← Commit history

bq24230rgtt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·4967e798ae · ·parent 9031fbc
2 files changed +97−17
package.json+55−15
@@ -68,37 +68,37 @@         "number": "1",         "name": "TS",         "type": "input",-        "description": "External NTC Thermistor Input monitoring 10-k\u03a9 thermistor in battery pack; connect 10-k\u03a9 resistor to VSS if not used."+        "description": "External NTC Thermistor Input monitoring 10-kΩ thermistor in battery pack; connect 10-kΩ resistor to VSS if not used."       },       {         "number": "2",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "3",         "name": "BAT",         "type": "bidirectional",-        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "4",         "name": "CE",         "type": "input",-        "description": "Charge Enable Active-Low Input; connect high logic level to disable battery charging; internally pulled down ~285 k\u03a9."+        "description": "Charge Enable Active-Low Input; connect high logic level to disable battery charging; internally pulled down ~285 kΩ."       },       {         "number": "5",         "name": "EN2",         "type": "input",-        "description": "Input Current Limit Configuration Input; use with EN1 to control maximum input current and enable USB compliance; internally pulled down ~285 k\u03a9."+        "description": "Input Current Limit Configuration Input; use with EN1 to control maximum input current and enable USB compliance; internally pulled down ~285 kΩ."       },       {         "number": "6",         "name": "EN1",         "type": "input",-        "description": "Input Current Limit Configuration Input; use with EN2 to control maximum input current and enable USB compliance; internally pulled down ~285 k\u03a9."+        "description": "Input Current Limit Configuration Input; use with EN2 to control maximum input current and enable USB compliance; internally pulled down ~285 kΩ."       },       {         "number": "7",@@ -122,43 +122,43 @@         "number": "10",         "name": "OUT",         "type": "output",-        "description": "System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "11",         "name": "OUT",         "type": "output",-        "description": "System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor."+        "description": "System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor."       },       {         "number": "12",         "name": "ILIM",         "type": "input",-        "description": "Adjustable Current Limit Programming Input; connect 3.1-k\u03a9 to 7.8-k\u03a9 resistor to VSS to program maximum input current 200mA to 500mA."+        "description": "Adjustable Current Limit Programming Input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS to program maximum input current 200mA to 500mA."       },       {         "number": "13",         "name": "IN",         "type": "power_in",-        "description": "Input Power Connection for AC adapter or USB port; operating range 4.35V to 6.6V; accepts up to 26V without damage; bypass with 1\u03bcF to 10\u03bcF capacitor to VSS."+        "description": "Input Power Connection for AC adapter or USB port; operating range 4.35V to 6.6V; accepts up to 26V without damage; bypass with 1μF to 10μF capacitor to VSS."       },       {         "number": "14",         "name": "TMR",         "type": "input",-        "description": "Timer Programming Input controlling precharge and fast-charge safety timers; connect 18-k\u03a9 to 72-k\u03a9 resistor to VSS or leave floating for default 5-hour fast charge timer."+        "description": "Timer Programming Input controlling precharge and fast-charge safety timers; connect 18-kΩ to 72-kΩ resistor to VSS or leave floating for default 5-hour fast charge timer."       },       {         "number": "15",         "name": "TD",         "type": "input",-        "description": "Termination Disable Input (bq24230 only); connect high to disable charger termination; internally pulled down ~285 k\u03a9; checked at startup only."+        "description": "Termination Disable Input (bq24230 only); connect high to disable charger termination; internally pulled down ~285 kΩ; checked at startup only."       },       {         "number": "16",         "name": "ISET",         "type": "bidirectional",-        "description": "Fast-Charge Current Programming Input and Monitoring Output; connect 1.8-k\u03a9 to 36-k\u03a9 resistor to VSS to program 25mA to 500mA fast-charge current; voltage reflects actual charging current."+        "description": "Fast-Charge Current Programming Input and Monitoring Output; connect 1.8-kΩ to 36-kΩ resistor to VSS to program 25mA to 500mA fast-charge current; voltage reflects actual charging current."       },       {         "number": "17",@@ -201,6 +201,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24230rgtt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24230rgtt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9f704d741dc33884c325a605ca6a2dfeefc86c8708dad7b9bc46fb483e90927d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -186,7 +186,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24230rgtt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24230rgtt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          3.0,+          0.785+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "9f704d741dc33884c325a605ca6a2dfeefc86c8708dad7b9bc46fb483e90927d",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -233,4 +273,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}