component
BL9161G-28BADRN
Public Made by Adomby adom
BL Shanghai Belling Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN1x1-4L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBL9161G-28BADRN
BL Shanghai Belling · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN1x1-4L
BL9161G-28BADRN from BL Shanghai Belling, in a DFN1x1-4L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output voltage of the LDO regulator, rated for up to 300mA output current. |
| 2 | GND | power_in | Ground pin; the datasheet asks for separate ground planes for VIN and VOUT, each connected only at the GND pin. |
| 3 | EN | input | Chip enable with an internal pull-down resistor; the LDO turns on when EN is above 1.2V and shuts down when EN falls below 0.4V, with an absolute maximum of -0.3V to VIN. |
| 4 | VIN | power_in | Power input voltage; operating range is 2.2V to 6V, with an absolute maximum of 6V. |
| 5 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | DFN1x1-4L |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
BL9161G-28BADRN - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN1x1-4L (KiCad packages3D, STEP)
- 3D model files:
bl9161g-28badrn-etched.step/bl9161g-28badrn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl9161g-28badrn.step/bl9161g-28badrn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL Shanghai Belling datasheet (12 pp, sha256
1f5c35b45955d0cb, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).