← Commit history

bq24616rget: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·88966306c3 · ·parent b9c768e
2 files changed +94−14
package.json+52−12
@@ -68,25 +68,25 @@         "number": "1",         "name": "ACN",         "type": "input",-        "description": "Adapter current-sense resistor, negative input; place 0.1-\u03bcF ceramic capacitor from ACN to ACP for differential-mode filtering and optional 0.1-\u03bcF capacitor from ACN to GND for common-mode filtering"+        "description": "Adapter current-sense resistor, negative input; place 0.1-μF ceramic capacitor from ACN to ACP for differential-mode filtering and optional 0.1-μF capacitor from ACN to GND for common-mode filtering"       },       {         "number": "2",         "name": "ACP",         "type": "input",-        "description": "Adapter current-sense resistor, positive input; place 0.1-\u03bcF ceramic capacitor from ACN to ACP for differential-mode filtering and 0.1-\u03bcF capacitor from ACP to GND for common-mode filtering"+        "description": "Adapter current-sense resistor, positive input; place 0.1-μF ceramic capacitor from ACN to ACP for differential-mode filtering and 0.1-μF capacitor from ACP to GND for common-mode filtering"       },       {         "number": "3",         "name": "ACDRV",         "type": "output",-        "description": "AC adapter-to-system MOSFET driver output; connect through 1-k\u03a9 resistor to gate of ACFET P-channel MOSFET with asymmetrical internal gate drive and break-before-make logic with respect to BATDRV"+        "description": "AC adapter-to-system MOSFET driver output; connect through 1-kΩ resistor to gate of ACFET P-channel MOSFET with asymmetrical internal gate drive and break-before-make logic with respect to BATDRV"       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge-enable active-HIGH logic input; HI enables charge, LO disables charge, with internal 1-M\u03a9 pulldown resistor"+        "description": "Charge-enable active-HIGH logic input; HI enables charge, LO disables charge, with internal 1-MΩ pulldown resistor"       },       {         "number": "5",@@ -122,7 +122,7 @@         "number": "10",         "name": "VREF",         "type": "power_out",-        "description": "3.3-V regulated voltage output; place 1-\u03bcF ceramic capacitor from VREF to GND pin close to IC for programming voltage and current regulation and TS threshold"+        "description": "3.3-V regulated voltage output; place 1-μF ceramic capacitor from VREF to GND pin close to IC for programming voltage and current regulation and TS threshold"       },       {         "number": "11",@@ -140,13 +140,13 @@         "number": "13",         "name": "SRN",         "type": "bidirectional",-        "description": "Charge current-sense resistor, negative input; place 0.1-\u03bcF ceramic capacitor from SRN to SRP for differential-mode filtering and optional 0.1-\u03bcF capacitor from SRN to GND for common-mode filtering"+        "description": "Charge current-sense resistor, negative input; place 0.1-μF ceramic capacitor from SRN to SRP for differential-mode filtering and optional 0.1-μF capacitor from SRN to GND for common-mode filtering"       },       {         "number": "14",         "name": "SRP",         "type": "bidirectional",-        "description": "Charge current-sense resistor, positive input; place 0.1-\u03bcF ceramic capacitor from SRN to SRP for differential-mode filtering and 0.1-\u03bcF capacitor from SRP to GND for common-mode filtering"+        "description": "Charge current-sense resistor, positive input; place 0.1-μF ceramic capacitor from SRN to SRP for differential-mode filtering and 0.1-μF capacitor from SRP to GND for common-mode filtering"       },       {         "number": "15",@@ -170,7 +170,7 @@         "number": "18",         "name": "REGN",         "type": "output",-        "description": "PWM low-side driver positive 6-V supply output; connect 1-\u03bcF ceramic capacitor from REGN to GND pin close to IC and small-signal Schottky diode from REGN to BTST for bootstrap voltage"+        "description": "PWM low-side driver positive 6-V supply output; connect 1-μF ceramic capacitor from REGN to GND pin close to IC and small-signal Schottky diode from REGN to BTST for bootstrap voltage"       },       {         "number": "19",@@ -194,7 +194,7 @@         "number": "22",         "name": "BTST",         "type": "power_in",-        "description": "PWM high-side driver positive supply; connect 0.1-\u03bcF bootstrap capacitor from PH to BTST and bootstrap Schottky diode from REGN to BTST"+        "description": "PWM high-side driver positive supply; connect 0.1-μF bootstrap capacitor from PH to BTST and bootstrap Schottky diode from REGN to BTST"       },       {         "number": "23",@@ -206,7 +206,7 @@         "number": "24",         "name": "VCC",         "type": "power_in",-        "description": "IC power positive supply; connect through 10-\u03a9 resistor to common-source (diode-OR) point of high-side P-channel MOSFET and reverse-blocking power P-channel MOSFET, place 1-\u03bcF ceramic capacitor from VCC to GND pin close to IC"+        "description": "IC power positive supply; connect through 10-Ω resistor to common-source (diode-OR) point of high-side P-channel MOSFET and reverse-blocking power P-channel MOSFET, place 1-μF ceramic capacitor from VCC to GND pin close to IC"       },       {         "number": "25",@@ -249,6 +249,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24616rget.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24616rget-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9e940ffa23843ff6efc5ef532712b0d9a6d288e955a4340ad4afa3e9a577f8bc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -234,7 +234,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24616rget.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24616rget-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4.0,+          4.0,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9e940ffa23843ff6efc5ef532712b0d9a6d288e955a4340ad4afa3e9a577f8bc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -281,4 +321,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}