← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# BQ24230RGTR++**Texas Instruments** · Global Sourcing Parts · VQFN-16-EP(3x3)++BQ24230RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TS | input | External NTC thermistor input for battery pack temperature monitoring; monitor 10-kΩ NTC thermistor or connect 10-kΩ fixed resistor to VSS if not utilized. |+| 2 | BAT | bidirectional | Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS. |+| 3 | BAT | bidirectional | Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS. |+| 4 | CE | input | Charge enable active-low input; connect high to disable battery charging, low to enable charger; internally pulled down with ~285 kΩ. |+| 5 | EN2 | input | Input current limit configuration input used with EN1 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ. |+| 6 | EN1 | input | Input current limit configuration input used with EN2 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ. |+| 7 | PGOOD | tri_state | Open-drain power good status indication output; pulls to VSS when valid input source detected (VBAT + VIN(DT) < VIN < VOVP), high-impedance when input power out of specified limits. |+| 8 | VSS | power_in | Ground; connect to thermal pad and to ground rail of the circuit. |+| 9 | CHG | tri_state | Open-drain charging status indication output; pulls to VSS when battery is charging, high impedance when charging complete or charger disabled. |+| 10 | OUT | power_out | System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS. |+| 11 | OUT | power_out | System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS. |+| 12 | ILIM | input | Adjustable current limit programming input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS for programmable mode (EN2=1, EN1=0), leaving unconnected disables all charging. |+| 13 | IN | power_in | Input power connection for external DC supply (USB port or AC adapter); operating range 4.35 V to 6.6 V, accepts up to 26 V without damage but operation suspended; bypass with 1-μF to 10-μF capacitor to VSS. |+| 14 | TMR | input | Timer programming input for precharge and fast-charge safety timers; connect to VSS to disable all timers, or 18-kΩ to 72-kΩ resistor to VSS to program duration, leave unconnected for 5-hour fast-charge and 30-minute precharge defaults. |+| 15 | TD | input | Termination disable input for bq24230; connect high to disable charger termination and safety timers, or low to enable termination; internally pulled down with ~285 kΩ. |+| 16 | ISET | bidirectional | Fast-charge current programming input; connect 1.8-kΩ to 36-kΩ resistor to VSS to program fast-charge current level, or monitor voltage to reflect actual charging current (1/400 of IBAT); leaving unconnected disables charging. |+| 17 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-16-EP(3x3) |+| Category | Global Sourcing Parts |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `BQ24230RGTR`+- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`+- 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `bq24230rgtr-etched.step` / `bq24230rgtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bq24230rgtr.step` / `bq24230rgtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/bq24230.pdf) (46 pp, sha256 `ba48a6c47944027f`, retrieved 2026-09-29, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/bq24230rgtr-datasheet.pdf)
page.jsonadded+212@@ -0,0 +1,212 @@+{+ "slug": "bq24230rgtr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Global Sourcing Parts, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "global sourcing parts",+ "bq24230rgtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "bq24230rgtr.kicad_sym",+ "bq24230rgtr.kicad_mod",+ "bq24230rgtr.glb",+ "bq24230rgtr.step",+ "bq24230rgtr.lbr",+ "docs/hero.png",+ "docs/bq24230rgtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "BQ24230RGTR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-16-EP(3x3)",+ "pin_count": 17,+ "category": "Global Sourcing Parts",+ "subcategory": "Global Sourcing Parts",+ "datasheet": "https://www.ti.com/lit/ds/symlink/bq24230.pdf",+ "parts": {+ "symbol": "bq24230rgtr.kicad_sym",+ "footprint": "bq24230rgtr.kicad_mod",+ "model_3d": "bq24230rgtr-etched.glb",+ "model_3d_plain": "bq24230rgtr.glb",+ "model_3d_step": "bq24230rgtr-etched.step",+ "model_3d_step_plain": "bq24230rgtr.step",+ "lbr": "bq24230rgtr.lbr"+ },+ "distributor_links": {+ "lcsc": "C524814",+ "digikey": "296-23937-2-ND",+ "mouser": "595-BQ24230RGTR"+ },+ "distributor_check": {+ "checked_at": "2026-09-29T23:02:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-23937-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-BQ24230RGTR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "TS",+ "type": "input",+ "description": "External NTC thermistor input for battery pack temperature monitoring; monitor 10-kΩ NTC thermistor or connect 10-kΩ fixed resistor to VSS if not utilized."+ },+ {+ "number": "2",+ "name": "BAT",+ "type": "bidirectional",+ "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS."+ },+ {+ "number": "3",+ "name": "BAT",+ "type": "bidirectional",+ "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS."+ },+ {+ "number": "4",+ "name": "CE",+ "type": "input",+ "description": "Charge enable active-low input; connect high to disable battery charging, low to enable charger; internally pulled down with ~285 kΩ."+ },+ {+ "number": "5",+ "name": "EN2",+ "type": "input",+ "description": "Input current limit configuration input used with EN1 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ."+ },+ {+ "number": "6",+ "name": "EN1",+ "type": "input",+ "description": "Input current limit configuration input used with EN2 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ."+ },+ {+ "number": "7",+ "name": "PGOOD",+ "type": "tri_state",+ "description": "Open-drain power good status indication output; pulls to VSS when valid input source detected (VBAT + VIN(DT) < VIN < VOVP), high-impedance when input power out of specified limits."+ },+ {+ "number": "8",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground; connect to thermal pad and to ground rail of the circuit."+ },+ {+ "number": "9",+ "name": "CHG",+ "type": "tri_state",+ "description": "Open-drain charging status indication output; pulls to VSS when battery is charging, high impedance when charging complete or charger disabled."+ },+ {+ "number": "10",+ "name": "OUT",+ "type": "power_out",+ "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS."+ },+ {+ "number": "11",+ "name": "OUT",+ "type": "power_out",+ "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS."+ },+ {+ "number": "12",+ "name": "ILIM",+ "type": "input",+ "description": "Adjustable current limit programming input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS for programmable mode (EN2=1, EN1=0), leaving unconnected disables all charging."+ },+ {+ "number": "13",+ "name": "IN",+ "type": "power_in",+ "description": "Input power connection for external DC supply (USB port or AC adapter); operating range 4.35 V to 6.6 V, accepts up to 26 V without damage but operation suspended; bypass with 1-μF to 10-μF capacitor to VSS."+ },+ {+ "number": "14",+ "name": "TMR",+ "type": "input",+ "description": "Timer programming input for precharge and fast-charge safety timers; connect to VSS to disable all timers, or 18-kΩ to 72-kΩ resistor to VSS to program duration, leave unconnected for 5-hour fast-charge and 30-minute precharge defaults."+ },+ {+ "number": "15",+ "name": "TD",+ "type": "input",+ "description": "Termination disable input for bq24230; connect high to disable charger termination and safety timers, or low to enable termination; internally pulled down with ~285 kΩ."+ },+ {+ "number": "16",+ "name": "ISET",+ "type": "bidirectional",+ "description": "Fast-charge current programming input; connect 1.8-kΩ to 36-kΩ resistor to VSS to program fast-charge current level, or monitor voltage to reflect actual charging current (1/400 of IBAT); leaving unconnected disables charging."+ },+ {+ "number": "17",+ "name": "PAD",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 17 added from the footprint"+ ],+ "pages_sent": 14,+ "cost_usd": 0.162,+ "at": "2026-09-29T23:02:11"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/bq24230.pdf",+ "pages": 46,+ "sha256": "ba48a6c47944027f",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}