main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers bmp388: viewers · Ray
bmp388-etched.glb bmp388: factory component page (tier=mfr) · Ray
bmp388-etched.step bmp388: factory component page (tier=mfr) · Ray
bmp388-hero.glb bmp388: hero GLB from the etched model (keeps the MPN mark) · Ray
bmp388-hero.overlay.json bmp388: hero GLB from the etched model (keeps the MPN mark) · Ray
bmp388.glb Publish 0.1.0 · Ray
bmp388.kicad_mod Publish 0.1.0 · Ray
bmp388.kicad_sym Publish 0.1.0 · Ray
bmp388.lbr Publish 0.1.0 · Ray
bmp388.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

BMP388

Bosch Sensortec · Pressure Sensors · LGA-10(2x2)

BMP388 from Bosch Sensortec, in a LGA-10(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VDDIO power_in Digital interface supply VDDIO, with a stated interface voltage range of 1.2 V to 3.6 V.
2 SCK input Serial clock input, connected to SCK in SPI modes and to SCL in I²C mode.
3 VSS power_in Ground connection to GND.
4 SDI bidirectional Serial data input in 4-wire SPI, shared SDI/SDO data line in 3-wire SPI, and SDA in I²C mode.
5 SDO bidirectional Serial data output in 4-wire SPI, not connected in 3-wire SPI, and SA0 I²C address select in I²C mode.
6 CSB input Chip select input, connected to CSB in SPI modes and to CSB in I²C mode, where it is recommended to drive VDDIO at power-on.
7 INT output Interrupt output to the host INT input, or left unconnected (DNC) in I²C mode; push-pull active high by default after power-on or soft reset.
8 VSS power_in Ground connection to GND.
9 VSS power_in Ground connection to GND.
10 VDD power_in Analog supply VDD, with a main supply voltage range of 1.65 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer Bosch Sensortec
Package LGA-10(2x2)
Category Sensors
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature range TA -40 25 85 °C operational 7
Operating temperature range, full accuracy TA 0 65 °C full accuracy 7
Operating pressure range P 300 1250 hPa full accuracy 7
Sensor supply voltage VDD 1.65 1.8 3.6 V ripple max. 50mVpp 7
Interface supply voltage VDDIO 1.2 1.8 3.6 V 7
Sleep current IDD,sleep 2 µA VDD = VDDIO 1.8-3.6 V 7
Peak current during pressure measurement Ipeak 700 800 µA during pressure measurement 7
Current at temperature measurement IDDT 300 400 µA at temperature measurement 7
Relative accuracy pressure Arel -0.082 0.082 hPa 900 … 1100 hPa, 25 . . . 40 °C 7
Relative accuracy pressure Arel -66 66 cm 900 … 1100 hPa, 25 . . . 40 °C 7
Offset temperature coefficient TCO -0.75 0.75 Pa/K 700-1100 hPa, 0 . . . 55 °C 7
Offset temperature coefficient TCO -1 1 Pa/K 700-1100 hPa, -20 . . .0 °C 7
Absolute accuracy pressure, full range APfull -0.5 0.5 hPa 300 . . 1100 hPa, -20 . . . 65 °C 7
Absolute accuracy pressure, extended range APext -0.4 0.4 hPa 900 . . 1100 hPa, 25 . . . 40 °C 7
Absolute accuracy pressure, 1100-1250 hPa AP -1.5 1.5 hPa 1100 . . 1250 hPa, 0 . . 65 °C 8
Resolution of output data pressure RP 0.016 Pa highest resolution mode at lowest bandwidth 8
Noise in pressure, full bandwidth Vp,full 1.2 Pa Full bandwidth, highest resolution 8
Noise in pressure, filtered Vp,filtered 0.03 Pa Lowest bandwidth, highest resolution 8
Absolute accuracy temperature at 25 °C AT -0.3 0.3 °C @ 25 °C 8
Absolute accuracy temperature AT -0.5 0.5 °C 0 . . . +65 °C 8
Long term stability pressure ∆Pstab -0.33 0.33 hPa 12 months 8
Solder drift pressure -1 1 hPa Minimum solder height 50 µm 8
Start-up time tstartup 2 ms Time to first communication after both VDD > 1.58V and VDDIO > 0.65V 8
Possible sampling rate fsample 200 Hz osrs_t = osrs_p = 1 8
ODR accuracy ∆tstandby -125 125 % 25°C 8
Supply voltage at any supply pin VDD and VDDIO -0.3 3.8 V Pin 9
Voltage at any interface pin Vss -0.3 V max VDDIO + 0.3 V 9
Storage temperature -45 85 °C ≤ 65% rel. H. 9
Overpressure survivability POVER 2e+06 Pa 9
Mechanical shock MS 12000 g MIL-STD-883H 2002.5 9

CAD (Adom-generated)

  • Symbol: BMP388
  • Footprint: Adom_Gen:Bosch_Sensortec_BMP388_516d84
  • 3D model: generated to fit the land (STEP)
  • 3D model files: bmp388-etched.step / bmp388-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bmp388.step / bmp388.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Bosch Sensortec datasheet (59 pp, sha256 1ab21c90aaf15542, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF