← Commit history
bq24192rger: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+97−17
package.json+55−15@@ -68,7 +68,7 @@ "number": "1", "name": "VBUS", "type": "power_in",- "description": "Charger input voltage; place 1-\u00b5F ceramic capacitor close to IC from VBUS to PGND."+ "description": "Charger input voltage; place 1-µF ceramic capacitor close to IC from VBUS to PGND." }, { "number": "2",@@ -92,19 +92,19 @@ "number": "5", "name": "SCL", "type": "input",- "description": "I2C interface clock; connect through 10-k\u03a9 pull-up resistor to logic rail."+ "description": "I2C interface clock; connect through 10-kΩ pull-up resistor to logic rail." }, { "number": "6", "name": "SDA", "type": "bidirectional",- "description": "I2C interface data line; connect through 10-k\u03a9 pull-up resistor to logic rail."+ "description": "I2C interface data line; connect through 10-kΩ pull-up resistor to logic rail." }, { "number": "7", "name": "INT", "type": "output",- "description": "Open-drain interrupt output; sends active-low 256-\u00b5s pulse to host to report charger status and faults."+ "description": "Open-drain interrupt output; sends active-low 256-µs pulse to host to report charger status and faults." }, { "number": "8",@@ -122,7 +122,7 @@ "number": "10", "name": "ILIM", "type": "input",- "description": "Input current limit setting; connect resistor to ground to set maximum limit as IINMAX = (1V/RILIM) \u00d7 530 with minimum 500 mA."+ "description": "Input current limit setting; connect resistor to ground to set maximum limit as IINMAX = (1V/RILIM) × 530 with minimum 500 mA." }, { "number": "11",@@ -140,13 +140,13 @@ "number": "13", "name": "BAT", "type": "power_in",- "description": "Battery positive connection point; internal BATFET connected between BAT and SYS; connect 10-\u00b5F capacitor closely to pin."+ "description": "Battery positive connection point; internal BATFET connected between BAT and SYS; connect 10-µF capacitor closely to pin." }, { "number": "14", "name": "BAT", "type": "power_in",- "description": "Battery positive connection point; internal BATFET connected between BAT and SYS; connect 10-\u00b5F capacitor closely to pin."+ "description": "Battery positive connection point; internal BATFET connected between BAT and SYS; connect 10-µF capacitor closely to pin." }, { "number": "15",@@ -176,37 +176,37 @@ "number": "19", "name": "SW", "type": "output",- "description": "Switching node connecting to output inductor; connect 0.047-\u00b5F bootstrap capacitor from SW to BTST."+ "description": "Switching node connecting to output inductor; connect 0.047-µF bootstrap capacitor from SW to BTST." }, { "number": "20", "name": "SW", "type": "output",- "description": "Switching node connecting to output inductor; connect 0.047-\u00b5F bootstrap capacitor from SW to BTST."+ "description": "Switching node connecting to output inductor; connect 0.047-µF bootstrap capacitor from SW to BTST." }, { "number": "21", "name": "BTST", "type": "power_in",- "description": "PWM high-side driver positive supply; internally connected to boost-strap diode anode; connect 0.047-\u00b5F bootstrap capacitor from SW."+ "description": "PWM high-side driver positive supply; internally connected to boost-strap diode anode; connect 0.047-µF bootstrap capacitor from SW." }, { "number": "22", "name": "REGN", "type": "power_out",- "description": "PWM low-side driver positive supply output; connect 4.7-\u00b5F (10V rating) ceramic capacitor from REGN to analog ground close to IC."+ "description": "PWM low-side driver positive supply output; connect 4.7-µF (10V rating) ceramic capacitor from REGN to analog ground close to IC." }, { "number": "23", "name": "PMID", "type": "output",- "description": "Internal node connected to drain of reverse blocking MOSFET and drain of high-side FET; place 1-\u00b5F capacitor on VBUS to PGND and remaining on PMID to PGND."+ "description": "Internal node connected to drain of reverse blocking MOSFET and drain of high-side FET; place 1-µF capacitor on VBUS to PGND and remaining on PMID to PGND." }, { "number": "24", "name": "VBUS", "type": "power_in",- "description": "Charger input voltage; place 1-\u00b5F ceramic capacitor close to IC from VBUS to PGND."+ "description": "Charger input voltage; place 1-µF ceramic capacitor close to IC from VBUS to PGND." }, { "number": "25",@@ -250,6 +250,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq24192rger.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq24192rger-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2c4aa746ed3666823ba6b4e0d0a9c157d2eb581eb613dfa90879de0304df12c3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -235,7 +235,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "bq24192rger.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "bq24192rger-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2c4aa746ed3666823ba6b4e0d0a9c157d2eb581eb613dfa90879de0304df12c3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -282,4 +322,4 @@ "visibility": { "public": true }-}+}