BLUENRG-132

{
  "schema_version": 1,
  "type": "component",
  "slug": "bluenrg-132",
  "title": "BLUENRG-132",
  "brief": "STMicroelectronics RF Transceiver ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "rf & radio",
    "bluenrg-132",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BLUENRG-132",
    "manufacturer": "STMicroelectronics",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "RF & Radio",
    "subcategory": "RF Transceiver ICs",
    "datasheet": "https://www.st.com/resource/en/datasheet/bluenrg-132.pdf",
    "parts": {
      "symbol": "bluenrg-132.kicad_sym",
      "footprint": "bluenrg-132.kicad_mod",
      "model_3d": "bluenrg-132-hero.glb",
      "model_3d_plain": "bluenrg-132-etched.glb",
      "model_3d_step": "bluenrg-132-etched.step",
      "model_3d_step_plain": "bluenrg-132.step",
      "lbr": "bluenrg-132.lbr"
    },
    "distributor_links": {
      "lcsc": "C133308",
      "digikey": "497-16695-2-ND",
      "mouser": "511-BLUENRG-132"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T23:25:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-16695-2-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "511-BLUENRG-132",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IO10",
        "type": "bidirectional",
        "description": "General purpose digital I/O; in serial1 mode it is the SWDIO SWD data signal, with internal pull-up."
      },
      {
        "number": "2",
        "name": "IO9",
        "type": "bidirectional",
        "description": "General purpose digital I/O; in serial1 mode it is the SWCLK SWD clock signal, with internal pull-up."
      },
      {
        "number": "3",
        "name": "IO8",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "4",
        "name": "IO7/BOOT",
        "type": "bidirectional",
        "description": "Bootloader pin and general purpose digital I/O; it is monitored by the bootloader after power-up or hardware reset and should be low to prevent unwanted bootloader activation."
      },
      {
        "number": "5",
        "name": "IO6",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "6",
        "name": "VBAT3",
        "type": "power_in",
        "description": "Battery voltage input (VDD supply pin)."
      },
      {
        "number": "7",
        "name": "IO5",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "8",
        "name": "IO4",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "9",
        "name": "IO3",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "10",
        "name": "IO2",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "11",
        "name": "IO1",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "12",
        "name": "IO0",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "13",
        "name": "ANATEST0/IO14",
        "type": "bidirectional",
        "description": "Analog output (ANATEST0, used for crystal startup measurement) or general purpose digital I/O; the pin is internally bound to ANATEST0 and a short positive pulse of about 75 µs is generated at device reset."
      },
      {
        "number": "14",
        "name": "ANATEST1",
        "type": "output",
        "description": "Analog output that switches high about 18 µs before a transmission and about 10 µs before a reception event, for antenna switching and coexistence control."
      },
      {
        "number": "15",
        "name": "ADC1",
        "type": "input",
        "description": "ADC input 1."
      },
      {
        "number": "16",
        "name": "ADC2",
        "type": "input",
        "description": "ADC input 2."
      },
      {
        "number": "17",
        "name": "FXTAL1",
        "type": "input",
        "description": "16/32 MHz crystal connection."
      },
      {
        "number": "18",
        "name": "FXTAL0",
        "type": "input",
        "description": "16/32 MHz crystal connection."
      },
      {
        "number": "19",
        "name": "VBAT2",
        "type": "power_in",
        "description": "Battery voltage input (VDD supply pin)."
      },
      {
        "number": "20",
        "name": "RF1",
        "type": "bidirectional",
        "description": "Antenna and matching circuit connection."
      },
      {
        "number": "21",
        "name": "RF0",
        "type": "bidirectional",
        "description": "Antenna and matching circuit connection."
      },
      {
        "number": "22",
        "name": "SXTAL1",
        "type": "input",
        "description": "32 kHz crystal connection."
      },
      {
        "number": "23",
        "name": "SXTAL0",
        "type": "input",
        "description": "32 kHz crystal connection."
      },
      {
        "number": "24",
        "name": "VBAT1",
        "type": "power_in",
        "description": "Battery voltage input (VDD supply pin)."
