main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs bq24230rgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers bq24230rgtr: viewers · Ray
bq24230rgtr-etched.fit.json bq24230rgtr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
bq24230rgtr-etched.glb bq24230rgtr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
bq24230rgtr-etched.step bq24230rgtr: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
bq24230rgtr-hero.glb bq24230rgtr: hero from the plain model · Ray
bq24230rgtr-hero.overlay.json bq24230rgtr: hero from the plain model · Ray
bq24230rgtr.glb Publish 0.1.0 · Ray
bq24230rgtr.kicad_mod Publish 0.1.0 · Ray
bq24230rgtr.kicad_sym Publish 0.1.0 · Ray
bq24230rgtr.lbr Publish 0.1.0 · Ray
bq24230rgtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/bq24230rgtr · Ray

BQ24230RGTR

Texas Instruments · Global Sourcing Parts · VQFN-16-EP(3x3)

BQ24230RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TS input External NTC thermistor input for battery pack temperature monitoring; monitor 10-kΩ NTC thermistor or connect 10-kΩ fixed resistor to VSS if not utilized.
2 BAT bidirectional Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS.
3 BAT bidirectional Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS.
4 CE input Charge enable active-low input; connect high to disable battery charging, low to enable charger; internally pulled down with ~285 kΩ.
5 EN2 input Input current limit configuration input used with EN1 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ.
6 EN1 input Input current limit configuration input used with EN2 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ.
7 PGOOD tri_state Open-drain power good status indication output; pulls to VSS when valid input source detected (VBAT + VIN(DT) < VIN < VOVP), high-impedance when input power out of specified limits.
8 VSS power_in Ground; connect to thermal pad and to ground rail of the circuit.
9 CHG tri_state Open-drain charging status indication output; pulls to VSS when battery is charging, high impedance when charging complete or charger disabled.
10 OUT power_out System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS.
11 OUT power_out System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS.
12 ILIM input Adjustable current limit programming input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS for programmable mode (EN2=1, EN1=0), leaving unconnected disables all charging.
13 IN power_in Input power connection for external DC supply (USB port or AC adapter); operating range 4.35 V to 6.6 V, accepts up to 26 V without damage but operation suspended; bypass with 1-μF to 10-μF capacitor to VSS.
14 TMR input Timer programming input for precharge and fast-charge safety timers; connect to VSS to disable all timers, or 18-kΩ to 72-kΩ resistor to VSS to program duration, leave unconnected for 5-hour fast-charge and 30-minute precharge defaults.
15 TD input Termination disable input for bq24230; connect high to disable charger termination and safety timers, or low to enable termination; internally pulled down with ~285 kΩ.
16 ISET bidirectional Fast-charge current programming input; connect 1.8-kΩ to 36-kΩ resistor to VSS to program fast-charge current level, or monitor voltage to reflect actual charging current (1/400 of IBAT); leaving unconnected disables charging.
17 PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Global Sourcing Parts
Pins 17

CAD (KiCad official)

  • Symbol: BQ24230RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: bq24230rgtr-etched.step / bq24230rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bq24230rgtr.step / bq24230rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 ba48a6c47944027f, retrieved 2026-09-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF