BQ24095DGQR

{
  "slug": "bq24095dgqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Battery Management ICs, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "bq24095dgqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq24095dgqr.kicad_sym",
    "bq24095dgqr.kicad_mod",
    "bq24095dgqr.glb",
    "bq24095dgqr.step",
    "bq24095dgqr.lbr",
    "docs/hero.png",
    "docs/bq24095dgqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq24095dgqr-hero.glb",
    "bq24095dgqr-hero.overlay.json",
    "bq24095dgqr-etched.glb"
  ],
  "component": {
    "mpn": "BQ24095DGQR",
    "manufacturer": "Texas Instruments",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "Battery Management ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/bq24095dgqr.pdf",
    "parts": {
      "symbol": "bq24095dgqr.kicad_sym",
      "footprint": "bq24095dgqr.kicad_mod",
      "model_3d": "bq24095dgqr-hero.glb",
      "model_3d_plain": "bq24095dgqr-etched.glb",
      "model_3d_step": "bq24095dgqr-etched.step",
      "model_3d_step_plain": "bq24095dgqr.step",
      "lbr": "bq24095dgqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2863757",
      "digikey": "296-39906-2-ND",
      "mouser": "595-BQ24095DGQR"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T17:02:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-39906-2-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-BQ24095DGQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Input power connected to the external DC supply (AC adapter or USB port), with bypass capacitors of 1 µF to 10 µF expected from IN to VSS."
      },
      {
        "number": "2",
        "name": "ISET",
        "type": "input",
        "description": "Programs the fast-charge current through an external resistor from ISET to VSS, with a range of 10.8 kΩ (50 mA) to 540 Ω (1000 mA)."
      },
      {
        "number": "3",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground terminal that must be connected to ground at all times."
      },
      {
        "number": "4",
        "name": "PRE-TERM",
        "type": "input",
        "description": "Programs the termination current threshold (5 to 50% of the ISET-set charge current) and sets the precharge current to twice the termination level, using a programming resistor of 1 kΩ to 10 kΩ."
      },
      {
        "number": "5",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that goes low (FET on) when the input voltage is above UVLO and above the OUT battery voltage."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Do not make a connection to this pin; it is for internal use and signals must not be routed through it."
      },
      {
        "number": "7",
        "name": "ISET2",
        "type": "input",
        "description": "Selects the USB or adapter input/output current limit: high gives 500 mA max, low sets the limit to ISET, and float gives 100 mA max."
      },
      {
        "number": "8",
        "name": "CHG",
        "type": "output",
        "description": "Open-drain charge status output that goes low (FET on) while charging and is open (FET off) when not charging or charge is complete, with a sink current rating of 15 mA."
      },
      {
        "number": "9",
        "name": "TS",
        "type": "input",
        "description": "Battery NTC thermistor sense input (10 kΩ at 25°C for BQ24095); floating or pulling high enters TTDM mode and disables TS monitoring, while pulling low disables the IC."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "power_out",
        "description": "Battery connection where a system load may be connected, with the average load kept low enough for the battery to charge within the 10-hour safety timer; bypass capacitors of 1 µF to 10 µF are expected."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The hint says MSOP-10, but the datasheet orders this device as HVSSOP (10) in DGQ package, 3.00 mm x; The exposed thermal pad is not a numbered pin and is not included in the pins list. Per the datashee"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0186,
        "at": "2026-11-02T17:01:55"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/bq24095dgqr.pdf",
        "pages": 42,
        "sha256": "bb8f77481f20cd46",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq24095dgqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq24095dgqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "932f52343769ccfde49fb6d95bfa33ccbcd5a296392ca7b3b361158be1317d65",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}