      },
      {
        "number": "25",
        "name": "RESETN",
        "type": "input",
        "description": "System reset input."
      },
      {
        "number": "26",
        "name": "SMPSFILT1",
        "type": "input",
        "description": "SMPS output to external filter."
      },
      {
        "number": "27",
        "name": "SMPSFILT2",
        "type": "bidirectional",
        "description": "SMPS output to external filter, also used as battery voltage input."
      },
      {
        "number": "28",
        "name": "VDD1V2",
        "type": "power_out",
        "description": "1.2 V digital core output."
      },
      {
        "number": "29",
        "name": "IO13",
        "type": "bidirectional",
        "description": "General purpose digital input; per the datasheet it can only be an input, and if unused it must be tied to GND through a pull-down resistor."
      },
      {
        "number": "30",
        "name": "IO12",
        "type": "bidirectional",
        "description": "General purpose digital input; per the datasheet it can only be an input, and if unused it must be tied to GND through a pull-down resistor."
      },
      {
        "number": "31",
        "name": "TEST",
        "type": "input",
        "description": "Test pin, to be put to GND."
      },
      {
        "number": "32",
        "name": "IO11",
        "type": "bidirectional",
        "description": "General purpose digital I/O."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The GND balls A4, B6, C1 and F5 appear in Table 198 with no QFN32 pin number ('-'), so they are not ; Pin 29 (IO13) and pin 30 (IO12) are typed I/O in Table 198, but Section 3.12.2 and Table 126 state I; Pin 26 SMPSFILT1 is typed 'I' in Table 198 although it is described as an SMPS output to an external",
          "exposed pad 33 added from the footprint"
        ],
        "pages_sent": 39,
        "cost_usd": 0.1572,
        "at": "2026-10-28T23:25:12"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/bluenrg-132.pdf",
        "pages": 184,
        "sha256": "c04914b6ac402ea9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bluenrg-132.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bluenrg-132-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "0479685e55a2a5069730509a10ea5585140fa3c164b31d23f0dcfbca9e92d0e8",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "QFN32 (5x5x1 pitch 0.5 mm)",
      "source_page": 175,
      "D": {
        "nom_mm": 5,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 5,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.85,
        "range_mm": [
          0.8,
          1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "bluenrg-132.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "QFN-32-EP(5x5)",
      "Category": "RF & Radio",
      "Pins": "33"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "c04914b6ac402ea9987e8068a457cd6ef1aef5e32cf52644794e5f757085a003",
      "rows": [
        {
          "name": "Operating battery supply voltage",
          "symbol": "VBAT",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.7,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 162,
          "source": "datasheet"
        },
        {
          "name": "Operating ambient temperature range",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 105,
          "conditions": "",
          "source_page": 162,
          "source": "datasheet"
        },
        {
          "name": "DC-DC converter supply voltage input and output",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Pins: VBAT3, VBAT2, VBAT1, RESETN, SMPSFILT1, SMPSFILT2",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on linear voltage regulator",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Pin: VDD1V2",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on digital input/output pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Pins: DIO0 to DIO14, TEST",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on analog pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 3.9,
          "conditions": "Pins: ANATEST0, ANATEST1, ADC1, ADC2",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on XTAL pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 1.4,
          "conditions": "Pins: FXTAL0, FXTAL1, SXTAL0, SXTAL1",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "DC voltage on RF pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 1.4,
          "conditions": "Pins: RF0, RF1",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "Electrostatic discharge voltage (HBM)",
          "symbol": "VESD-HBM",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": -2,
          "typ": null,
          "max": 2,
          "conditions": "",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "Frequency range",
          "symbol": "FREQ",
          "kind": "electrical",
          "unit": "MHz",
          "min": 2400,
          "typ": null,
          "max": 2483.5,
          "conditions": "",
          "source_page": 165,
          "source": "datasheet"
        },
        {
          "name": "RF channel center frequency",
          "symbol": "RFch",
          "kind": "electrical",
          "unit": "MHz",
          "min": 2402,
          "typ": null,
          "max": 2480,
          "conditions": "",
          "source_page": 165,
          "source": "datasheet"
        },
        {
          "name": "Maximum output power",
          "symbol": "PMAX",
          "kind": "electrical",
          "unit": "dBm",
          "min": null,
          "typ": 8,
          "max": 10,
          "conditions": "At antenna connector",
          "source_page": 165,
          "source": "datasheet"
        },
        {
          "name": "6 dB bandwidth for modulated carrier (1 Mbps)",
          "symbol": "PBW1M",
          "kind": "electrical",
          "unit": "kHz",
          "min": 500,
          "typ": null,
          "max": null,
          "conditions": "Using resolution bandwidth of 100 kHz",
          "source_page": 165,
          "source": "datasheet"
        },
        {
          "name": "High speed crystal oscillator frequency tolerance",
          "symbol": "fTOL",
          "kind": "tolerance",
          "unit": "ppm",
          "min": -50,
          "typ": null,
          "max": 50,
          "conditions": "Includes initial accuracy, stability over temperature, aging and frequency pulling due to incorrect load capacitance",
          "source_page": 167,
          "source": "datasheet"
        },
        {
          "name": "High speed crystal oscillator equivalent series resistance",
          "symbol": "ESR",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 167,
          "source": "datasheet"
        },
        {
          "name": "High speed crystal oscillator drive level",
          "symbol": "PD",
          "kind": "electrical",
          "unit": "µW",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "",
          "source_page": 167,
          "source": "datasheet"
        },
        {
          "name": "Low speed crystal oscillator frequency tolerance",
          "symbol": "fTOL",
          "kind": "tolerance",
          "unit": "ppm",
          "min": -50,
          "typ": null,
          "max": 50,
          "conditions": "Includes initial accuracy, stability over temperature, aging and frequency pulling due to incorrect load capacitance.",
          "source_page": 169,
          "source": "datasheet"
        },
        {
          "name": "Low speed crystal oscillator equivalent series resistance",
          "symbol": "ESR",
          "kind": "electrical",
          "unit": "kΩ",
          "min": null,
          "typ": null,
          "max": 90,
          "conditions": "",
          "source_page": 169,
          "source": "datasheet"
        },
        {
          "name": "Low speed crystal oscillator drive level",
          "symbol": "PD",
          "kind": "electrical",
          "unit": "µW",
          "min": null,
          "typ": null,
          "max": 0.1,
          "conditions": "",
          "source_page": 169,
          "source": "datasheet"
        },
        {
          "name": "32 kHz ring oscillator frequency tolerance",
          "symbol": "fTOL",
          "kind": "tolerance",
          "unit": "ppm",
          "min": -500,
          "typ": null,
          "max": 500,
          "conditions": "",
          "source_page": 169,
          "source": "datasheet"
        },
        {
          "name": "PLL lock time",
          "symbol": "LOCKTIME",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 40,
          "conditions": "",
          "source_page": 170,
          "source": "datasheet"
        },
        {
          "name": "PLL turn-on / hop time",
          "symbol": "TOTIME",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "Including calibration",
          "source_page": 170,
          "source": "datasheet"
        },
        {
          "name": "Analog supply voltage (ADC)",
          "symbol": "VDDA",
          "kind": "electrical",
          "unit": "V",
          "min": 1.7,
          "typ": 3,
          "max": 3.6,
          "conditions": "",
          "source_page": 170,
          "source": "datasheet"
        },
        {
          "name": "Analog supply current (ADC)",
          "symbol": "IDDA, AVG",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 0.55,
          "conditions": "Average current during conversion",
          "source_page": 170,
          "source": "datasheet"
        },
        {
          "name": "Input pin voltage (ADC)",
          "symbol": "VINP, iNN",
          "kind": "electrical",
          "unit": "mV",
          "min": -50,
          "typ": null,
          "max": null,
          "conditions": "With input attenuator",
          "source_page": 170,
          "source": "datasheet"
        },
        {
          "name": "Analog temperature sensor temperature range",
          "symbol": "TRANGE",
          "kind": "electrical",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 105,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Error in temperature",
          "symbol": "TERR",
          "kind": "tolerance",
          "unit": "°C",
          "min": -4,
          "typ": 0,
          "max": 4,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Battery level indicator range",
          "symbol": "VBLTRANGE",
          "kind": "electrical",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Battery level indicator error",
          "symbol": "VBLTERR",
          "kind": "tolerance",
          "unit": "mV",
          "min": -150,
