BM1P067FJ-E2

{
  "slug": "bm1p067fj-e2",
  "version": "0.1.0",
  "type": "component",
  "description": "ROHM Semicon AC-DC Controllers & Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "bm1p067fj-e2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bm1p067fj-e2.kicad_sym",
    "bm1p067fj-e2.kicad_mod",
    "bm1p067fj-e2.glb",
    "bm1p067fj-e2.step",
    "bm1p067fj-e2.lbr",
    "docs/hero.png",
    "docs/bm1p067fj-e2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bm1p067fj-e2-hero.glb",
    "bm1p067fj-e2-hero.overlay.json",
    "bm1p067fj-e2-etched.glb"
  ],
  "component": {
    "mpn": "BM1P067FJ-E2",
    "manufacturer": "ROHM Semicon",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/0e299203fa7e1540aad266fc8b6b1c9f.pdf",
    "parts": {
      "symbol": "bm1p067fj-e2.kicad_sym",
      "footprint": "bm1p067fj-e2.kicad_mod",
      "model_3d": "bm1p067fj-e2-hero.glb",
      "model_3d_plain": "bm1p067fj-e2-etched.glb",
      "model_3d_step": "bm1p067fj-e2-etched.step",
      "model_3d_step_plain": "bm1p067fj-e2.step",
      "lbr": "bm1p067fj-e2.lbr"
    },
    "distributor_links": {
      "lcsc": "C3093709",
      "digikey": "846-BM1P067FJ-E2TR-ND",
      "mouser": "755-BM1P067FJ-E2"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T02:36:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "846-BM1P067FJ-E2TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "755-BM1P067FJ-E2",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "N.C",
        "type": "unconnected",
        "description": "Non-connection pin with no internal connection, per the pin table."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback signal input pin, with an internal pull-up of 22 kΩ to 38 kΩ (30 kΩ typ.)."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Primary current sense pin; overcurrent detection voltage is 0.380 V to 0.420 V (0.400 V typ.) at Ton = 0 µs, with 250 ns typ. leading edge blanking."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the IC, listed as I/O in the datasheet pin table and carrying the ESD diode to GND only."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "output",
        "description": "External MOS drive pin that drives the external switching MOSFET."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input pin; the stated operating supply range is 8.9 V to 26.0 V, and the block diagram shows VCC overvoltage protection at 27.5 V."
      },
      {
        "number": "7",
        "name": "N.C.",
        "type": "unconnected",
        "description": "Non-connection pin with no internal connection, per the pin table."
      },
      {
        "number": "8",
        "name": "VH",
        "type": "input",
        "description": "Start circuit pin; VH is rated up to 600 V and the built-in start circuit withstands 650 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package mismatch: the datasheet lists this part only as SOP-J8 (package code FJ), not SOIC-8. The pi; Pin 4 is listed as I/O in the datasheet pin table; per the schema rule it is classified as power_in ; Pin 6 is listed as I/O in the datasheet pin table; it is classified as power_in because it is the su"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0324,
        "at": "2026-10-29T02:36:04"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/0e299203fa7e1540aad266fc8b6b1c9f.pdf",
        "pages": 29,
        "sha256": "b13525251d9c700b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bm1p067fj-e2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bm1p067fj-e2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5d4e0a526cbd7b803df001441cf64943d1e92331c81395f96069a9c5d4bb0d3e",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}