← Commit history
page.json+17−14@@ -53,37 +53,37 @@ "number": "1", "name": "TS", "type": "input",- "description": "External NTC thermistor input for battery pack temperature monitoring; monitor 10-k\u03a9 NTC thermistor or connect 10-k\u03a9 fixed resistor to VSS if not utilized."+ "description": "External NTC thermistor input for battery pack temperature monitoring; monitor 10-kΩ NTC thermistor or connect 10-kΩ fixed resistor to VSS if not utilized." }, { "number": "2", "name": "BAT", "type": "bidirectional",- "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor to VSS."+ "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS." }, { "number": "3", "name": "BAT", "type": "bidirectional",- "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor to VSS."+ "description": "Charger power stage output and battery voltage sense input; connect to positive battery terminal and bypass with 4.7-μF to 47-μF ceramic capacitor to VSS." }, { "number": "4", "name": "CE", "type": "input",- "description": "Charge enable active-low input; connect high to disable battery charging, low to enable charger; internally pulled down with ~285 k\u03a9."+ "description": "Charge enable active-low input; connect high to disable battery charging, low to enable charger; internally pulled down with ~285 kΩ." }, { "number": "5", "name": "EN2", "type": "input",- "description": "Input current limit configuration input used with EN1 to control maximum input current and enable USB compliance; internally pulled down with ~285 k\u03a9."+ "description": "Input current limit configuration input used with EN1 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ." }, { "number": "6", "name": "EN1", "type": "input",- "description": "Input current limit configuration input used with EN2 to control maximum input current and enable USB compliance; internally pulled down with ~285 k\u03a9."+ "description": "Input current limit configuration input used with EN2 to control maximum input current and enable USB compliance; internally pulled down with ~285 kΩ." }, { "number": "7",@@ -107,43 +107,43 @@ "number": "10", "name": "OUT", "type": "power_out",- "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor to VSS."+ "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS." }, { "number": "11", "name": "OUT", "type": "power_out",- "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-\u03bcF to 47-\u03bcF ceramic capacitor to VSS."+ "description": "System supply output providing regulated output when input below OVP threshold and above regulation voltage, connected to VBAT when out of operation range; bypass with 4.7-μF to 47-μF ceramic capacitor to VSS." }, { "number": "12", "name": "ILIM", "type": "input",- "description": "Adjustable current limit programming input; connect 3.1-k\u03a9 to 7.8-k\u03a9 resistor to VSS for programmable mode (EN2=1, EN1=0), leaving unconnected disables all charging."+ "description": "Adjustable current limit programming input; connect 3.1-kΩ to 7.8-kΩ resistor to VSS for programmable mode (EN2=1, EN1=0), leaving unconnected disables all charging." }, { "number": "13", "name": "IN", "type": "power_in",- "description": "Input power connection for external DC supply (USB port or AC adapter); operating range 4.35 V to 6.6 V, accepts up to 26 V without damage but operation suspended; bypass with 1-\u03bcF to 10-\u03bcF capacitor to VSS."+ "description": "Input power connection for external DC supply (USB port or AC adapter); operating range 4.35 V to 6.6 V, accepts up to 26 V without damage but operation suspended; bypass with 1-μF to 10-μF capacitor to VSS." }, { "number": "14", "name": "TMR", "type": "input",- "description": "Timer programming input for precharge and fast-charge safety timers; connect to VSS to disable all timers, or 18-k\u03a9 to 72-k\u03a9 resistor to VSS to program duration, leave unconnected for 5-hour fast-charge and 30-minute precharge defaults."+ "description": "Timer programming input for precharge and fast-charge safety timers; connect to VSS to disable all timers, or 18-kΩ to 72-kΩ resistor to VSS to program duration, leave unconnected for 5-hour fast-charge and 30-minute precharge defaults." }, { "number": "15", "name": "TD", "type": "input",- "description": "Termination disable input for bq24230; connect high to disable charger termination and safety timers, or low to enable termination; internally pulled down with ~285 k\u03a9."+ "description": "Termination disable input for bq24230; connect high to disable charger termination and safety timers, or low to enable termination; internally pulled down with ~285 kΩ." }, { "number": "16", "name": "ISET", "type": "bidirectional",- "description": "Fast-charge current programming input; connect 1.8-k\u03a9 to 36-k\u03a9 resistor to VSS to program fast-charge current level, or monitor voltage to reflect actual charging current (1/400 of IBAT); leaving unconnected disables charging."+ "description": "Fast-charge current programming input; connect 1.8-kΩ to 36-kΩ resistor to VSS to program fast-charge current level, or monitor voltage to reflect actual charging current (1/400 of IBAT); leaving unconnected disables charging." }, { "number": "17",@@ -229,5 +229,8 @@ "docs/bq24230rgtr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }