 | VSS | power_in | Ground terminal connected to thermal pad and ground plane. |+| 4 | LDO | power_out | Low dropout regulator output regulated to 4.9V (4.7V to 5.1V range), drives up to 50mA continuous output current. |+| 5 | TS | input | Battery NTC thermistor monitoring input for temperature sensing, default operating range 0°C to 45°C with hysteresis protection. |+| 6 | BAT | power_out | Battery connection output and sense input, sources 28-45mA precharge current when VBAT < 2.9V, up to 1.2A maximum continuous output. |+| 7 | EN | input | Enable control input selecting charger mode, drive high for disable/suspend, low for programmable current mode via ISET, float for USB500 mode. |+| 8 | CHG | tri_state | Charge status open-drain output pulled low during charging phases, high impedance when battery fully charged, maximum sink current 5mA. |+| 9 | BGATE | bidirectional | Battery FET gate driver output sourcing typical 50µA to drive external P-channel FET gate, connect to VSS to disable external power path control feature. |+| 10 | OUT | power_out | System output regulated to minimum 3.4V when input source present, supplies system load up to 1.2A maximum output current. |+| 11 | ThermalPad | power_in | Exposed thermal pad electrically connected to VSS, provides thermal dissipation path to PCB for heat management, must be soldered for proper thermal and mechanical performance. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-10-EP(2x3) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `BQ25060DQCR`+- Footprint: `Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm`+- 3D model: WSON-10-EP(2x3) (KiCad packages3D, STEP)+- 3D model files: `bq25060dqcr-etched.step` / `bq25060dqcr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq25060dqcr.step` / `bq25060dqcr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/bq25060) (27 pp, sha256 `29e6b6f949240583`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq25060dqcr-datasheet.pdf)
page.jsonadded+176@@ -0,0 +1,176 @@+{+ "slug": "bq25060dqcr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Battery Management, WSON-10-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "bq25060dqcr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bq25060dqcr.kicad_sym",+ "bq25060dqcr.kicad_mod",+ "bq25060dqcr.glb",+ "bq25060dqcr.step",+ "bq25060dqcr.lbr",+ "docs/hero.png",+ "docs/bq25060dqcr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "BQ25060DQCR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-10-EP(2x3)",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "Battery Management",+ "datasheet": "https://www.ti.com/cn/lit/gpn/bq25060",+ "parts": {+ "symbol": "bq25060dqcr.kicad_sym",+ "footprint": "bq25060dqcr.kicad_mod",+ "model_3d": "bq25060dqcr-etched.glb",+ "model_3d_plain": "bq25060dqcr.glb",+ "model_3d_step": "bq25060dqcr-etched.step",+ "model_3d_step_plain": "bq25060dqcr.step",+ "lbr": "bq25060dqcr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2835501",+ "digikey": "296-27486-2-ND",+ "mouser": "595-BQ25060DQCR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T02:32:59Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-27486-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-BQ25060DQCR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN",+ "type": "power_in",+ "description": "Input power supply from USB or AC adapter, 4.4V to 10.2V operating range, 1.2A continuous maximum input current, with 10.5V over-voltage protection."+ },+ {+ "number": "2",+ "name": "ISET",+ "type": "input",+ "description": "Current programming input, connect external 1kΩ to 10kΩ resistor to VSS to program input current limit between 100mA and 1A."+ },+ {+ "number": "3",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground terminal connected to thermal pad and ground plane."+ },+ {+ "number": "4",+ "name": "LDO",+ "type": "power_out",+ "description": "Low dropout regulator output regulated to 4.9V (4.7V to 5.1V range), drives up to 50mA continuous output current."+ },+ {+ "number": "5",+ "name": "TS",+ "type": "input",+ "description": "Battery NTC thermistor monitoring input for temperature sensing, default operating range 0°C to 45°C with hysteresis protection."+ },+ {+ "number": "6",+ "name": "BAT",+ "type": "power_out",+ "description": "Battery connection output and sense input, sources 28-45mA precharge current when VBAT < 2.9V, up to 1.2A maximum continuous output."+ },+ {+ "number": "7",+ "name": "EN",+ "type": "input",+ "description": "Enable control input selecting charger mode, drive high for disable/suspend, low for programmable current mode via ISET, float for USB500 mode."+ },+ {+ "number": "8",+ "name": "CHG",+ "type": "tri_state",+ "description": "Charge status open-drain output pulled low during charging phases, high impedance when battery fully charged, maximum sink current 5mA."+ },+ {+ "number": "9",+ "name": "BGATE",+ "type": "bidirectional",+ "description": "Battery FET gate driver output sourcing typical 50µA to drive external P-channel FET gate, connect to VSS to disable external power path control feature."+ },+ {+ "number": "10",+ "name": "OUT",+ "type": "power_out",+ "description": "System output regulated to minimum 3.4V when input source present, supplies system load up to 1.2A maximum output current."+ },+ {+ "number": "11",+ "name": "ThermalPad",+ "type": "power_in",+ "description": "Exposed thermal pad electrically connected to VSS, provides thermal dissipation path to PCB for heat management, must be soldered for proper thermal and mechanical performance."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "1/11 pins cited to the wrong page (name found elsewhere): ['11:ThermalPad@p6']"+ ],+ "pages_sent": 27,+ "cost_usd": 0.3082,+ "at": "2026-09-27T02:32:41"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/bq25060",+ "pages": 27,+ "sha256": "29e6b6f949240583",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}