component
BL8518CB3TR263DC
Public Made by Adomby adom
BL Shanghai Belling Supervisor and Reset ICs, SOT-23. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBL8518CB3TR263DC
BL Shanghai Belling · Supervisor and Reset ICs · SOT-23
BL8518CB3TR263DC from BL Shanghai Belling, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference pin. Tie to system 0 V / GND. |
| 2 | VOUT | output | Voltage-detection output, active-low CMOS push-pull (C suffix). Drives low (VSS) when VDD falls below the 2.63 V detector threshold, and returns high (equal to VDD) after Tdelay = 200 ms typical once VDD rises above the threshold. Output is undefined when VDD < VDDL (~0.5 V). |
| 3 | VDD | power_in | Supply voltage input and monitored rail. Recommended operating range 1.2 V to 6 V; absolute maximum 8 V. This is also the voltage being sensed against the internal 2.63 V threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | BL Shanghai Belling |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
BL8518CB3TR263DCBL8518CB3TR263DNBL8518CB3TR293DCBL8518CB3TR293DNBL8518CB3TR263DCCB3BTR263DCBL8518CB3TR263DCCB3BTR263DNBL8518CB3TR263DCCB3BTR293DCBL8518CB3TR263DCCB3BTR293DN
CAD (KiCad official)
- Symbol:
BL8518CB3TR263DC - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
bl8518cb3tr263dc-etched.step/bl8518cb3tr263dc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bl8518cb3tr263dc.step/bl8518cb3tr263dc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: BL Shanghai Belling datasheet (7 pp, sha256
4f4f63773eb3a024, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).