master
Ray Publish 0.1.0 2586250
{
  "slug": "bmp581",
  "version": "0.1.0",
  "type": "component",
  "description": "Bosch Sensortec Pressure Sensors, LGA-10(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "bmp581",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bmp581.kicad_sym",
    "bmp581.kicad_mod",
    "bmp581.glb",
    "bmp581.step",
    "bmp581.lbr",
    "docs/hero.png",
    "docs/bmp581-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bmp581-hero.glb",
    "bmp581-hero.overlay.json"
  ],
  "component": {
    "mpn": "BMP581",
    "manufacturer": "Bosch Sensortec",
    "package": "LGA-10(2x2)",
    "pin_count": 10,
    "category": "Sensors",
    "subcategory": "Pressure Sensors",
    "datasheet": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf",
    "parts": {
      "symbol": "bmp581.kicad_sym",
      "footprint": "bmp581.kicad_mod",
      "model_3d": "bmp581-hero.glb",
      "model_3d_plain": "bmp581.glb",
      "model_3d_step": "bmp581-etched.step",
      "model_3d_step_plain": "bmp581.step",
      "lbr": "bmp581.lbr"
    },
    "distributor_links": {
      "lcsc": "C5362283",
      "digikey": "828-BMP581CT-ND",
      "mouser": "262-BMP581"
    },
    "distributor_check": {
      "checked_at": "2026-11-17T16:02:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "828-BMP581CT-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "262-BMP581",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Digital interface supply VDDIO, connected to the host interface supply."
      },
      {
        "number": "2",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input, used in both SPI 4-wire and SPI 3-wire modes."
      },
      {
        "number": "3",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; all VSS pins must be connected to GND."
      },
      {
        "number": "4",
        "name": "SDI",
        "type": "bidirectional",
        "description": "Serial data input in SPI 4-wire mode and bidirectional SDI/SDO data pad in SPI 3-wire mode; it must be tied to low or high and not left floating."
      },
      {
        "number": "5",
        "name": "SDO",
        "type": "bidirectional",
        "description": "Serial data output in SPI 4-wire mode; in SPI 3-wire mode it must be left floating (DNC)."
      },
      {
        "number": "6",
        "name": "CSB",
        "type": "input",
        "description": "Chip select input, active low."
      },
      {
        "number": "7",
        "name": "INT",
        "type": "output",
        "description": "Interrupt output to the host INT input; it may be connected to GND or left unconnected only with INT_CONFIG.int_en disabled or the recommended settings."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; all VSS pins must be connected to GND."
      },
      {
        "number": "9",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground; all VSS pins must be connected to GND."
      },
      {
        "number": "10",
        "name": "VDD",
        "type": "power_in",
        "description": "Analog supply VDD for the sensor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The provided pages show the LGA package and the 10-pin table (Table 28) but do not state the 2x2 mm "
        ],
        "pages_sent": 24,
        "cost_usd": 0.0488,
        "at": "2026-11-17T16:02:08"
      },
      "datasheet": {
        "url": "https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf",
        "pages": 75,
        "sha256": "ddcf4202c4fdf2ab",
        "source_tier": "mfr"
      },
      "cad": "Adom_Gen derived land; symbol and 3D generated",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bmp581.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b9fb43cbd70b631c55cb419027a1a51a85b54534a35b31a58e530bdee0b2527d",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bmp581-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a4fd52457f714dce2a82b15425b0e5894b1f03a42a64df52ac5c06d410115bd9",
        "checked": "2026-11-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}