BL8072CLTR33

{
 "schema": "adom.pads/1",
 "slug": "bl8072cltr33",
 "footprint": "SOT-223-3_TabPin2",
 "generated_from": {
  "footprint": "SOT-223-3_TabPin2@sha256:8ae5f03e2c16377a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -3.15,
   -2.3
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-223-3_TabPin2@sha256:8ae5f03e2c16377a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    -2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "Vss/ADJ",
   "type": "power_in",
   "description": "Ground / adjust pin. Tie to GND for fixed-voltage operation. In adjustable mode, connect the mid-point of the external resistor divider (R1 to Vout, R2 to GND) here to set Vout = Vref × (1 + R2/R1). Adjust pin current I_ADJ is typically ~2 µA. R1 is normally 1 kΩ-10 kΩ; a 0.1 µF ceramic bypass cap between this pin and GND improves ripple rejection.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-223-3_TabPin2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VOUT",
   "type": "power_out",
   "description": "Regulated output. Delivers up to 2 A within ±2% of the nominal set voltage (customized 1.2V-5.0V in 0.1V steps; this suffix -33 => 3.3V). A 1 µF ceramic output capacitor to GND is required for stability. Typical dropout is 850 mV at 1.5 A for Vout ≥ 2.0V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-3_TabPin2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.15,
    2.3
   ],
   "rot": 0.0,
   "size": [
    2.0,
    1.5
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VDD",
   "type": "power_in",
   "description": "Unregulated input supply. Recommended operating range up to 18V (absolute max 20V). Requires a 1 µF ceramic bypass capacitor to GND placed close to the pin. Input must exceed Vout by at least the dropout voltage to maintain regulation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-3_TabPin2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}