component
BQ2002FSNTR
Public Made by Adomby adom
Texas Instruments Battery Management, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ2002FSNTR
Texas Instruments · Battery Management · SOIC-8
BQ2002FSNTR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TM | input | Three-level timer mode input that selects the fast-charge safety timer, voltage termination mode, top-off, pulse-trickle and hold-off time; mid level is VCC/2 ± 0.5V set by a resistor divider. |
| 2 | LED | output | Open-drain charging status output that goes low during fast charge and is high-Z otherwise, with VOL max 0.8V at IOL = 10mA. |
| 3 | BAT | input | Battery voltage sense input from a high-impedance resistor divider (200kΩ to 1MΩ end-to-end) representing a single-cell potential, valid 0 to VCC. |
| 4 | VSS | power_in | System ground. |
| 5 | TS | input | Temperature sense input for an external NTC thermistor network between VCC and VSS; VTS below 0.5V is prohibited and VTS at or below 0.5*VCC terminates/inhibits fast charge. |
| 6 | VCC | power_in | Supply voltage input of 5.0V ±20% (4.0V to 6.0V recommended operating range). |
| 7 | INH | input | Charge inhibit input that suspends fast charge, top-off and the charge timer when high and resumes from the suspended point when returned low. |
| 8 | CC | output | Open-drain charge control output where high-Z enables charging current and low inhibits it, modulated for top-off and pulse trickle, with VOL max 0.8V at IOL = 10mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
BQ2002FSNTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
bq2002fsntr-etched.step/bq2002fsntr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq2002fsntr.step/bq2002fsntr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
49592cdda95cf8eb, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).