component
BQ24230RGTT
Public Made by Adomby adom
Texas Instruments Battery Management, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ24230RGTT
Texas Instruments · Battery Management · VQFN-16-EP(3x3)
BQ24230RGTT from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TS | input | External NTC Thermistor Input monitoring 10-kΩ thermistor in battery pack; connect 10-kΩ resistor to VSS if not used. |
| 2 | BAT | bidirectional | Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-μF to 47-μF ceramic capacitor. |
| 3 | BAT | bidirectional | Charger Power Stage Output and Battery Voltage Sense Input; connect to battery positive terminal and bypass to VSS with 4.7-μF to 47-μF ceramic capacitor. |
| 4 | CE | input | Charge Enable Active-Low Input; connect high logic level to disable battery charging; internally pulled down ~285 kΩ. |
| 5 | EN2 | input | Input Current Limit Configuration Input; use with EN1 to control maximum input current and enable USB compliance; internally pulled down ~285 kΩ. |
| 6 | EN1 | input | Input Current Limit Configuration Input; use with EN2 to control maximum input current and enable USB compliance; internally pulled down ~285 kΩ. |
| 7 | PGOOD | output | Open-drain Power Good Status Indication Output; pulls to VSS when valid input source detected (4.35V to 6.6V range); high-impedance when out of range. |
| 8 | VSS | power_in | Ground; connect to thermal pad and ground rail of circuit; primary ground connection for device. |
| 9 | CHG | output | Open-drain Charging Status Indication Output; pulls to VSS when battery charging; high impedance when charging complete or charger disabled. |
| 10 | OUT | output | System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor. |
| 11 | OUT | output | System Supply Output providing regulated 4.4V output when input below OVP threshold; bypass to VSS with 4.7-μF to 47-μF ceramic capacitor. |
| 12 | ILIM | input | Adjustable Current Limit Programming Input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS to program maximum input current 200mA to 500mA. |
| 13 | IN | power_in | Input Power Connection for AC adapter or USB port; operating range 4.35V to 6.6V; accepts up to 26V without damage; bypass with 1μF to 10μF capacitor to VSS. |
| 14 | TMR | input | Timer Programming Input controlling precharge and fast-charge safety timers; connect 18-kΩ to 72-kΩ resistor to VSS or leave floating for default 5-hour fast charge timer. |
| 15 | TD | input | Termination Disable Input (bq24230 only); connect high to disable charger termination; internally pulled down ~285 kΩ; checked at startup only. |
| 16 | ISET | bidirectional | Fast-Charge Current Programming Input and Monitoring Output; connect 1.8-kΩ to 36-kΩ resistor to VSS to program 25mA to 500mA fast-charge current; voltage reflects actual charging current. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
BQ24230RGTT - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
bq24230rgtt-etched.step/bq24230rgtt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq24230rgtt.step/bq24230rgtt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
ba48a6c47944027f, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).