          "typ": null,
          "max": 150,
          "conditions": "After calibration",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Ascending battery level threshold 1",
          "symbol": "VABLT1",
          "kind": "electrical",
          "unit": "V",
          "min": 2.56,
          "typ": 2.72,
          "max": 2.88,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Descending battery level threshold 1",
          "symbol": "VDBLT1",
          "kind": "electrical",
          "unit": "V",
          "min": 2.48,
          "typ": 2.64,
          "max": 2.8,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Ascending battery level threshold 2",
          "symbol": "VABLT2",
          "kind": "electrical",
          "unit": "V",
          "min": 2.37,
          "typ": 2.52,
          "max": 2.67,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Descending battery level threshold 2",
          "symbol": "VDBLT2",
          "kind": "electrical",
          "unit": "V",
          "min": 2.3,
          "typ": 2.45,
          "max": 2.6,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "Ascending battery level threshold 3",
          "symbol": "VABLT3",
          "kind": "electrical",
          "unit": "V",
          "min": 2.2,
          "typ": 2.32,
          "max": 2.475,
          "conditions": "",
          "source_page": 171,
          "source": "datasheet"
        },
        {
          "name": "DC voltage low-level output (digital I/O)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 3 mA",
          "source_page": 164,
          "source": "datasheet"
        },
        {
          "name": "Pull-down value (1.8 V supply)",
          "symbol": "RPD",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 117,
          "typ": 202,
          "max": 363,
          "conditions": "Digital input and output when 1.8 V supply",
          "source_page": 113,
          "source": "datasheet"
        },
        {
          "name": "Pull-up value (1.8 V supply)",
          "symbol": "RPU",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 135,
          "typ": 211,
          "max": 334,
          "conditions": "Digital input and output when 1.8 V supply",
          "source_page": 113,
          "source": "datasheet"
        },
        {
          "name": "Pull-down value (3.3 V supply)",
          "symbol": "RPD",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 53,
          "typ": 84,
          "max": 144,
          "conditions": "Digital input and output when 3.3V supply",
          "source_page": 113,
          "source": "datasheet"
        },
        {
          "name": "Pull-up value (3.3 V supply)",
          "symbol": "RPU",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 57,
          "typ": 81,
          "max": 122,
          "conditions": "Digital input and output when 3.3V supply",
          "source_page": 113,
          "source": "datasheet"
        },
        {
          "name": "Page erase time",
          "symbol": "",
          "kind": "timing",
          "unit": "ms",
          "min": 21.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Mass erase time",
          "symbol": "",
          "kind": "timing",
          "unit": "ms",
          "min": 21.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Program time WRITE",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 44,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Program time BURSTWRITE",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 44,
          "typ": null,
          "max": null,
          "conditions": "1 word",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Program time BURSTWRITE",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 65,
          "typ": null,
          "max": null,
          "conditions": "2 words",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Program time BURSTWRITE",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 86,
          "typ": null,
          "max": null,
          "conditions": "3 words",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Program time BURSTWRITE",
          "symbol": "",
          "kind": "timing",
          "unit": "µs",
          "min": 107,
          "typ": null,
          "max": null,
          "conditions": "4 words",
          "source_page": 108,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-ambient",
          "symbol": "Rthj-amb",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 34,
          "max": null,
          "conditions": "QFN32 package",
          "source_page": 161,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-case",
          "symbol": "Rthj-c",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 2.5,
          "max": null,
          "conditions": "QFN32 package",
          "source_page": 161,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bluenrg-132"
  ],
  "discovery_pitch": "BLUENRG-132 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bluenrg-132.kicad_sym",
    "bluenrg-132.kicad_mod",
    "bluenrg-132.glb",
    "bluenrg-132.step",
    "bluenrg-132.lbr",
    "docs/hero.png",
    "docs/bluenrg-132-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bluenrg-132-hero.glb",
    "bluenrg-132-hero.overlay.json",
    "bluenrg-132-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}